mirror of
https://github.com/open-goal/jak-project
synced 2026-09-10 12:25:21 -04:00
Alexander J. Semenuk
5d5e35fb9b
## Problem Windows builds break with a current local toolchain (Scoop LLVM 22.1.8, CMake 4.4.0, VS 2026), in two independent ways: 1. The build stops at curl's deliberate guard: `#error "no non-blocking method was found/used/set"` in `third-party/curl/lib/nonblock.c`. 2. From the second configure onward, `cmake --build` re-runs CMake in an endless loop (observed 42 consecutive reconfigure cycles in a single build). Likely the same mechanism behind the "endlessly building" VS 2026 note in `docs/setup/dev/vs.md`. ## Root cause 1. `third-party/curl/CMake/CurlTests.c` passes `int *` to `ioctlsocket()`, whose third parameter is `u_long *`. Clang 22 promotes `-Wincompatible-pointer-types` to a hard error in C, so the `HAVE_IOCTLSOCKET_FIONBIO` try_compile silently fails and `curl_config.h` never defines it. Upstream CI does not see this because the windows-2022 runner image ships an older LLVM. GCC 14 promotes the same warning to a hard error, which is very likely the `CurlTests.c.obj` failure reported from MSYS2 in open-goal/jak-project#3551. Upstream curl hit the identical problem with GCC 14 and fixed the probe in curl 8.8.0 (curl/curl#13578). 2. The root CMakeLists copies the build tree's `compile_commands.json` into `<src>/build/` for clangd using `configure_file()`, which registers its input as a configure dependency. CMake rewrites `compile_commands.json` late in every generation, after `CTestTestfile.cmake` and `cmake_install.cmake` (outputs of the same Ninja regen rule), so once the dependency is registered the rule is deterministically dirty and every `ninja` invocation re-runs CMake. A pristine first configure is safe (the file does not exist yet, so the `if(EXISTS ...)` guard skips the copy), which is why the loop looks machine- or IDE-specific. ## Fix 1. Per review, re-vendor `third-party/curl` at the `curl-8_21_0` tag (previously `curl-8_3_0`), which carries the upstream probe fix plus two years of upstream development; `vendor.yaml` updated to match. Adjustments the version jump forced: - curl 8.15 removed the native macOS Secure Transport backend (`CURL_USE_SECTRANSP`), so macOS now builds curl against OpenSSL like Linux. The two macOS workflows install Homebrew `openssl@3` and export `OPENSSL_ROOT_DIR` (keg-only), and the macOS setup docs gained the same two lines. - `CURL_BROTLI` / `CURL_ZSTD` switched to AUTO-detection in curl 8.10; pinned OFF to keep the previous no-compression behavior and avoid silently linking whatever the CI images happen to have. - curl's new top-level `BUILD_EXAMPLES` cache option (default ON) leaked into discord-rpc's identically named option and broke configure at a nonexistent `examples/send-presence` directory; pinned OFF ahead of the third-party subdirectories. The diff is dominated by the mechanical tag-tree swap under `third-party/curl` (linguist-vendored, collapsed in review). The hand-written changes are `CMakeLists.txt`, the two macOS workflows, `docs/setup/system/macos.md`, and `vendor.yaml`. 2. Swap `configure_file()` for `file(COPY ...)`: the same clangd copy with no configure dependency registered. (`file(COPY_FILE ... ONLY_IF_DIFFERENT)` would be cleaner still but requires CMake 3.21, above the declared `cmake_minimum_required(VERSION 3.10)`.) ## Test plan - [x] Fresh `cmake --preset Release-windows-clang` (LLVM 22, no cache seeding) completes and logs `Enabled SSL backends: Schannel`; the FIONBIO probe passes without the previous `#error` - [x] Full Windows Release build from scratch in the branch worktree (all 1422 targets) - [x] goalc-test suite: 1509 passed, 0 failed - [x] Second consecutive configure with `compile_commands.json` present: the regen rule in `build.ninja` has no `compile_commands.json` input; `<src>/build/compile_commands.json` is still refreshed for clangd - [x] Repeated `ninja` invocations after a full build no longer re-run CMake - [x] macOS Intel and ARM CI green (first exercise of the OpenSSL backend switch) --- I work off a self-hosted forge, so this GitHub account is quiet; the configure logs and ninja dirty-node traces from the investigation are available if anyone wants the raw data. (AI-assisted)
1.4 KiB
Vendored
Generated
1.4 KiB
Vendored
Generated
c, SPDX-License-Identifier, Long, Arg, Help, Protocols, Category, Added, Multi, See-also, Example
| c | SPDX-License-Identifier | Long | Arg | Help | Protocols | Category | Added | Multi | See-also | Example | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al. | curl | cacert | <file> | CA certificate to verify peer against | TLS | tls | 7.5 | single |
|
|
--cacert
Use the specified certificate file to verify the peer. The file may contain multiple CA certificates. The certificate(s) must be in PEM format. Normally curl is built to use a default file for this, so this option is typically used to alter that default file.
curl recognizes the environment variable named 'CURL_CA_BUNDLE' if it is set and the TLS backend is not Schannel, and uses the given path as a path to a CA cert bundle. This option overrides that variable.
(Windows) curl automatically looks for a CA certs file named 'curl-ca-bundle.crt', either in the same directory as curl.exe, or in the Current Working Directory, or in any folder along your PATH.
curl 8.11.0 added a build-time option to disable this search behavior, and another option to restrict search to the application's directory.
(Schannel) This option is supported for Schannel in Windows 7 or later (added in 7.60.0). This option is supported for backward compatibility with other SSL engines; instead it is recommended to use Windows' store of root certificates (the default for Schannel).