## Summary
There's a good example of the downside of using verbatim URLs here:
https://github.com/astral-sh/uv/pull/14197#discussion_r2163599625 (we
show two relative paths that point to the same directory, but it's not
clear from the error message).
The diff:
```
2 2 │ ----- stdout -----
3 3 │
4 4 │ ----- stderr -----
5 5 │ error: Requirements contain conflicting URLs for package `library` in all marker environments:
6 │-- ../../library
7 │-- ./library
6 │+- file://[TEMP_DIR]/library
7 │+- file://[TEMP_DIR]/library (editable)
```
This updates the surrounding code to use the new ResolverEnvironment
type. In some cases, this simplifies caller code by removing case
analysis. There *shouldn't* be any behavior changes here. Some test
snapshots were updated to account for some minor tweaks to error
messages.
I didn't split this up into separate commits because it would have been
too difficult/costly.
## Summary
This PR lifts the restriction that a package must come from a single
index. For example, you can now do:
```toml
[project]
name = "project"
version = "0.1.0"
readme = "README.md"
requires-python = ">=3.12"
dependencies = ["jinja2"]
[tool.uv.sources]
jinja2 = [
{ index = "torch-cu118", marker = "sys_platform == 'darwin'"},
{ index = "torch-cu124", marker = "sys_platform != 'darwin'"},
]
[[tool.uv.index]]
name = "torch-cu118"
url = "https://download.pytorch.org/whl/cu118"
[[tool.uv.index]]
name = "torch-cu124"
url = "https://download.pytorch.org/whl/cu124"
```
The construction is very similar to the way we handle URLs today: you
can have multiple URLs for a given package, but they must appear in
disjoint forks. So most of the code is just adding that abstraction to
the resolver, following our handling of URLs.
Closes#7761.
* Use a dedicated `ResolverMarkers` check in the fork state. This is
better than the `MarkerTree::And(Vec::new())` check.
* Report the timing correct naming universal resolution instead of two
spaces around an empty string when there are no markers.
* On resolution error, show the split that we're in. I'm not sure how to
word this, since we're doing a universal resolution until we fork, so
the trace may contain information from requirements that are not part of
this fork.
Downstack PR: #4481
## Introduction
We support forking the dependency resolution to support conflicting
registry requirements for different platforms, say on package range is
required for an older python version while a newer is required for newer
python versions, or dependencies that are different per platform. We
need to extend this support to direct URL requirements.
```toml
dependencies = [
"iniconfig @ 62565a6e1ceac6173dc9db836a5b46/iniconfig-2.0.0-py3-none-any.whl ; python_version >= '3.12'",
"iniconfig @ b3c12c6d70988d7baea9578f3c48f3/iniconfig-1.1.1-py2.py3-none-any.whl ; python_version < '3.12'"
]
```
This did not work because `Urls` was built on the assumption that there
is a single allowed URL per package. We collect all allowed URL ahead of
resolution by following direct URL dependencies (including path
dependencies) transitively, i.e. a registry distribution can't require a
URL.
## The same package can have Registry and URL requirements
Consider the following two cases:
requirements.in:
```text
werkzeug==2.0.0
werkzeug @ 960bb4017c4aed12b5ed8b78e0153e/Werkzeug-2.0.0-py3-none-any.whl
```
pyproject.toml:
```toml
dependencies = [
"iniconfig == 1.1.1 ; python_version < '3.12'",
"iniconfig @ git+https://github.com/pytest-dev/iniconfig@93f5930e668c0d1ddf4597e38dd0dea4e2665e7a ; python_version >= '3.12'",
]
```
In the first case, we want the URL to override the registry dependency,
in the second case we want to fork and have one branch use the registry
and the other the URL. We have to know about this in
`PubGrubRequirement::from_registry_requirement`, but we only fork after
the current method.
Consider the following case too:
a:
```
c==1.0.0
b @ https://b.zip
```
b:
```
c @ https://c_new.zip ; python_version >= '3.12'",
c @ https://c_old.zip ; python_version < '3.12'",
```
When we convert the requirements of `a`, we can't know the url of `c`
yet. The solution is to remove the `Url` from `PubGrubPackage`: The
`Url` is redundant with `PackageName`, there can be only one url per
package name per fork. We now do the following: We track the urls from
requirements in `PubGrubDependency`. After forking, we call
`add_package_version_dependencies` where we apply override URLs, check
if the URL is allowed and check if the url is unique in this fork. When
we request a distribution, we ask the fork urls for the real URL. Since
we prioritize url dependencies over registry dependencies and skip
packages with `Urls` entries in pre-visiting, we know that when fetching
a package, we know if it has a url or not.
## URL conflicts
pyproject.toml (invalid):
```toml
dependencies = [
"iniconfig @ e96292c7f723f1fa332fe4ed6dfbec/iniconfig-1.1.0.tar.gz",
"iniconfig @ b3c12c6d70988d7baea9578f3c48f3/iniconfig-1.1.1-py2.py3-none-any.whl ; python_version < '3.12'",
"iniconfig @ 62565a6e1ceac6173dc9db836a5b46/iniconfig-2.0.0-py3-none-any.whl ; python_version >= '3.12'",
]
```
On the fork state, we keep `ForkUrls` that check for conflicts after
forking, rejecting the third case because we added two packages of the
same name with different URLs.
We need to flatten out the requirements before transformation into
pubgrub requirements to get the full list of other requirements which
may contain a URL, which was changed in a previous PR: #4430.
## Complex Example
a:
```toml
dependencies = [
# Force a split
"anyio==4.3.0 ; python_version >= '3.12'",
"anyio==4.2.0 ; python_version < '3.12'",
# Include URLs transitively
"b"
]
```
b:
```toml
dependencies = [
# Only one is used in each split.
"b1 ; python_version < '3.12'",
"b2 ; python_version >= '3.12'",
"b3 ; python_version >= '3.12'",
]
```
b1:
```toml
dependencies = [
"iniconfig @ b3c12c6d70988d7baea9578f3c48f3/iniconfig-1.1.1-py2.py3-none-any.whl",
]
```
b2:
```toml
dependencies = [
"iniconfig @ 62565a6e1ceac6173dc9db836a5b46/iniconfig-2.0.0-py3-none-any.whl",
]
```
b3:
```toml
dependencies = [
"iniconfig @ e96292c7f723f1fa332fe4ed6dfbec/iniconfig-1.1.0.tar.gz",
]
```
In this example, all packages are url requirements (directory
requirements) and the root package is `a`. We first split on `a`, `b`
being in each split. In the first fork, we reach `b1`, the fork URLs are
empty, we insert the iniconfig 1.1.1 URL, and then we skip over `b2` and
`b3` since the mark is disjoint with the fork markers. In the second
fork, we skip over `b1`, visit `b2`, insert the iniconfig 2.0.0 URL into
the again empty fork URLs, then visit `b3` and try to insert the
iniconfig 1.1.0 URL. At this point we find a conflict for the iniconfig
URL and error.
## Closing
The git tests are slow, but they make the best example for different URL
types i could find.
Part of #3927. This PR does not handle `Locals` or pre-releases yet.
Charlie Marsh
Andrew Gallant
konsti