In *some* places in our crates, `serde` (and `rkyv`) are optional
dependencies. I believe this was done out of reasons of "good sense,"
that is, it follows a Rust ecosystem pattern where serde integration
tends to be an opt-in crate feature. (And similarly for `rkyv`.)
However, ultimately, `uv` itself requires `serde` and `rkyv` to
function. Since our crates are strictly internal, there are limited
consumers for our crates without `serde` (and `rkyv`) enabled. I think
one possibility is that optional `serde` (and `rkyv`) integration means
that someone can do this:
cargo test -p pep440_rs
And this will run tests _without_ `serde` or `rkyv` enabled. That in
turn could lead to faster iteration time by reducing compile times. But,
I'm not sure this is worth supporting. The iterative compilation times
of
individual crates are probably fast enough in debug mode, even with
`serde` and `rkyv` enabled. Namely, `serde` and `rkyv` themselves
shouldn't need to be re-compiled in most cases. On `main`:
```
from-scratch: `cargo test -p pep440_rs --lib` 0.685
incremental: `cargo test -p pep440_rs --lib` 0.278s
from-scratch: `cargo test -p pep440_rs --features serde,rkyv --lib` 3.948s
incremental: `cargo test -p pep440_rs --features serde,rkyv --lib` 0.321s
```
So while a from-scratch build does take significantly longer, an
incremental build is about the same.
The benefit of doing this change is two-fold:
1. It brings out crates into alignment with "reality." In particular,
some crates were _implicitly_ relying on `serde` being enabled
without explicitly declaring it. This technically means that our
`Cargo.toml`s were wrong in some cases, but it is hard to observe it
because of feature unification in a Cargo workspace.
2. We no longer need to deal with the cognitive burden of writing
`#[cfg_attr(feature = "serde", ...)]` everywhere.
This PR principally adds a routine for converting a `Lock` to a
`Resolution`, where a `Resolution` is a map of package names pinned to
a specific version.
I'm not sure that a `Resolution` is ultimately what we want here (we
might need more stuff), but this was the quickest route I could find to
plug a `Lock` into our existing `uv pip install` infrastructure.
This commit also does a little refactoring of the `Lock` types. The
main thing is to permit extra state on some of the types (like a
`by_id` map on `Lock` for quick lookups of distributions) that aren't
included in the serialization format of a `Lock`. We achieve this
by defining separate `Wire` types that are automatically converted
to-and-from via `serde`.
Note that like with the lock file format types themselves, we leave a
few `todo!()` expressions around. The main idea is to get something
minimally working without spending too much effort here. (A fair bit
of refactoring will be required to generate a lock file, and it's
not clear how much this code will wind up needing to change anyway.)
In particular, we only handle the case of installing wheels from a
registry.
A demonstration of the full flow:
```
$ requirements.in
anyio
$ cargo run -p uv -- pip compile -p3.10 requirements.in --unstable-uv-lock-file
$ uv venv
$ cargo run -p uv -- pip install --unstable-uv-lock-file anyio -r requirements.in
Installed 5 packages in 7ms
+ anyio==4.3.0
+ exceptiongroup==1.2.1
+ idna==3.7
+ sniffio==1.3.1
+ typing-extensions==4.11.0
```
In order to install from a lock file, we start from the root and do a
breadth first traversal over its dependencies. We aren't yet filtering
on marker expressions (since they aren't in the lock file yet), but we
should be able to add that in the future. In so doing, the traversal
should select only the subset of distributions relevant for the current
platform.
Split out of #3266
The "selector" concept doesn't seem well enough defined as-is. For
example, `PythonVersion` belongs there but isn't present. Going for
smaller modules instead.
Split out of https://github.com/astral-sh/uv/pull/3266
If `UV_BOOTSTRAP_DIR` and `CARGO_MANIFEST_DIR` are both unset, we
currently panic. This isn't good once we start to use managed toolchains
in production. We'll need to change this more later once the toolchain
directory is more user-facing.
Moves all of `uv-toolchain` into `uv-interpreter`. We may split these
out in the future, but the refactoring I want to do for interpreter
discovery is easier if I don't have to deal with entanglement. Includes
some restructuring of `uv-interpreter`.
Part of #2386
Another split out from https://github.com/astral-sh/uv/pull/3263. This
abstracts the copy&pasted check whether an installed distribution
satisfies a requirement used by both plan.rs and site_packages.rs into a
shared module. It's less useful here than with the new requirement but
helps with reducing https://github.com/astral-sh/uv/pull/3263 diff size.
Previously, a noop `uv pip install` would only show "Audited {}
package(s)" but no details, not even with `-vv`. Now it debug logs which
requirements were met and it also debug logs which requirement was
missing to trigger the full routine, allowing it investigate caching
behaviour.
First `uv pip install -v jupyter`:
```
DEBUG At least one requirement is not satisfied: jupyter
```
Second `uv pip install -v jupyter`:
```
DEBUG Found a virtualenv named .venv at: /home/konsti/projects/uv-main/.venv
DEBUG Cached interpreter info for Python 3.12.1, skipping probing: .venv/bin/python
DEBUG Using Python 3.12.1 environment at .venv/bin/python
DEBUG Trying to lock if free: .venv/.lock
DEBUG Requirement satisfied: anyio
DEBUG Requirement satisfied: anyio>=3.1.0
DEBUG Requirement satisfied: argon2-cffi-bindings
DEBUG Requirement satisfied: argon2-cffi>=21.1
DEBUG Requirement satisfied: arrow>=0.15.0
DEBUG Requirement satisfied: asttokens>=2.1.0
DEBUG Requirement satisfied: async-lru>=1.0.0
DEBUG Requirement satisfied: attrs>=22.2.0
DEBUG Requirement satisfied: babel>=2.10
...
DEBUG Requirement satisfied: webencodings
DEBUG Requirement satisfied: webencodings>=0.4
DEBUG Requirement satisfied: websocket-client>=1.7
DEBUG Requirement satisfied: widgetsnbextension~=4.0.10
DEBUG All editables satisfied:
Audited 1 package in 12ms
```
This will clash with the `tool.uv.sources` PR, i'll rebase it on top.
## Summary
Hi! Added `UV_NO_BUILD_ISOLATION` as a boolean environment variable for
the `--no-build-isolation` command-line option.
Closes https://github.com/astral-sh/uv/issues/3309
## Test Plan
Added new test `respect_no_build_isolation_env_var` to check that the
behaviour is the same as if the ``--no-build-isolation``
command-line-option is set.
This is meant to be a base on which to build. There are some parts
which are implicitly incomplete and others which are explicitly
incomplete. The latter are indicated by TODO comments.
Here is a non-exhaustive list of incomplete things. In many cases, these
are incomplete simply because the data isn't present in a
`ResolutionGraph`. Future work will need to refactor our resolver so
that this data is correctly passed down.
* Not all wheels are included. Only the "selected" wheel for the current
distribution is included.
* Marker expressions are always absent.
* We don't emit hashes for certainly kinds of distributions (direct
URLs, git, and path).
* We don't capture git information from a dependency specification.
Right now, we just always emit "default branch."
There are perhaps also other changes we might want to make to the format
of a more cosmetic nature. Right now, all arrays are encoded using
whatever the `toml` crate decides to do. But we might want to exert more
control over this. For example, by using inline tables or squashing more
things into strings (like I did for `Source` and `Hash`). I think the
main trade-off here is that table arrays are somewhat difficult to read
(especially without indentation), where as squashing things down into a
more condensed format potentially makes future compatible additions
harder.
I also went pretty light on the documentation here than what I would
normally do. That's primarily because I think this code is going to
go through some evolution and I didn't want to spend too much time
documenting something that is likely to change.
Finally, here's an example of the lock file format in TOML for the
`anyio` dependency. I generated it with the following command:
```
cargo run -p uv -- pip compile -p3.10 ~/astral/tmp/reqs/anyio.in --unstable-uv-lock-file
```
And that writes out a `uv.lock` file:
```toml
version = 1
[[distribution]]
name = "anyio"
version = "4.3.0"
source = "registry+https://pypi.org/simple"
[[distribution.wheel]]
url = "2f20c40b45242c0b33774da0e2e34f/anyio-4.3.0-py3-none-any.whl"
hash = "sha256:048e05d0f6caeed70d731f3db756d35dcc1f35747c8c403364a8332c630441b8"
[[distribution.dependencies]]
name = "exceptiongroup"
version = "1.2.1"
source = "registry+https://pypi.org/simple"
[[distribution.dependencies]]
name = "idna"
version = "3.7"
source = "registry+https://pypi.org/simple"
[[distribution.dependencies]]
name = "sniffio"
version = "1.3.1"
source = "registry+https://pypi.org/simple"
[[distribution.dependencies]]
name = "typing-extensions"
version = "4.11.0"
source = "registry+https://pypi.org/simple"
[[distribution]]
name = "exceptiongroup"
version = "1.2.1"
source = "registry+https://pypi.org/simple"
[[distribution.wheel]]
url = "79fe92dd414cadab75055b0ae00b33/exceptiongroup-1.2.1-py3-none-any.whl"
hash = "sha256:5258b9ed329c5bbdd31a309f53cbfb0b155341807f6ff7606a1e801a891b29ad"
[[distribution]]
name = "idna"
version = "3.7"
source = "registry+https://pypi.org/simple"
[[distribution.wheel]]
url = "741d8c8280948df2ea0eda2c8b79e8/idna-3.7-py3-none-any.whl"
hash = "sha256:82fee1fc78add43492d3a1898bfa6d8a904cc97d8427f683ed8e798d07761aa0"
[[distribution]]
name = "sniffio"
version = "1.3.1"
source = "registry+https://pypi.org/simple"
[[distribution.wheel]]
url = "75a9c94214239abab1ea2cc8f38b40/sniffio-1.3.1-py3-none-any.whl"
hash = "sha256:2f6da418d1f1e0fddd844478f41680e794e6051915791a034ff65e5f100525a2"
[[distribution]]
name = "typing-extensions"
version = "4.11.0"
source = "registry+https://pypi.org/simple"
[[distribution.wheel]]
url = "936e2092671b43269810cd589ceaf5/typing_extensions-4.11.0-py3-none-any.whl"
hash = "sha256:c1f94d72897edaf4ce775bb7558d5b79d8126906a14ea5ed1635921406c0387a"
```
Resolves https://github.com/astral-sh/uv/issues/3313
## Summary
Add a new env variable `UV_LINK_MODE` as alias for the cli argument
--link-mode.
Updated the README env variables section.
## Test Plan
Tested manually using `UV_LINK_MODE=hardlink cargo run -p uv pip install
flask`.
When running
```
set UV_CACHE_DIR=%LOCALAPPDATA%\uv\cache-foo && uv venv venv
```
in windows CMD, the error would be just
```
error: The system cannot find the path specified. (os error 3)
```
The problem is that the first action in the cache dir is adding the tag,
and the `cachedir` crate is using `std::fs` instead of `fs_err`. I've
copied the two functions we use from the crate and changed the import
from `std::fs` to `fs_err`.
The new error is
```
error: failed to open file `C:\Users\Konstantin\AppData\Local\uv\cache-foo \CACHEDIR.TAG`
Caused by: The system cannot find the path specified. (os error 3)
```
which correctly explains the problem.
Closes#3280
## Summary
It seems like Azure might return a 401 when you request a package that
doesn't exist (even with valid credentials)? But I admittedly haven't
tested this. (We already skip 403, and this seems similar?)
Closes https://github.com/astral-sh/uv/issues/3291.
## Summary
This index strategy resolves every package to the latest possible
version across indexes. If a version is in multiple indexes, the first
available index is selected.
Implements #3137
This closely matches pip.
## Test Plan
Good question. I'm hesitant to use my certifi example here, since that
would inevitably break when torch removes this package. Please comment!
## Summary
The approach taken here is to model `--target` as an install scheme in
which all the directories are just subdirectories of the `--target`.
From there, everything else... just works? Like, upgrade, uninstalls,
editables, etc. all "just work".
Closes#1517.
## Summary
based on PEP 508 the `platform_machine` should be same as
`platform.machine()` output:
https://peps.python.org/pep-0508/#environment-markers
From my macOS M2
```python
In [1]: import platform
In [2]: platform.machine()
Out[2]: 'arm64'
```
I napari we also use `arm64` in requirements and it works as expected:
9fcf63e69a/pyproject.toml (L120)
## Test Plan
<!-- How was it tested? -->
I rebased https://github.com/astral-sh/uv/pull/2757 then realized that
we want to implement this for more than `uv venv`.
Closes https://github.com/astral-sh/uv/issues/2587
Closes https://github.com/astral-sh/uv/issues/2757
```
❯ cargo run -q -- pip install -p /Users/mz/bin/python3.7 anyio
warning: uv is only compatible with Python 3.8+, found Python 3.7.17.
Audited 1 package in 84ms
❯ cargo run -q -- venv -p /Users/mz/bin/python3.7
warning: uv is only compatible with Python 3.8+, found Python 3.7.17.
Using Python 3.7.17 interpreter at: /Users/mz/bin/python3.7
Creating virtualenv at: .venv
Activate with: source .venv/bin/activate
```
---------
Co-authored-by: Stevie Gayet <stegayet@users.noreply.github.com>
## Summary
Simplifies dependency errors of the form `you require package-a and you
require package-b` to `you require package-a and package-b`. Resolves
https://github.com/astral-sh/uv/issues/1009.
The only thing a `OnceMap` really needs to be able to do with the value
is to clone it. All extant uses benefited from having this done for them
by automatically wrapping values in an `Arc`. But this isn't necessarily
true for all things. For example, a value might have an `Arc` internally
to making cloning cheap in other contexts, and it doesn't make sense to
re-wrap it in an `Arc` just to use it with a `OnceMap`. Or
alternatively, cloning might just be cheap enough on its own that an
`Arc` isn't worth it.
Previously, this would use the "system" temporary directory.
Because we rename the resulting directory to its final destination,
and because renaming is implemented via hardlinking, and because
hardlinking doesn't work across mount points, and because /tmp is
commonly on a different mount point than where `uv` is checked out,
we "fix" this by putting the temporary directory somewhere close to
the final destination of the fetched artifact.
There are alternatives we might consider pursuing. For example,
if the `rename` fails, then we should probably do a recursive
directory copy. But this is a quick fix for now and it also
consistent with colocation of other temporary directories in `uv`.
The main downside of this change is that if a user does ^C while
`uv-dev fetch-python` is running, then there is no mechanism for
cleaning up temporary directories.
Andrew Gallant
Zanie Blue
konsti
Charlie Marsh
Ibraheem Ahmed
Tim de Jager
Alexander Gherm
Ahmed Ilyas
Yorick
Grzegorz Bokota