Split out from the large test refactoring PR. Use `normalized_display`
in tests and two more thiserror derives to match snapshots and output,
and other small windows fixes.
## Summary
This PR adds support for `--find-links`, `--index-url`, and
`--extra-index-url` arguments when specified in a `requirements.txt`.
It's a mostly-straightforward change. The only uncertain piece is what
to do when multiple files include these flags, and/or when we include
them on the CLI and in other files.
In general:
- If _anything_ specifies `--no-index`, we respect it.
- We combine all `--extra-index-url` and `--find-links` across all
sources, since those are just vectors.
- If we see multiple `--index-url` in requirements files, we error.
- We respect the `--index-url` from the command line over any provided
in a requirements file.
(`pip-compile` seems to just pick one semi-arbitrarily when multiple are
provided.)
Closes https://github.com/astral-sh/puffin/issues/1143.
Less verbose span fields for `Dist`s by using the display impl and no
more min length in the tracing durations plot config for comparability
(we lose spans due to a speedup otherwise). Both wait points in the
solver loop are now instrumented so we can inspect what we're waiting
for to progress in the solver.
This PR adds initial support for [rkyv] to puffin. In particular,
the main aim here is to make puffin-client's `SimpleMetadata` type
possible to deserialize from a `&[u8]` without doing any copies. This
PR **stops short of actuallying doing that zero-copy deserialization**.
Instead, this PR is about adding the necessary trait impls to a variety
of types, along with a smattering of small refactorings to make rkyv
possible to use.
For those unfamiliar, rkyv works via the interplay of three traits:
`Archive`, `Serialize` and `Deserialize`. The usual flow of things is
this:
* Make a type `T` implement `Archive`, `Serialize` and `Deserialize`.
rkyv
helpfully provides `derive` macros to make this pretty painless in most
cases.
* The process of implementing `Archive` for `T` *usually* creates an
entirely
new distinct type within the same namespace. One can refer to this type
without naming it explicitly via `Archived<T>` (where `Archived` is a
clever
type alias defined by rkyv).
* Serialization happens from `T` to (conceptually) a `Vec<u8>`. The
serialization format is specifically designed to reflect the in-memory
layout
of `Archived<T>`. Notably, *not* `T`. But `Archived<T>`.
* One can then get an `Archived<T>` with no copying (albeit, we will
likely
need to incur some cost for validation) from the previously created
`&[u8]`.
This is quite literally [implemented as a pointer cast][rkyv-ptr-cast].
* The problem with an `Archived<T>` is that it isn't your `T`. It's
something
else. And while there is limited interoperability between a `T` and an
`Archived<T>`, the main issue is that the surrounding code generally
demands
a `T` and not an `Archived<T>`. **This is at the heart of the tension
for
introducing zero-copy deserialization, and this is mostly an intrinsic
problem to the technique and not an rkyv-specific issue.** For this
reason,
given an `Archived<T>`, one can get a `T` back via an explicit
deserialization step. This step is like any other kind of
deserialization,
although generally faster since no real "parsing" is required. But it
will
allocate and create all necessary objects.
This PR largely proceeds by deriving the three aforementioned traits
for `SimpleMetadata`. And, of course, all of its type dependencies. But
we stop there for now.
The main issue with carrying this work forward so that rkyv is actually
used to deserialize a `SimpleMetadata` is figuring out how to deal
with `DataWithCachePolicy` inside of the cached client. Ideally, this
type would itself have rkyv support, but adding it is difficult. The
main difficulty lay in the fact that its `CachePolicy` type is opaque,
not easily constructable and is internally the tip of the iceberg of
a rat's nest of types found in more crates such as `http`. While one
"dumb"-but-annoying approach would be to fork both of those crates
and add rkyv trait impls to all necessary types, it is my belief that
this is the wrong approach. What we'd *like* to do is not just use
rkyv to deserialize a `DataWithCachePolicy`, but we'd actually like to
get an `Archived<DataWithCachePolicy>` and make actual decisions used
the archived type directly. Doing that will require some work to make
`Archived<DataWithCachePolicy>` directly useful.
My suspicion is that, after doing the above, we may want to mush
forward with a similar approach for `SimpleMetadata`. That is, we want
`Archived<SimpleMetadata>` to be as useful as possible. But right
now, the structure of the code demands an eager conversion (and thus
deserialization) into a `SimpleMetadata` and then into a `VersionMap`.
Getting rid of that eagerness is, I think, the next step after dealing
with `DataWithCachePolicy` to unlock bigger wins here.
There are many commits in this PR, but most are tiny. I still encourage
review to happen commit-by-commit.
[rkyv]: https://rkyv.org/
[rkyv-ptr-cast]:
https://docs.rs/rkyv/latest/src/rkyv/util/mod.rs.html#63-68
## Summary
This PR adds a `NormalizedDisplay` trait that we can use for user-facing
paths, to strip the UNC prefix on Windows.
On other platforms, the implementation is a no-op (vs. `Display`).
I audited all usages of `.display()`, and changed any that were
user-facing, either via `println!` or `eprintln!`, or by way of being
included in error messages. I did _not_ change uses that were only in
tests or only went to tracing.
Closes https://github.com/astral-sh/puffin/issues/1084.
## Summary
First batch of changes for windows support. Notable changes:
* Fixes all compile errors and added windows specific paths.
* Working venv creation on windows, both from a base interpreter and
from a venv. This requires querying `stdlib` from the sysconfig paths to
find the launcher.
* Basic url/path conversion handling for windows.
* `if cfg!(...)` instead of `#[cfg()]`. This should make it easier to
keep everything compiling across platforms.
## Outlook
Test summary: 402 tests run: 299 passed (15 slow), 103 failed, 1 skipped
There are various reason for the remaining test failure:
* Windows-specific colorama and tzdata dependencies that change the
snapshot slightly. This is by far the biggest batch.
* Some url-path handling issues. I fixed some in the PR, some remain.
* Lack of the latest python patch versions for older pythons on my
machine, since there are no builds for windows and we need to register
them in the registry for them to be picked up for `py --list-paths` (CC
@zanieb RE #1070).
* Lack of entrypoint launchers.
* ... likely more
## Summary
I don't know if this is actually a good change, but it tries to make the
editable install experience more consistent. Specifically, we now
support...
```
# Use a relative path with a `file://` prefix.
# Prior to this PR, we supported `file:../foo`, but not `file://../foo`, which felt inconsistent.
-e file://../foo
# Use environment variables with paths, not just URLs.
# Prior to this PR, we supported `file://${PROJECT_ROOT}/../foo`, but not the below.
-e ${PROJECT_ROOT}/../foo
```
Importantly, `-e file://../foo` is actually not supported by pip... `-e
file:../foo` _is_ supported though. We support both, as of this PR. Open
to feedback.
On top of https://github.com/astral-sh/puffin/pull/947, we can also box
`PrioritizedDistribution`.
In a simple benchmark, this seems to slightly improve performance when
comparing only this commit to main, even though the benchmark is too
noisy to establish significance:
```
$ hyperfine --warmup 30 --runs 300 "target/profiling/main-dev resolve meine_stadt_transparent" "target/profiling/puffin-dev resolve meine_stadt_transparent"
Benchmark 1: target/profiling/main-dev resolve meine_stadt_transparent
Time (mean ± σ): 83.6 ms ± 2.0 ms [User: 77.7 ms, System: 20.0 ms]
Range (min … max): 81.4 ms … 98.2 ms 300 runs
Warning: Statistical outliers were detected. Consider re-running this benchmark on a quiet system without any interferences from other programs. It might help to use the '--warmup' or '--prepare' options.
Benchmark 2: target/profiling/puffin-dev resolve meine_stadt_transparent
Time (mean ± σ): 80.8 ms ± 2.2 ms [User: 75.4 ms, System: 19.5 ms]
Range (min … max): 78.6 ms … 98.6 ms 300 runs
Warning: Statistical outliers were detected. Consider re-running this benchmark on a quiet system without any interferences from other programs. It might help to use the '--warmup' or '--prepare' options.
Summary
target/profiling/puffin-dev resolve meine_stadt_transparent ran
1.03 ± 0.04 times faster than target/profiling/main-dev resolve meine_stadt_transparent
```
The effect on type sizes however is considerable ([downstack
PR](https://gist.github.com/konstin/38e6c774db541db46d61f1d4ea6b498f)
vs. [this
PR](https://gist.github.com/konstin/003a77fe7d7d246b0d535e3fc843cb36)):
```patch
--- branch.txt 2024-01-17 14:26:01.826085176 +0100
+++ boxed-prioritized-dist.txt 2024-01-17 14:25:57.101900963 +0100
@@ -1,19 +1,3 @@
-9264 alloc::collections::btree::node::InternalNode<pep440_rs::version::Version, distribution_types::PrioritizedDistribution> align=8
- 9168 data
- 96 edges
-
-9264 alloc::collections::btree::node::InternalNode<pep440_rs::Version, distribution_types::PrioritizedDistribution> align=8
- 9168 data
- 96 edges
-
-9168 alloc::collections::btree::node::LeafNode<pep440_rs::version::Version, distribution_types::PrioritizedDistribution> align=8
- 9064 vals
- 88 keys
-
-9168 alloc::collections::btree::node::LeafNode<pep440_rs::Version, distribution_types::PrioritizedDistribution> align=8
- 9064 vals
- 88 keys
-
8992 tokio::sync::mpsc::block::Block<hyper::client::dispatch::Envelope<http::request::Request<reqwest::async_impl::body::ImplStream>, http::response::Response<hyper::body::body::Body>>> align=8
8960 values
32 header
@@ -74,10 +58,23 @@
40 __tracing_attr_span
64 variant Unresumed, Returned, Panicked
+5648 {async fn body@crates/puffin-client/src/registry_client.rs:224:5: 224:30} align=8
+ 5647 variant Suspend0
+ 5576 __awaitee align=8
+ 40 __tracing_attr_span
```
This is https://github.com/astral-sh/puffin/pull/947 again but this time
merging into main instead of downstack, sorry for the noise.
---
Windows has a default stack size of 1MB, which makes puffin often fail
with stack overflows. The PR reduces stack size by three changes:
* Boxing `File` in `Dist`, reducing the size from 496 to 240.
* Boxing the largest futures.
* Boxing `CachePolicy`
## Method
Debugging happened on linux using
https://github.com/astral-sh/puffin/pull/941 to limit the stack size to
1MB. Used ran the command below.
```
RUSTFLAGS=-Zprint-type-sizes cargo +nightly build -p puffin-cli -j 1 > type-sizes.txt && top-type-sizes -w -s -h 10 < type-sizes.txt > sizes.txt
```
The main drawback is top-type-sizes not saying what the `__awaitee` is,
so it requires manually looking up with a future with matching size.
When the `brotli` features on `reqwest` is active, a lot of brotli types
show up. Toggling this feature however seems to have no effect. I assume
they are false positives since the `brotli` crate has elaborate control
about allocation. The sizes are therefore shown with the feature off.
## Results
The largest future goes from 12208B to 6416B, the largest type
(`PrioritizedDistribution`, see also #948) from 17448B to 9264B. Full
diff: https://gist.github.com/konstin/62635c0d12110a616a1b2bfcde21304f
For the second commit, i iteratively boxed the largest file until the
tests passed, then with an 800KB stack limit looked through the
backtrace of a failing test and added some more boxing.
Quick benchmarking showed no difference:
```console
$ hyperfine --warmup 2 "target/profiling/main-dev resolve meine_stadt_transparent" "target/profiling/puffin-dev resolve meine_stadt_transparent"
Benchmark 1: target/profiling/main-dev resolve meine_stadt_transparent
Time (mean ± σ): 49.2 ms ± 3.0 ms [User: 39.8 ms, System: 24.0 ms]
Range (min … max): 46.6 ms … 63.0 ms 55 runs
Warning: Statistical outliers were detected. Consider re-running this benchmark on a quiet system without any interferences from other programs. It might help to use the '--warmup' or '--prepare' options.
Benchmark 2: target/profiling/puffin-dev resolve meine_stadt_transparent
Time (mean ± σ): 47.4 ms ± 3.2 ms [User: 41.3 ms, System: 20.6 ms]
Range (min … max): 44.6 ms … 60.5 ms 62 runs
Warning: Statistical outliers were detected. Consider re-running this benchmark on a quiet system without any interferences from other programs. It might help to use the '--warmup' or '--prepare' options.
Summary
target/profiling/puffin-dev resolve meine_stadt_transparent ran
1.04 ± 0.09 times faster than target/profiling/main-dev resolve meine_stadt_transparent
```
## Summary
I got confused by why `VerbatimUrl` was on `Path`. Since it's directly
computed from it, I think we should just compute it as-needed. I think
it's also possibly-buggy because the URL is the URL of the _directory_,
not the artifact itself, which differs from other distributions.
## Summary
This PR adds a release workflow powered by `cargo-dist`. It's similar to
the version that's PR'd in Ruff
(https://github.com/astral-sh/ruff/pull/9559), with the exception that
it doesn't include the Docker build or the "update dependents" step for
pre-commit.
## Summary
This is a small correctness improvement that ensures that we avoid using
stale cache entries for local dependencies in the install plan. We
already have some logic like this in the source distribution builder,
but it didn't apply in the install plan, and so we'd end up using stale
wheels.
Specifically, now, if you create a new local wheel, and run `pip sync`,
we'll mark the cache entries as stale and make sure we unzip it and
install it. (If the wheel is _already_ installed, we won't reinstall it
though, which will be a separate change. This is just about reading from
the cache, not the environment.)
## Summary
It turns out that storing an absolute URL for every file caused a
significant performance regression. This PR attempts to address the
regression with two changes.
The first is that we now store the raw string if the URL is an absolute
URL. If the URL is relative, we store the base URL alongside the raw
relative string. As such, we avoid serializing and deserializing URLs
until we need them (later on), except for the base URL.
The second is that we now use the internal `Url` crate methods for
serializing and deserializing. If you look inside `Url`, its standard
serializer and deserialization actually convert it to a string, then
parse the string. But the crate exposes some other methods for faster
serialization and deserialization (with fewer guarantees). I think this
is totally fine since the cache is entirely internal.
If we _just_ change the `Url` serialization (and no other code -- so
continue to store URLs for every file), then the regression goes down to
about 5%:
```shell
❯ python -m scripts.bench \
--puffin-path ./target/release/main \
--puffin-path ./target/release/relative --puffin-path ./target/release/puffin \
scripts/requirements/home-assistant.in --benchmark resolve-warm
Benchmark 1: ./target/release/main (resolve-warm)
Time (mean ± σ): 496.3 ms ± 4.3 ms [User: 452.4 ms, System: 175.5 ms]
Range (min … max): 487.3 ms … 502.4 ms 10 runs
Benchmark 2: ./target/release/relative (resolve-warm)
Time (mean ± σ): 284.8 ms ± 2.1 ms [User: 245.8 ms, System: 165.6 ms]
Range (min … max): 280.3 ms … 288.0 ms 10 runs
Benchmark 3: ./target/release/puffin (resolve-warm)
Time (mean ± σ): 300.4 ms ± 3.2 ms [User: 255.5 ms, System: 178.1 ms]
Range (min … max): 295.4 ms … 305.1 ms 10 runs
Summary
'./target/release/relative (resolve-warm)' ran
1.05 ± 0.01 times faster than './target/release/puffin (resolve-warm)'
1.74 ± 0.02 times faster than './target/release/main (resolve-warm)'
```
So I considered _just_ making that change. But 5% is kind of
borderline...
With both of these changes, the regression is down to 1-2%:
```
Benchmark 1: ./target/release/relative (resolve-warm)
Time (mean ± σ): 282.6 ms ± 7.4 ms [User: 244.6 ms, System: 181.3 ms]
Range (min … max): 275.1 ms … 318.5 ms 30 runs
Benchmark 2: ./target/release/puffin (resolve-warm)
Time (mean ± σ): 286.8 ms ± 2.2 ms [User: 247.0 ms, System: 169.1 ms]
Range (min … max): 282.3 ms … 290.7 ms 30 runs
Summary
'./target/release/relative (resolve-warm)' ran
1.01 ± 0.03 times faster than './target/release/puffin (resolve-warm)'
```
It's consistently ~2%-ish, but at this point it's unclear if that's due
to the URL change or something other change between now and then.
Closes#943.
## Summary
This makes the separation clearer between the legacy `pip` API and the
API we'll add in the future for the package manager itself. It also
enables seamless `puffin pip` aliasing for those that want it.
Closes#918.
## Summary
This PR restructures the flat index fetching in a few ways:
1. It now lives in its own `FlatIndexClient`, since it felt a bit
awkward (in my opinion) for it to live in `RegistryClient`.
2. We now fetch the `FlatIndex` outside of the resolver. This has a few
benefits: (1) the resolver construct is no longer `async` and no longer
returns `Result`, which feels better for a resolver; and (2) we can
share the `FlatIndex` across resolutions rather than re-fetching it for
every source distribution build.
Add directory `--find-links` support for local paths to pip-compile.
It seems that pip joins all sources and then picks the best package. We
explicitly give find links packages precedence if the same exists on an
index and locally by prefilling the `VersionMap`, otherwise they are
added as another index and the existing rules of precedence apply.
Internally, the feature is called _flat index_, which is more meaningful
than _find links_: We're not looking for links, we're picking up local
directories, and (TBD) support another index format that's just a flat
list of files instead of a nested index.
`RegistryBuiltDist` and `RegistrySourceDist` now use `WheelFilename` and
`SourceDistFilename` respectively. The `File` inside `RegistryBuiltDist`
and `RegistrySourceDist` gained the ability to represent both a url and
a path so that `--find-links` with a url and with a path works the same,
both being locked as `<package_name>@<version>` instead of
`<package_name> @ <url>`. (This is more of a detail, this PR in general
still work if we strip that and have directory find links represented as
`<package_name> @ file:///path/to/file.ext`)
`PrioritizedDistribution` and `FlatIndex` have been moved to locations
where we can use them in the upstack PR.
I added a `scripts/wheels` directory with stripped down wheels to use
for testing.
We're lacking tests for correct tag priority precedence with flat
indexes, i only confirmed this manually since it is not covered in the
pip-compile or pip-sync output.
Closes#876
There is no guarantee that indexes provide hashes at all or the sha256
we support specifically. [PEP
503](https://peps.python.org/pep-0503/#specification):
> The URL SHOULD include a hash in the form of a URL fragment with the
following syntax: #<hashname>=<hashvalue>, where <hashname> is the
lowercase name of the hash function (such as sha256) and <hashvalue> is
the hex encoded digest.
We instead use the url as input to generate a hash when caching.
Previously, the url on file could either be a relative or an absolute
url, depending on the index, and we would finalize it lazily. Now we
finalize the url when converting `pypi_types::File` to
`distribution_types::File`. This change is required to make the hashes
on `File` optional (https://github.com/astral-sh/puffin/pull/910), which
are currently the only unique field usable for caching.
Changes `File::size` from a `usize` to a `u64`.
The motivations are that with tensorflow wheels being 475 MB
(https://pypi.org/project/tensorflow/2.15.0.post1/#files), we're already
only one order of magnitude away and to avoid target dependent failures.
Instead of trying to fixup _all_ the invalid version specifiers on pypi
and elsewhere, this filters out distributions with invalid
`requires-python` version specifiers that even
`LenientVersionSpecifiers` couldn't parse, as opposed to failing
entirely, which we currently do.
I would be nicer to model through an invalid distribution pubgrub type,
together with e.g. source dists with an unknown extension, so that the
version itself still shows up in the error trace.
At the same time, we reduce the log level for fixups from warning to
trace, as they are not actionable for the user.
The `async fn` and return-position `impl Trait` in traits improve
`BuildContext` ergonomics. The traits use `impl Future` over `async fn`
to make the send bound explicit
(https://blog.rust-lang.org/2023/12/21/async-fn-rpit-in-traits.html).
The remaining changes are due to clippy.
This PR combines three small changes to finish up the install-many
testing.
* Download pypi_10k_most_dependents.txt in script I'd like to have the
setup process of the large scale checks automated.
* Some install-many dev script improvements
* Fix mkl_fft-1.3.6-58-cp310-cp310-manylinux2014_x86_64.whl:
mkl_fft-1.3.6-58-cp310-cp310-manylinux2014_x86_64.whl has multiple
Wheel-Version entries, we have to ignore that like pip
Apart from the mkl-fft fix the only other errors i've seen showing up
are
https://github.com/astral-sh/puffin/issues/520#issuecomment-1869625642.
## Summary
This PR adds support for relative URLs in the simple JSON responses. We
already support relative URLs for HTML responses, but the handling has
been consolidated between the two. Similar to index URLs, we now store
the base alongside the metadata, and use the base when resolving the
URL.
Closes#455.
## Test Plan
`cargo test` (to test HTML indexes). Separately, I also ran `cargo run
-p puffin-cli -- pip-compile requirements.in -n
--index-url=http://localhost:3141/packages/pypi/+simple` on the
`zb/relative` branch with `packse` running, and forced both HTML and
JSON by limiting the `accept` header.
## Summary
This PR makes the `pypi_types::File` a response-only type (i.e., a type
that's only used when deserializing over the wire), and adds a separate
internal `File` type. Right now, the representations are similar, but
already, we can avoid the "lenient" deserialization on our internal
`File` type, and avoid the special-casing of the property names that's
required in the JSON. Over time, we can evolve this representation
entirely separately from the representation we receive from PyPI and
other indexes.
This crate started off as generic caching utilities, but we started
adding a lot of Puffin-specific stuff (like the cache buckets
abstraction that knows about Git vs. direct URL vs. indexes and so on).
This PR moves the generic stuff into a new `cache-key` crate.
This is a pure refactor to follow-up #690, to separate the metadata that
we know upfront about distributions (like the version, for
registry-based distributions) vs. the metadata that requires building
(like the version, for URL-based distributions).
We now show the fully-resolved URL, rather than the URL as given by the
user, _everywhere_ except for the output resolution file (which should
retain relative paths, unexpanded environment variables, etc.).
Closes https://github.com/astral-sh/puffin/issues/687.
Separate branch for rebasing #677 onto main because i don't trust the
rebase enough to force push.
Closes#677.
---
If you install `black` from PyPI, then `-e ../black`, we need to
uninstall the existing `black`. This sounds simple, but that in turn
requires that we _know_ `-e ../black` maps to the package `black`, so
that we can mark it for uninstallation in the install plan. This, in
turn, means that we need to build editable dependencies prior to the
install plan.
This is just a bunch of reorganization to fix that specific bug
(installing multiple versions of `black` if you run through the above
workflow): we now run through the list of editables upfront, mark those
that are already installed, build those that aren't, and then ensure
that `InstallPlan` correctly removes those that need to be removed, etc.
Closes#676.
Co-authored-by: Charlie Marsh <charlie.r.marsh@gmail.com>
Per the title: adds support for `-e` installs to `puffin pip-install`.
There were some challenges here around threading the editable installs
to the right places. Namely, we want to build _once_, then reuse the
editable installs from the resolution. At present, we were losing the
`editable: true` flag on the `Dist` that came back through the
resolution, so it required some changes to the resolver.
Closes https://github.com/astral-sh/puffin/issues/672.
This PR modifies `SitePackages` to store all distributions in a flat
vector, and maintain two indexes (hash maps) from "per-element data for
an element in the vector" to "index of that element". This enables us to
maintain a map on both package name and editable URL.
## Summary
This PR ensures that we re-use the resolution to install the build
dependencies when building a source distribution. Currently, we only
pass along the list of requirements, and then use the `Finder` to map
each requirement to a distribution. But we already determine the correct
distribution when resolving!
Closes https://github.com/astral-sh/puffin/issues/655.
## Summary
This PR adds a `VerbatimUrl` struct to preserve verbatim URLs throughout
the resolution and installation pipeline. In short, alongside the parsed
`Url`, we also keep the URL as written by the user. This enables us to
display the URL exactly as written by the user, rather than the
serialized path that we use internally.
This will be especially useful once we start expanding environment
variables since, at that point, we'll be able to write the version of
the URL that includes the _unexpected_ environment variable to the
output file.
konsti
Charlie Marsh
Andrew Gallant