mirror of
https://github.com/open-goal/jak-project
synced 2026-09-11 20:41:41 -04:00
Alexander J. Semenuk
5d5e35fb9b
## Problem Windows builds break with a current local toolchain (Scoop LLVM 22.1.8, CMake 4.4.0, VS 2026), in two independent ways: 1. The build stops at curl's deliberate guard: `#error "no non-blocking method was found/used/set"` in `third-party/curl/lib/nonblock.c`. 2. From the second configure onward, `cmake --build` re-runs CMake in an endless loop (observed 42 consecutive reconfigure cycles in a single build). Likely the same mechanism behind the "endlessly building" VS 2026 note in `docs/setup/dev/vs.md`. ## Root cause 1. `third-party/curl/CMake/CurlTests.c` passes `int *` to `ioctlsocket()`, whose third parameter is `u_long *`. Clang 22 promotes `-Wincompatible-pointer-types` to a hard error in C, so the `HAVE_IOCTLSOCKET_FIONBIO` try_compile silently fails and `curl_config.h` never defines it. Upstream CI does not see this because the windows-2022 runner image ships an older LLVM. GCC 14 promotes the same warning to a hard error, which is very likely the `CurlTests.c.obj` failure reported from MSYS2 in open-goal/jak-project#3551. Upstream curl hit the identical problem with GCC 14 and fixed the probe in curl 8.8.0 (curl/curl#13578). 2. The root CMakeLists copies the build tree's `compile_commands.json` into `<src>/build/` for clangd using `configure_file()`, which registers its input as a configure dependency. CMake rewrites `compile_commands.json` late in every generation, after `CTestTestfile.cmake` and `cmake_install.cmake` (outputs of the same Ninja regen rule), so once the dependency is registered the rule is deterministically dirty and every `ninja` invocation re-runs CMake. A pristine first configure is safe (the file does not exist yet, so the `if(EXISTS ...)` guard skips the copy), which is why the loop looks machine- or IDE-specific. ## Fix 1. Per review, re-vendor `third-party/curl` at the `curl-8_21_0` tag (previously `curl-8_3_0`), which carries the upstream probe fix plus two years of upstream development; `vendor.yaml` updated to match. Adjustments the version jump forced: - curl 8.15 removed the native macOS Secure Transport backend (`CURL_USE_SECTRANSP`), so macOS now builds curl against OpenSSL like Linux. The two macOS workflows install Homebrew `openssl@3` and export `OPENSSL_ROOT_DIR` (keg-only), and the macOS setup docs gained the same two lines. - `CURL_BROTLI` / `CURL_ZSTD` switched to AUTO-detection in curl 8.10; pinned OFF to keep the previous no-compression behavior and avoid silently linking whatever the CI images happen to have. - curl's new top-level `BUILD_EXAMPLES` cache option (default ON) leaked into discord-rpc's identically named option and broke configure at a nonexistent `examples/send-presence` directory; pinned OFF ahead of the third-party subdirectories. The diff is dominated by the mechanical tag-tree swap under `third-party/curl` (linguist-vendored, collapsed in review). The hand-written changes are `CMakeLists.txt`, the two macOS workflows, `docs/setup/system/macos.md`, and `vendor.yaml`. 2. Swap `configure_file()` for `file(COPY ...)`: the same clangd copy with no configure dependency registered. (`file(COPY_FILE ... ONLY_IF_DIFFERENT)` would be cleaner still but requires CMake 3.21, above the declared `cmake_minimum_required(VERSION 3.10)`.) ## Test plan - [x] Fresh `cmake --preset Release-windows-clang` (LLVM 22, no cache seeding) completes and logs `Enabled SSL backends: Schannel`; the FIONBIO probe passes without the previous `#error` - [x] Full Windows Release build from scratch in the branch worktree (all 1422 targets) - [x] goalc-test suite: 1509 passed, 0 failed - [x] Second consecutive configure with `compile_commands.json` present: the regen rule in `build.ninja` has no `compile_commands.json` input; `<src>/build/compile_commands.json` is still refreshed for clangd - [x] Repeated `ninja` invocations after a full build no longer re-run CMake - [x] macOS Intel and ARM CI green (first exercise of the OpenSSL backend switch) --- I work off a self-hosted forge, so this GitHub account is quiet; the configure logs and ninja dirty-node traces from the investigation are available if anyone wants the raw data. (AI-assisted)
1.8 KiB
Vendored
Generated
1.8 KiB
Vendored
Generated
c, SPDX-License-Identifier, Title, Section, Source, See-also, Protocol, Added-in
| c | SPDX-License-Identifier | Title | Section | Source | See-also | Protocol | Added-in | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al. | curl | CURLMOPT_PIPELINING | 3 | libcurl |
|
|
7.16.0 |
NAME
CURLMOPT_PIPELINING - enable HTTP multiplexing
SYNOPSIS
#include <curl/curl.h>
CURLMcode curl_multi_setopt(CURLM *handle, CURLMOPT_PIPELINING, long bitmask);
DESCRIPTION
Pass in the correct value in the bitmask parameter to instruct libcurl to enable multiplexing for this multi handle.
With multiplexing enabled, libcurl attempts to do multiple transfers over the same connection when doing parallel transfers to the same hosts.
CURLPIPE_NOTHING (0)
Make no attempts at multiplexing.
CURLPIPE_HTTP1 (1)
This bit is deprecated and has no effect since version 7.62.0.
CURLPIPE_MULTIPLEX (2)
If this bit is set, libcurl tries to multiplex the new transfer over an existing connection if possible. This requires HTTP/2 or HTTP/3.
DEFAULT
CURLPIPE_MULTIPLEX
%PROTOCOLS%
EXAMPLE
int main(void)
{
CURLM *m = curl_multi_init();
/* try HTTP/2 multiplexing */
curl_multi_setopt(m, CURLMOPT_PIPELINING, CURLPIPE_MULTIPLEX);
}
HISTORY
The multiplex support bit was added in 7.43.0. HTTP/1 Pipelining support was disabled in 7.62.0.
Since 7.62.0, CURLPIPE_MULTIPLEX is enabled by default.
Before that, default was CURLPIPE_NOTHING.
%AVAILABILITY%
RETURN VALUE
curl_multi_setopt(3) returns a CURLMcode indicating success or error.
CURLM_OK (0) means everything was OK, non-zero means an error occurred, see libcurl-errors(3).