Per https://apenwarr.ca/log/20181113, `ctime` should be a lot more
conservative, and should detect things like the issue we see with the
python-build-standalone builds, where the `mtime` is identical across
builds.
On Windows, I'm just using `last_write_time`. But we should probably add
`volume_serial_number` and other attributes via
[`winapi_util`](https://docs.rs/winapi-util/latest/winapi_util/index.html).
## Summary
This is a refactor of the source distribution cache that again aims to
make the cache purely additive. Instead of deleting all built wheels
when the cache gets invalidated (e.g., because the source distribution
changed on PyPI or something), we now treat each invalidation as its own
cache directory. The manifest inside of the source distribution
directory now becomes a pointer to the "latest" version of the source
distribution cache.
Here's a visual example:
With this change, we avoid deleting built distributions that might be
relied on elsewhere and maintain our invariant that the cache is purely
additive. The cost is that we now preserve stale wheels, but we should
add a garbage collection mechanism to deal with that.
## Summary
This PR gets rid of the manifest that we store for source distributions.
Historically, that manifest included the source distribution metadata,
plus a list of built wheels.
The problem with the manifest is that it duplicates state, since we now
have to look at both the manifest and the filesystem to understand the
cache state. Instead, I think we should treat the cache as the source of
truth, and get rid of the duplicated state in the manifest.
Now, we store the manifest (which is merely used to check for cache
freshness -- in future PRs, I will repurpose it though, so I left it
around), then the distribution metadata as its own file, then any
distributions in the same directory. When we want to see if there are
any valid distributions, we `readdir` on the directory. This is also
much more consistent with how the install plan works.
Follow-up to #996 with retries of the full `pip_install_scenario` module
since there are a few tests that flake and tracking down the
non-determinism is proving to be quite complicated.
Adds a profile that can be used to disable retries, e.g. `--profile
no-retry` when you expect the scenario to change.
As before, hopefully this is a short-term measure.
Mirroring `virtualenv -p` and driven by the lack of `pythonx.y` in
`PATH` on windows, this PR adds `-p x.y` support to `puffin venv` (first
commit).
Supported formats:
* NEW: `-p 3.10` searches for an installed Python 3.10 (Looking for
`python3.10` on linux/mac).
Specifying a patch version is not supported
* `-p python3.10` or `-p python.exe` looks for a binary in `PATH`
* `-p /home/ferris/.local/bin/python3.10` uses this exact Python
In the second commit, we add python interpreter search on windows using
`py --list-paths`. On windows, all python are called `python.exe` so the
unix trick of looking for `python{}.{}` in `PATH` doesn't work. Instead,
we ask the python launcher for windows to tell us about all installed
packages. We should eventually migrate this to [PEP
514](https://peps.python.org/pep-0514/) by reading the registry entries
ourselves.
Extends #1048 interface providing a more general interface that I think
should be standard.
Allows forcing colors to be on _or_ off. e.g. `NO_COLOR=1 pip install
pip-tools --color always` would be colored.
Hides the `--no-color` option as it only exists for compatibility (and
seems better than throwing an error when people assume it will exist).
Has a nice side-effect of documenting our coloring behaviors e.g.
```
--color <COLOR>
Control colors in output
[default: auto]
Possible values:
- auto: Enables colored output only when the output is going to a terminal or TTY with support
- always: Enables colored output regardless of the detected environment
- never: Disables colored output
```
If the executable is a symbolic link, checking the modified time will
not reflect changes to the source file e.g.
```
❯ touch foo
❯ ln -s foo foobar
❯ gstat -c %Y foo
1705958431
❯ gstat -c %Y foobar
1705958438
❯ touch foo
❯ gstat -c %Y foobar
1705958438
```
This can result in a stale cache being treated as fresh; for example,
when Rye changes the interpreter linked in a virtual environment.
In https://github.com/astral-sh/puffin/pull/986 there was some confusion
about what these values are set to and I noticed that we never actually
display the target version being used for a resolution.
- Consistently display the Python interpreter being used, i.e. make it
clear that we are referring the the interpreter/installed Python version
and always show the version number
- Display the target Python version during solving
## Summary
This PR adds support for PyPy wheels by changing the compatible tags
based on the implementation name and version of the current interpreter.
For now, we only support CPython and PyPy, and explicitly error out when
given other interpreters. (Is this right? Should we just fallback to
CPython tags...? Or skip the ABI-specific tags for unknown
interpreters?)
The logic is based on
4d85340613/src/packaging/tags.py (L247).
Note, however, that `packaging` uses the `EXT_SUFFIX` variable from
`sysconfig`... Instead, I looked at the way that PyPy formats the tags,
and recreated them based on the Python and implementation version. For
example, PyPy wheels look like
`cchardet-2.1.7-pp37-pypy37_pp73-win_amd64.whl` -- so that's `pp37` for
PyPy with Python version 3.7, and then `pypy37_pp73` for PyPy with
Python version 3.7 and PyPy version 7.3.
Closes https://github.com/astral-sh/puffin/issues/1013.
## Test Plan
I tested this manually, but I couldn't find macOS universal PyPy
wheels... So instead I added `cchardet` to a `requirements.in`, ran
`cargo run pip sync requirements.in --index-url
https://pypy.kmtea.eu/simple --verbose`, and added logging to verify
that the platform tags matched (even if the architecture didn't).
This PR attempts to fix a common footgun in `requirements.txt` files.
Previously, to provide a file, you had to use `package_name @
file:///Users/crmarsh/...` -- in other words, an absolute path.
Now, these requirements follow the exact same rules as editables, so you
can do:
```
package_name @ ./file.zip
```
And similar.
The way the parsing is setup, this is intentionally _not_ supported when
reading metadata -- only when parsing `requirements.txt` directly.
Closes#984.
## Summary
`interpreter.version()` returns the `python_full_version`, but the
marker variant uses `python_version` instead of `python_full_version` --
so it's omitting the patch.
## Summary
Based on user feedback. Calling it a "parse error" is misleading, since
this is really something we don't support, but that users can work
around.
e.g. for scenarios that test resolution _without_ installation.
This refactors the `update` script to generate scenario test files for
`pip compile` _and_ `pip install`. We don't overlap scenarios to save
time. We only generate `pip compile` test cases for scenarios we cannot
represent with `pip install` e.g. a `--python-version` override.
The _one_ scenario I added happened to reveal a bug in our resolver
where we were incorrectly filtering versions by the installed version
when wheels were available. Per the comment at
https://github.com/astral-sh/puffin/issues/883#issuecomment-1890773112,
we should _only_ need to check for a compatible installed Python version
when using a different _target_ Python version if we need to build a
source distribution.
53bce68400
resolves this by removing the excessive constraints — the correct Python
version incompatibilities are applied elsewhere.
Adds support for disabling installation from pre-built wheels i.e. the
package must be built from source locally.
We will still always use pre-built wheels for metadata during
resolution.
Available via `--no-binary` and `--no-binary-package <name>` flags in
`pip install` and `pip sync`. There is no flag for `pip compile` since
no installation happens there.
```
--no-binary
Don't install pre-built wheels.
When enabled, all installed packages will be installed from a source distribution.
The resolver will still use pre-built wheels for metadata.
--no-binary-package <NO_BINARY_PACKAGE>
Don't install pre-built wheels for a specific package.
When enabled, the specified packages will be installed from a source distribution.
The resolver will still use pre-built wheels for metadata.
```
When packages are already installed, the `--no-binary` flag will have no
affect without the `--reinstall` flag. In the future, I'd like to change
this by tracking if a local distribution is from a pre-built wheel or a
locally-built wheel. However, this is significantly more complex and
different than `pip`'s behavior so deferring for now.
For reference, `pip`'s flag works as follows:
```
--no-binary <format_control>
Do not use binary packages. Can be supplied multiple times, and each time adds to the
existing value. Accepts either ":all:" to disable all binary packages, ":none:" to empty the
set (notice the colons), or one or more package names with commas between them (no colons).
Note that some packages are tricky to compile and may fail to install when this option is
used on them.
```
Note we are not matching the exact `pip` interface here because it seems
complicated to use. I think we may want to consider adjusting our
interface for this behavior since we're not entirely compatible anyway
e.g. I think `--force-build` and `--force-build-package` are clearer
names. We could also consider matching the `pip` interface or only
allowing `--no-binary <package>` for compatibility. We can of course do
whatever we want in our _own_ install interfaces later.
Additionally, we may want to further consider the semantics of
`--no-binary`. For example, if I run `pip install pydantic --no-binary`
I expect _just_ Pydantic to be installed without binaries but by default
we will build all of Pydantic's dependencies too.
This work was prompted by #895, as it is much easier to measure
performance gains from building source distributions if we have a flag
to ensure we actually build source distributions. Additionally, this is
a flag I have used frequently in production to debug packages that ship
Cythonized wheels.
Improves some of the "no versions of <package> are available" messages
by showing the complement or inversion of the package.
Does not address cases like
```
Because there are no versions of crow that satisfy any of:
crow>1.0.0,<2.0.0a5
crow>2.0.0a7,<2.0.0b1
crow>2.0.0b1,<2.0.0b5
...
```
which are a bit more complicated; I'll focus on those cases in a
follow-up.
## Summary
I don't know if this is actually a good change, but it tries to make the
editable install experience more consistent. Specifically, we now
support...
```
# Use a relative path with a `file://` prefix.
# Prior to this PR, we supported `file:../foo`, but not `file://../foo`, which felt inconsistent.
-e file://../foo
# Use environment variables with paths, not just URLs.
# Prior to this PR, we supported `file://${PROJECT_ROOT}/../foo`, but not the below.
-e ${PROJECT_ROOT}/../foo
```
Importantly, `-e file://../foo` is actually not supported by pip... `-e
file:../foo` _is_ supported though. We support both, as of this PR. Open
to feedback.
On top of https://github.com/astral-sh/puffin/pull/947, we can also box
`PrioritizedDistribution`.
In a simple benchmark, this seems to slightly improve performance when
comparing only this commit to main, even though the benchmark is too
noisy to establish significance:
```
$ hyperfine --warmup 30 --runs 300 "target/profiling/main-dev resolve meine_stadt_transparent" "target/profiling/puffin-dev resolve meine_stadt_transparent"
Benchmark 1: target/profiling/main-dev resolve meine_stadt_transparent
Time (mean ± σ): 83.6 ms ± 2.0 ms [User: 77.7 ms, System: 20.0 ms]
Range (min … max): 81.4 ms … 98.2 ms 300 runs
Warning: Statistical outliers were detected. Consider re-running this benchmark on a quiet system without any interferences from other programs. It might help to use the '--warmup' or '--prepare' options.
Benchmark 2: target/profiling/puffin-dev resolve meine_stadt_transparent
Time (mean ± σ): 80.8 ms ± 2.2 ms [User: 75.4 ms, System: 19.5 ms]
Range (min … max): 78.6 ms … 98.6 ms 300 runs
Warning: Statistical outliers were detected. Consider re-running this benchmark on a quiet system without any interferences from other programs. It might help to use the '--warmup' or '--prepare' options.
Summary
target/profiling/puffin-dev resolve meine_stadt_transparent ran
1.03 ± 0.04 times faster than target/profiling/main-dev resolve meine_stadt_transparent
```
The effect on type sizes however is considerable ([downstack
PR](https://gist.github.com/konstin/38e6c774db541db46d61f1d4ea6b498f)
vs. [this
PR](https://gist.github.com/konstin/003a77fe7d7d246b0d535e3fc843cb36)):
```patch
--- branch.txt 2024-01-17 14:26:01.826085176 +0100
+++ boxed-prioritized-dist.txt 2024-01-17 14:25:57.101900963 +0100
@@ -1,19 +1,3 @@
-9264 alloc::collections::btree::node::InternalNode<pep440_rs::version::Version, distribution_types::PrioritizedDistribution> align=8
- 9168 data
- 96 edges
-
-9264 alloc::collections::btree::node::InternalNode<pep440_rs::Version, distribution_types::PrioritizedDistribution> align=8
- 9168 data
- 96 edges
-
-9168 alloc::collections::btree::node::LeafNode<pep440_rs::version::Version, distribution_types::PrioritizedDistribution> align=8
- 9064 vals
- 88 keys
-
-9168 alloc::collections::btree::node::LeafNode<pep440_rs::Version, distribution_types::PrioritizedDistribution> align=8
- 9064 vals
- 88 keys
-
8992 tokio::sync::mpsc::block::Block<hyper::client::dispatch::Envelope<http::request::Request<reqwest::async_impl::body::ImplStream>, http::response::Response<hyper::body::body::Body>>> align=8
8960 values
32 header
@@ -74,10 +58,23 @@
40 __tracing_attr_span
64 variant Unresumed, Returned, Panicked
+5648 {async fn body@crates/puffin-client/src/registry_client.rs:224:5: 224:30} align=8
+ 5647 variant Suspend0
+ 5576 __awaitee align=8
+ 40 __tracing_attr_span
```
This is https://github.com/astral-sh/puffin/pull/947 again but this time
merging into main instead of downstack, sorry for the noise.
---
Windows has a default stack size of 1MB, which makes puffin often fail
with stack overflows. The PR reduces stack size by three changes:
* Boxing `File` in `Dist`, reducing the size from 496 to 240.
* Boxing the largest futures.
* Boxing `CachePolicy`
## Method
Debugging happened on linux using
https://github.com/astral-sh/puffin/pull/941 to limit the stack size to
1MB. Used ran the command below.
```
RUSTFLAGS=-Zprint-type-sizes cargo +nightly build -p puffin-cli -j 1 > type-sizes.txt && top-type-sizes -w -s -h 10 < type-sizes.txt > sizes.txt
```
The main drawback is top-type-sizes not saying what the `__awaitee` is,
so it requires manually looking up with a future with matching size.
When the `brotli` features on `reqwest` is active, a lot of brotli types
show up. Toggling this feature however seems to have no effect. I assume
they are false positives since the `brotli` crate has elaborate control
about allocation. The sizes are therefore shown with the feature off.
## Results
The largest future goes from 12208B to 6416B, the largest type
(`PrioritizedDistribution`, see also #948) from 17448B to 9264B. Full
diff: https://gist.github.com/konstin/62635c0d12110a616a1b2bfcde21304f
For the second commit, i iteratively boxed the largest file until the
tests passed, then with an 800KB stack limit looked through the
backtrace of a failing test and added some more boxing.
Quick benchmarking showed no difference:
```console
$ hyperfine --warmup 2 "target/profiling/main-dev resolve meine_stadt_transparent" "target/profiling/puffin-dev resolve meine_stadt_transparent"
Benchmark 1: target/profiling/main-dev resolve meine_stadt_transparent
Time (mean ± σ): 49.2 ms ± 3.0 ms [User: 39.8 ms, System: 24.0 ms]
Range (min … max): 46.6 ms … 63.0 ms 55 runs
Warning: Statistical outliers were detected. Consider re-running this benchmark on a quiet system without any interferences from other programs. It might help to use the '--warmup' or '--prepare' options.
Benchmark 2: target/profiling/puffin-dev resolve meine_stadt_transparent
Time (mean ± σ): 47.4 ms ± 3.2 ms [User: 41.3 ms, System: 20.6 ms]
Range (min … max): 44.6 ms … 60.5 ms 62 runs
Warning: Statistical outliers were detected. Consider re-running this benchmark on a quiet system without any interferences from other programs. It might help to use the '--warmup' or '--prepare' options.
Summary
target/profiling/puffin-dev resolve meine_stadt_transparent ran
1.04 ± 0.09 times faster than target/profiling/main-dev resolve meine_stadt_transparent
```
By default, windows has a stack size limit of 1MB which we run against
in debug without any explicit culprit. A new environment variable
`PUFFIN_STACK_SIZE` allows setting an artificially smaller stack size.
We should definitely sort this out per #863 but until then I want to
stop getting false reports of failed CI please and this seems better
than turning off the test entirely.
Alternatively #993
Charlie Marsh
Zanie Blue
konsti