Files
jak-project/third-party/curl/docs/examples/headerapi.c
T
Alexander J. Semenuk 5d5e35fb9b fix: Windows toolchain compatibility (curl 8.21 re-vendor, endless reconfigure loop) (#4355)
## Problem

Windows builds break with a current local toolchain (Scoop LLVM 22.1.8,
CMake 4.4.0, VS 2026), in two independent ways:

1. The build stops at curl's deliberate guard: `#error "no non-blocking
method was found/used/set"` in `third-party/curl/lib/nonblock.c`.
2. From the second configure onward, `cmake --build` re-runs CMake in an
endless loop (observed 42 consecutive reconfigure cycles in a single
build). Likely the same mechanism behind the "endlessly building" VS
2026 note in `docs/setup/dev/vs.md`.

## Root cause

1. `third-party/curl/CMake/CurlTests.c` passes `int *` to
`ioctlsocket()`, whose third parameter is `u_long *`. Clang 22 promotes
`-Wincompatible-pointer-types` to a hard error in C, so the
`HAVE_IOCTLSOCKET_FIONBIO` try_compile silently fails and
`curl_config.h` never defines it. Upstream CI does not see this because
the windows-2022 runner image ships an older LLVM. GCC 14 promotes the
same warning to a hard error, which is very likely the `CurlTests.c.obj`
failure reported from MSYS2 in open-goal/jak-project#3551. Upstream curl
hit the identical problem with GCC 14 and fixed the probe in curl 8.8.0
(curl/curl#13578).
2. The root CMakeLists copies the build tree's `compile_commands.json`
into `<src>/build/` for clangd using `configure_file()`, which registers
its input as a configure dependency. CMake rewrites
`compile_commands.json` late in every generation, after
`CTestTestfile.cmake` and `cmake_install.cmake` (outputs of the same
Ninja regen rule), so once the dependency is registered the rule is
deterministically dirty and every `ninja` invocation re-runs CMake. A
pristine first configure is safe (the file does not exist yet, so the
`if(EXISTS ...)` guard skips the copy), which is why the loop looks
machine- or IDE-specific.

## Fix

1. Per review, re-vendor `third-party/curl` at the `curl-8_21_0` tag
(previously `curl-8_3_0`), which carries the upstream probe fix plus two
years of upstream development; `vendor.yaml` updated to match.
Adjustments the version jump forced:
- curl 8.15 removed the native macOS Secure Transport backend
(`CURL_USE_SECTRANSP`), so macOS now builds curl against OpenSSL like
Linux. The two macOS workflows install Homebrew `openssl@3` and export
`OPENSSL_ROOT_DIR` (keg-only), and the macOS setup docs gained the same
two lines.
- `CURL_BROTLI` / `CURL_ZSTD` switched to AUTO-detection in curl 8.10;
pinned OFF to keep the previous no-compression behavior and avoid
silently linking whatever the CI images happen to have.
- curl's new top-level `BUILD_EXAMPLES` cache option (default ON) leaked
into discord-rpc's identically named option and broke configure at a
nonexistent `examples/send-presence` directory; pinned OFF ahead of the
third-party subdirectories.

The diff is dominated by the mechanical tag-tree swap under
`third-party/curl` (linguist-vendored, collapsed in review). The
hand-written changes are `CMakeLists.txt`, the two macOS workflows,
`docs/setup/system/macos.md`, and `vendor.yaml`.
2. Swap `configure_file()` for `file(COPY ...)`: the same clangd copy
with no configure dependency registered. (`file(COPY_FILE ...
ONLY_IF_DIFFERENT)` would be cleaner still but requires CMake 3.21,
above the declared `cmake_minimum_required(VERSION 3.10)`.)

## Test plan

- [x] Fresh `cmake --preset Release-windows-clang` (LLVM 22, no cache
seeding) completes and logs `Enabled SSL backends: Schannel`; the
FIONBIO probe passes without the previous `#error`
- [x] Full Windows Release build from scratch in the branch worktree
(all 1422 targets)
- [x] goalc-test suite: 1509 passed, 0 failed
- [x] Second consecutive configure with `compile_commands.json` present:
the regen rule in `build.ninja` has no `compile_commands.json` input;
`<src>/build/compile_commands.json` is still refreshed for clangd
- [x] Repeated `ninja` invocations after a full build no longer re-run
CMake
- [x] macOS Intel and ARM CI green (first exercise of the OpenSSL
backend switch)

---

I work off a self-hosted forge, so this GitHub account is quiet; the
configure logs and ninja dirty-node traces from the investigation are
available if anyone wants the raw data.

(AI-assisted)
2026-07-27 19:19:18 -04:00

86 lines
2.6 KiB
C
Vendored
Generated

/***************************************************************************
* _ _ ____ _
* Project ___| | | | _ \| |
* / __| | | | |_) | |
* | (__| |_| | _ <| |___
* \___|\___/|_| \_\_____|
*
* Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
*
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
* are also available at https://curl.se/docs/copyright.html.
*
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
* copies of the Software, and permit persons to whom the Software is
* furnished to do so, under the terms of the COPYING file.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
* SPDX-License-Identifier: curl
*
***************************************************************************/
/* <DESC>
* Extract headers post transfer with the header API
* </DESC>
*/
#include <stdio.h>
#include <curl/curl.h>
static size_t write_cb(char *data, size_t n, size_t l, void *userp)
{
/* take care of the data here, ignored in this example */
(void)data;
(void)userp;
return n * l;
}
int main(void)
{
CURL *curl;
CURLcode result = curl_global_init(CURL_GLOBAL_ALL);
if(result != CURLE_OK)
return (int)result;
curl = curl_easy_init();
if(curl) {
struct curl_header *header;
curl_easy_setopt(curl, CURLOPT_URL, "https://example.com");
/* example.com is redirected, so we tell libcurl to follow redirection */
curl_easy_setopt(curl, CURLOPT_FOLLOWLOCATION, 1L);
/* this example ignores the content */
curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, write_cb);
/* Perform the request, result gets the return code */
result = curl_easy_perform(curl);
/* Check for errors */
if(result != CURLE_OK)
fprintf(stderr, "curl_easy_perform() failed: %s\n",
curl_easy_strerror(result));
if(CURLHE_OK == curl_easy_header(curl, "Content-Type", 0, CURLH_HEADER,
-1, &header))
printf("Got content-type: %s\n", header->value);
printf("All server headers:\n");
{
struct curl_header *h;
struct curl_header *prev = NULL;
do {
h = curl_easy_nextheader(curl, CURLH_HEADER, -1, prev);
if(h)
printf(" %s: %s (%u)\n", h->name, h->value, (unsigned int)h->amount);
prev = h;
} while(h);
}
/* always cleanup */
curl_easy_cleanup(curl);
}
curl_global_cleanup();
return 0;
}