mirror of
https://github.com/Druthulu/BFM-decomp
synced 2026-09-27 22:45:39 -04:00
Drew T
50dd6b3c3f
Wave 3 (wf_2680d8ff-539, 74 agents, 8.08M tok): 39 targets -> 35 agent-MATCH, 0 refuted, 4 NEAR, 0 FAIL -> 27 BANKED on the whole-binary gate (69%). THE HARDENED HARNESS HELD: 0 drafts missing on disk (wave 2 lost 21 of 26 to a shared output dir). Per-agent dirs + "never touch anything outside your own directory" + a verifier that re-runs sha1sum LAST. PRIOR-NOTES SEEDING IS THE SESSION'S BEST LEVER: 7 of 9 seeded targets converted, including all three wave-2 whole-binary-gate misses and both big NEARs — func_80189540 (551 ins, was NEAR +2) and func_8017C3BC (407 ins, was NEAR 17). func_8017C294 (the x16 family) went 18 -> 11 ins: narrowing, not a wall. func_80189540 also required the one host edit its agent byte-probed: src/ov_SC04_018/ov_SC04_018_jr_80188E1C.c:3093 extern s32 func_80189540(s32 a0, s16 a1) -> (s16 a0, s16 a1) That TU has no call site, so the edit is inert; the OTHER TUs' (s32,s16) decls are deliberately left alone (real call sites, and an s16 prototype there would force caller-side truncation and could de-match banked callers). Its agent also recovered a better draft that already existed at .run/backlog_drafts/func_80189540.c — a 551-ins MATCH that had been DE-matched to 549 by "fixing" the definition's s16 first parameter to s32, the exact inverse of that draft's own warning. Restoring s16 recovered the match.
178 lines
10 KiB
YAML
178 lines
10 KiB
YAML
# splat config TEMPLATE — Brave Fencer Musashi location overlays (SCxx.CD/FILE_nnn/0.4.dec)
|
|
# =============================================================================
|
|
# Phase 13: the reusable flat-blob splat config for a LOCATION OVERLAY. ~134 overlays
|
|
# all stream into the SAME RAM slot (vram 0x80128158) and chain into the resident engine
|
|
# (0x800CEDF8) + the EXE. This is a TEMPLATE: the @TOKEN@ placeholders are substituted to
|
|
# produce config/splat.<alias>.yaml — by tools/new_overlay.sh (Phase 13 T4), or by hand
|
|
# (Phase 13 T1a for the first overlay). It is NOT a valid splat config until instantiated.
|
|
#
|
|
# Placeholders:
|
|
# ov_SC01_005 binary alias, ov_<SCxx>_<nnn> e.g. ov_SC01_077
|
|
# extracted/retail/SC01.CD.dir/FILE_005.dir/0.4.dec extracted 0.4.dec payload path e.g. extracted/retail/SC01.CD.dir/FILE_077.dir/0.4.dec
|
|
# 56760dbec7757f12d18d7e40242a0b05280ff444 sha1 of the 0.4.dec (the build-identity target; also -> config/check.<alias>.sha)
|
|
# 0x80128158 load vram (the shared overlay slot) e.g. 0x80128158 (constant across overlays today;
|
|
# parameterized so a future non-0x80128158 overlay needs no template edit)
|
|
# 0x5A20C file offset where code ends -> data tail begins (iterated vs the byte check, T1b)
|
|
# 0xA5F09 file size in bytes (the EOF marker; = the 0.4.dec length)
|
|
#
|
|
# Modeled on config/splat.resident.yaml (the Phase-10 flat-blob recipe), with overlays'
|
|
# differences: (1) code at file offset 0x0 (overlays open with a function prologue, NOT a
|
|
# leading data word like the resident — so NO leading-rodata trick by default; see the
|
|
# commented `head` slot for the rare pre-code-data overlay); (2) symbol_addrs_path ALSO
|
|
# stacks config/symbols.resident.txt because overlays reference resident engine globals;
|
|
# (3) vram is the overlay slot. Everything else matches the resident options verbatim.
|
|
#
|
|
# Byte-match is robust to the exact text/data split (splat round-trips the bytes — the
|
|
# resident precedent); iterate 0x5A20C against `make check BINARY=ov_SC01_005` (Phase-5/10
|
|
# precedent). LZSS is NOT in the verify path — we match the DECOMPRESSED 0.4.dec (repack is Gen3).
|
|
name: ov_SC01_005
|
|
sha1: 56760dbec7757f12d18d7e40242a0b05280ff444
|
|
options:
|
|
basename: ov_SC01_005
|
|
target_path: extracted/retail/SC01.CD.dir/FILE_005.dir/0.4.dec
|
|
elf_path: build/ov_SC01_005/ov_SC01_005.elf
|
|
# base_path is resolved relative to THIS yaml's dir (config/), so `..` = repo root
|
|
base_path: ..
|
|
platform: psx
|
|
compiler: PSYQ
|
|
|
|
asm_path: asm/ov_SC01_005
|
|
src_path: src/ov_SC01_005
|
|
# asset_path scoped per-alias so a `bin` subseg (the trailing-partial-word carve, below) lands at
|
|
# assets/ov_SC01_005/*.bin and never collides with another overlay's same-named asset. The Makefile's
|
|
# build/assets/%.o rule incbin's it into a linkable object.
|
|
asset_path: assets/ov_SC01_005
|
|
# build_path = build (NOT build/<alias>): splat writes the .ld's object paths under
|
|
# $(build_path), and the Makefile's pattern rules build them at build/asm/** + build/src/**.
|
|
# Only the elf/ld/output live in build/<alias>/.
|
|
build_path: build
|
|
ld_script_path: build/ov_SC01_005/ov_SC01_005.ld
|
|
ld_dependencies: True
|
|
|
|
# Per-binary undefined-symbol outputs (under build/<alias>/), so `make clean`'s `rm -rf build`
|
|
# covers them and binaries never share a stale file.
|
|
undefined_syms_auto_path: build/ov_SC01_005/undefined_syms_auto.txt
|
|
undefined_funcs_auto_path: build/ov_SC01_005/undefined_funcs_auto.txt
|
|
|
|
find_file_boundaries: False
|
|
# NO gp_value: overlays are -G0 (verify zero ($gp)/%gp_rel in the disasm). Omitting it -> no _gp.
|
|
|
|
o_as_suffix: True
|
|
use_legacy_include_asm: False
|
|
|
|
section_order: [".rodata", ".text", ".data", ".bss"]
|
|
|
|
# Stacked symbols: shared engine globals (symbols.us.txt) + resident engine globals the overlay
|
|
# calls (symbols.resident.txt) + the overlay-local names/boundaries (symbols.<alias>.txt, seeded
|
|
# T1c from sig_image + duplicates.cross.md; R13/R15-tagged, overlay-region only).
|
|
symbol_addrs_path:
|
|
- config/symbols.us.txt
|
|
- config/symbols.resident.txt
|
|
- config/symbols.ov_SC01_005.txt
|
|
|
|
subalign: 2
|
|
|
|
string_encoding: ASCII
|
|
data_string_encoding: ASCII
|
|
rodata_string_guesser_level: 2
|
|
data_string_guesser_level: 2
|
|
|
|
# Enable if maspsx reorders INCLUDE_ASM output in c-mode (unused for the EXE/resident):
|
|
# include_asm_macro_style: maspsx_hack
|
|
|
|
segments:
|
|
- name: ov_SC01_005
|
|
type: code
|
|
start: 0x0
|
|
vram: 0x80128158
|
|
# align 4 (not the code default 16): MIPS is word-aligned; mirrors the EXE/resident choice.
|
|
align: 4
|
|
subsegments:
|
|
# OPTIONAL leading pre-code data/rodata island (rare): if an overlay begins with a data
|
|
# word BEFORE its first function (the resident's case), uncomment a `head` subseg here and
|
|
# shift the code start. Mark it `rodata` (section_order places .rodata first) so it lands at
|
|
# 0x80128158 ahead of the code, a 1-word analogue of main's rodata-island (no ld_interleave).
|
|
# - [0x0, rodata, head]
|
|
- [0x0, c, ov_SC01_005]
|
|
- [0x2b88, c, ov_SC01_005_jr_8012ACE0]
|
|
- [0xd730, c, ov_SC01_005_jr_80135888]
|
|
- [0xd8f4, c, ov_SC01_005_jr_80135A4C]
|
|
- [0xdbc8, c, ov_SC01_005_jr_80135D20]
|
|
- [0xff88, c, ov_SC01_005_jr_801380E0]
|
|
- [0x13410, c, ov_SC01_005_o0c]
|
|
- [0x14834, c, ov_SC01_005_jr_8013C98C]
|
|
- [0x171f8, c, ov_SC01_005_jr_8013F350]
|
|
- [0x17e80, c, ov_SC01_005_jr_8013FFD8]
|
|
- [0x184b0, c, ov_SC01_005_jr_80140608]
|
|
- [0x1CA44, c, ov_SC01_005_o0b] # -O0 whale func_80144B9C (0x1CA44..0x1D64C)
|
|
- [0x1d64c, c, ov_SC01_005_after]
|
|
- [0x2c2f4, c, ov_SC01_005_jr_8015444C]
|
|
- [0x2cacc, c, ov_SC01_005_jr_80154C24]
|
|
- [0x30774, c, ov_SC01_005_jr_801588CC]
|
|
- [0x31b2c, c, ov_SC01_005_jr_80159C84]
|
|
- [0x32270, c, ov_SC01_005_jr_8015A3C8]
|
|
- [0x32cd4, c, ov_SC01_005_jr_8015AE2C]
|
|
- [0x341d4, c, ov_SC01_005_jr_8015C32C]
|
|
- [0x42a14, c, ov_SC01_005_jr_8016AB6C]
|
|
- [0x499f4, c, ov_SC01_005_jr_80171B4C]
|
|
- [0x4b364, c, ov_SC01_005_jr_801734BC]
|
|
- [0x50854, c, ov_SC01_005_jr_801789AC]
|
|
- [0x50be8, c, ov_SC01_005_jr_80178D40]
|
|
- [0x52354, c, ov_SC01_005_jr_8017A4AC]
|
|
- [0x52cd4, c, ov_SC01_005_jr_8017AE2C]
|
|
- [0x541e8, c, ov_SC01_005_jr_8017C340]
|
|
- [0x569ec, c, ov_SC01_005_jr_8017EB44]
|
|
- [0x56c04, c, ov_SC01_005_jr_8017ED5C]
|
|
- [0x5a20c, data, tail]
|
|
- [0xa2d00, .rodata, ov_SC01_005] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa2ddc, .rodata, ov_SC01_005_jr_8012ACE0] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa2ed0, data, tail2]
|
|
- [0xa2ed4, .rodata, ov_SC01_005_jr_80135888] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa2ee8, data, tail3]
|
|
- [0xa2eec, .rodata, ov_SC01_005_jr_80135A4C] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa2f00, data, tail4]
|
|
- [0xa2f04, .rodata, ov_SC01_005_jr_80135D20] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa2f48, data, tail5]
|
|
- [0xa2f54, .rodata, ov_SC01_005_jr_801380E0] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa2fb8, .rodata, ov_SC01_005_o0c] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa313c, data, tail6]
|
|
- [0xa35c4, .rodata, ov_SC01_005_jr_8013F350] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa35f8, data, tail7]
|
|
- [0xa35fc, .rodata, ov_SC01_005_jr_8013FFD8] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa3668, data, tail8]
|
|
- [0xa366c, .rodata, ov_SC01_005_jr_80140608] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa3680, data, tail9]
|
|
- [0xa3698, .rodata, ov_SC01_005_jr_8015444C] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa3774, .rodata, ov_SC01_005_jr_80154C24] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa37b8, .rodata, ov_SC01_005_jr_801588CC] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa3860, .rodata, ov_SC01_005_jr_80159C84] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa3894, data, tail10]
|
|
- [0xa3898, .rodata, ov_SC01_005_jr_8015A3C8] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa38b4, data, tail11]
|
|
- [0xa38b8, .rodata, ov_SC01_005_jr_8015AE2C] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa38f4, data, tail12]
|
|
- [0xa38f8, .rodata, ov_SC01_005_jr_8015C32C] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa3914, data, tail13]
|
|
- [0xa392c, .rodata, ov_SC01_005_jr_8016AB6C] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa396c, data, tail14]
|
|
- [0xa39ac, .rodata, ov_SC01_005_jr_80171B4C] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa39cc, .rodata, ov_SC01_005_jr_801734BC] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa39e0, data, tail15]
|
|
- [0xa3b70, .rodata, ov_SC01_005_jr_801789AC] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa3b88, .rodata, ov_SC01_005_jr_80178D40] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa3d8c, data, tail16]
|
|
- [0xa3d90, .rodata, ov_SC01_005_jr_8017A4AC] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa3e1c, data, tail17]
|
|
- [0xa3e20, .rodata, ov_SC01_005_jr_8017AE2C] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa3e34, .rodata, ov_SC01_005_jr_8017C340] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa3e54, data, tail18]
|
|
- [0xa435c, .rodata, ov_SC01_005_jr_8017EB44] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa4384, .rodata, ov_SC01_005_jr_8017ED5C] # Phase-26 §8 jtbl-rodata carve (jtbl_carve.py)
|
|
- [0xa43ac, data, tail19]
|
|
- [0xA5F08, bin, trailing] # final 1 bytes (EOF not 4-aligned; spimdisasm drops a partial word)
|
|
- [0xA5F09] # EOF marker = the 0.4.dec byte length
|
|
# @TRAILING@ (above) is replaced by tools/new_overlay.sh: for a non-4-aligned overlay it becomes
|
|
# ` - [0x<word_floor>, bin, trailing]` (the final 1-3 bytes spimdisasm's data path drops);
|
|
# for a 4-aligned overlay the marker line is removed. The Makefile build/assets/%.o rule + the
|
|
# objcopy end-align TRIM finish the job. Hand-instantiated configs (ov_SC01_077) inline the carve.
|