mirror of https://github.com/open-goal/jak-project synced 2026-09-10 20:29:51 -04:00

Files

T

Alexander J. Semenuk 5d5e35fb9b fix: Windows toolchain compatibility (curl 8.21 re-vendor, endless reconfigure loop) (#4355 )

## Problem

Windows builds break with a current local toolchain (Scoop LLVM 22.1.8,
CMake 4.4.0, VS 2026), in two independent ways:

1. The build stops at curl's deliberate guard: `#error "no non-blocking
method was found/used/set"` in `third-party/curl/lib/nonblock.c`.
2. From the second configure onward, `cmake --build` re-runs CMake in an
endless loop (observed 42 consecutive reconfigure cycles in a single
build). Likely the same mechanism behind the "endlessly building" VS
2026 note in `docs/setup/dev/vs.md`.

## Root cause

1. `third-party/curl/CMake/CurlTests.c` passes `int *` to
`ioctlsocket()`, whose third parameter is `u_long *`. Clang 22 promotes
`-Wincompatible-pointer-types` to a hard error in C, so the
`HAVE_IOCTLSOCKET_FIONBIO` try_compile silently fails and
`curl_config.h` never defines it. Upstream CI does not see this because
the windows-2022 runner image ships an older LLVM. GCC 14 promotes the
same warning to a hard error, which is very likely the `CurlTests.c.obj`
failure reported from MSYS2 in open-goal/jak-project#3551. Upstream curl
hit the identical problem with GCC 14 and fixed the probe in curl 8.8.0
(curl/curl#13578).
2. The root CMakeLists copies the build tree's `compile_commands.json`
into `<src>/build/` for clangd using `configure_file()`, which registers
its input as a configure dependency. CMake rewrites
`compile_commands.json` late in every generation, after
`CTestTestfile.cmake` and `cmake_install.cmake` (outputs of the same
Ninja regen rule), so once the dependency is registered the rule is
deterministically dirty and every `ninja` invocation re-runs CMake. A
pristine first configure is safe (the file does not exist yet, so the
`if(EXISTS ...)` guard skips the copy), which is why the loop looks
machine- or IDE-specific.

## Fix

1. Per review, re-vendor `third-party/curl` at the `curl-8_21_0` tag
(previously `curl-8_3_0`), which carries the upstream probe fix plus two
years of upstream development; `vendor.yaml` updated to match.
Adjustments the version jump forced:
- curl 8.15 removed the native macOS Secure Transport backend
(`CURL_USE_SECTRANSP`), so macOS now builds curl against OpenSSL like
Linux. The two macOS workflows install Homebrew `openssl@3` and export
`OPENSSL_ROOT_DIR` (keg-only), and the macOS setup docs gained the same
two lines.
- `CURL_BROTLI` / `CURL_ZSTD` switched to AUTO-detection in curl 8.10;
pinned OFF to keep the previous no-compression behavior and avoid
silently linking whatever the CI images happen to have.
- curl's new top-level `BUILD_EXAMPLES` cache option (default ON) leaked
into discord-rpc's identically named option and broke configure at a
nonexistent `examples/send-presence` directory; pinned OFF ahead of the
third-party subdirectories.

The diff is dominated by the mechanical tag-tree swap under
`third-party/curl` (linguist-vendored, collapsed in review). The
hand-written changes are `CMakeLists.txt`, the two macOS workflows,
`docs/setup/system/macos.md`, and `vendor.yaml`.
2. Swap `configure_file()` for `file(COPY ...)`: the same clangd copy
with no configure dependency registered. (`file(COPY_FILE ...
ONLY_IF_DIFFERENT)` would be cleaner still but requires CMake 3.21,
above the declared `cmake_minimum_required(VERSION 3.10)`.)

## Test plan

- [x] Fresh `cmake --preset Release-windows-clang` (LLVM 22, no cache
seeding) completes and logs `Enabled SSL backends: Schannel`; the
FIONBIO probe passes without the previous `#error`
- [x] Full Windows Release build from scratch in the branch worktree
(all 1422 targets)
- [x] goalc-test suite: 1509 passed, 0 failed
- [x] Second consecutive configure with `compile_commands.json` present:
the regen rule in `build.ninja` has no `compile_commands.json` input;
`<src>/build/compile_commands.json` is still refreshed for clangd
- [x] Repeated `ninja` invocations after a full build no longer re-run
CMake
- [x] macOS Intel and ARM CI green (first exercise of the OpenSSL
backend switch)

---

I work off a self-hosted forge, so this GitHub account is quiet; the
configure logs and ninja dirty-node traces from the investigation are
available if anyone wants the raw data.

(AI-assisted)

2026-07-27 19:19:18 -04:00

2.0 KiB

Vendored

Generated

Raw Permalink Blame History

c, SPDX-License-Identifier, Title, Section, Source, See-also, Protocol, Added-in

SPDX-License-Identifier

Title

Section

Source

See-also

Protocol

Added-in

curl

curl_easy_cleanup

libcurl

curl_easy_duphandle (3)

curl_easy_init (3)

curl_easy_reset (3)

curl_multi_cleanup (3)

curl_multi_remove_handle (3)

All

7.1

NAME

curl_easy_cleanup - free an easy handle

SYNOPSIS

#include <curl/curl.h>

void curl_easy_cleanup(CURL *handle);

DESCRIPTION

This function is the opposite of curl_easy_init(3). It closes down and frees all resources previously associated with this easy handle.

This call closes all connections this handle has used and possibly has kept open until now unless the easy handle was attached to a multi handle while doing the transfers. Do not call this function if you intend to transfer more files, reusing handles is a key to good performance with libcurl.

Occasionally you may get your progress callback or header callback called from within curl_easy_cleanup(3) (if previously set for the handle using curl_easy_setopt(3)). Like if libcurl decides to shut down the connection and the protocol is of a kind that requires a command/response sequence before disconnect. Examples of such protocols are FTP, POP3 and IMAP.

Any use of the easy handle after this function has been called and have returned, is illegal.

To close an easy handle that has been used with the multi interface, make sure to first call curl_multi_remove_handle(3) to remove it from the multi handle before it is closed.

Passing in a NULL pointer in handle makes this function return immediately with no action.

%PROTOCOLS%

EXAMPLE

int main(void)
{
  CURL *curl = curl_easy_init();
  if(curl) {
    CURLcode result;
    curl_easy_setopt(curl, CURLOPT_URL, "https://example.com");
    result = curl_easy_perform(curl);
    if(result != CURLE_OK)
      printf("error: %s\n", curl_easy_strerror(result));
    curl_easy_cleanup(curl);
  }
}

%AVAILABILITY%

RETURN VALUE

None

2.0 KiB Vendored Generated Raw Permalink Blame History