Alexander J. Semenuk
5d5e35fb9b
## Problem Windows builds break with a current local toolchain (Scoop LLVM 22.1.8, CMake 4.4.0, VS 2026), in two independent ways: 1. The build stops at curl's deliberate guard: `#error "no non-blocking method was found/used/set"` in `third-party/curl/lib/nonblock.c`. 2. From the second configure onward, `cmake --build` re-runs CMake in an endless loop (observed 42 consecutive reconfigure cycles in a single build). Likely the same mechanism behind the "endlessly building" VS 2026 note in `docs/setup/dev/vs.md`. ## Root cause 1. `third-party/curl/CMake/CurlTests.c` passes `int *` to `ioctlsocket()`, whose third parameter is `u_long *`. Clang 22 promotes `-Wincompatible-pointer-types` to a hard error in C, so the `HAVE_IOCTLSOCKET_FIONBIO` try_compile silently fails and `curl_config.h` never defines it. Upstream CI does not see this because the windows-2022 runner image ships an older LLVM. GCC 14 promotes the same warning to a hard error, which is very likely the `CurlTests.c.obj` failure reported from MSYS2 in open-goal/jak-project#3551. Upstream curl hit the identical problem with GCC 14 and fixed the probe in curl 8.8.0 (curl/curl#13578). 2. The root CMakeLists copies the build tree's `compile_commands.json` into `<src>/build/` for clangd using `configure_file()`, which registers its input as a configure dependency. CMake rewrites `compile_commands.json` late in every generation, after `CTestTestfile.cmake` and `cmake_install.cmake` (outputs of the same Ninja regen rule), so once the dependency is registered the rule is deterministically dirty and every `ninja` invocation re-runs CMake. A pristine first configure is safe (the file does not exist yet, so the `if(EXISTS ...)` guard skips the copy), which is why the loop looks machine- or IDE-specific. ## Fix 1. Per review, re-vendor `third-party/curl` at the `curl-8_21_0` tag (previously `curl-8_3_0`), which carries the upstream probe fix plus two years of upstream development; `vendor.yaml` updated to match. Adjustments the version jump forced: - curl 8.15 removed the native macOS Secure Transport backend (`CURL_USE_SECTRANSP`), so macOS now builds curl against OpenSSL like Linux. The two macOS workflows install Homebrew `openssl@3` and export `OPENSSL_ROOT_DIR` (keg-only), and the macOS setup docs gained the same two lines. - `CURL_BROTLI` / `CURL_ZSTD` switched to AUTO-detection in curl 8.10; pinned OFF to keep the previous no-compression behavior and avoid silently linking whatever the CI images happen to have. - curl's new top-level `BUILD_EXAMPLES` cache option (default ON) leaked into discord-rpc's identically named option and broke configure at a nonexistent `examples/send-presence` directory; pinned OFF ahead of the third-party subdirectories. The diff is dominated by the mechanical tag-tree swap under `third-party/curl` (linguist-vendored, collapsed in review). The hand-written changes are `CMakeLists.txt`, the two macOS workflows, `docs/setup/system/macos.md`, and `vendor.yaml`. 2. Swap `configure_file()` for `file(COPY ...)`: the same clangd copy with no configure dependency registered. (`file(COPY_FILE ... ONLY_IF_DIFFERENT)` would be cleaner still but requires CMake 3.21, above the declared `cmake_minimum_required(VERSION 3.10)`.) ## Test plan - [x] Fresh `cmake --preset Release-windows-clang` (LLVM 22, no cache seeding) completes and logs `Enabled SSL backends: Schannel`; the FIONBIO probe passes without the previous `#error` - [x] Full Windows Release build from scratch in the branch worktree (all 1422 targets) - [x] goalc-test suite: 1509 passed, 0 failed - [x] Second consecutive configure with `compile_commands.json` present: the regen rule in `build.ninja` has no `compile_commands.json` input; `<src>/build/compile_commands.json` is still refreshed for clangd - [x] Repeated `ninja` invocations after a full build no longer re-run CMake - [x] macOS Intel and ARM CI green (first exercise of the OpenSSL backend switch) --- I work off a self-hosted forge, so this GitHub account is quiet; the configure logs and ninja dirty-node traces from the investigation are available if anyone wants the raw data. (AI-assisted)
1.9 KiB
Vendored
Generated
c, SPDX-License-Identifier, Title, Section, Source, See-also, Protocol, Added-in
| c | SPDX-License-Identifier | Title | Section | Source | See-also | Protocol | Added-in | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al. | curl | libcurl-share | 3 | libcurl |
|
|
n/a |
NAME
libcurl-share - how to use the share interface
DESCRIPTION
This is an overview on how to use the libcurl share interface in your C programs. There are specific man pages for each function mentioned in here.
All functions in the share interface are prefixed with curl_share.
OBJECTIVES
The share interface was added to enable sharing of data between curl handles.
ONE SET OF DATA - MANY TRANSFERS
You can have multiple easy handles share data between them. Have them update and use the same cookie database, DNS cache, TLS session cache and/or connection cache. This way, each single transfer takes advantage from data updates made by the other transfer(s).
SHARE OBJECT
You create a shared object with curl_share_init(3). It returns a handle for a newly created one.
You tell the shared object what data you want it to share by using curl_share_setopt(3).
Since you can use this share from multiple threads, and libcurl has no internal thread synchronization, you must provide mutex callbacks if you are using this multi-threaded. You set lock and unlock functions with curl_share_setopt(3) too.
Then, you make an easy handle to use this share, you set the CURLOPT_SHARE(3) option with curl_easy_setopt(3), and pass in share handle. You can make any number of easy handles share the same share handle.
To make an easy handle stop using that particular share, you set CURLOPT_SHARE(3) to NULL for that easy handle. To make a handle stop sharing a particular data, you can CURLSHOPT_UNSHARE(3) it.
When you are done using the share, make sure that no easy handle is still using it, and call curl_share_cleanup(3) on the handle.