This hack was introduced to reduce the amount of warnings that users
would get while transitioning to the new settings format
(https://github.com/astral-sh/ruff/pull/19787) but now that we're near
the beta release, it would be good to remove this.
Specifically, the [`if_not_else`] lint will sometimes flag
code to change the order of `if` and `else` bodies if this
would allow a `!` to be removed. While perhaps tasteful in
some cases, there are many cases in my experience where this
bows to other competing concerns that impact readability.
(Such as the relative sizes of the `if` and `else` bodies,
or perhaps an ordering that just makes the code flow in a
more natural way.)
[`if_not_else`]: https://rust-lang.github.io/rust-clippy/master/index.html#/if_not_else
Instead of waiting to land auto-import until it is "ready
for users," it'd be nicer to get incremental progress merged
to `main`. By making it an experimental opt-in, we avoid making
the default completion experience worse but permit developers
and motivated users to try it.
This change rejiggers how we register globs for file watching with the
LSP client. Previously, we registered a few globs like `**/*.py`,
`**/pyproject.toml` and more. There were two problems with this
approach.
Firstly, it only watches files within the project root. Search paths may
be outside the project root. Such as virtualenv directory.
Secondly, there is variation on how tools interact with virtual
environments. In the case of uv, depending on its link mode, we might
not get any file change notifications after running `uv add foo` or
`uv remove foo`.
To remedy this, we instead just list for file change notifications on
all files for all search paths. This simplifies the globs we use, but
does potentially increase the number of notifications we'll get.
However, given the somewhat simplistic interface supported by the LSP
protocol, I think this is unavoidable (unless we used our own file
watcher, which has its own considerably downsides). Moreover, this is
seemingly consistent with how `ty check --watch` works.
This also required moving file watcher registration to *after*
workspaces are initialized, or else we don't know what the right search
paths are.
This change is in service of #19883, which in order for cache
invalidation to work right, the LSP client needs to send notifications
whenever a dependency is added or removed. This change should make that
possible.
I tried this patch with #19883 in addition to my work to activate Salsa
caching, and everything seems to work as I'd expect. That is,
completions no longer show stale results after a dependency is added or
removed.
## Summary
This is a small refactor to update the server to send a single request
to perform registrations and unregistrations of dynamic capabilities.
## Test Plan
Existing E2E test cases pass, add a new test case to verify multiple
registrations.
## Summary
This PR is a follow-up from https://github.com/astral-sh/ruff/pull/19551
and adds a new `ty.experimental.rename` setting to conditionally
register for the rename capability. The complementary PR in ty VS Code
extension is https://github.com/astral-sh/ty-vscode/pull/111.
This is done using dynamic registration after the settings have been
resolved. The experimental group is part of the global settings because
they're applied for all workspaces that are managed by the client.
## Test Plan
Add E2E tests.
In VS Code, with the following setting:
```json
{
"ty.experimental.rename": "true",
"python.languageServer": "None"
}
```
I get the relevant log entry:
```
2025-08-07 16:05:40.598709000 DEBUG client_response{id=3 method="client/registerCapability"}: Registered rename capability
```
And, I'm able to rename a symbol. Once I set it to `false`, then I can
see this log entry:
```
2025-08-07 16:08:39.027876000 DEBUG Rename capability is disabled in the client settings
```
And, I don't see the "Rename Symbol" open in the VS Code dropdown.
https://github.com/user-attachments/assets/501659df-ba96-4252-bf51-6f22acb4920b
## Summary
This PR updates the client settings handling to recognize unknown
options provided by the user and show a warning popup along with a
warning log message.
## Test Plan
Add E2E tests.
## Summary
This PR implements support for providing LSP client settings.
The complementary PR in the ty VS Code extension:
astral-sh/ty-vscode#106.
Notes for the previous iteration of this PR is in
https://github.com/astral-sh/ruff/pull/19614#issuecomment-3136477864
(click on "Details").
Specifically, this PR splits the client settings into 3 distinct groups.
Keep in mind that these groups are not visible to the user, they're
merely an implementation detail. The groups are:
1. `GlobalOptions` - these are the options that are global to the
language server and will be the same for all the workspaces that are
handled by the server
2. `WorkspaceOptions` - these are the options that are specific to a
workspace and will be applied only when running any logic for that
workspace
3. `InitializationOptions` - these are the options that can be specified
during initialization
The initialization options are a superset that contains both the global
and workspace options flattened into a 1-dimensional structure. This
means that the user can specify any and all fields present in
`GlobalOptions` and `WorkspaceOptions` in the initialization options in
addition to the fields that are _specific_ to initialization options.
From the current set of available settings, following are only available
during initialization because they are required at that time, are static
during the runtime of the server and changing their values require a
restart to take effect:
- `logLevel`
- `logFile`
And, following are available under `GlobalOptions`:
- `diagnosticMode`
And, following under `WorkspaceOptions`:
- `disableLanguageServices`
- `pythonExtension` (Python environment information that is populated by
the ty VS Code extension)
### `workspace/configuration`
This request allows server to ask the client for configuration to a
specific workspace. But, this is only supported by the client that has
the `workspace.configuration` client capability set to `true`. What to
do for clients that don't support pulling configurations?
In that case, the settings needs to be provided in the initialization
options and updating the values of those settings can only be done by
restarting the server. With the way this is implemented, this means that
if the client does not support pulling workspace configuration then
there's no way to specify settings specific to a workspace. Earlier,
this would've been possible by providing an array of client options with
an additional field which specifies which workspace the options belong
to but that adds complexity and clients that actually do not support
`workspace/configuration` would usually not support multiple workspaces
either.
Now, for the clients that do support this, the server will initiate the
request to get the configuration for all the workspaces at the start of
the server. Once the server receives these options, it will resolve them
for each workspace as follows:
1. Combine the client options sent during initialization with the
options specific to the workspace creating the final client options
that's specific to this workspace
2. Create a global options by combining the global options from (1) for
all workspaces which in turn will also combine the global options sent
during initialization
The global options are resolved into the global settings and are
available on the `Session` which is initialized with the default global
settings. The workspace options are resolved into the workspace settings
and are available on the respective `Workspace`.
The `SessionSnapshot` contains the global settings while the document
snapshot contains the workspace settings. We could add the global
settings to the document snapshot but that's currently not needed.
### Document diagnostic dynamic registration
Currently, the document diagnostic server capability is created based on
the `diagnosticMode` sent during initialization. But, that wouldn't
provide us with the complete picture. This means the server needs to
defer registering the document diagnostic capability at a later point
once the settings have been resolved.
This is done using dynamic registration for clients that support it. For
clients that do not support dynamic registration for document diagnostic
capability, the server advertises itself as always supporting workspace
diagnostics and work done progress token.
This dynamic registration now allows us to change the server capability
for workspace diagnostics based on the resolved `diagnosticMode` value.
In the future, once `workspace/didChangeConfiguration` is supported, we
can avoid the server restart when users have changed any client
settings.
## Test Plan
Add integration tests and recorded videos on the user experience in
various editors:
### VS Code
For VS Code users, the settings experience is unchanged because the
extension defines it's own interface on how the user can specify the
server setting. This means everything is under the `ty.*` namespace as
usual.
https://github.com/user-attachments/assets/c2e5ba5c-7617-406e-a09d-e397ce9c3b93
### Zed
For Zed, the settings experience has changed. Users can specify settings
during initialization:
```json
{
"lsp": {
"ty": {
"initialization_options": {
"logLevel": "debug",
"logFile": "~/.cache/ty.log",
"diagnosticMode": "workspace",
"disableLanguageServices": true
}
},
}
}
```
Or, can specify the options under the `settings` key:
```json
{
"lsp": {
"ty": {
"settings": {
"ty": {
"diagnosticMode": "openFilesOnly",
"disableLanguageServices": true
}
},
"initialization_options": {
"logLevel": "debug",
"logFile": "~/.cache/ty.log"
}
},
}
}
```
The `logLevel` and `logFile` setting still needs to go under the
initialization options because they're required by the server during
initialization.
We can remove the nesting of the settings under the "ty" namespace by
updating the return type of
db9ea0cdfd/src/tychecker.rs (L45-L49)
to be wrapped inside `ty` directly so that users can avoid doing the
double nesting.
There's one issue here which is that if the `diagnosticMode` is
specified in both the initialization option and settings key, then the
resolution is a bit different - if either of them is set to be
`workspace`, then it wins which means that in the following
configuration, the diagnostic mode is `workspace`:
```json
{
"lsp": {
"ty": {
"settings": {
"ty": {
"diagnosticMode": "openFilesOnly"
}
},
"initialization_options": {
"diagnosticMode": "workspace"
}
},
}
}
```
This behavior is mainly a result of combining global options from
various workspace configuration results. Users should not be able to
provide global options in multiple workspaces but that restriction
cannot be done on the server side. The ty VS Code extension restricts
these global settings to only be set in the user settings and not in
workspace settings but we do not control extensions in other editors.
https://github.com/user-attachments/assets/8e2d6c09-18e6-49e5-ab78-6cf942fe1255
### Neovim
Same as in Zed.
### Other
Other editors that do not support `workspace/configuration`, the users
would need to provide the server settings during initialization.
## Summary
Closes: astral-sh/ty#88
This PR implements an initial version of a mock language server that can
be used to write e2e tests using the real server running in the
background.
The way it works is that you'd use the `TestServerBuilder` to help
construct the `TestServer` with the setup data. This could be the
workspace folders, populating the file and it's content in the memory
file system, setting the right client capabilities to make the server
respond correctly, etc. This can be expanded as we write more test
cases.
There are still a few things to follow-up on:
- ~In the `Drop` implementation, we should assert that there are no
pending notification, request and responses from the server that the
test code hasn't handled yet~ Implemented in [`afd1f82`
(#19391)](afd1f82bde)
- Reduce the setup boilerplate in any way we can
- Improve the final assertion, currently I'm just snapshotting the final
output
## Test Plan
Written a few test cases.
## Summary
This PR updates the server to keep track of open files both system and
virtual files.
This is done by updating the project by adding the file in the open file
set in `didOpen` notification and removing it in `didClose`
notification.
This does mean that for workspace diagnostics, ty will only check open
files because the behavior of different diagnostic builder is to first
check `is_file_open` and only add diagnostics for open files. So, this
required updating the `is_file_open` model to be `should_check_file`
model which validates whether the file needs to be checked based on the
`CheckMode`. If the check mode is open files only then it will check
whether the file is open. If it's all files then it'll return `true` by
default.
Closes: astral-sh/ty#619
## Test Plan
### Before
There are two files in the project: `__init__.py` and `diagnostics.py`.
In the video, I'm demonstrating the old behavior where making changes to
the (open) `diagnostics.py` file results in re-parsing the file:
https://github.com/user-attachments/assets/c2ac0ecd-9c77-42af-a924-c3744b146045
### After
Same setup as above.
In the video, I'm demonstrating the new behavior where making changes to
the (open) `diagnostics.py` file doesn't result in re-parting the file:
https://github.com/user-attachments/assets/7b82fe92-f330-44c7-b527-c841c4545f8f
## Summary
This PR updates the `ResolvedClientCapabilities` to be represented as
`bitflags`. This allows us to remove the `Arc` as the type becomes copy.
Additionally, this PR also fixed the goto definition and declaration
code to use the `textDocument.definition.linkSupport` and
`textDocument.declaration.linkSupport` client capability.
This PR also removes the unused client capabilities which are
`code_action_deferred_edit_resolution`, `apply_edit`, and
`document_changes` which are all related to auto-fix ability.
## Summary
Previously, the virtual files were being added to the default database
that's present on the session. This is wrong because the default
database is for any files that don't belong to any project i.e., they're
outside of any projects managed by the server. Virtual files are neither
part of the project nor it is outside the projects. This was not the
intention as in the initial version, virtual files were being added to
the only project database managed by the server.
This PR fixes this by reverting back to the original behavior where
virtual files will be added to the only project database present. When
support for multiple workspace and project is added, this will require
updating (https://github.com/astral-sh/ty/issues/794).
This is required for #19264 because workspace diagnostics doesn't check
the default project database yet. Ideally, the default db should be
checked as well.
The implementation of this PR means that virtual files are now being
included for workspace diagnostics but it doesn't work completely e.g.,
if I save an untitled file the diagnostics disappears but it doesn't
appear back for the (now) saved file on disk as shown in the following
video demonstration:
https://github.com/user-attachments/assets/123e8d20-1e95-4c7d-b7eb-eb65be8c476e
## Summary
This PR removes the `FileLookupError` as it's not really required. The
original intention was that this would be returned from the `.file`
lookup to the different handlers but we've since moved the logic of
"lookup file and add trace message if file unavailable with the reason"
under the `file_ok` method which all of the handlers use.
## Summary
This PR fixes a bug that didn't return a response to the client if the
document snapshotting failed.
This is resolved by making sure that the server always creates the
document snapshot and embed the any failures inside the snapshot.
Closes: astral-sh/ty#798
## Test Plan
Using the test case as described in the linked issue:
https://github.com/user-attachments/assets/f32833f8-03e5-4641-8c7f-2a536fe2e270
This PR addresses the post-merge review comments from
https://github.com/astral-sh/ruff/pull/19041, specifically it:
- Rename `WorkspaceSnapshot` to `SessionSnapshot`
- Rename `take_workspace_snapshot` to `take_session_snapshot`
- Rename `take_snapshot` to `take_document_snapshot`
- Move `AssertUnwindSafe` closer to the `catch_unwind` call which
requires the assertion
## Summary
This PR adds initial support for workspace diagnostics in the ty server.
Reference spec:
https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#workspace_diagnostic
This is currently implemented via the **pull diagnostics method** which
was added in the current version (3.17) and the server advertises it via
the `diagnosticProvider.workspaceDiagnostics` server capability.
**Note:** This might be a bit confusing but a workspace diagnostics is
not for a single workspace but for all the workspaces that the server
handles. These are the ones that the server received during
initialization. Currently, the ty server doesn't support multiple
workspaces so this capability is also limited to provide diagnostics
only for a single workspace (the first one if the client provided
multiple).
A new `ty.diagnosticMode` server setting is added which can be either
`workspace` (for workspace diagnostics) or `openFilesOnly` (for checking
only open files) (default). This is same as
`python.analysis.diagnosticMode` that Pyright / Pylance utilizes. In the
future, we could use the value under `python.*` namespace as fallback to
improve the experience on user side to avoid setting the value multiple
times.
Part of: astral-sh/ty#81
## Test Plan
This capability was introduced in the current LSP version (~3 years) and
the way it's implemented by various clients are a bit different. I've
provided notes on what I've noticed and what would need to be done on
our side to further improve the experience.
### VS Code
VS Code sends the `workspace/diagnostic` requests every ~2 second:
```
[Trace - 12:12:32 PM] Sending request 'workspace/diagnostic - (403)'.
[Trace - 12:12:32 PM] Received response 'workspace/diagnostic - (403)' in 2ms.
[Trace - 12:12:34 PM] Sending request 'workspace/diagnostic - (404)'.
[Trace - 12:12:34 PM] Received response 'workspace/diagnostic - (404)' in 2ms.
[Trace - 12:12:36 PM] Sending request 'workspace/diagnostic - (405)'.
[Trace - 12:12:36 PM] Received response 'workspace/diagnostic - (405)' in 2ms.
[Trace - 12:12:38 PM] Sending request 'workspace/diagnostic - (406)'.
[Trace - 12:12:38 PM] Received response 'workspace/diagnostic - (406)' in 3ms.
[Trace - 12:12:40 PM] Sending request 'workspace/diagnostic - (407)'.
[Trace - 12:12:40 PM] Received response 'workspace/diagnostic - (407)' in 2ms.
...
```
I couldn't really find any resource that explains this behavior. But,
this does mean that we'd need to implement the caching layer via the
previous result ids sooner. This will allow the server to avoid sending
all the diagnostics on every request and instead just send a response
stating that the diagnostics hasn't changed yet. This could possibly be
achieved by using the salsa ID.
If we switch from workspace diagnostics to open-files diagnostics, the
server would send the diagnostics only via the `textDocument/diagnostic`
endpoint. Here, when a document containing the diagnostic is closed, the
server would send a publish diagnostics notification with an empty list
of diagnostics to clear the diagnostics from that document. The issue is
the VS Code doesn't seem to be clearing the diagnostics in this case
even though it receives the notification. (I'm going to open an issue on
VS Code side for this today.)
https://github.com/user-attachments/assets/b0c0833d-386c-49f5-8a15-0ac9133e15ed
### Zed
Zed's implementation works by refreshing the workspace diagnostics
whenever the content of the documents are changed. This seems like a
very reasonable behavior and I was a bit surprised that VS Code didn't
use this heuristic.
https://github.com/user-attachments/assets/71c7b546-7970-434a-9ba0-4fa620647f6c
### Neovim
Neovim only recently added support for workspace diagnostics
(https://github.com/neovim/neovim/pull/34262, merged ~3 weeks ago) so
it's only available on nightly versions.
The initial support is limited and requires fetching the workspace
diagnostics manually as demonstrated in the video. It doesn't support
refreshing the workspace diagnostics either, so that would need to be
done manually as well. I'm assuming that these are just a temporary
limitation and will be implemented before the stable release.
https://github.com/user-attachments/assets/25b4a0e5-9833-4877-88ad-279904fffaf9
## Summary
This PR adds a new trait to support running a request in the background.
Currently, there exists a `BackgroundDocumentRequestHandler` trait which
is similar but is scoped to a specific document (file in an editor
context). The new trait `BackgroundRequestHandler` is not tied to a
specific document nor a specific project but it's for the entire
workspace.
This is added to support running workspace wide requests like computing
the [workspace
diagnostics](https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#workspace_diagnostic)
or [workspace
symbols](https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#workspace_symbol).
**Note:** There's a slight difference with what a "workspace" means
between the server and ty. Currently, there's a 1-1 relationship between
a workspace in an editor and the project database corresponding to that
workspace in ty but this could change in the future when Micha adds
support for multiple workspaces or multi-root workspaces.
The data that would be required by the request handler (based on
implementing workspace diagnostics) is the list of databases
(`ProjectDatabse`) corresponding to the projects in the workspace and
the index (`Index`) that contains the open documents. The
`WorkspaceSnapshot` represents this and is passed to the handler similar
to `DocumentSnapshot`.
## Test Plan
This is used in implementing the workspace diagnostics which is where
this is tested.
## Summary
This PR makes the necessary changes to the server that it can request
configurations from the client using the `configuration` request.
This PR doesn't make use of the request yet. It only sets up the
foundation (mainly the coordination between client and server)
so that future PRs could pull specific settings.
I plan to use this for pulling the Python environment from the Python
extension.
Deno does something very similar to this.
## Test Plan
Tested that diagnostics are still shown.
## Summary
PR adding support for it in the VS Code extension:
https://github.com/astral-sh/ty-vscode/pull/36
This PR adds support for `python.ty.disableLanguageServices` to the ty
language server by accepting this as server setting.
This has the same issue as https://github.com/astral-sh/ty/issues/282 in
that it only works when configured globally. Fixing that requires
support for multiple workspaces in the server itself.
I also went ahead and did a similar refactor as the Ruff server to use
"Options" and "Settings" to keep the code consistent although the
combine functionality doesn't exists yet because workspace settings
isn't supported in the ty server.
## Test Plan
Refer to https://github.com/astral-sh/ty-vscode/pull/36 for the test
demo.
Specifically, this PR reverts "Make completions an opt-in LSP feature
(#17921)",
corresponding to commit 51e2effd2d.
In practice, this means you don't need to opt into completions working
by enabling experimental features. i.e., I was able to remove this from
my LSP configuration:
```
"experimental": {
"completions": {
"enable": true
}
},
```
There's still a lot of work left to do to make completions awesome, but
I think it's in a state where it would be useful to get real user
feedback. It's also meaningfully using ty to provide completions that
use type information.
Ref astral-sh/ty#86
## Summary
We now expect the client to send initialization options to opt-in to
experimental (but LSP-standardized) features, like completion support.
Specifically, the client should set `"experimental.completions.enable":
true`.
Closes https://github.com/astral-sh/ty/issues/74.
Micha Reiser
Dhruv Manilawala
Andrew Gallant
Aria Desires
Charlie Marsh