This is a major deviation from the original game, which did not have any
way to access the nest after beating Metal Kor as the air train gets
hidden when he is beaten. This was mostly annoying because there are
precursor orbs in that level that you might miss.
This makes it so the air train can once again be used to enter the nest
even after beating Metal Kor. The rest of the level remains mostly the
same, except the Rift Ring does not spawn and an invisible wall is added
to the Metal Kor arena to prevent you from entering it as you are
normally unable to leave it anyway.
Trying to make up for some of the startup speed lost in the SDL
transition. This saves about 1s from start (from ~3s), and about 500 MB
of RAM.
- Faster TIE unpack by merging matrix groups, more efficient vertex
transforms, and skipping normal transforms on groups with no normals.
- Refactor generic merc and merc to use a single renderer with multiple
interfaces, rather than many renderers. Removed "LightningRenderer" as a
special thing, but Warp is still special
- Add more profiling stuff to startup and the loader.
- Remove `SDL_INIT_HAPTIC` - this turned out to be needed for
force-feedback steering wheels, and not needed for controller vibration
- Switched `vag-player` to use quicksort instead of the default GOAL
sort (very slow)
```lisp
(defenum collide-action
:type uint32
:bitfield #t
(solid 0) ;; used for solid things
(rider-plat-sticky 1) ;; used for platforms in rider/platform interactions
(rider-target 2) ;; used for target in rider/platform interactions
(edgegrab-active 3) ;; set/cleared when entering/exiting edgegrab states
(rider-plat 4) ;; used for platforms in rider/platform interactions
(unused 5) ;; totally unused?
(edgegrab-possible 6) ;; used when edge grab checks should be done
(edgegrab-cam 7) ;; set/cleared when entering/exiting edgegrab states
(swingpole-active 8) ;; set/cleared when entering/exiting swingpole states
(racer 9) ;; set/cleared when entering/exiting racer states
(attackable 10) ;; used for something to do with attacking/damaging
(attackable-unused 11) ;; seems to relate to attacking - set in several places but never tested for?
(snowball 12) ;; set/cleared when entering/exiting snowball states
(tube 13) ;; set/cleared when entering/exiting tube states
(flut 14) ;; set/cleared when entering/exiting flutflut states
(racer-grounded 15) ;; set/cleared when entering/exiting certain racer states w/ extra conditions
(racer-unused 16) ;; seems to relate to racer - never set, only cleared in one place?
)
```
This moves the blerc math from mips2c to the Merc2 renderer, and uses
floats instead.
We could potentially do this on the GPU, which would be even faster, but
this isn't that slow in the first place.
Adds support for adding custom subtitles to Jak 2 audio. Comes with a
new editor for the new system and format. Compared to the Jak 1 system,
this is much simpler to make an editor for.
Comes with a few subtitles already made as an example.
Cutscenes are not officially supported but you can technically subtitle
those with editor, so please don't right now.
This new system supports multiple subtitles playing at once (even from a
single source!) and will smartly push the subtitles up if there's a
message already playing:
Unlike in Jak 1, it will not hide the bottom HUD when subtitles are
active:
Sadly this leaves us with not much space for the subtitle region (and
the subtitles are shrunk when the minimap is enabled) but when you have
guards and citizens talking all the time, hiding the HUD every time
anyone spoke would get really frustrating.
The subtitle speaker is also color-coded now, because I thought that
would be fun to do.
TODO:
- [x] proper cutscene support.
- [x] merge mode for cutscenes so we don't have to rewrite the script?
---------
Co-authored-by: Hat Kid <6624576+Hat-Kid@users.noreply.github.com>
Gives proper names to almost every color. It is very apparent that some
colors are context-sensitive/made for a specific purpose, so those
colors were named after that purpose instead of a generic color name.
Normally, when they allocate a VagCmd, they do a bunch of stuff to clear
all the status bits and reset things
in particular the InitVAGCmd function does a lot
but for the stereo command, they do a lot less:
Which means that the new_stereo_command can just have random status bits
left over from whatever the last user had.
we seem to end up in a state where byte21 is set, and this causes
everything else to be wrong and off-by-one dma transfer. My guess is
that the original game avoided this bug due to lucky timing that I don't
understand.
I think the fix of just clearing byte21 is ok because there's no way
that the old value of the byte is useful after the command is
repurposed.
Also fixed an original game bug in `loader.gc` on a method that's called
quite often, though I have no clue what erroneous behavior it could have
even caused.
- elec gates now always render at max quality if you have PS2 lods
disabled. the original render distances are so low that the one in
caspad is impossible to see in normal gameplay.
- `fort-entry-gate-11` and `com-airlock-outer-13` are specifically
banned from the all actors hack because they are placed in a bad spot
and Naughty Dog did not program the airlocks very well.
- fixed NPC talk distance being bad for 1 frame.
- fix `sew-scare-grunt` erroneously keeping its spool anim active if you
killed the enemy.
Adds sprite distort, fixes buggy sprite rendering in progress, adds
scissoring support (used in various scrolling menus) and a very basic
implementation of `blit-displays`. This is enough to make the fade
effect in the progress menu work, along with all the menus working
properly without needing to use the REPL. This does not make screen
flipping and the filter when failing a mission work.
Added support in the decompiler for detecting `dma-buffer-add-gs-set`
and `dma-buffer-add-gs-set-flusha` and updated all of the Jak 2 code to
use it. Readability improved!
Fixes decompiler issue with `with-dma-buffer-add-bucket` not inlining
forms which broke syntax. Fixes store error warnings showing up for
non-existent stores, there is now a dedicated pass for this at the end.
I started work on making `BITBLTBUF` stuff work in the DirectRenderer,
but stopped for now because it wasn't strictly necessary. It will still
assert like before.
Updates the decompiler for the new format and there's new macros. This
new format should be easier to read/parse.
Also rewrote `sp-init-fields!` (both jak 1 and 2) from assembly to GOAL.
Hopefully I did not miss any regressions in Jak 1/2 while updating the
files, it's a lot.
- [x] compare NTSC-K
- [x] compare NTSC-J
- [x] compare PAL
- [x] figure out version order
- [x] ~~write delta patch for spanish text~~ no need for now
Fixes#2530
Doesn't actually do anything in Jak 2 because the collide mesh isn't
extracted, but the functionality is all there. Also updated the renderer
a bit to keep the colors more readable.
Cleans up every `dummy-*` and `TODO-RENAME-*` method up with either
proper names or by renaming them to `[type-name]-method-[method-id]`
similar to Jak 2's `all-types`.
Also fixes the bad format string in `collide-cache` and adds the event
handler hack to Jak 1.
The game boots and runs fine, but I might have missed a PAL patch or
other manual patches here and there, please double-check if possible.
The last of the missions that had a missing file.
I manually fixed some casting related to a `handle->process`, since this
is the last file...whatever not worth stressing about. But probably an
issue that will crop up in the future.
Co-authored-by: water <awaterford111445@gmail.com>
- decompile `neon-baron-part`, which also has the hideout door for some
reason
- improve a few error messages in static data decompilation
- fix bug with disabling fog in merc
Add the vortex renderer. The vortex texture isn't there yet (it uses the
same texture as clouds), so it uses a checkerboard. But the
colors/vertices seem right.
ManDude
