This adds support for replacing existing merc models in FR3 files with
custom GLB model files. The replacements go in
`custom_assets/<GAME>/merc_replacements`, similar to texture
replacements. When a `.glb` file with a file name that matches any model
present in an FR3 is detected (e.g. `eichar-lod0` for Jak), all merc
model data is replaced with the given model.
Additionally, models for custom actors can now also be added to vanilla
FR3s. The models for this go in
`custom_assets/<GAME>/models/<LEVEL_NAME>` (e.g.
`custom_assets/jak1/models/jungleb/test-actor-lod0.glb`) and will be
added to the FR3 that has a matching name (exception: to add things to
the common level file, the folder should be named `common` instead of
`GAME`).
For custom levels, these now go in
`custom_assets/<GAME>/models/custom_levels` (previously
`custom_assets/<GAME>/models`).
Another small change: When level ripping is enabled, the resulting model
files will now be stored in game name subfolders inside of `glb_out`.
This does a couple of things:
- The `custom_levels` folder was renamed to `custom_assets` and contains
`levels`, `models` and `texture_replacements` folders for Jak 1, 2 and 3
in order to keep everything regarding custom stuff in one place.
- With this, texture replacements now use separate folders for all games
- A build actor tool was added that generates art groups for custom
actors
- Custom levels can now specify what custom models from the `models`
folder they want to import, this will add them to the level's FR3.
- A `test-zone-obs.gc` file was added, containing a `test-actor` process
that uses a custom model as an example.
The build actor tool is still very WIP, the joints and the default
animation are hardcoded, but it allows for importing any GLB file as a
merc model.
This adds hfrag, but with a few remaining issues:
- The textures aren't animated. Instead, it just uses one texture.
- The texture filtering isn't as good as at it could be.
I also cleaned up a few issues with the background renderers:
- Cleaned up some stuff that is common to hfrag, tie, tfrag, shrub
- Moved time-of-day color packing stuff to FR3 creation, rather than at
level load. This appears to reduce the frame time spikes when a level is
first drawn by about 5 or 6 ms in big levels.
- Cleaned up the x86 specific stuff used in time of day. Now there's
only one place where we have an `ifdef`, rather than spreading it all
over the rendering code.
This fixes issues with certain Jak 3 levels not rendering because there
is a mismatch between the DGO name, nickname and real level name (bsp
name).
FR3s use a different filename, so you can delete the ones you have after
this is merged.
This affects custom levels, but I don't have that toolchain set up so
someone else will have to test that.
During level extraction, the last 4 characters of the level name are
always removed, because it is assumed that '-vis' is there. But it isn't
always there. This is especially true in post-TPL games.
This causes multiple problems:
- There can be levels in the extraction that will miss their last 4
characters from their name, which is sad, and may make it harder to
identify them.
- If there are '-vis'-less levels whose names are identical apart from
the last 4 characters, the extractor will only get the last one (it
probably extracts all but overwrites everything but the last one). For
example 'ctyasha' and 'ctykora'.
This issue affects the glb extraction and the entities json extraction.
I personally think that just keeping the -vis in the name would be the
best solution, but I guess there was a reason why it was decided that it
should be removed from the name. So to adapt to this, my implementation
will still remove '-vis' from the name, but only if it is actually in
the name - otherwise it won't remove anything.
I hope my changes didn't break anything. Extraction seemed to run fine
after my changes, and I was able to see both ctyasha and ctykora json
files. And didn't see any '-vis', so it is still properly removed.
---------
Co-authored-by: Tyler Wilding <xtvaser@gmail.com>
Added a new `rip_collision` flag to the decompiler config and wired it
up. Cleaned up the comments around these fields in the JSON too for
clarity
Also refactored a bunch of the related extract functions to read from
`config` object rather than pass down a bunch of booleans
This will create a folder like `decompiler_out/jak1/entities` and save a
JSON file per level with all the actors.
Also, it should hopefully make custom level building a little faster.
The progress menu loads its icon textures from a .STR file that we were
previously ignoring.
This change:
- updates the decompiler so it can process a .STR file containing a
texture
- adds a feature to force an entire page to always be loaded in the PC
renderer by putting all textures in the GAME.FR3 file.
- regenerates the texture offset map file for jak 2 with these new
textures
For now, I've just put the icon textures in GAME.FR3. The downside is
that these will always stay on the GPU, using up VRAM even when they
aren't needed. But the entire GAME.FR3 file is under 3 MB so I think
it's ok.
Added framework to do texture animations entirely in C++. Currently only
works on relatively simple ones, and doesn't handle updating all
parameters - only the speeds.
Connected texture animations to merc and tfrag for skull gems, dark
bomb, and scrolling conveyors.
Cleaned up Tfragment/Tfrag3, which used to be two classes. This was one
of the first C++ renderers, so it had a weird design.
This adds environment mapping support to `Merc2`, and turns it on for
Jak 1 and Jak 2.
- The performance is much better
- Jak 1 can be toggled back to the old behavior with `(set! *emerc-hack*
#f)`. The new environment mapping is identical to the old one everywhere
I checked.
- Jak 1 still falls back to generic for ripple/texscroll/blerc/eyes -
there's still no dynamic texture or vertex updating support. The eye
detection stuff will sometimes flag stuff as eyes which is not eyes,
which is fine, but means that generic will be used in some places where
emerc could be used. For example, the shiny plates on jak's arm will be
drawn with generic because jak has eyes.
- Jak 2 hasn't been checked super carefully against PCSX2 yet.
- Jak 2 still isn't technically using emerc, but instead putting emerc
models in the merc bucket.
- The interface to merc is a lot different now and totally custom
OpenGOAL DMA code. The original merc drawing asm doesn't run anymore.
- The FR3 format changed
- Something funky going on with foreground lighting in escape, but
doesn't seem to be related to this change?
Performance comparison, jak 1, in likely the most generic-merc heavy
spot:
- make sure bsp is processed on `l` levels in extraction (caused missing
remaps)
- clean up a few prints in extraction
- handle the <15 byte differences in art group files automatically (no
more errors about file naming)
- fix potential exception thrown by merc2 in a few ways: fixed bad data
in FR3's, check texture index just in case, and handle exceptions a
little bit better (still a crash, but at least you get a print)
- fix mips2 ocean stuff causing ocean far crashes
Favors the `lg` namespace over `fmt` directly, as this will output the
logs to a file / has log levels.
I also made assertion errors go to a file, this unfortunately means
importing `lg` and hence `fmt` which was attempted to be avoided before.
But I'm not sure how else to do this aspect without re-inventing the
file logging.
We have a lot of commented out prints as well that we should probably
cleanup at some point / switch them to trace level and default to `info`
level.
I noticed the pattern of disabling debug logs behind some boolean,
something to consider cleaning up in the future -- if our logs were more
structured (knowing where they are coming from) then a lot this
boilerplate could be eliminated.
Closes#1358
* extractor: refactor and cleanup for multi-game support
* deps: switch to `ghc::filesystem` as it is utf-8 everywhere by default
* extractor: finally working with unicode
* unicode: fix unicode cli args on windows in all `main` functions
* Remove assets folder, use more std::filesystem
* windows fix
* another one for windows
* another one
* better system for different folders
* rm debugging stuff
* let extractor override everything
* dont revert jak1 change
* wip
* learning about colors
* gltf node stuff working
* cleanup
* support textures
* bvh generation seems reasonable
* tree layout
* frag packer, untested and doesnt do real stripping yet
* temp
* working collide frags
* handle bad inputs better
* clean up
* format
* include
* another include
* reorganize for release build use
* tfrag3 data for merc2
* dma hooks for merc2
* start designing merc2 opengl, seems like the simple approach will be the best here
* before bone packing experiment
* fix up bones.gc
* use uniform buffer
* speedup, fix faces and eyes
* final fixes
* docs for ee merc code
* wip
* more extraction stuff
* partial mat1 working
* mat1
* cleanup
* partial mat2 and mat3 support
* merc extraction seems to work
* ci: fix windows releases (hopefully)
* scripts: fix Taskfile file references for linux
* asserts: add `ASSERT_MSG` macro and ensure `stdout` is flushed before `abort`ing
* asserts: refactor all `assert(false);` with a preceeding message instances
* lint: format
* temp...
* fix compiler errors
* assert: allow for string literals in `ASSERT_MSG`
* lint: formatting
* revert temp change for testing
* decompile 90% of shrubbery
* some more progress
* some more
* big function decompiled
* went through `draw-prototype-inline-array-shrub` and made more notes
* shrub: start implementing extract_shrub
* read through current notes and add the info to current decomp
* decomp: allow skipping inline-asm from output
* add code to BspHeader to get GOAL types for shrubs
* add doc
* wip
* fix bad merge
Co-authored-by: Tyler Wilding <xtvaser@gmail.com>
Co-authored-by: Tyler Wilding <xTVaser@users.noreply.github.com>
* add ocean-vu0 mips2c and decomp ocean-texture
* vu1 texture setup
* temp
* unoptimized version working
* optimized version by default
* update ref test
* first pass
* first pass at shrinking fr3s
* only need to load vertices once
* avx2 detect and switch
* fix build
* another ifx'
* one more
* fix the sky and stupid math bug in size check
Hat Kid
ManDude
water111
Luminar Light
Matt Dallmeyer
Tyler Wilding
