Build failures are one of the most common user facing failures that
aren't "obivous" errors (such as typos) or resolver errors. Currently,
they show more technical details than being focussed on this being an
error in a subprocess that is either on the side of the package or -
more likely - in the build environment, e.g. the user needs to install a
dev package or their python version is incompatible.
The new error message clearly delineates the part that's important (this
is a build backend problem) from the internals (we called this hook) and
is consistent about which part of the dist building stage failed. We
have to calibrate the exact wording of the error message some more. Most
of the implementation is working around the orphan rule, (this)error
rules and trait rules, so it came out more of a refactoring than
intended.
Example:
<!--
Thank you for contributing to uv! To help us out with reviewing, please
consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title?
- Does this pull request include references to any relevant issues?
-->
## Summary
The `fork-strategy` default value was overlooked in #9887.
---------
Co-authored-by: Charlie Marsh <charlie.r.marsh@gmail.com>
Background reading: https://github.com/astral-sh/uv/issues/8157
Companion PR: https://github.com/astral-sh/pubgrub/pull/36
Requires for test coverage: https://github.com/astral-sh/packse/pull/230
When two packages A and B conflict, we have the option to choose a lower
version of A, or a lower version of B. Currently, we determine this by
the order we saw a package (assuming equal specificity of the
requirement): If we saw A before B, we pin A until all versions of B are
exhausted. This can lead to undesirable outcomes, from cases where it's
just slow (sentry) to others cases without lower bounds where be
backtrack to a very old version of B. This old version may fail to build
(terminating the resolution), or it's a version so old that it doesn't
depend on A (or the shared conflicting package) anymore - but also is
too old for the user's application (fastapi). #8157 collects such cases,
and the `wrong-backtracking` packse scenario contains a minimized
example.
We try to solve this by tracking which packages are "A"s, culprits, and
"B"s, affected, and manually interfering with project selection and
backtracking. Whenever a version we just chose is rejected, we give the
current package a counter for being affected, and the package it
conflicted with a counter for being a culprit. If a package accumulates
more counts than a threshold, we reprioritize: Undecided after the
culprits, after the affected, after packages that only have a single
version (URLs, `==<version>`). We then ask pubgrub to backtrack just
before the culprit. Due to the changed priorities, we now select package
B, the affected, instead of package A, the culprit.
To do this efficiently, we ask pubgrub for the incompatibility that
caused backtracking, or just the last version to be discarded (due to
its dependencies). For backtracking, we use the last incompatibility
from unit propagation as a heuristic. When a version is discarded
because one of its dependencies conflicts with the partial solution, the
incompatibility tells us the package in the partial solution that
conflicted.
We only backtrack once per package, on the first time it passes the
threshold. This prevents backtracking loops in which we make the same
decisions over and over again. But we also changed the priority, so that
we shouldn't take the same path even after the one time we backtrack (it
would defeat the purpose of this change).
There are some parameters that can be tweaked: Currently, the threshold
is set to 5, which feels not too eager with so me of the conflicts that
we want to tolerate but also changes strategies quickly. The relative
order of the new priorities can also be changed, as for each (A, B) pair
the priority of B is afterwards lower than that for A. Currently,
culprits capture conflict for the whole package, but we could limit that
to a specific version. We could discard conflict counters after
backtracking instead of keeping them eternally as we do now. Note that
we're always taking about pairs (A, B), but in practice we track
individual packages, not pairs.
A case that we wouldn't capture is when B is only introduced to the
dependency graph after A, but I think that would require cyclical
dependency for A and B to conflict? There may also be cases where
looking at the last incompatibility is insufficient.
Another example that we can't repair with prioritization is
urllib3/boto3/botocore: We actually have to check all the newer versions
of boto3 and botocore to identify the version that allows with the older
urllib3, no shortcuts allowed.
```
urllib3<1.25.4
boto3
```
All examples I tested were cases with two packages where we only had to
switch the order, so I've abstracted them into a single packse case.
This PR changes the resolution for certain paths, and there is the risk
for regressions.
Fixes#8157
---
All tested examples improved.
Input fastapi:
```text
starlette<=0.36.0
fastapi<=0.115.2
```
```
# BEFORE
$ uv pip --no-progress compile -p 3.11 --exclude-newer 2024-10-01 --no-annotate debug/fastapi.txt
annotated-types==0.7.0
anyio==4.6.0
fastapi==0.1.17
idna==3.10
pydantic==2.9.2
pydantic-core==2.23.4
sniffio==1.3.1
starlette==0.36.0
typing-extensions==4.12.2
# AFTER
$ cargo run --profile fast-build --no-default-features pip compile -p 3.11 --no-progress --exclude-newer 2024-10-01 --no-annotate debug/fastapi.txt
annotated-types==0.7.0
anyio==4.6.0
fastapi==0.109.1
idna==3.10
pydantic==2.9.2
pydantic-core==2.23.4
sniffio==1.3.1
starlette==0.35.1
typing-extensions==4.12.2
```
Input xarray:
```text
xarray[accel]
```
```
# BEFORE
$ uv pip --no-progress compile -p 3.11 --exclude-newer 2024-10-01 --no-annotate debug/xarray-accel.txt
bottleneck==1.4.0
flox==0.9.13
llvmlite==0.36.0
numba==0.53.1
numbagg==0.8.2
numpy==2.1.1
numpy-groupies==0.11.2
opt-einsum==3.4.0
packaging==24.1
pandas==2.2.3
python-dateutil==2.9.0.post0
pytz==2024.2
scipy==1.14.1
setuptools==75.1.0
six==1.16.0
toolz==0.12.1
tzdata==2024.2
xarray==2024.9.0
# AFTER
$ cargo run --profile fast-build --no-default-features pip compile -p 3.11 --no-progress --exclude-newer 2024-10-01 --no-annotate debug/xarray-accel.txt
bottleneck==1.4.0
flox==0.9.13
llvmlite==0.43.0
numba==0.60.0
numbagg==0.8.2
numpy==2.0.2
numpy-groupies==0.11.2
opt-einsum==3.4.0
packaging==24.1
pandas==2.2.3
python-dateutil==2.9.0.post0
pytz==2024.2
scipy==1.14.1
six==1.16.0
toolz==0.12.1
tzdata==2024.2
xarray==2024.9.0
```
Input sentry: The resolution is identical, but arrived at much faster:
main tries 69 versions (sentry-kafka-schemas: 63), PR tries 12 versions
(sentry-kafka-schemas: 6; 5 times conflicting, then once the right
version).
```text
python-rapidjson<=1.20,>=1.4
sentry-kafka-schemas<=0.1.113,>=0.1.50
```
```
# BEFORE
$ uv pip --no-progress compile -p 3.11 --exclude-newer 2024-10-01 --no-annotate debug/sentry.txt
fastjsonschema==2.20.0
msgpack==1.1.0
python-rapidjson==1.8
pyyaml==6.0.2
sentry-kafka-schemas==0.1.111
typing-extensions==4.12.2
# AFTER
$ cargo run --profile fast-build --no-default-features pip compile -p 3.11 --no-progress --exclude-newer 2024-10-01 --no-annotate debug/sentry.txt
fastjsonschema==2.20.0
msgpack==1.1.0
python-rapidjson==1.8
pyyaml==6.0.2
sentry-kafka-schemas==0.1.111
typing-extensions==4.12.2
```
Input apache-beam
```text
# Run on Python 3.10
dill<0.3.9,>=0.2.2
apache-beam<=2.49.0
```
```
# BEFORE
$ uv pip --no-progress compile -p 3.10 --exclude-newer 2024-10-01 --no-annotate debug/apache-beam.txt
× Failed to download and build `apache-beam==2.0.0`
╰─▶ Build backend failed to determine requirements with `build_wheel()` (exit status: 1)
# AFTER
$ cargo run --profile fast-build --no-default-features pip compile -p 3.10 --no-progress --exclude-newer 2024-10-01 --no-annotate debug/apache-beam.txt
apache-beam==2.49.0
certifi==2024.8.30
charset-normalizer==3.3.2
cloudpickle==2.2.1
crcmod==1.7
dill==0.3.1.1
dnspython==2.6.1
docopt==0.6.2
fastavro==1.9.7
fasteners==0.19
grpcio==1.66.2
hdfs==2.7.3
httplib2==0.22.0
idna==3.10
numpy==1.24.4
objsize==0.6.1
orjson==3.10.7
proto-plus==1.24.0
protobuf==4.23.4
pyarrow==11.0.0
pydot==1.4.2
pymongo==4.10.0
pyparsing==3.1.4
python-dateutil==2.9.0.post0
pytz==2024.2
regex==2024.9.11
requests==2.32.3
six==1.16.0
typing-extensions==4.12.2
urllib3==2.2.3
zstandard==0.23.0
```
## Summary
This PR makes the behavior in https://github.com/astral-sh/uv/pull/9827
the default: we try to select the latest supported package version for
each supported Python version, but we still optimize for choosing fewer
versions when stratifying by platform.
However, you can opt out with `--fork-strategy fewest`.
Closes https://github.com/astral-sh/uv/issues/7190.
When publishing, we currently ask the user to set `--publish-url` to the
upload URL and `--check-url` to the simple index URL, or the equivalent
configuration keys. But that's redundant with the `[[tool.uv.index]]`
declaration. Instead, we extend `[[tool.uv.index]]` with a `publish-url`
entry and allow passing `uv publish --index <name>`.
`uv publish --index <name>` requires the `pyproject.toml` to be present
when publishing, unlike using `--publish-url ... --check-url ...` which
can be used e.g. in CI without a checkout step. `--index` also always
uses the check URL feature to aid upload consistency.
The documentation tries to explain both approaches together, which
overlap for the check URL feature.
Fixes#8864
---------
Co-authored-by: Zanie Blue <contact@zanie.dev>
Addresses #6805
## Summary
This PR adds a `--gui-script` flag to `uv run` that allows running
Python scripts with `pythonw.exe` on Windows, regardless of file
extension. This solves the issue where users need to maintain duplicate
`.py` and `.pyw` files to run the same script with and without a console
window.
The implementation follows the pattern established by the existing
`--script` flag, but uses `pythonw.exe` instead of `python.exe` on
Windows. On non-Windows platforms, the flag is present but returns an
error indicating it's Windows-only functionality.
Changes:
- Added `--gui-script` flag (Windows-only)
- Added Windows test to verify GUI script behavior
- Added non-Windows test to verify proper error message
- Updated CLI documentation
## Test Plan
The changes are tested through:
1. New Windows-specific test that verifies:
- Script runs successfully with `pythonw.exe` when using `--gui-script`
- Console output is suppressed in GUI mode but visible in regular mode
- Same script can be run both ways without modification
2. New non-Windows test that verifies:
- Appropriate error message when `--gui-script` is used on non-Windows
platforms
3. Documentation updates to clearly indicate Windows-only functionality
---------
Co-authored-by: Zanie Blue <contact@zanie.dev>
## Summary
This PR adds `--install-dir` argument for the following commands:
- `uv python install`
- `uv python uninstall`
The `UV_PYTHON_INSTALL_DIR` env variable can be used to set it
(previously it was also used internally).
Any more commands we would want to add this to?
## Test Plan
For now just manual test (works on my machine hehe)
```
❯ ./target/debug/uv python install --install-dir /tmp/pythons 3.8.12
Searching for Python versions matching: Python 3.8.12
Installed Python 3.8.12 in 4.31s
+ cpython-3.8.12-linux-x86_64-gnu
❯ /tmp/pythons/cpython-3.8.12-linux-x86_64-gnu/bin/python --help
usage: /tmp/pythons/cpython-3.8.12-linux-x86_64-gnu/bin/python [option] ... [-c cmd | -m mod | file | -] [arg] ...
```
Open to add some tests after the initial feedback.
---------
Co-authored-by: Zanie Blue <contact@zanie.dev>
In preparation for a dedicated "Troubleshooting" section, revitalizes
the "Build failures" reference by adding more details, examples, and
structure. This will be used as a model for a "Install failures"
document.
This pull request is best viewed with [whitespace
hidden](https://github.com/astral-sh/uv/pull/8650/files?diff=unified&w=1)
Adds a `--default` flag to `uv python install` in preview. This includes
a `python` and `python{major}` executable in addition to the
`python{major}.{minor}` executable. We will replace uv-managed
executables, but externally managed executables require the `--force`
flag to overwrite.
If you run `uv python install` (without arguments), we include the
`--default` flag implicitly to populate `python` and `python3` for the
"default" install version.
In the future, we should add a warning if the installed executable isn't
at the front of the PATH.
## Summary
Fixes#9027
Minor enhancement on top of #8531 that makes the CLI parameter
`--check-url` also available as the setting `check-url` in configuration
files.
## Test Plan
Updates existing tests to take the new setting into account.
Within publish command testing I didn't see existing tests covering
settings from toml files (instead of from CLI params), so I didn't add
anything of that sort.
Going through PEP 517 to build a package is slow, so when building a
package with the uv build backend, we can call into the uv build backend
directly. This is the basis for the `uv build --list`.
This does not enable the fast path for general source dependencies.
There is a possible difference in execution if the latest uv version is
newer than the one currently running: The PEP 517 path would use the
latest version, while the fast path uses the current version.
Please review commit-by-commit
### Benchmark
`built_with_uv`, using the fast path:
```
$ hyperfine "~/projects/uv/target/profiling/uv build"
Time (mean ± σ): 9.2 ms ± 1.1 ms [User: 4.6 ms, System: 4.6 ms]
Range (min … max): 6.4 ms … 12.7 ms 290 runs
```
`hatcling_editable`, with hatchling being optimized for fast startup
times:
```
$ hyperfine "~/projects/uv/target/profiling/uv build"
Time (mean ± σ): 270.5 ms ± 18.4 ms [User: 230.8 ms, System: 44.5 ms]
Range (min … max): 250.7 ms … 298.4 ms 10 runs
```
## Summary
This proposes adding the command line option `uv pip uninstall --dry-run
...`, complementing the existing `uv pip install --dry-run ...` added
for #1244 in #1436.
This option does not exist in PyPA's `pip uninstall`, if adopted it
would be unique to `uv pip`. The code should be considered PoC, it is
baby's first Rust.
The initial motivation was while investigating
https://github.com/moreati/ansible-uv/issues/2 - to allow Ansible module
`moreati.uv.pip` to work with`state: absent` in "check_mode" (Ansible's
equivalent of a dry run), without requiring `packaging` or `setuptools`.
## Test Plan
One new unit test has been added. I pedge to add more if the feature is
desired/accepted
Example usage
```console
➜ uv git:(pip-uninstall--dry-run) rm -rf .venv
➜ uv git:(pip-uninstall--dry-run) ./target/debug/uv venv
Using CPython 3.13.0
Creating virtual environment at: .venv
Activate with: source .venv/bin/activate
➜ uv git:(pip-uninstall--dry-run) ./target/debug/uv pip install httpx
Resolved 7 packages in 178ms
Prepared 5 packages in 60ms
Installed 7 packages in 15ms
+ anyio==4.6.2.post1
+ certifi==2024.8.30
+ h11==0.14.0
+ httpcore==1.0.7
+ httpx==0.28.0
+ idna==3.10
+ sniffio==1.3.1
➜ uv git:(pip-uninstall--dry-run) ./target/debug/uv pip uninstall --dry-run httpx
Would uninstall 1 package
- httpx==0.28.0
➜ uv git:(pip-uninstall--dry-run) ./target/debug/uv pip list
Package Version
-------- -----------
anyio 4.6.2.post1
certifi 2024.8.30
h11 0.14.0
httpcore 1.0.7
httpx 0.28.0
idna 3.10
sniffio 1.3.1
```
---------
Co-authored-by: Charlie Marsh <charlie.r.marsh@gmail.com>
<!--
Thank you for contributing to uv! To help us review effectively, please
ensure that:
- The pull request includes a summary of the change.
- The title is descriptive and concise.
- Relevant issues are referenced where applicable.
-->
## Summary
Resolves#9333
This pull request introduces support for the `--no-extra` command-line
flag and the corresponding `no-extra` UV setting.
### Behavior
- When `--all-extras` is supplied, the specified extras in `--no-extra`
will be excluded from the installation.
- If `--all-extras` is not supplied, `--no-extra` has no effect and is
safely ignored.
## Test Plan
Since `ExtrasSpecification::from_args` and
`ExtrasSpecification::extra_names` are the most important parts in the
implementation, I added the following tests in the
`uv-configuration/src/extras.rs` module:
- **`test_no_extra_full`**: Verifies behavior when `no_extra` includes
the entire list of extras.
- **`test_no_extra_partial`**: Tests partial exclusion, ensuring only
specified extras are excluded.
- **`test_no_extra_empty`**: Confirms that no extras are excluded if
`no_extra` is empty.
- **`test_no_extra_excessive`**: Ensures the implementation ignores
`no_extra` values that don't match any available extras.
- **`test_no_extra_without_all_extras`**: Validates that `no_extra` has
no effect when `--all-extras` is not supplied.
- **`test_no_extra_without_package_extras`**: Confirms correct behavior
when no extras are available in the package.
- **`test_no_extra_duplicates`**: Verifies that duplicate entries in
`pkg_extras` or `no_extra` do not cause errors.
---------
Co-authored-by: Charlie Marsh <charlie.r.marsh@gmail.com>
## Summary
This adds a `--prune` flag to the `export` command to correspond with
the `--prune` flag of the `tree` command.
The purpose is for generating a `requirements.txt` that omits a package
and all of that package's unique dependencies. This is useful for cases
where the project has a dependency on a common core package, but where
that package does not need to be installed in the target environment.
For example, a pyspark job needs spark for development, but when
installing into a cluster that already has pyspark installed, it is
desirable to omit pyspark's whole dependency tree so that only the
unique dependencies that your job needs get installed, and do not risk
breaking the pyspark dependencies with something incompatible.
Dev groups cannot always cover this case because there are other
projects where this common dependency occurs as a transitive. One
example is Airflow providers, which include Airflow itself as a
dependency, but it is unnecessary and undesirable to include Airflow's
dependency tree in the `requirements.txt` for your DAGs.
Partly related to #7214, though I'm not sure it covers the ask in that
one of having this functionality extend to the project's actual
published metadata.
## Test Plan
An integration test was added, and some manual testing. Let me know if
more would be better.
---------
Co-authored-by: Charlie Marsh <charlie.r.marsh@gmail.com>
## Summary
`--upgrade` isn't useful, since it's the default. So it's now hidden,
but continues to warn if you enable it.
`--no-upgrade` isn't useful, since it panics. So it's now removed
entirely. This isn't breaking, since it already didn't work.
`--upgrade-package` actually _is_ useful, because it turns out it allows
things like: `uv tool upgrade babel --upgrade-package "babel<0.2.14"` to
constrain the upgrade.
I left this in place but hid it... I think we should provide a better
workflow for this, like `uv tool upgrade "babel<0.2.14"`? It's strange
to specify the package twice, and that `uv tool upgrade` has an
`--upgrade-package` flag.
Closes https://github.com/astral-sh/uv/issues/9317.
## Summary
I find myself messing this up with `--build-constraint` vs.
`--build-constraints`, and it turns out our own CLI isn't fully
consistent here either.
- Adds a collapsible section for the project concept
- Splits the project concept document into several child documents.
- Moves the workspace and dependencies documents to under the project
section
- Adds a mkdocs plugin for redirects, so links to the moved documents
still work
I attempted to make the minimum required changes to the contents of the
documents here. There is a lot of room for improvement on the content of
each new child document. For review purposes, I want to do that work
separately. I'd prefer if the review focused on this structure and idea
rather than the content of the files.
I expect to do this to other documentation pages that would otherwise be
very nested.
The project concept landing page and nav (collapsed by default) looks
like this now:
<img width="1507" alt="Screenshot 2024-11-14 at 11 28 45 AM"
src="https://github.com/user-attachments/assets/88288b09-8463-49d4-84ba-ee27144b62a5">
<!--
Thank you for contributing to uv! To help us out with reviewing, please
consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title?
- Does this pull request include references to any relevant issues?
-->
## Summary
<!-- What's the purpose of the change? What does it do, and why? -->
PR #4965 added `*-manylinux_2_31` as a target triple, and issue #4966
described the need for a more general solution.
In lieu of a general solution, this PR adds further explicit manylinux
target triples for different glibc version up to the one used by the
latest Ubuntu release (glibc 2.40 used in Ubuntu 24.10).
## Test Plan
<!-- How was it tested? -->
Local, manual testing with a Python wheel targeting
`x86_64-manylinux_2_35`.
Fixes#9164
Using clap's `default_value_t` makes the `flag` function unhappy, so
just set the default when we unwrap. Tested with no flags,
`--verify-hashes`, `--no-verify-hashes` and setting in uv.toml
---------
Co-authored-by: Charlie Marsh <charlie.r.marsh@gmail.com>
<!--
Thank you for contributing to uv! To help us out with reviewing, please
consider the following:
- Does this pull request include a summary of the change? (See below.)
-->
## Summary
Adds python-install-mirror and pypy-install-mirror as keys for uv.toml,
and cli args for `uv python install`.
Could leave the cli args out if we think the env vars and configs are
sufficient.
Fixes#8186
<!-- What's the purpose of the change? What does it do, and why? -->
---------
Co-authored-by: Zanie Blue <contact@zanie.dev>
## Summary
As an oversight, these arguments weren't being respected from the CLI or
elsewhere -- we always hit PyPI, ignored `--exclude-newer`, etc. It has
to do with the way that the `PipOptions` are setup -- there's a global
struct that we pass around everywhere and fill in with defaults, so
there's no type safety to guarantee that we provide whatever it is we
need to use in the command. The newer APIs are much better about this.
Closes#8927.
Not verifying the certificates of certain hosts should be supported for
all kinds of HTTPS connections, so we're making it a global option, just
like native tls. This fixes the remaining places using a client but were
not configuring allow insecure host.
Fixes#6983 (i think)
Closes#6983
---------
Co-authored-by: Charlie Marsh <charlie.r.marsh@gmail.com>
These settings can only be defined in `pyproject.toml`, since they're
project-centric, and not _configuration_.
Closes https://github.com/astral-sh/uv/issues/8539.
---------
Co-authored-by: Zanie Blue <contact@zanie.dev>
Co-authored-by: Charlie Marsh <charlie.r.marsh@gmail.com>
Co-authored-by: konsti <konstin@mailbox.org>
e.g.
```
❯ echo "anyio" | cargo run -q -- pip compile - -v
DEBUG uv 0.4.30 (107ab3d71 2024-11-07)
DEBUG Starting Python discovery for a default Python
DEBUG Looking for exact match for request a default Python
DEBUG Searching for default Python interpreter in virtual environments, managed installations, or search path
DEBUG Found `cpython-3.12.7-macos-aarch64-none` at `/Users/zb/workspace/uv/.venv/bin/python3` (virtual environment)
```
```
❯ cargo run -q -- pip install anyio -v
DEBUG uv 0.4.30 (107ab3d71 2024-11-07)
DEBUG Searching for default Python interpreter in virtual environments
DEBUG Found `cpython-3.12.7-macos-aarch64-none` at `/Users/zb/workspace/uv/.venv/bin/python3` (virtual environment)
```
vs
```
❯ uv pip install anyio -v
DEBUG uv 0.4.30 (61ed2a236 2024-11-04)
DEBUG Searching for default Python interpreter in system path
DEBUG Found `cpython-3.12.7-macos-aarch64-none` at `/Users/zb/workspace/uv/.venv/bin/python3` (virtual environment)
```
```
❯ echo "anyio" | uv pip compile - -v
DEBUG uv 0.4.30 (61ed2a236 2024-11-04)
DEBUG Starting Python discovery for a default Python
DEBUG Looking for exact match for request a default Python
DEBUG Searching for default Python interpreter in managed installations or system path
DEBUG Found `cpython-3.12.7-macos-aarch64-none` at `/Users/zb/workspace/uv/.venv/bin/python3` (virtual environment)
```
Previously, we'd use the `--reinstall` flag to determine if we should
replace existing Python executables in the bin directory during an
install. There are a few problems with this:
- We replace executables we don't manage
- We can replace executables from other uv Python installations during
reinstall (surprising)
- We don't do the "right" thing when installing patch versions e.g.
installing `3.12.4` then `3.12.6` would fail without the reinstall flag
In `uv tool`, we have separate `--force` and `--reinstall` concepts.
Here we separate the flags (`--force` was previously just a
`--reinstall` alias) and add inspection of the existing executables to
inform a decision on replacement.
In brief, we will:
- Replace any executables with `--force`
- Replace executables for the same installation with `--reinstall`
- Replace executables for an older patch version by default
## Summary
This PR pulls in https://github.com/astral-sh/uv/pull/8263 and
https://github.com/astral-sh/uv/pull/8463, which were originally merged
into the v0.5 tracking branch but can now be committed separately, as
we've made `.env` loading opt-in.
In summary:
- `.env` loading is now opt-in (`--env-file .env`).
- `.env` remains supported on `uv run`, so it's meant for providing
environment variables to the run command, rather than to uv itself.
---------
Co-authored-by: Eduardo González Vaquero <47718648+edugzlez@users.noreply.github.com>
## Summary
This PR enables `uv sync --all-packages` to sync all packages in a
workspace. It removes a common use-case for the legacy non-`[project]`
packages that we're trying to move away from.
Closes https://github.com/astral-sh/uv/issues/8724.
Updates `uv python install` to link `python3.x` in the executable
directory (i.e., `~/.local/bin`) to the the managed interpreter path.
Includes
- #8569
- #8571
Remaining work
- #8663
- #8650
- Add an opt-out setting and flag
- Update documentation
Refs:
- #8626
## Summary
Current documentation incorrectly suggests that the macOS cache
directory location is `$HOME/Library/Caches/uv`, but that changed in:
- #5806
Updates docs to say this instead:
> <p>Defaults to <code>$HOME/.cache/uv</code> on macOS,
<code>$XDG_CACHE_HOME/uv</code> or <code>$HOME/.cache/uv</code> on
Linux, and <code>%LOCALAPPDATA%\uv\cache</code> on Windows. The <code>uv
cache dir</code> command will show the location of the cache
directory.</p>
---------
Co-authored-by: Charlie Marsh <charlie.r.marsh@gmail.com>
The changes in this commit introduce the `UV_NO_PROGRESS` environment
variable as an alternative way to control progress output suppression in
uv-cli, equivalent to using the `--no-progress` flag. This enhancement
simplifies configuration in CI environments and automated scripts by
eliminating the need to detect whether the script is running in a CI
environment.
Previously, disabling progress output required either passing the
`--no-progress` flag directly or implementing script logic to detect CI
environments and conditionally add the flag. With this change, users can
now simply set `UV_NO_PROGRESS=true` in their environment to achieve the
same effect.
The changes include:
- Adding the `UV_NO_PROGRESS` environment variable to the `EnvVars`
struct in `crates/uv-static/src/env_vars.rs`.
- Updating the `GlobalArgs` struct in `crates/uv-cli/src/lib.rs` to
include a new `no_progress` field that is bound to the `UV_NO_PROGRESS`
environment variable.
- Adding documentation for the new `UV_NO_PROGRESS` environment variable
in `docs/configuration/environment.md`.
## Test Plan
After creating a uv project using `uv init` in a temp directory in this
project:
```
cargo run cache clean && cargo run venv && UV_NO_PROGRESS=false cargo run sync
cargo run cache clean && cargo run venv && cargo run sync
```
produce the expected default behavior
```
cargo run cache clean && cargo run venv && UV_NO_PROGRESS=false cargo run sync
```
produces the same behavior as having the `--no-progress` flag.
This PR adds support for `tool.uv.default-groups`, which defaults to
`["dev"]` for backwards-compatibility. These represent the groups we
sync by default.
Part of #8090
Adds the ability to include a group (`--group`) in the sync or _only_
sync a group (`--only-group`). Includes all groups in the resolution,
which will have the same limitations as extras as described in #6981.
There's a great deal of refactoring of the "development" concept into
"groups" behind the scenes that I am continuing to defer here to
minimize the diff.
Additionally, this does not yet resolve interactions with the existing
`dev` group — we'll tackle that separately as well. I probably won't
merge the stack until that design is resolved. The current proposal is
that we'll just "combine' the `dev-dependencies` contents into the `dev`
group.
Part of #8090
Adds the ability to add and remove dependencies from arbitrary groups
using `uv add` and `uv remove`. Does not include resolving with the new
dependencies — tackling that in #8110.
Additionally, this does not yet resolve interactions with the existing
`dev` group — we'll tackle that separately as well. I probably won't
merge the stack until that design is resolved.
## Summary
These two sentences in the docs for `--publish-url` seem to basically be
duplicates:
3eda248ef5/crates/uv-cli/src/lib.rs (L4616-L4618)
I found the first to be easier to read, so this commit removes the
second.
## Test Plan
No tests, change is docs-only.
---------
Co-authored-by: Zanie Blue <contact@zanie.dev>
## Summary
For example, in:
```toml
[tool.uv]
[[tool.uv.index]]
name = "pytorch"
url = "https://download.pytorch.org/whl/cu121"
```
We can just omit `[tool.uv]`.
## Summary
Historically, we haven't enforced schema versions. This PR adds a
versioning policy such that, if a uv version writes schema v2, then...
- It will always reject lockfiles with schema v3 or later.
- It _may_ reject lockfiles with schema v1, but can also choose to read
them, if possible.
(For example, the change we proposed to rename `dev-dependencies` to
`dependency-groups` would've been backwards-compatible: newer versions
of uv could still read lockfiles that used the `dev-dependencies` field
name, but older versions should reject lockfiles that use the
`dependency-groups` field name.)
Closes https://github.com/astral-sh/uv/issues/8465.
<!--
Thank you for contributing to uv! To help us out with reviewing, please
consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title?
- Does this pull request include references to any relevant issues?
-->
## Summary
<!-- What's the purpose of the change? What does it do, and why? -->
Fix the flag description: `to detect and with` --> `to detect packages
with`
This PR adds support for `uv lock --dry-run`, as described in issue
#6408.
One thing to note: this functionality, as implemented, isn't limited to
`-U` (if someone adds a dependency to the project's `pyproject.toml`,
the plan will include these changes).
---------
Co-authored-by: Charlie Marsh <charlie.r.marsh@gmail.com>
## Summary
This PR adds a first-class API for defining registry indexes, beyond our
existing `--index-url` and `--extra-index-url` setup.
Specifically, you now define indexes like so in a `uv.toml` or
`pyproject.toml` file:
```toml
[[tool.uv.index]]
name = "pytorch"
url = "https://download.pytorch.org/whl/cu121"
```
You can also provide indexes via `--index` and `UV_INDEX`, and override
the default index with `--default-index` and `UV_DEFAULT_INDEX`.
### Index priority
Indexes are prioritized in the order in which they're defined, such that
the first-defined index has highest priority.
Indexes are also inherited from parent configuration (e.g., the
user-level `uv.toml`), but are placed after any indexes in the current
project, matching our semantics for other array-based configuration
values.
You can mix `--index` and `--default-index` with the legacy
`--index-url` and `--extra-index-url` settings; the latter two are
merely treated as unnamed `[[tool.uv.index]]` entries.
### Index pinning
If an index includes a name (which is optional), it can then be
referenced via `tool.uv.sources`:
```toml
[[tool.uv.index]]
name = "pytorch"
url = "https://download.pytorch.org/whl/cu121"
[tool.uv.sources]
torch = { index = "pytorch" }
```
If an index is marked as `explicit = true`, it can _only_ be used via
such references, and will never be searched implicitly:
```toml
[[tool.uv.index]]
name = "pytorch"
url = "https://download.pytorch.org/whl/cu121"
explicit = true
[tool.uv.sources]
torch = { index = "pytorch" }
```
Indexes defined outside of the current project (e.g., in the user-level
`uv.toml`) can _not_ be explicitly selected.
(As of now, we only support using a single index for a given
`tool.uv.sources` definition.)
### Default index
By default, we include PyPI as the default index. This remains true even
if the user defines a `[[tool.uv.index]]` -- PyPI is still used as a
fallback. You can mark an index as `default = true` to (1) disable the
use of PyPI, and (2) bump it to the bottom of the prioritized list, such
that it's used only if a package does not exist on a prior index:
```toml
[[tool.uv.index]]
name = "pytorch"
url = "https://download.pytorch.org/whl/cu121"
default = true
```
### Name reuse
If a name is reused, the higher-priority index with that name is used,
while the lower-priority indexes are ignored entirely.
For example, given:
```toml
[[tool.uv.index]]
name = "pytorch"
url = "https://download.pytorch.org/whl/cu121"
[[tool.uv.index]]
name = "pytorch"
url = "https://test.pypi.org/simple"
```
The `https://test.pypi.org/simple` index would be ignored entirely,
since it's lower-priority than `https://download.pytorch.org/whl/cu121`
but shares the same name.
Closes#171.
## Future work
- Users should be able to provide authentication for named indexes via
environment variables.
- `uv add` should automatically write `--index` entries to the
`pyproject.toml` file.
- Users should be able to provide multiple indexes for a given package,
stratified by platform:
```toml
[tool.uv.sources]
torch = [
{ index = "cpu", markers = "sys_platform == 'darwin'" },
{ index = "gpu", markers = "sys_platform != 'darwin'" },
]
```
- Users should be able to specify a proxy URL for a given index, to
avoid writing user-specific URLs to a lockfile:
```toml
[[tool.uv.index]]
name = "test"
url = "https://private.org/simple"
proxy = "http://<omitted>/pypi/simple"
```
<!--
Thank you for contributing to uv! To help us out with reviewing, please
consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title?
- Does this pull request include references to any relevant issues?
-->
First off, congratulations on the 0.3 release! The PEP 723 standalone
scripts support is awesome, and I can already imagine a long tail of
little scripts of my own that would benefit from this functionality.
## Background
I really like the Deno CLI's support for running and installing remote
scripts.
```
deno run <url>
```
```
deno install --name foo <url>
```
I can see parallels with `uv run` and `uvx`. After mentioning this on
Discord, @zanieb suggested I could take a stab at a PR to implement
similar functionality for uv.
## Summary
This PR attempts to add support for executing remote standalone scripts
directly with `uv run`. While this is already possible by downloading
the script (i.e., via curl/wget) and then using uv run, having direct
support would be convenient.
The proposed functionality is:
```sh
uv run <url>
```
Another addition/alternative could be to support running scripts via
stdin:
```sh
curl -sL <url> | uv run -
```
But that is not implemented in this PR.
## Test Plan
I noticed that GitHub and `files.pythonhosted.org` URLs are used in some
of the tests. I've created a personal [GitHub
Gist](https://gist.github.com/manzt/cb24f3066c32983672025b04b9f98d1f)
with the example from PEP 723 for now to test this functionality.
~However, I couldn't figure out how to get the `with_snapshot` config
filter to filter out the tempfile path, so the test is currently
failing. Any assistance with this would be appreciated.~
## Notes
I'm not totally pleased with the implementation of this PR. I think it
would be better to handle the case earlier (and probably reuse the
cache), and avoid mutation, but since run command requires a local path
this was the simplest implementation I could come up with.
I know that performance is paramount with uv so I totally understand if
this requires a different approach or something more explicit to avoid
"inferring" the path. I'm just taking this as an opportunity to learn a
little more Rust and acquaint myself with the code base. cheers!
---------
Co-authored-by: Andrew Gallant <jamslam@gmail.com>
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
## Summary
This PR adds the ability to list available scripts in the environment
when `uv run` is invoked without any arguments.
It somewhat mimics the behavior of `rye run` command
(See https://rye.astral.sh/guide/commands/run).
This is an attempt to fix#4024.
## Test Plan
I added test cases. The CI pipeline should pass.
### Manuel Tests
```shell
❯ uv run
Provide a command or script to invoke with `uv run <command>` or `uv run script.py`.
The following scripts are available:
normalizer
python
python3
python3.12
See `uv run --help` for more information.
```
---------
Signed-off-by: Kemal Akkoyun <kakkoyun@gmail.com>
Co-authored-by: Zanie Blue <contact@zanie.dev>
Improve hints when using the simple index URL instead of the upload URL
in `uv publish`. This is the most common confusion when publishing, so
we give it some extra care and put it more centrally in the CLI help.
Fixes#7860
---------
Co-authored-by: Zanie Blue <contact@zanie.dev>
## Summary
This PR adds support for the `UV_FIND_LINKS` environment variable as an
alternative to the `--find-links` command-line option, as requested in
#1839.
## Test Plan
A unit test was added to validate that setting `UV_FIND_LINKS` provided
the same result as a link provided with the `--find-links` command-line
option.
---------
Co-authored-by: Charlie Marsh <charlie.r.marsh@gmail.com>
## Summary
I have a workflow where I want use `uv` as a dependency solver only, and
manage my environments with external tooling (Nix).
## Test Plan
Manually tested. Automated testing seems excessive for such a trivial
change.
## Problems
It's still not as useful as I'd like it to be.
`uv` uncondtionally creates a virtual environment, something I would
expect that `--no-sync` should disable.
This looks a bit more tricky to achieve and I'm not sure about how to
best structure it.
## Summary
This is another attempt using `module: bool` instead of `module:
Option<String>` following #7322.
The original PR can't be reopened after a force-push to the branch, I've
created this new PR.
Resolves#6638
## Summary
Resolves#7705
## Test Plan
`cargo test` and tested locally.
The snapshots were unstable due to the packages being built in a
non-deterministic order, so I used the quiet flag to suppress the
output.
Another question is whether we should label the build output to indicate
which package it belongs to?
## Summary
Similiar to `cargo init --vcs <VCS>`, this PR adds the `--vcs <VCS>`
flag for `uv init`, allowing to create a version control system during
initialization. By default, `uv init` will create a Git repository if
the `--vcs` flag is not provided. Use `--vcs none` to disable this
feature.
Currently, only Git is supported. While Cargo also supports hg, pijul,
and fossil, this initial PR only includes Git. We can add more later if
there are any user requests.
---------
Co-authored-by: Charlie Marsh <charlie.r.marsh@gmail.com>
This PR adds support for ```uv init --script```, as defined in issue
#7402 (started working on this before I saw jbvsmo's PR). Wanted to
highlight a few decisions I made that differ from the existing PR:
1. ```--script``` takes a path, instead of a path/name. This potentially
leads to a little ambiguity (I can certainly elaborate in the docs,
lmk!), but strictly allowing ```uv init --script path/to/script.py```
felt a little more natural than allowing for ```uv init --script path/to
--name script.py``` (which I also thought would prompt more questions
for users, such as should the name include the .py extension?)
2. The request is processed immediately in the ```init``` method,
sharing logic in resolving which python version to use with ```uv add
--script```. This made more sense to me — since scripts are meant to
operate in isolation, they shouldn't consider the context of an
encompassing package should one exist (I also think this decision makes
the relative codepaths for scripts/packages easier to follow).
3. No readme — readme felt a little excessive for a script, but I can of
course add it in!
---------
Co-authored-by: João Bernardo Oliveira <jbvsmo@gmail.com>
This PR adds support for upgrading the build environment of tools with
the addition of a ```--python``` argument to ```uv upgrade```, as
specified in #7471.
Some things to note:
- I added support for individual packages — I didn't think there was a
good reason for ```--python``` to only apply to all packages
- Upgrading with ```--python``` also upgrades the package itself — I
think this is fair as if a user wants to _strictly_ switch the version
of Python being used to build a tool's environment they can use ```uv
install```. This behavior can of course be modified if others don't
agree!
Closes https://github.com/astral-sh/uv/issues/6297.
Closes https://github.com/astral-sh/uv/issues/7471.
## Summary
`uv run --project ./path/to/project` now uses the provided directory as
the starting point for any file discovery. However, relative paths are
still resolved relative to the current working directory.
Closes https://github.com/astral-sh/uv/issues/5613.
## Summary
Improve the description of override-dependencies based on the statement
in `concepts/resolution.md`: "As with constraints, overrides do not add
a dependency on the package and only take effect if the package is
requested in a direct or transitive dependency."
I tested it locally, `concepts/resolution.md` is correct. It would be
better to also include this in the Reference Chapter of the docs.
## Summary
This PR enables users to provide pre-defined static metadata for
dependencies. It's intended for situations in which the user depends on
a package that does _not_ declare static metadata (e.g., a
`setup.py`-only sdist), and that is expensive to build or even cannot be
built on some architectures. For example, you might have a Linux-only
dependency that can't be built on ARM -- but we need to build that
package in order to generate the lockfile. By providing static metadata,
the user can instruct uv to avoid building that package at all.
For example, to override all `anyio` versions:
```toml
[project]
name = "project"
version = "0.1.0"
requires-python = ">=3.12"
dependencies = ["anyio"]
[[tool.uv.dependency-metadata]]
name = "anyio"
requires-dist = ["iniconfig"]
```
Or, to override a specific version:
```toml
[project]
name = "project"
version = "0.1.0"
requires-python = ">=3.12"
dependencies = ["anyio"]
[[tool.uv.dependency-metadata]]
name = "anyio"
version = "3.7.0"
requires-dist = ["iniconfig"]
```
The current implementation uses `Metadata23` directly, so we adhere to
the exact schema expected internally and defined by the standards. Any
entries are treated similarly to overrides, in that we won't even look
for `anyio@3.7.0` metadata in the above example. (In a way, this also
enables #4422, since you could remove a dependency for a specific
package, though it's probably too unwieldy to use in practice, since
you'd need to redefine the _rest_ of the metadata, and do that for every
package that requires the package you want to omit.)
This is under-documented, since I want to get feedback on the core ideas
and names involved.
Closes https://github.com/astral-sh/uv/issues/7393.
<!--
Thank you for contributing to uv! To help us out with reviewing, please
consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title?
- Does this pull request include references to any relevant issues?
-->
## Summary
<!-- What's the purpose of the change? What does it do, and why? -->
close#6272
## Test Plan
<!-- How was it tested? -->
As in https://github.com/astral-sh/uv/pull/6262
---------
Co-authored-by: Zanie Blue <contact@zanie.dev>
<!--
Thank you for contributing to uv! To help us out with reviewing, please
consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title?
- Does this pull request include references to any relevant issues?
-->
## Summary
Part of https://github.com/astral-sh/uv/issues/7007.
Settings documentation reference currently doesn't separate "project
metadata" and "configuration" options, implying that it's possible to
set things like `dev-dependencies` in `uv.toml` while it's not. This is
an attempt at better separating those options, by having 2 different
sections:
- `Project metadata`, that holds configuration that can only be set in
`pyproject.toml`
- `Configuration`, that holds configuration that can be set both in
`pyproject.toml` and `uv.toml`
Here are some screenshots to show what this looks like (note that I
don't have code highlighting in the right navigation, which makes them
clunky, as first item is always bigger because of the missing "span" --
I think that's because it's an `mkdocs-material` insider feature, since
I have the same thing on `main` branch):
- Right side navigation:
<img width="241" alt="Screenshot 2024-09-05 at 01 19 50"
src="https://github.com/user-attachments/assets/012f64a4-8d34-4e34-a506-8d02dc1fbf98">
<img width="223" alt="Screenshot 2024-09-05 at 01 20 01"
src="https://github.com/user-attachments/assets/0b0fb71d-c9c3-4ee3-8f6e-cf35180b1a99">
- An option from "Project metadata" section that only applies to
`pyproject.toml`:
<img width="788" alt="Screenshot 2024-09-05 at 01 20 11"
src="https://github.com/user-attachments/assets/64349fbb-8623-4b81-a475-d6ff38c658f1">
- An option from "Configuration" section that applies both to
`pyproject.toml` and `uv.toml`:
<img width="787" alt="Screenshot 2024-09-05 at 01 20 33"
src="https://github.com/user-attachments/assets/732e43d3-cc64-4f5a-8929-23a5555d4c53">
## Test Plan
Local run of the documentation.
Co-authored-by: Charlie Marsh <charlie.r.marsh@gmail.com>
Summary
This pull request fixes a typo in the --build-constraints flag, which
should be singular (--build-constraint). This update ensures consistency
across the documentation and prevents potential confusion for users.
Closes#7315
## Test Plan
The change was verified by reviewing the relevant documentation files
where the flag is referenced. No functional code changes were made, so
no additional testing is required beyond confirming the documentation
update.
## Tested
The change was tested by visually inspecting the updated documentation
to confirm that the typo has been corrected
## Summary
This has been asked for a few times. There are risks that these checks
could be slow, but they're buyer-beware.
Closes https://github.com/astral-sh/uv/issues/7246.
## Summary
This PR adds a more flexible cache invalidation abstraction for uv, and
uses that new abstraction to improve support for dynamic metadata.
Specifically, instead of relying solely on a timestamp, we now pass
around a `CacheInfo` struct which (as of now) contains
`Option<Timestamp>` and `Option<Commit>`. The `CacheInfo` is saved in
`dist-info` as `uv_cache.json`, so we can test already-installed
distributions for cache validity (along with testing _cached_
distributions for cache validity).
Beyond the defaults (`pyproject.toml`, `setup.py`, and `setup.cfg`
changes), users can also specify additional cache keys, and it's easy
for us to extend support in the future. Right now, cache keys can either
be instructions to include the current commit (for `setuptools_scm` and
similar) or file paths (for `hatch-requirements-txt` and similar):
```toml
[tool.uv]
cache-keys = [{ file = "requirements.txt" }, { git = true }]
```
This change should be fully backwards compatible.
Closes https://github.com/astral-sh/uv/issues/6964.
Closes https://github.com/astral-sh/uv/issues/6255.
Closes https://github.com/astral-sh/uv/issues/6860.
## Summary
Explicitly list the formats and extensions that uv supports, based on
[this
list](86ee8d2c01/crates/distribution-filename/src/extension.rs (L70-L77)).
Not a huge fan of adding the section in `concepts/resolution.md`, but I
did not find a better place. Alternatively we could maybe add a
dedicated page that shortly explains Python package types (wheels,
sdists), where such a section could live?
## Test Plan
Local run of the documentation.
## Summary
Like `uv sync`, you can omit the current project (`--no-emit-project`),
a specific package (`--no-emit-package`), or the entire workspace
(`--no-emit-workspace`).
Closes https://github.com/astral-sh/uv/issues/6960.
Closes#6995.
## Summary
This PR adds `--package` support to `uv build`, such that you can use
`--package` from anywhere in a workspace to build any member.
If a source directory is provided, we use that as the workspace root.
If a file is provided, we error.
For now, `uv build` only builds the current package, making it
semantically identical to `uv sync`.
## Summary
This PR allows users to run `uv build --wheel ./path/to/source.tar.gz`
to build a wheel from a source distribution. This is also the default
behavior if you run `uv build ./path/to/source.tar.gz`. If you pass
`--sdist`, we error.
## Summary
This PR exposes uv's PEP 517 implementation via a `uv build` frontend,
such that you can use `uv build` to build source and binary
distributions (i.e., wheels and sdists) from a given directory.
There are some TODOs that I'll tackle in separate PRs:
- [x] Support building a wheel from a source distribution (rather than
from source) (#6898)
- [x] Stream the build output (#6912)
Closes https://github.com/astral-sh/uv/issues/1510
Closes https://github.com/astral-sh/uv/issues/1663.
## Summary
I'm not convinced that the behavior is correct as-implemented. When the
user passes a `--python >=3.8` or we discover a `requires-python` from
the workspace, we're currently writing that request out to
`.python-version`. I would probably rather that we write the resolved
patch version?
Closes https://github.com/astral-sh/uv/issues/6821.
- Respect `UV_PROJECT_ENVIRONMENT` when in project root
- Add `--no-project` and `--no-workspace` to opt-out of above and
`requires-python` detection
- Rename `[NAME]` to `[PATH]` in CLI
## Summary
Noticed that running `cargo dev generate-all` on `main` produced changes
and saw that that the command is not run on the CI nor as a pre-commit
hook.
Not sure if having the command running as a pre-commit hook is something
we want, so I can remove it if you prefer. I find that nice to have as
it's probably easy to forget to run it, especially for new contributors
(and it will only run if there are changes in `uv_cli` or `uv_settings`
crates).
## Test Plan
- Added `cargo dev generate-all --mode check` on the CI, which produced
[this failing
job](https://github.com/astral-sh/uv/actions/runs/10648055597/job/29516699393)
- Ran `cargo dev generate-all` locally and committed the changes, which
produced [this succeeding
job](https://github.com/astral-sh/uv/actions/runs/10648076910/job/29516744942)
Our current strategy of parsing the output of `py --list-paths` to get
the installed python versions on windows is brittle (#6524, missing
`py`, etc.) and it's slow (10ms last time i measured).
Instead, we should behave spec-compliant and read the python versions
from the registry following PEP 514.
It's not fully clear which errors we should ignore and which ones we
need to raise.
We're using the official rust-for-windows crates for accessing the
registry.
Fixes#1521Fixes#6524
## Summary
The interface here is intentionally a bit more limited than `uv pip
compile`, because we don't want `requirements.txt` to be a system of
record -- it's just an export format. So, we don't write annotation
comments (i.e., which dependency is requested from which), we don't
allow writing extras, etc. It's just a flat list of requirements, with
their markers and hashes.
Closes#6007.
Closes#6668.
Closes#6670.
Changes the `uv init` experience with a focus on working for more
use-cases out of the box.
- Adds `--app` and `--lib` options to control the created project style
- Changes the default from a library with `src/` and a build backend
(`--lib`) to an application that is not packaged (`--app`)
- Hides the `--virtual` option and replaces it with `--package` and
`--no-package`
- `--no-package` is not allowed with `--lib` right now, but it could be
in the future once we understand a use-case
- Creates a runnable project
- Applications have a `hello.py` file which you can run with `uv run
hello.py`
- Packaged applications, e.g., `uv init --app --package` create a
package and script entrypoint, which you can run with `uv run hello`
- Libraries provide a demo API function, e.g., `uv run python -c "import
name; print(name.hello())"` — this is unchanged
Closes#6471
## Summary
The basic idea here is: any project can either be a package, or not
("virtual").
If a project is virtual, we don't build or install it.
A project is virtual if either of the following are true:
- `tool.uv.virtual = true` is set.
- `[build-system]` is absent.
The concept of "virtual projects" only applies to workspace member right
now; it doesn't apply to `path` dependencies which are treated like
arbitrary Python source trees.
TODOs that should be resolved prior to merging:
- [ ] Documentation
- [ ] How do we reconcile this with "virtual workspace roots" which are
a little different -- they omit `[project]` entirely and don't even have
a name?
- [x] `uv init --virtual` should create a virtual project rather than a
virtual workspace.
- [x] Running `uv sync` in a virtual project after `uv init --virtual`
shows `Audited 0 packages in 0.01ms`, which is awkward. (See:
https://github.com/astral-sh/uv/pull/6588.)
Closes https://github.com/astral-sh/uv/issues/6511.
## Summary
This PR revives https://github.com/astral-sh/uv/pull/4944, which I think
was a good start towards adding `--trusted-host`. Last night, I tried to
add `--trusted-host` with a custom verifier, but we had to vendor a lot
of `reqwest` code and I eventually hit some private APIs. I'm not
confident that I can implement it correctly with that mechanism, and
since this is security, correctness is the priority.
So, instead, we now use two clients and multiplex between them.
Closes https://github.com/astral-sh/uv/issues/1339.
## Test Plan
Created self-signed certificate, and ran `python3 -m http.server --bind
127.0.0.1 4443 --directory . --certfile cert.pem --keyfile key.pem` from
the packse index directory.
Verified that `cargo run pip install
transitive-yanked-and-unyanked-dependency-a-0abad3b6 --index-url
https://127.0.0.1:8443/simple-html` failed with:
```
error: Request failed after 3 retries
Caused by: error sending request for url (https://127.0.0.1:8443/simple-html/transitive-yanked-and-unyanked-dependency-a-0abad3b6/)
Caused by: client error (Connect)
Caused by: invalid peer certificate: Other(OtherError(CaUsedAsEndEntity))
```
Verified that `cargo run pip install
transitive-yanked-and-unyanked-dependency-a-0abad3b6 --index-url
'https://127.0.0.1:8443/simple-html' --trusted-host '127.0.0.1:8443'`
failed with the expected error (invalid resolution) and made valid
requests.
Verified that `cargo run pip install
transitive-yanked-and-unyanked-dependency-a-0abad3b6 --index-url
'https://127.0.0.1:8443/simple-html' --trusted-host '127.0.0.2' -n` also
failed.
## Summary
We now respect the `environments` field in `uv pip compile --universal`,
e.g.:
```toml
[tool.uv]
environments = ["platform_system == 'Emscripten'"]
```
Closes https://github.com/astral-sh/uv/issues/6641.
Previously, we excluded these and only looked at system interpreters.
However, it makes sense for this to match the typical Python discovery
experience. We could consider swapping the default... I'm not sure what
makes more sense. If we change the default (as written now) — this could
arguably be a breaking change.
Docs show an underscore which should be a dash in dev-dependencies:
`dev_dependencies = ["ruff==0.5.0"]`
## Summary
I followed the example in the references settings and used
dev_dependencies in my pyproject.toml but it seems like this needs to be
a dash instead of an underscore:
=> ERROR [stage-0 5/5] RUN uv sync 6.9s
------
> [stage-0 5/5] RUN uv sync:
0.085 warning: Failed to parse `pyproject.toml` during settings
discovery:
0.085 TOML parse error at line 65, column 1
0.085 |
0.085 65 | [tool.uv]
0.085 | ^^^^^^^^^
0.085 unknown field `dev_dependencies`
0.085
This is a fallback mode that we supported when we decided to use PEP 517
builds by default. I can't find a single reference to it on GitHub or in
our issue tracker, so I want to drop support for it as part of v0.3.0.
These are global and non-specific to the `pip` API, so I think they
should be elevated.
- Ran `UV_CONCURRENT_DOWNLOADS=1 cargo run pip list`; verified that
`downloads` resolved to 1.
- Added `concurrent-downloads = 5` under `[tool.uv]` in
`pyproject.toml`; ran `cargo run pip list`; verified that `downloads`
resolved to 5.
- Ran `UV_CONCURRENT_DOWNLOADS=1 cargo run pip list`; verified that
`downloads` resolved to 1.
- Removes "experimental" labels from command documentation
- Removes preview warnings
- Removes `PreviewMode` from most structs and methods — we could keep it
around but I figure we can propagate it again easily where needed in the
future
- Enables preview behavior by default everywhere, e.g., `uv venv` will
download Python versions
This PR migrates uv's use of `chrono` to `jiff`.
I did most of this work a while back as one of my tests to ensure Jiff
could actually be used in a real world project. I decided to revive
this because I noticed that `reqwest-retry` dropped its Chrono
dependency,
which is I believe the only other thing requiring Chrono in uv.
(Although, we use a fork of `reqwest-middleware` at present, and that
hasn't been updated to latest upstream yet. I wasn't quite sure of the
process we have for that.)
In course of doing this, I actually made two changes to uv:
First is that the lock file now writes an RFC 3339 timestamp for
`exclude-newer`. Previously, we were using Chrono's `Display`
implementation for this which is a non-standard but "human readable"
format. I think the right thing to do here is an RFC 3339 timestamp.
Second is that, in addition to an RFC 3339 timestamp, `--exclude-newer`
used to accept a "UTC date." But this PR changes it to a "local date."
That is, a date in the user's system configured time zone. I think
this makes more sense than a UTC date, but one alternative is to drop
support for a date and just rely on an RFC 3339 timestamp. The main
motivation here is that automatically assuming UTC is often somewhat
confusing, since just writing an unqualified date like `2024-08-19` is
often assumed to be interpreted relative to the writer's "local" time.
## Summary
The strategy here is: if the user provides supported environments, we
use those as the initial forks when resolving. As a result, we never add
or explore branches that are disjoint with the supported environments.
(If the supported environments change, we ignore the lockfile entirely,
so we don't have to worry about any interactions between supported
environments and the preference forks.)
Closes https://github.com/astral-sh/uv/issues/6184.
Resolve#6152
## Summary
## Test Plan
Execution result of `cargo run generate-shell-completion --help`
```bash
Generate shell completion
Usage: uv generate-shell-completion <SHELL>
Arguments:
<SHELL> The shell to generate the completion script for [possible values: bash, elvish, fish, nushell, powershell, zsh]
```
Execution result of `cargo run help generate-shell-completion`
```bash
Generate shell completion
Usage: uv generate-shell-completion <SHELL>
Arguments:
<SHELL>
The shell to generate the completion script for
[possible values: bash, elvish, fish, nushell, powershell, zsh]
```
## Summary
Resolves https://github.com/astral-sh/uv/issues/4537
- First commit avoids overwriting dependencies with different markers.
- Second commit supports adding from requirements files.
## Test Plan
`cargo test`
## Summary
We now persist the `ResolverInstallerOptions` when writing out a tool
receipt. When upgrading, we grab the saved options, and merge with the
command-line arguments and user-level filesystem settings (CLI > receipt
> filesystem).
The loose consensus is that "fetch" doesn't have much meaning and that a
boolean flag makes more sense from the command line.
1. Adds `--allow-python-downloads` (hidden, default) and
`--no-python-downloads` to the CLI to quickly enable or disable
downloads
2. Deprecates `--python-fetch` in favor of the options from (1)
3. Removes `python-fetch` in favor of a `python-downloads` setting
5. Adds a `never` variant to the enum, allowing even explicit installs
to be disabled via the configuration file
## Test plan
I tested this with various `pyproject.toml`-level settings and `uv venv
--preview --python 3.12.2` and `uv python install 3.12.2` with and
without the new CLI flags.
## Summary
I think this seems reasonable... Otherwise, we might not go back to PyPI
to revalidate the list of available versions despite the user passing
`--upgrade`.
## Summary
Resolves#5188. Most of the changes involve creating a new function in
`tool/common.rs` to contain the common functionality previously found in
`tool/install.rs`.
## Test Plan
`cargo test`
```console
❯ ./target/debug/uv tool upgrade black
warning: `uv tool upgrade` is experimental and may change without warning.
Resolved 6 packages in 25ms
Uninstalled 1 package in 3ms
Installed 1 package in 19ms
- black==23.1.0
+ black==24.4.2
Installed 2 executables: black, blackd
```
Following #5869, the documentation has some less-than-helpful
suggestions to use `uv help python` for details — we should link to the
`uv python` section instead.
## Summary
After referring to https://github.com/astral-sh/uv/pull/5637 and doing
additional testing.
The default value in a stable state seems more reasonable to be
``only-system``. ``managed`` in preview.
```
cpython-3.11.9-windows-x86_64-none C:\Users\name\AppData\Local\Programs\Python\Python311\python.exe
cpython-3.10.14-windows-x86_64-none C:\Users\name\AppData\Roaming\uv\data\python\cpython-3.10.14-windows-x86_64-none\install\python.exe
cpython-3.10.11-windows-x86_64-none C:\Users\name\AppData\Local\Programs\Python\Python310\python.exe
cpython-3.9.19-windows-x86_64-none C:\Users\name\AppData\Roaming\uv\data\python\cpython-3.9.19-windows-x86_64-none\python.exe
```
test on uv 0.2.33 (build from
257007ccaf)
### Stable version
``uv venv -p 3.10`` is ``3.10.11`` (System Python)
``uv venv -p 3.9`` is ``No interpreter found``(3.9.19 for managed
Python)
``uv venv -p 3.9 --python-preference only-system`` is ``No interpreter
found``(fail)
``uv venv -p 3.9 --python-preference only-managed`` is
``3.9.19``(success)
Do not use managed Python, only use the system Python, so it can be
determined as ``only-system``.
### Preview mode
**Note:** ``3.10.14`` is managed python, ``3.10.11`` is system python.
``uv venv -p 3.11 --preview`` is ``3.11.9`` (System Python)
``uv venv -p 3.10 --preview`` is ``3.10.14``
``uv venv -p 3.10 --preview --python-preference only-managed`` is
``3.10.14``
``uv venv -p 3.10 --preview --python-preference managed`` is ``3.10.14``
``uv venv -p 3.10 --preview --python-preference system`` is ``3.10.11``
``venv -p 3.10 --preview --python-preference only-system`` is
``3.10.11``
Prioritize the managed Python and then select the system Python, so it
can be determined as ``managed``.
-----
fixed#5754
## Test Plan
Run website in local.
This PR rewrites the resolver concept and adds a resolver internals page
targeted at power users.
The new resolution concept documentation has three parts:
* An introduction for people how never heard of "resolution" before, and
a motivating example what it does. I've also shoved the part about
equally valid resolutions in there.
* Features you commonly use: Non-universal vs. universal resolution,
lowest resolution amd pre-releases.
* Expert features, we don't advertise them, you'll only need them in
complex cases when you already know and i kept them to the reference
points you need in this case: Constraints, overrides and exclude-newer.
I intentionally didn't lay out any detail of the resolution itself, the
idea is that users get a vague sense of "uv has to select fitting
versions", but then they learn the options they have to use and some
common failure points without ever coming near SAT or even graphs.
The resolution internals reference page is targeted at power users who
need to understand what is going on behind the scenes. It assumes ample
prior knowledge and exists to explain the uv-specific behaviors for
someone who already understands dependency resolution conceptually and
has interacted with their dependency tree before. I had a section on the
lockfile but removed it because it found the lockfile to be too
self-documenting.
I haven't touched the readme.
Closes#5603Closes#5238Closes#5237
---------
Co-authored-by: Zanie Blue <contact@zanie.dev>
## Summary
Partially resolves#5561. Haven't added overrides support yet but I can
add it tomorrow if the current approach for constraints is ok.
## Test Plan
`cargo test`
Manually checked trace logs after changing the constraints.
Zanie Blue
konsti
Richard Höchenberger
Charlie Marsh
Rajko Radovanović
Daniel Gafni
Udi Oron
Daniel Bruckner
Alex Willmer
Li-Lun Lin
Skyler Hawthorne
Jo
Hristo Filaretov
Shantanu
Andrew Gallant
Owen Brooks
Simon Willison
Tim Chan
Nathan McDougall
Andrey Bozhko
tfsingh
Ahmed Ilyas
samypr100
bluss
Trevor Manz
Kemal Akkoyun
FishAlchemist
Seth Morton
adisbladis
Huang, Hong-Chang
You Jiacheng
kyoto7250
Mathieu Kniewallner
Aditya Pratap Singh
Janosh Riebesell
eth3lbert
Di-Is
T-256
ldacey
Delgan