* Previously had uv python install, then uv sync --all-extras --dev
* If we are going to use sync for dev dependencies, then the install
step is unneccessary
<!--
Thank you for contributing to uv! To help us out with reviewing, please
consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title?
- Does this pull request include references to any relevant issues?
-->
## Summary
<!-- What's the purpose of the change? What does it do, and why? -->
## Test Plan
<!-- How was it tested? -->
<!--
Thank you for contributing to uv! To help us out with reviewing, please
consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title?
- Does this pull request include references to any relevant issues?
-->
## Summary
Add info about uv being available in Scoop.
## Test Plan
`uvx --with-requirements .\docs\requirements.txt mkdocs serve
--config-file mkdocs.public.yml` worked.
<!--
Thank you for contributing to uv! To help us out with reviewing, please
consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title?
- Does this pull request include references to any relevant issues?
-->
## Summary
Follow up to #8553
Clarifies that the `exclude-newer` setting must be a full timestamp and
not a date.
<!-- What's the purpose of the change? What does it do, and why? -->
## Test Plan
N/A
<!-- How was it tested? -->
## Summary
This follows Ruff's design exactly: you can provide a version specifier
(like `>=0.5`), and we'll enforce it at runtime.
Closes https://github.com/astral-sh/uv/issues/8605.
## Summary
Closes#7913 by adding an optional `--description` argument to `uv init`
that fills the description field in the pyproject.toml with the supplied
arg value.
Updated `uv init` docs to describe this new optional argument.
<!-- What's the purpose of the change? What does it do, and why? -->
## Test Plan
Added snapshot tests in `uv/crates/uv/tests/it/init.rs` to test this
functionality.
<!-- How was it tested? -->
---------
Co-authored-by: Charlie Marsh <charlie.r.marsh@gmail.com>
## Summary
`uv run --exact` will remove any unnecessary packages prior to running
the given command. (By default, `uv run` uses "inexact" semantics.)
Closes https://github.com/astral-sh/uv/issues/7838.
## Summary
This is yet another variation on
https://github.com/astral-sh/uv/pull/9928, with a few minor changes:
1. It only applies to local versions (e.g., `2.5.1+cpu`).
2. It only _considers_ the non-local version as an alternative (e.g.,
`2.5.1`).
3. It only _considers_ the non-local alternative if it _does_ support
the unsupported platform.
4. Instead of failing, it falls back to using the local version.
So, this is far less strict, and is effectively designed to solve
PyTorch but nothing else. It's also not user-configurable, except by way
of using `environments` to exclude platforms.
Build failures are one of the most common user facing failures that
aren't "obivous" errors (such as typos) or resolver errors. Currently,
they show more technical details than being focussed on this being an
error in a subprocess that is either on the side of the package or -
more likely - in the build environment, e.g. the user needs to install a
dev package or their python version is incompatible.
The new error message clearly delineates the part that's important (this
is a build backend problem) from the internals (we called this hook) and
is consistent about which part of the dist building stage failed. We
have to calibrate the exact wording of the error message some more. Most
of the implementation is working around the orphan rule, (this)error
rules and trait rules, so it came out more of a refactoring than
intended.
Example:
## Summary
Documentation steps resulted in errors due to single quotes when adding
project dependencies:
``` shell
>uv add 'httpx>0.1.0'
error: Failed to parse: `'httpx`
Caused by: Expected package name starting with an alphanumeric character, found `'`
'httpx
^
```
``` shell
>uv add 'PyQt5; sys_platform == "windows"
error: Failed to parse: `'PyQt5;`
Caused by: Expected package name starting with an alphanumeric character, found `'`
'PyQt5;
^
```
## Testing Steps
- Follow new documentation steps
Tested on:
- [x] Windows
<!--
Thank you for contributing to uv! To help us out with reviewing, please
consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title?
- Does this pull request include references to any relevant issues?
-->
## Summary
<!-- What's the purpose of the change? What does it do, and why? -->
## Test Plan
<!-- How was it tested? -->
---------
Co-authored-by: Jonne <jonne.haapalainen@gmail.com>
<!--
Thank you for contributing to uv! To help us out with reviewing, please
consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title?
- Does this pull request include references to any relevant issues?
-->
## Summary
Existing documentation on how to apply a matrix strategy over the python
version in a github workflow is incomplete and possibly misleading. This
PR deletes the existing section and creates a new one to reflect current
best practice. See https://github.com/astral-sh/uv/issues/9376.
## Test Plan
N/A, only docs.
---------
Co-authored-by: Zanie Blue <contact@zanie.dev>
See https://github.com/astral-sh/uv/issues/9871
> The current instructions first mention removing the binaries, and then
mention a suggestion for removing stored data. The recommended data
removal process involves uv commands that will no longer be available if
the binaries are gone 😄.
I've edited the uninstallation docs to first suggest removing stored
data before removing the uv and uvx binaries.
<img
src="https://github.com/user-attachments/assets/526fcdb3-4fd2-4e04-b895-810cb826aa11"
width="600"/>
<!--
Thank you for contributing to uv! To help us out with reviewing, please
consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title?
- Does this pull request include references to any relevant issues?
-->
## Summary
The `fork-strategy` default value was overlooked in #9887.
---------
Co-authored-by: Charlie Marsh <charlie.r.marsh@gmail.com>
Just a small note to say that dependencies between workspace members are
editable as shown in #9362
(This might be obvious since if dependencies between workspaces members
are not editable then every time a workspace member is update it has to
be manually reinstalled but since it's in the concepts documentation and
since I see a lot of issues about workspaces, that little note might
help newcomers a little bit)
Background reading: https://github.com/astral-sh/uv/issues/8157
Companion PR: https://github.com/astral-sh/pubgrub/pull/36
Requires for test coverage: https://github.com/astral-sh/packse/pull/230
When two packages A and B conflict, we have the option to choose a lower
version of A, or a lower version of B. Currently, we determine this by
the order we saw a package (assuming equal specificity of the
requirement): If we saw A before B, we pin A until all versions of B are
exhausted. This can lead to undesirable outcomes, from cases where it's
just slow (sentry) to others cases without lower bounds where be
backtrack to a very old version of B. This old version may fail to build
(terminating the resolution), or it's a version so old that it doesn't
depend on A (or the shared conflicting package) anymore - but also is
too old for the user's application (fastapi). #8157 collects such cases,
and the `wrong-backtracking` packse scenario contains a minimized
example.
We try to solve this by tracking which packages are "A"s, culprits, and
"B"s, affected, and manually interfering with project selection and
backtracking. Whenever a version we just chose is rejected, we give the
current package a counter for being affected, and the package it
conflicted with a counter for being a culprit. If a package accumulates
more counts than a threshold, we reprioritize: Undecided after the
culprits, after the affected, after packages that only have a single
version (URLs, `==<version>`). We then ask pubgrub to backtrack just
before the culprit. Due to the changed priorities, we now select package
B, the affected, instead of package A, the culprit.
To do this efficiently, we ask pubgrub for the incompatibility that
caused backtracking, or just the last version to be discarded (due to
its dependencies). For backtracking, we use the last incompatibility
from unit propagation as a heuristic. When a version is discarded
because one of its dependencies conflicts with the partial solution, the
incompatibility tells us the package in the partial solution that
conflicted.
We only backtrack once per package, on the first time it passes the
threshold. This prevents backtracking loops in which we make the same
decisions over and over again. But we also changed the priority, so that
we shouldn't take the same path even after the one time we backtrack (it
would defeat the purpose of this change).
There are some parameters that can be tweaked: Currently, the threshold
is set to 5, which feels not too eager with so me of the conflicts that
we want to tolerate but also changes strategies quickly. The relative
order of the new priorities can also be changed, as for each (A, B) pair
the priority of B is afterwards lower than that for A. Currently,
culprits capture conflict for the whole package, but we could limit that
to a specific version. We could discard conflict counters after
backtracking instead of keeping them eternally as we do now. Note that
we're always taking about pairs (A, B), but in practice we track
individual packages, not pairs.
A case that we wouldn't capture is when B is only introduced to the
dependency graph after A, but I think that would require cyclical
dependency for A and B to conflict? There may also be cases where
looking at the last incompatibility is insufficient.
Another example that we can't repair with prioritization is
urllib3/boto3/botocore: We actually have to check all the newer versions
of boto3 and botocore to identify the version that allows with the older
urllib3, no shortcuts allowed.
```
urllib3<1.25.4
boto3
```
All examples I tested were cases with two packages where we only had to
switch the order, so I've abstracted them into a single packse case.
This PR changes the resolution for certain paths, and there is the risk
for regressions.
Fixes#8157
---
All tested examples improved.
Input fastapi:
```text
starlette<=0.36.0
fastapi<=0.115.2
```
```
# BEFORE
$ uv pip --no-progress compile -p 3.11 --exclude-newer 2024-10-01 --no-annotate debug/fastapi.txt
annotated-types==0.7.0
anyio==4.6.0
fastapi==0.1.17
idna==3.10
pydantic==2.9.2
pydantic-core==2.23.4
sniffio==1.3.1
starlette==0.36.0
typing-extensions==4.12.2
# AFTER
$ cargo run --profile fast-build --no-default-features pip compile -p 3.11 --no-progress --exclude-newer 2024-10-01 --no-annotate debug/fastapi.txt
annotated-types==0.7.0
anyio==4.6.0
fastapi==0.109.1
idna==3.10
pydantic==2.9.2
pydantic-core==2.23.4
sniffio==1.3.1
starlette==0.35.1
typing-extensions==4.12.2
```
Input xarray:
```text
xarray[accel]
```
```
# BEFORE
$ uv pip --no-progress compile -p 3.11 --exclude-newer 2024-10-01 --no-annotate debug/xarray-accel.txt
bottleneck==1.4.0
flox==0.9.13
llvmlite==0.36.0
numba==0.53.1
numbagg==0.8.2
numpy==2.1.1
numpy-groupies==0.11.2
opt-einsum==3.4.0
packaging==24.1
pandas==2.2.3
python-dateutil==2.9.0.post0
pytz==2024.2
scipy==1.14.1
setuptools==75.1.0
six==1.16.0
toolz==0.12.1
tzdata==2024.2
xarray==2024.9.0
# AFTER
$ cargo run --profile fast-build --no-default-features pip compile -p 3.11 --no-progress --exclude-newer 2024-10-01 --no-annotate debug/xarray-accel.txt
bottleneck==1.4.0
flox==0.9.13
llvmlite==0.43.0
numba==0.60.0
numbagg==0.8.2
numpy==2.0.2
numpy-groupies==0.11.2
opt-einsum==3.4.0
packaging==24.1
pandas==2.2.3
python-dateutil==2.9.0.post0
pytz==2024.2
scipy==1.14.1
six==1.16.0
toolz==0.12.1
tzdata==2024.2
xarray==2024.9.0
```
Input sentry: The resolution is identical, but arrived at much faster:
main tries 69 versions (sentry-kafka-schemas: 63), PR tries 12 versions
(sentry-kafka-schemas: 6; 5 times conflicting, then once the right
version).
```text
python-rapidjson<=1.20,>=1.4
sentry-kafka-schemas<=0.1.113,>=0.1.50
```
```
# BEFORE
$ uv pip --no-progress compile -p 3.11 --exclude-newer 2024-10-01 --no-annotate debug/sentry.txt
fastjsonschema==2.20.0
msgpack==1.1.0
python-rapidjson==1.8
pyyaml==6.0.2
sentry-kafka-schemas==0.1.111
typing-extensions==4.12.2
# AFTER
$ cargo run --profile fast-build --no-default-features pip compile -p 3.11 --no-progress --exclude-newer 2024-10-01 --no-annotate debug/sentry.txt
fastjsonschema==2.20.0
msgpack==1.1.0
python-rapidjson==1.8
pyyaml==6.0.2
sentry-kafka-schemas==0.1.111
typing-extensions==4.12.2
```
Input apache-beam
```text
# Run on Python 3.10
dill<0.3.9,>=0.2.2
apache-beam<=2.49.0
```
```
# BEFORE
$ uv pip --no-progress compile -p 3.10 --exclude-newer 2024-10-01 --no-annotate debug/apache-beam.txt
× Failed to download and build `apache-beam==2.0.0`
╰─▶ Build backend failed to determine requirements with `build_wheel()` (exit status: 1)
# AFTER
$ cargo run --profile fast-build --no-default-features pip compile -p 3.10 --no-progress --exclude-newer 2024-10-01 --no-annotate debug/apache-beam.txt
apache-beam==2.49.0
certifi==2024.8.30
charset-normalizer==3.3.2
cloudpickle==2.2.1
crcmod==1.7
dill==0.3.1.1
dnspython==2.6.1
docopt==0.6.2
fastavro==1.9.7
fasteners==0.19
grpcio==1.66.2
hdfs==2.7.3
httplib2==0.22.0
idna==3.10
numpy==1.24.4
objsize==0.6.1
orjson==3.10.7
proto-plus==1.24.0
protobuf==4.23.4
pyarrow==11.0.0
pydot==1.4.2
pymongo==4.10.0
pyparsing==3.1.4
python-dateutil==2.9.0.post0
pytz==2024.2
regex==2024.9.11
requests==2.32.3
six==1.16.0
typing-extensions==4.12.2
urllib3==2.2.3
zstandard==0.23.0
```
<!--
Thank you for contributing to uv! To help us out with reviewing, please
consider the following:
- Does this pull request include a summary of the change? (See below.)
- Does this pull request include a descriptive title?
- Does this pull request include references to any relevant issues?
-->
## Summary
When going through the docs at
https://docs.astral.sh/uv/guides/install-python/#automatic-python-downloads,
when you try to copy and paste the example on Windows, in either
PowerShell or cmd.exe the example won't work.
Inverting the quotes fixes it, and still works on other shells (I only
tried bash under wsl)
## Test Plan
On any windows system, from powershell, running the example yields the
following error:
```
> uv run --python 3.12 python -c 'print("hello world")'
File "<string>", line 1
print(hello world)
^^^^^^^^^^^
SyntaxError: invalid syntax. Perhaps you forgot a comma?
```
on cmd.exe
```
> uv run --python 3.12 python -c 'print("hello world")'
```
(there is no output)
Inverting the quotes on powershell
```
> uv run --python 3.12 python -c "print('hello world')"
hello world
```
on cmd.exe
```
> uv run --python 3.12 python -c "print('hello world')"
hello world
```
<!-- How was it tested? -->
## Summary
This PR makes the behavior in https://github.com/astral-sh/uv/pull/9827
the default: we try to select the latest supported package version for
each supported Python version, but we still optimize for choosing fewer
versions when stratifying by platform.
However, you can opt out with `--fork-strategy fewest`.
Closes https://github.com/astral-sh/uv/issues/7190.
When publishing, we currently ask the user to set `--publish-url` to the
upload URL and `--check-url` to the simple index URL, or the equivalent
configuration keys. But that's redundant with the `[[tool.uv.index]]`
declaration. Instead, we extend `[[tool.uv.index]]` with a `publish-url`
entry and allow passing `uv publish --index <name>`.
`uv publish --index <name>` requires the `pyproject.toml` to be present
when publishing, unlike using `--publish-url ... --check-url ...` which
can be used e.g. in CI without a checkout step. `--index` also always
uses the check URL feature to aid upload consistency.
The documentation tries to explain both approaches together, which
overlap for the check URL feature.
Fixes#8864
---------
Co-authored-by: Zanie Blue <contact@zanie.dev>
Addresses #6805
## Summary
This PR adds a `--gui-script` flag to `uv run` that allows running
Python scripts with `pythonw.exe` on Windows, regardless of file
extension. This solves the issue where users need to maintain duplicate
`.py` and `.pyw` files to run the same script with and without a console
window.
The implementation follows the pattern established by the existing
`--script` flag, but uses `pythonw.exe` instead of `python.exe` on
Windows. On non-Windows platforms, the flag is present but returns an
error indicating it's Windows-only functionality.
Changes:
- Added `--gui-script` flag (Windows-only)
- Added Windows test to verify GUI script behavior
- Added non-Windows test to verify proper error message
- Updated CLI documentation
## Test Plan
The changes are tested through:
1. New Windows-specific test that verifies:
- Script runs successfully with `pythonw.exe` when using `--gui-script`
- Console output is suppressed in GUI mode but visible in regular mode
- Same script can be run both ways without modification
2. New non-Windows test that verifies:
- Appropriate error message when `--gui-script` is used on non-Windows
platforms
3. Documentation updates to clearly indicate Windows-only functionality
---------
Co-authored-by: Zanie Blue <contact@zanie.dev>
Kevin Marchais
csteiner
Zanie Blue
Olav Rønnestad Birkeland
Charlie Marsh
Trevor Manz
vladislav doster
Savannah Ostrowski
Arnav Gupta
Mathieu Kniewallner
renovate[bot]
Steven L.
FishAlchemist
konsti
Matthew Lee
Udi Oron
Zach Kurtz
my1e5
Richard Höchenberger
ReinforcedKnowledge
Jim Kutter
Rajko Radovanović