mirror of
https://github.com/open-goal/jak-project
synced 2026-08-23 23:23:20 -04:00
Alexander J. Semenuk
5d5e35fb9b
## Problem Windows builds break with a current local toolchain (Scoop LLVM 22.1.8, CMake 4.4.0, VS 2026), in two independent ways: 1. The build stops at curl's deliberate guard: `#error "no non-blocking method was found/used/set"` in `third-party/curl/lib/nonblock.c`. 2. From the second configure onward, `cmake --build` re-runs CMake in an endless loop (observed 42 consecutive reconfigure cycles in a single build). Likely the same mechanism behind the "endlessly building" VS 2026 note in `docs/setup/dev/vs.md`. ## Root cause 1. `third-party/curl/CMake/CurlTests.c` passes `int *` to `ioctlsocket()`, whose third parameter is `u_long *`. Clang 22 promotes `-Wincompatible-pointer-types` to a hard error in C, so the `HAVE_IOCTLSOCKET_FIONBIO` try_compile silently fails and `curl_config.h` never defines it. Upstream CI does not see this because the windows-2022 runner image ships an older LLVM. GCC 14 promotes the same warning to a hard error, which is very likely the `CurlTests.c.obj` failure reported from MSYS2 in open-goal/jak-project#3551. Upstream curl hit the identical problem with GCC 14 and fixed the probe in curl 8.8.0 (curl/curl#13578). 2. The root CMakeLists copies the build tree's `compile_commands.json` into `<src>/build/` for clangd using `configure_file()`, which registers its input as a configure dependency. CMake rewrites `compile_commands.json` late in every generation, after `CTestTestfile.cmake` and `cmake_install.cmake` (outputs of the same Ninja regen rule), so once the dependency is registered the rule is deterministically dirty and every `ninja` invocation re-runs CMake. A pristine first configure is safe (the file does not exist yet, so the `if(EXISTS ...)` guard skips the copy), which is why the loop looks machine- or IDE-specific. ## Fix 1. Per review, re-vendor `third-party/curl` at the `curl-8_21_0` tag (previously `curl-8_3_0`), which carries the upstream probe fix plus two years of upstream development; `vendor.yaml` updated to match. Adjustments the version jump forced: - curl 8.15 removed the native macOS Secure Transport backend (`CURL_USE_SECTRANSP`), so macOS now builds curl against OpenSSL like Linux. The two macOS workflows install Homebrew `openssl@3` and export `OPENSSL_ROOT_DIR` (keg-only), and the macOS setup docs gained the same two lines. - `CURL_BROTLI` / `CURL_ZSTD` switched to AUTO-detection in curl 8.10; pinned OFF to keep the previous no-compression behavior and avoid silently linking whatever the CI images happen to have. - curl's new top-level `BUILD_EXAMPLES` cache option (default ON) leaked into discord-rpc's identically named option and broke configure at a nonexistent `examples/send-presence` directory; pinned OFF ahead of the third-party subdirectories. The diff is dominated by the mechanical tag-tree swap under `third-party/curl` (linguist-vendored, collapsed in review). The hand-written changes are `CMakeLists.txt`, the two macOS workflows, `docs/setup/system/macos.md`, and `vendor.yaml`. 2. Swap `configure_file()` for `file(COPY ...)`: the same clangd copy with no configure dependency registered. (`file(COPY_FILE ... ONLY_IF_DIFFERENT)` would be cleaner still but requires CMake 3.21, above the declared `cmake_minimum_required(VERSION 3.10)`.) ## Test plan - [x] Fresh `cmake --preset Release-windows-clang` (LLVM 22, no cache seeding) completes and logs `Enabled SSL backends: Schannel`; the FIONBIO probe passes without the previous `#error` - [x] Full Windows Release build from scratch in the branch worktree (all 1422 targets) - [x] goalc-test suite: 1509 passed, 0 failed - [x] Second consecutive configure with `compile_commands.json` present: the regen rule in `build.ninja` has no `compile_commands.json` input; `<src>/build/compile_commands.json` is still refreshed for clangd - [x] Repeated `ninja` invocations after a full build no longer re-run CMake - [x] macOS Intel and ARM CI green (first exercise of the OpenSSL backend switch) --- I work off a self-hosted forge, so this GitHub account is quiet; the configure logs and ninja dirty-node traces from the investigation are available if anyone wants the raw data. (AI-assisted)
537 lines
22 KiB
C
Vendored
Generated
537 lines
22 KiB
C
Vendored
Generated
#ifndef HEADER_LIBTEST_FIRST_H
|
|
#define HEADER_LIBTEST_FIRST_H
|
|
/***************************************************************************
|
|
* _ _ ____ _
|
|
* Project ___| | | | _ \| |
|
|
* / __| | | | |_) | |
|
|
* | (__| |_| | _ <| |___
|
|
* \___|\___/|_| \_\_____|
|
|
*
|
|
* Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
|
|
*
|
|
* This software is licensed as described in the file COPYING, which
|
|
* you should have received as part of this distribution. The terms
|
|
* are also available at https://curl.se/docs/copyright.html.
|
|
*
|
|
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
|
|
* copies of the Software, and permit persons to whom the Software is
|
|
* furnished to do so, under the terms of the COPYING file.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
* SPDX-License-Identifier: curl
|
|
*
|
|
***************************************************************************/
|
|
#define CURL_NO_OLDIES
|
|
#define CURL_DISABLE_DEPRECATION
|
|
|
|
/* Now include the curl_setup.h file from libcurl's private libdir (the source
|
|
version, but that might include "curl_config.h" from the build directory so
|
|
we need both of them in the include path), so that we get good in-depth
|
|
knowledge about the system we are building this on */
|
|
#include "curl_setup.h"
|
|
#include "testutil.h"
|
|
|
|
typedef CURLcode (*entry_func_t)(const char *);
|
|
|
|
struct entry_s {
|
|
const char *name;
|
|
entry_func_t ptr;
|
|
};
|
|
|
|
extern const struct entry_s s_entries[];
|
|
|
|
extern int unitfail; /* for unittests */
|
|
|
|
#include "curlx/base64.h" /* for curlx_base64* */
|
|
#include "curlx/dynbuf.h" /* for curlx_dyn_*() */
|
|
#include "curlx/fopen.h" /* for curlx_f*() */
|
|
#include "curlx/strcopy.h" /* for curlx_strcopy() */
|
|
#include "curlx/strerr.h" /* for curlx_strerror() */
|
|
#include "curlx/strparse.h" /* for curlx_str_* parsing functions */
|
|
#include "curlx/timediff.h" /* for timediff_t type and related functions */
|
|
#include "curlx/timeval.h" /* for curlx_now type and related functions */
|
|
#include "curlx/wait.h" /* for curlx_wait_ms() */
|
|
|
|
#ifdef HAVE_SYS_SELECT_H
|
|
/* since so many tests use select(), we can as well include it here */
|
|
#include <sys/select.h>
|
|
#endif
|
|
|
|
extern const char *libtest_arg2; /* set by first.c to the argv[2] or NULL */
|
|
extern const char *libtest_arg3; /* set by first.c to the argv[3] or NULL */
|
|
extern const char *libtest_arg4; /* set by first.c to the argv[4] or NULL */
|
|
extern const char *libtest_arg5; /* set by first.c to the argv[5] or NULL */
|
|
|
|
/* argc and argv as passed in to the main() function */
|
|
extern int test_argc;
|
|
extern const char **test_argv;
|
|
extern int testnum;
|
|
extern struct curltime tv_test_start; /* for test timing */
|
|
|
|
extern int coptind;
|
|
extern const char *coptarg;
|
|
int cgetopt(int argc, const char * const argv[], const char *optstring);
|
|
|
|
extern int select_wrapper(int nfds, fd_set *rd, fd_set *wr, fd_set *exc,
|
|
struct timeval *tv);
|
|
|
|
extern char *hexdump(const unsigned char *buf, size_t len);
|
|
|
|
#ifndef CURL_DISABLE_WEBSOCKETS
|
|
CURLcode ws_send_ping(CURL *curl, const char *send_payload);
|
|
CURLcode ws_recv_pong(CURL *curl, const char *expected_payload);
|
|
void ws_close(CURL *curl); /* close the connection */
|
|
#endif
|
|
|
|
/*
|
|
* TEST_ERR_* values must be within the CURLcode range to not cause compiler
|
|
* errors.
|
|
*
|
|
* For portability reasons TEST_ERR_* values should be less than 127.
|
|
*/
|
|
#define TEST_ERR_MAJOR_BAD CURLE_OBSOLETE20
|
|
#define TEST_ERR_RUNS_FOREVER CURLE_OBSOLETE24
|
|
#define TEST_ERR_EASY_INIT CURLE_OBSOLETE29
|
|
#define TEST_ERR_MULTI CURLE_OBSOLETE32
|
|
#define TEST_ERR_NUM_HANDLES CURLE_OBSOLETE34
|
|
#define TEST_ERR_SELECT CURLE_OBSOLETE40
|
|
#define TEST_ERR_SUCCESS CURLE_OBSOLETE41
|
|
#define TEST_ERR_FAILURE CURLE_OBSOLETE44
|
|
#define TEST_ERR_USAGE CURLE_OBSOLETE46
|
|
#define TEST_ERR_FOPEN CURLE_OBSOLETE50
|
|
#define TEST_ERR_FSTAT CURLE_OBSOLETE51
|
|
#define TEST_ERR_BAD_TIMEOUT CURLE_OBSOLETE57
|
|
|
|
/*
|
|
* Macros for test source code readability/maintainability.
|
|
*
|
|
* All of the following macros require that an int data type 'res' variable
|
|
* exists in scope where macro is used, and that it has been initialized to
|
|
* zero before the macro is used.
|
|
*
|
|
* exe_* and chk_* macros are helper macros not intended to be used from
|
|
* outside of this header file. Arguments 'Y' and 'Z' of these represent
|
|
* source code file and line number, while Arguments 'A', 'B', etc, are
|
|
* the arguments used to actually call a libcurl function.
|
|
*
|
|
* All easy_* and multi_* macros call a libcurl function and evaluate if
|
|
* the function has succeeded or failed. When the function succeeds 'res'
|
|
* variable is not set nor cleared and program continues normal flow. On
|
|
* the other hand if function fails 'res' variable is set and a jump to
|
|
* label 'test_cleanup' is performed.
|
|
*
|
|
* Every easy_* and multi_* macros have a res_easy_* and res_multi_* macro
|
|
* counterpart that operates in the same way with the exception that no
|
|
* jump takes place in case of failure. res_easy_* and res_multi_* macros
|
|
* should be immediately followed by checking if 'res' variable has been
|
|
* set.
|
|
*
|
|
* 'res' variable when set holds a CURLcode, CURLMcode, or any of the
|
|
* TEST_ERR_* values defined above. It is advisable to return this value
|
|
* as test result.
|
|
*/
|
|
#ifndef UNITTESTS
|
|
|
|
/* ---------------------------------------------------------------- */
|
|
|
|
#define exe_easy_init(A, Y, Z) \
|
|
do { \
|
|
(A) = curl_easy_init(); \
|
|
if(!(A)) { \
|
|
curl_mfprintf(stderr, "%s:%d curl_easy_init() failed\n", Y, Z); \
|
|
result = TEST_ERR_EASY_INIT; \
|
|
} \
|
|
} while(0)
|
|
|
|
#define res_easy_init(A) \
|
|
exe_easy_init(A, __FILE__, __LINE__)
|
|
|
|
#define chk_easy_init(A, Y, Z) \
|
|
do { \
|
|
exe_easy_init(A, Y, Z); \
|
|
if(result) \
|
|
goto test_cleanup; \
|
|
} while(0)
|
|
|
|
#define easy_init(A) \
|
|
chk_easy_init(A, __FILE__, __LINE__)
|
|
|
|
/* ---------------------------------------------------------------- */
|
|
|
|
#define exe_multi_init(A, Y, Z) \
|
|
do { \
|
|
(A) = curl_multi_init(); \
|
|
if(!(A)) { \
|
|
curl_mfprintf(stderr, "%s:%d curl_multi_init() failed\n", Y, Z); \
|
|
result = TEST_ERR_MULTI; \
|
|
} \
|
|
} while(0)
|
|
|
|
#define res_multi_init(A) \
|
|
exe_multi_init(A, __FILE__, __LINE__)
|
|
|
|
#define chk_multi_init(A, Y, Z) \
|
|
do { \
|
|
exe_multi_init(A, Y, Z); \
|
|
if(result) \
|
|
goto test_cleanup; \
|
|
} while(0)
|
|
|
|
#define multi_init(A) \
|
|
chk_multi_init(A, __FILE__, __LINE__)
|
|
|
|
/* ---------------------------------------------------------------- */
|
|
|
|
#define exe_easy_setopt(A, B, C, Y, Z) \
|
|
do { \
|
|
result = curl_easy_setopt(A, B, C); \
|
|
if(result) \
|
|
curl_mfprintf(stderr, \
|
|
"%s:%d curl_easy_setopt() failed, " \
|
|
"with code %d (%s)\n", \
|
|
Y, Z, (int)result, curl_easy_strerror(result)); \
|
|
} while(0)
|
|
|
|
#define res_easy_setopt(A, B, C) \
|
|
exe_easy_setopt(A, B, C, __FILE__, __LINE__)
|
|
|
|
#define chk_easy_setopt(A, B, C, Y, Z) \
|
|
do { \
|
|
exe_easy_setopt(A, B, C, Y, Z); \
|
|
if(result) \
|
|
goto test_cleanup; \
|
|
} while(0)
|
|
|
|
#define easy_setopt(A, B, C) \
|
|
chk_easy_setopt(A, B, C, __FILE__, __LINE__)
|
|
|
|
/* ---------------------------------------------------------------- */
|
|
|
|
#define exe_multi_setopt(A, B, C, Y, Z) \
|
|
do { \
|
|
CURLMcode ec = curl_multi_setopt(A, B, C); \
|
|
if(ec != CURLM_OK) { \
|
|
curl_mfprintf(stderr, \
|
|
"%s:%d curl_multi_setopt() failed, " \
|
|
"with code %d (%s)\n", \
|
|
Y, Z, ec, curl_multi_strerror(ec)); \
|
|
result = TEST_ERR_MULTI; \
|
|
} \
|
|
} while(0)
|
|
|
|
#define chk_multi_setopt(A, B, C, Y, Z) \
|
|
do { \
|
|
exe_multi_setopt(A, B, C, Y, Z); \
|
|
if(result) \
|
|
goto test_cleanup; \
|
|
} while(0)
|
|
|
|
#define multi_setopt(A, B, C) \
|
|
chk_multi_setopt(A, B, C, __FILE__, __LINE__)
|
|
|
|
/* ---------------------------------------------------------------- */
|
|
|
|
#define exe_multi_add_handle(A, B, Y, Z) \
|
|
do { \
|
|
CURLMcode ec = curl_multi_add_handle(A, B); \
|
|
if(ec != CURLM_OK) { \
|
|
curl_mfprintf(stderr, \
|
|
"%s:%d curl_multi_add_handle() failed, " \
|
|
"with code %d (%s)\n", \
|
|
Y, Z, ec, curl_multi_strerror(ec)); \
|
|
result = TEST_ERR_MULTI; \
|
|
} \
|
|
} while(0)
|
|
|
|
#define res_multi_add_handle(A, B) \
|
|
exe_multi_add_handle(A, B, __FILE__, __LINE__)
|
|
|
|
#define chk_multi_add_handle(A, B, Y, Z) \
|
|
do { \
|
|
exe_multi_add_handle(A, B, Y, Z); \
|
|
if(result) \
|
|
goto test_cleanup; \
|
|
} while(0)
|
|
|
|
#define multi_add_handle(A, B) \
|
|
chk_multi_add_handle(A, B, __FILE__, __LINE__)
|
|
|
|
/* ---------------------------------------------------------------- */
|
|
|
|
#define exe_multi_remove_handle(A, B, Y, Z) \
|
|
do { \
|
|
CURLMcode ec = curl_multi_remove_handle(A, B); \
|
|
if(ec != CURLM_OK) { \
|
|
curl_mfprintf(stderr, \
|
|
"%s:%d curl_multi_remove_handle() failed, " \
|
|
"with code %d (%s)\n", \
|
|
Y, Z, ec, curl_multi_strerror(ec)); \
|
|
result = TEST_ERR_MULTI; \
|
|
} \
|
|
} while(0)
|
|
|
|
#define chk_multi_remove_handle(A, B, Y, Z) \
|
|
do { \
|
|
exe_multi_remove_handle(A, B, Y, Z); \
|
|
if(result) \
|
|
goto test_cleanup; \
|
|
} while(0)
|
|
|
|
#define multi_remove_handle(A, B) \
|
|
chk_multi_remove_handle(A, B, __FILE__, __LINE__)
|
|
|
|
/* ---------------------------------------------------------------- */
|
|
|
|
#define exe_multi_perform(A, B, Y, Z) \
|
|
do { \
|
|
CURLMcode ec = curl_multi_perform(A, B); \
|
|
if(ec != CURLM_OK) { \
|
|
curl_mfprintf(stderr, \
|
|
"%s:%d curl_multi_perform() failed, " \
|
|
"with code %d (%s)\n", \
|
|
Y, Z, ec, curl_multi_strerror(ec)); \
|
|
result = TEST_ERR_MULTI; \
|
|
} \
|
|
else if(*(B) < 0) { \
|
|
curl_mfprintf(stderr, \
|
|
"%s:%d curl_multi_perform() succeeded, " \
|
|
"but returned invalid running_handles value (%d)\n", \
|
|
Y, Z, (int)*(B)); \
|
|
result = TEST_ERR_NUM_HANDLES; \
|
|
} \
|
|
} while(0)
|
|
|
|
#define res_multi_perform(A, B) \
|
|
exe_multi_perform(A, B, __FILE__, __LINE__)
|
|
|
|
#define chk_multi_perform(A, B, Y, Z) \
|
|
do { \
|
|
exe_multi_perform(A, B, Y, Z); \
|
|
if(result) \
|
|
goto test_cleanup; \
|
|
} while(0)
|
|
|
|
#define multi_perform(A, B) \
|
|
chk_multi_perform(A, B, __FILE__, __LINE__)
|
|
|
|
/* ---------------------------------------------------------------- */
|
|
|
|
#define exe_multi_fdset(A, B, C, D, E, Y, Z) \
|
|
do { \
|
|
CURLMcode ec = curl_multi_fdset(A, B, C, D, E); \
|
|
if(ec != CURLM_OK) { \
|
|
curl_mfprintf(stderr, \
|
|
"%s:%d curl_multi_fdset() failed, " \
|
|
"with code %d (%s)\n", \
|
|
Y, Z, ec, curl_multi_strerror(ec)); \
|
|
result = TEST_ERR_MULTI; \
|
|
} \
|
|
else if(*(E) < -1) { \
|
|
curl_mfprintf(stderr, \
|
|
"%s:%d curl_multi_fdset() succeeded, " \
|
|
"but returned invalid max_fd value (%d)\n", \
|
|
Y, Z, (int)*(E)); \
|
|
result = TEST_ERR_NUM_HANDLES; \
|
|
} \
|
|
} while(0)
|
|
|
|
#define res_multi_fdset(A, B, C, D, E) \
|
|
exe_multi_fdset(A, B, C, D, E, __FILE__, __LINE__)
|
|
|
|
#define chk_multi_fdset(A, B, C, D, E, Y, Z) \
|
|
do { \
|
|
exe_multi_fdset(A, B, C, D, E, Y, Z); \
|
|
if(result) \
|
|
goto test_cleanup; \
|
|
} while(0)
|
|
|
|
#define multi_fdset(A, B, C, D, E) \
|
|
chk_multi_fdset(A, B, C, D, E, __FILE__, __LINE__)
|
|
|
|
/* ---------------------------------------------------------------- */
|
|
|
|
#define exe_multi_timeout(A, B, Y, Z) \
|
|
do { \
|
|
CURLMcode ec = curl_multi_timeout(A, B); \
|
|
if(ec != CURLM_OK) { \
|
|
curl_mfprintf(stderr, \
|
|
"%s:%d curl_multi_timeout() failed, " \
|
|
"with code %d (%s)\n", \
|
|
Y, Z, ec, curl_multi_strerror(ec)); \
|
|
result = TEST_ERR_BAD_TIMEOUT; \
|
|
} \
|
|
else if(*(B) < -1L) { \
|
|
curl_mfprintf(stderr, \
|
|
"%s:%d curl_multi_timeout() succeeded, " \
|
|
"but returned invalid timeout value (%ld)\n", \
|
|
Y, Z, (long)*(B)); \
|
|
result = TEST_ERR_BAD_TIMEOUT; \
|
|
} \
|
|
} while(0)
|
|
|
|
#define res_multi_timeout(A, B) \
|
|
exe_multi_timeout(A, B, __FILE__, __LINE__)
|
|
|
|
#define chk_multi_timeout(A, B, Y, Z) \
|
|
do { \
|
|
exe_multi_timeout(A, B, Y, Z); \
|
|
if(result) \
|
|
goto test_cleanup; \
|
|
} while(0)
|
|
|
|
#define multi_timeout(A, B) \
|
|
chk_multi_timeout(A, B, __FILE__, __LINE__)
|
|
|
|
/* ---------------------------------------------------------------- */
|
|
|
|
#define exe_multi_poll(A, B, C, D, E, Y, Z) \
|
|
do { \
|
|
CURLMcode ec = curl_multi_poll(A, B, C, D, E); \
|
|
if(ec != CURLM_OK) { \
|
|
curl_mfprintf(stderr, \
|
|
"%s:%d curl_multi_poll() failed, " \
|
|
"with code %d (%s)\n", \
|
|
Y, Z, ec, curl_multi_strerror(ec)); \
|
|
result = TEST_ERR_MULTI; \
|
|
} \
|
|
else if(*(E) < 0) { \
|
|
curl_mfprintf(stderr, \
|
|
"%s:%d curl_multi_poll() succeeded, " \
|
|
"but returned invalid numfds value (%d)\n", \
|
|
Y, Z, (int)*(E)); \
|
|
result = TEST_ERR_NUM_HANDLES; \
|
|
} \
|
|
} while(0)
|
|
|
|
#define chk_multi_poll(A, B, C, D, E, Y, Z) \
|
|
do { \
|
|
exe_multi_poll(A, B, C, D, E, Y, Z); \
|
|
if(result) \
|
|
goto test_cleanup; \
|
|
} while(0)
|
|
|
|
#define multi_poll(A, B, C, D, E) \
|
|
chk_multi_poll(A, B, C, D, E, __FILE__, __LINE__)
|
|
|
|
/* ---------------------------------------------------------------- */
|
|
|
|
#define exe_multi_wakeup(A, Y, Z) \
|
|
do { \
|
|
CURLMcode ec = curl_multi_wakeup(A); \
|
|
if(ec != CURLM_OK) { \
|
|
curl_mfprintf(stderr, \
|
|
"%s:%d curl_multi_wakeup() failed, " \
|
|
"with code %d (%s)\n", \
|
|
Y, Z, ec, curl_multi_strerror(ec)); \
|
|
result = TEST_ERR_MULTI; \
|
|
} \
|
|
} while(0)
|
|
|
|
#define res_multi_wakeup(A) \
|
|
exe_multi_wakeup(A, __FILE__, __LINE__)
|
|
|
|
/* ---------------------------------------------------------------- */
|
|
|
|
#define exe_select_test(A, B, C, D, E, Y, Z) \
|
|
do { \
|
|
if(select_wrapper(A, B, C, D, E) == -1) { \
|
|
int sockerr = SOCKERRNO; \
|
|
char sockerrbuf[STRERROR_LEN]; \
|
|
curl_mfprintf(stderr, \
|
|
"%s:%d select() failed, with errno %d (%s)\n", Y, Z, \
|
|
sockerr, curlx_strerror(sockerr, sockerrbuf, \
|
|
sizeof(sockerrbuf))); \
|
|
result = TEST_ERR_SELECT; \
|
|
} \
|
|
} while(0)
|
|
|
|
#define res_select_test(A, B, C, D, E) \
|
|
exe_select_test(A, B, C, D, E, __FILE__, __LINE__)
|
|
|
|
#define chk_select_test(A, B, C, D, E, Y, Z) \
|
|
do { \
|
|
exe_select_test(A, B, C, D, E, Y, Z); \
|
|
if(result) \
|
|
goto test_cleanup; \
|
|
} while(0)
|
|
|
|
#define select_test(A, B, C, D, E) \
|
|
chk_select_test(A, B, C, D, E, __FILE__, __LINE__)
|
|
|
|
/* ---------------------------------------------------------------- */
|
|
|
|
#define start_test_timing() \
|
|
do { \
|
|
tv_test_start = curlx_now(); \
|
|
} while(0)
|
|
|
|
#define TEST_HANG_TIMEOUT (60 * 1000) /* global default */
|
|
|
|
#define exe_test_timedout(T, Y, Z) \
|
|
do { \
|
|
timediff_t timediff = curlx_timediff_ms(curlx_now(), tv_test_start); \
|
|
if(timediff > (T)) { \
|
|
curl_mfprintf(stderr, \
|
|
"%s:%d ABORTING TEST, since it seems " \
|
|
"that it would have run forever (%ld ms > %ld ms)\n", \
|
|
Y, Z, (long)timediff, (long)TEST_HANG_TIMEOUT); \
|
|
result = TEST_ERR_RUNS_FOREVER; \
|
|
} \
|
|
} while(0)
|
|
|
|
#define res_test_timedout() \
|
|
exe_test_timedout(TEST_HANG_TIMEOUT, __FILE__, __LINE__)
|
|
|
|
#define chk_test_timedout(T, Y, Z) \
|
|
do { \
|
|
exe_test_timedout(T, Y, Z); \
|
|
if(result) \
|
|
goto test_cleanup; \
|
|
} while(0)
|
|
|
|
#define abort_on_test_timeout() \
|
|
chk_test_timedout(TEST_HANG_TIMEOUT, __FILE__, __LINE__)
|
|
|
|
#define abort_on_test_timeout_custom(T) \
|
|
chk_test_timedout(T, __FILE__, __LINE__)
|
|
|
|
#define NUM_HANDLES 4 /* global default */
|
|
|
|
#define res_global_init(A) \
|
|
exe_global_init(A, __FILE__, __LINE__)
|
|
|
|
#endif /* !UNITTESTS */
|
|
|
|
#if !defined(UNITTESTS) || defined(BUILDING_LIBCURL)
|
|
|
|
/* ---------------------------------------------------------------- */
|
|
|
|
#define exe_global_init(A, Y, Z) \
|
|
do { \
|
|
result = curl_global_init(A); \
|
|
if(result) \
|
|
curl_mfprintf(stderr, \
|
|
"%s:%d curl_global_init() failed, " \
|
|
"with code %d (%s)\n", \
|
|
Y, Z, (int)result, curl_easy_strerror(result)); \
|
|
} while(0)
|
|
|
|
#define chk_global_init(A, Y, Z) \
|
|
do { \
|
|
exe_global_init(A, Y, Z); \
|
|
if(result) \
|
|
return result; \
|
|
} while(0)
|
|
|
|
/* global_init() is different than other macros. In case of
|
|
failure it 'return's instead of going to 'test_cleanup'. */
|
|
|
|
#define global_init(A) \
|
|
chk_global_init(A, __FILE__, __LINE__)
|
|
|
|
#endif /* !UNITTESTS || BUILDING_LIBCURL */
|
|
|
|
#endif /* HEADER_LIBTEST_FIRST_H */
|