Add directory `--find-links` support for local paths to pip-compile.
It seems that pip joins all sources and then picks the best package. We
explicitly give find links packages precedence if the same exists on an
index and locally by prefilling the `VersionMap`, otherwise they are
added as another index and the existing rules of precedence apply.
Internally, the feature is called _flat index_, which is more meaningful
than _find links_: We're not looking for links, we're picking up local
directories, and (TBD) support another index format that's just a flat
list of files instead of a nested index.
`RegistryBuiltDist` and `RegistrySourceDist` now use `WheelFilename` and
`SourceDistFilename` respectively. The `File` inside `RegistryBuiltDist`
and `RegistrySourceDist` gained the ability to represent both a url and
a path so that `--find-links` with a url and with a path works the same,
both being locked as `<package_name>@<version>` instead of
`<package_name> @ <url>`. (This is more of a detail, this PR in general
still work if we strip that and have directory find links represented as
`<package_name> @ file:///path/to/file.ext`)
`PrioritizedDistribution` and `FlatIndex` have been moved to locations
where we can use them in the upstack PR.
I added a `scripts/wheels` directory with stripped down wheels to use
for testing.
We're lacking tests for correct tag priority precedence with flat
indexes, i only confirmed this manually since it is not covered in the
pip-compile or pip-sync output.
Closes#876
This crate started off as generic caching utilities, but we started
adding a lot of Puffin-specific stuff (like the cache buckets
abstraction that knows about Git vs. direct URL vs. indexes and so on).
This PR moves the generic stuff into a new `cache-key` crate.
I don't have a good testing strategy here (I'm manually testing against
`devpi` via `packse`), but the HTML index uses (e.g.)
`data-requires-python=">=3.8"`, so we need to decode.
This gives a 1.23 speedup on transformers-extras. We could change to
msgpack for the entire cache if we want. I only tried this format and
postcard so far, where postcard was much slower (like 1.6s).
I don't actually want to merge it like this, i wanted to figure out the
ballpark of improvement for switching away from json.
```
hyperfine --warmup 3 --runs 10 "target/profiling/puffin pip-compile --cache-dir cache-msgpack scripts/requirements/transformers-extras.in" "target/profiling/branch pip-compile scripts/requirements/transformers-extras.in"
Benchmark 1: target/profiling/puffin pip-compile --cache-dir cache-msgpack scripts/requirements/transformers-extras.in
Time (mean ± σ): 179.1 ms ± 4.8 ms [User: 157.5 ms, System: 48.1 ms]
Range (min … max): 174.9 ms … 188.1 ms 10 runs
Benchmark 2: target/profiling/branch pip-compile scripts/requirements/transformers-extras.in
Time (mean ± σ): 221.1 ms ± 6.7 ms [User: 208.1 ms, System: 46.5 ms]
Range (min … max): 213.5 ms … 235.5 ms 10 runs
Summary
target/profiling/puffin pip-compile --cache-dir cache-msgpack scripts/requirements/transformers-extras.in ran
1.23 ± 0.05 times faster than target/profiling/branch pip-compile scripts/requirements/transformers-extras.in
```
Disadvantage: We can't manually look into the cache anymore to debug
things
- [ ] Check more formats, i currently only tested json, msgpack and
postcard, there should be other formats, too
- [x] Switch over `CachedByTimestamp` serialization (for the interpreter
caching)
- [x] Switch over error handling and make sure puffin is still resilient
to cache failure
## Summary
This PR adds a `VerbatimUrl` struct to preserve verbatim URLs throughout
the resolution and installation pipeline. In short, alongside the parsed
`Url`, we also keep the URL as written by the user. This enables us to
display the URL exactly as written by the user, rather than the
serialized path that we use internally.
This will be especially useful once we start expanding environment
variables since, at that point, we'll be able to write the version of
the URL that includes the _unexpected_ environment variable to the
output file.
Extends #517 with a suggestion from @konstin to parse the `SimpleJson`
into an intermediate type `SimpleMetadata(BTreeMap<Version,
VersionFiles>)` before converting to a `VersionMap`. This reduces the
number of times we need to parse the response. Additionally, we cache
the parsed response now instead of `SimpleJson`.
`VersionFiles` stores two vectors with
`WheelFilename`/`SourceDistFilename` and `File` tuples. These can be
iterated over together or separately. A new enum `DistFilename` was
added to capture the `SourceDistFilename` and `WheelFilename` variants
allowing iteration over both vectors.
This PR modifies the source distribution building to replace any
existing targets after building the new wheel. In some cases, the
existence of an existing target may be indicative of a bug, so we warn.
It's partially a workaround for some (but not all) of the errors in
https://github.com/astral-sh/puffin/issues/554.
Replaces the usage of `http-cache-reqwest` for simple index queries with
our custom cached client, removing `http-cache-reqwest` altogether.
The new cache paths are `<cache>/simple-v0/<index>/<package_name>.json`.
I could not test with a non-pypi index since i'm not aware of any other
json indices (jax and torch are both html indices).
In a future step, we can transform the response to be a
`HashMap<Version, {source_dists: Vec<(SourceDistFilename, File)>,
wheels: Vec<(WheeFilename, File)>}` (independent of python version, this
cache is used by all environments together). This should speed up cache
deserialization a bit, since we don't need to try source dist and wheel
anymore and drop incompatible dists, and it should make building the
`VersionMap` simpler. We can speed this up even further by splitting
into a version lists and the info for each version. I'm mentioning this
because deserialization was a major bottleneck in the rust part of the
old python prototype.
Fixes#481
## Summary and motivation
For a given source dist, we store the metadata of each wheel built
through it in `built-wheel-metadata-v0/pypi/<source dist
filename>/metadata.json`. During resolution, we check the cache status
of the source dist. If it is fresh, we check `metadata.json` for a
matching wheel. If there is one we use that metadata, if there isn't, we
build one. If the source is stale, we build a wheel and override
`metadata.json` with that single wheel. This PR thereby ties the local
built wheel metadata cache to the freshness of the remote source dist.
This functionality is available through `SourceDistCachedBuilder`.
`puffin_installer::Builder`, `puffin_installer::Downloader` and
`Fetcher` are removed, instead there are now `FetchAndBuild` which calls
into the also new `SourceDistCachedBuilder`. `FetchAndBuild` is the new
main high-level abstraction: It spawns parallel fetching/building, for
wheel metadata it calls into the registry client, for wheel files it
fetches them, for source dists it calls `SourceDistCachedBuilder`. It
handles locks around builds, and newly added also inter-process file
locking for git operations.
Fetching and building source distributions now happens in parallel in
`pip-sync`, i.e. we don't have to wait for the largest wheel to be
downloaded to start building source distributions.
In a follow-up PR, I'll also clear built wheels when they've become
stale.
Another effect is that in a fully cached resolution, we need neither zip
reading nor email parsing.
Closes#473
## Source dist cache structure
Entries by supported sources:
* `<build wheel metadata cache>/pypi/foo-1.0.0.zip/metadata.json`
* `<build wheel metadata
cache>/<sha256(index-url)>/foo-1.0.0.zip/metadata.json`
* `<build wheel metadata
cache>/url/<sha256(url)>/foo-1.0.0.zip/metadata.json`
But the url filename does not need to be a valid source dist filename
(<https://github.com/search?q=path%3A**%2Frequirements.txt+master.zip&type=code>),
so it could also be the following and we have to take any string as
filename:
* `<build wheel metadata
cache>/url/<sha256(url)>/master.zip/metadata.json`
Example:
```text
# git source dist
pydantic-extra-types @ git+https://github.com/pydantic/pydantic-extra-types.git
# pypi source dist
django_allauth==0.51.0
# url source dist
werkzeug @ ff1904eb5e2853bf83db817a7dd53d/werkzeug-3.0.1.tar.gz
```
will be stored as
```text
built-wheel-metadata-v0
├── git
│ └── 5c56bc1c58c34c11
│ └── 843b753e9e8cb74e83cac55598719b39a4d5ef1f
│ └── metadata.json
├── pypi
│ └── django-allauth-0.51.0.tar.gz
│ └── metadata.json
└── url
└── 6781bd6440ae72c2
└── werkzeug-3.0.1.tar.gz
└── metadata.json
```
The inside of a `metadata.json`:
```json
{
"data": {
"django_allauth-0.51.0-py3-none-any.whl": {
"metadata-version": "2.1",
"name": "django-allauth",
"version": "0.51.0",
...
}
}
}
```
A consistent cache structure for remote wheel metadata:
* `<wheel metadata cache>/pypi/foo-1.0.0-py3-none-any.json`
* `<wheel metadata
cache>/<digest(index-url)>/foo-1.0.0-py3-none-any.json`
* `<wheel metadata cache>/url/<digest(url)>/foo-1.0.0-py3-none-any.json`
The source dist caching will use a similar structure (#468).
I intend this to become the main form of caching for puffin: You can
make http requests, you tranform the data to what you really need, you
have control over the cache key, and the cache is always json (or
anything else much faster we want to replace it with as long as it's
serde!)
The normalized name abstractions were not consistently, this PR uses
them where they were previously missing:
* `WheelFilename::distribution`
* `Requirement::name`
* `Requirement::extras`
* `Metadata21::name`
* `Metadata21::provides_dist`
With `puffin-package` depending on `pep508_rs` this would be cyclical
crate dependency, so `puffin-normalize` gets split out from
`puffin-package`.
`DistInfoName` has the same task and semantics as `PackageName`, so it's
merged into the latter.
`PackageName` and `ExtraName` documentation is moved onto the type and
their constructors are called `new` instead of `normalize`. We now use
these constructors rarely enough the implicit allocation by
`to_string()` shouldn't matter anymore, while more actual cloning
becomes visible.
This is isn't ready, but it can resolve
`meine_stadt_transparent==0.2.14`.
The source distributions are currently being built serially one after
the other, i don't know if that is incidentally due to the resolution
order, because sdist building is blocking or because of something in the
resolver that could be improved.
It's a bit annoying that the thing that was supposed to do http requests
now suddenly also has to a whole download/unpack/resolve/install/build
routine, it messes up the type hierarchy. The much bigger problem though
is avoid recursive crate dependencies, it's the reason for the callback
and for splitting the builder into two crates (badly named atm)
Charlie Marsh
konsti
Zanie Blue