Files
jak-project/third-party/curl/docs/examples/htmltidy.c
T
Alexander J. Semenuk 5d5e35fb9b fix: Windows toolchain compatibility (curl 8.21 re-vendor, endless reconfigure loop) (#4355)
## Problem

Windows builds break with a current local toolchain (Scoop LLVM 22.1.8,
CMake 4.4.0, VS 2026), in two independent ways:

1. The build stops at curl's deliberate guard: `#error "no non-blocking
method was found/used/set"` in `third-party/curl/lib/nonblock.c`.
2. From the second configure onward, `cmake --build` re-runs CMake in an
endless loop (observed 42 consecutive reconfigure cycles in a single
build). Likely the same mechanism behind the "endlessly building" VS
2026 note in `docs/setup/dev/vs.md`.

## Root cause

1. `third-party/curl/CMake/CurlTests.c` passes `int *` to
`ioctlsocket()`, whose third parameter is `u_long *`. Clang 22 promotes
`-Wincompatible-pointer-types` to a hard error in C, so the
`HAVE_IOCTLSOCKET_FIONBIO` try_compile silently fails and
`curl_config.h` never defines it. Upstream CI does not see this because
the windows-2022 runner image ships an older LLVM. GCC 14 promotes the
same warning to a hard error, which is very likely the `CurlTests.c.obj`
failure reported from MSYS2 in open-goal/jak-project#3551. Upstream curl
hit the identical problem with GCC 14 and fixed the probe in curl 8.8.0
(curl/curl#13578).
2. The root CMakeLists copies the build tree's `compile_commands.json`
into `<src>/build/` for clangd using `configure_file()`, which registers
its input as a configure dependency. CMake rewrites
`compile_commands.json` late in every generation, after
`CTestTestfile.cmake` and `cmake_install.cmake` (outputs of the same
Ninja regen rule), so once the dependency is registered the rule is
deterministically dirty and every `ninja` invocation re-runs CMake. A
pristine first configure is safe (the file does not exist yet, so the
`if(EXISTS ...)` guard skips the copy), which is why the loop looks
machine- or IDE-specific.

## Fix

1. Per review, re-vendor `third-party/curl` at the `curl-8_21_0` tag
(previously `curl-8_3_0`), which carries the upstream probe fix plus two
years of upstream development; `vendor.yaml` updated to match.
Adjustments the version jump forced:
- curl 8.15 removed the native macOS Secure Transport backend
(`CURL_USE_SECTRANSP`), so macOS now builds curl against OpenSSL like
Linux. The two macOS workflows install Homebrew `openssl@3` and export
`OPENSSL_ROOT_DIR` (keg-only), and the macOS setup docs gained the same
two lines.
- `CURL_BROTLI` / `CURL_ZSTD` switched to AUTO-detection in curl 8.10;
pinned OFF to keep the previous no-compression behavior and avoid
silently linking whatever the CI images happen to have.
- curl's new top-level `BUILD_EXAMPLES` cache option (default ON) leaked
into discord-rpc's identically named option and broke configure at a
nonexistent `examples/send-presence` directory; pinned OFF ahead of the
third-party subdirectories.

The diff is dominated by the mechanical tag-tree swap under
`third-party/curl` (linguist-vendored, collapsed in review). The
hand-written changes are `CMakeLists.txt`, the two macOS workflows,
`docs/setup/system/macos.md`, and `vendor.yaml`.
2. Swap `configure_file()` for `file(COPY ...)`: the same clangd copy
with no configure dependency registered. (`file(COPY_FILE ...
ONLY_IF_DIFFERENT)` would be cleaner still but requires CMake 3.21,
above the declared `cmake_minimum_required(VERSION 3.10)`.)

## Test plan

- [x] Fresh `cmake --preset Release-windows-clang` (LLVM 22, no cache
seeding) completes and logs `Enabled SSL backends: Schannel`; the
FIONBIO probe passes without the previous `#error`
- [x] Full Windows Release build from scratch in the branch worktree
(all 1422 targets)
- [x] goalc-test suite: 1509 passed, 0 failed
- [x] Second consecutive configure with `compile_commands.json` present:
the regen rule in `build.ninja` has no `compile_commands.json` input;
`<src>/build/compile_commands.json` is still refreshed for clangd
- [x] Repeated `ninja` invocations after a full build no longer re-run
CMake
- [x] macOS Intel and ARM CI green (first exercise of the OpenSSL
backend switch)

---

I work off a self-hosted forge, so this GitHub account is quiet; the
configure logs and ninja dirty-node traces from the investigation are
available if anyone wants the raw data.

(AI-assisted)
2026-07-27 19:19:18 -04:00

139 lines
4.1 KiB
C
Vendored
Generated

/***************************************************************************
* _ _ ____ _
* Project ___| | | | _ \| |
* / __| | | | |_) | |
* | (__| |_| | _ <| |___
* \___|\___/|_| \_\_____|
*
* Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
*
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
* are also available at https://curl.se/docs/copyright.html.
*
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
* copies of the Software, and permit persons to whom the Software is
* furnished to do so, under the terms of the COPYING file.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
* SPDX-License-Identifier: curl
*
***************************************************************************/
/* <DESC>
* Download a document and use libtidy to parse the HTML.
* </DESC>
*/
/*
* LibTidy => https://www.html-tidy.org/
*/
#include <stdio.h>
#include <tidy/tidy.h>
#include <tidy/tidybuffio.h>
#include <curl/curl.h>
/* curl write callback, to fill tidy's input buffer... */
static uint write_cb(char *in, uint size, uint nmemb, TidyBuffer *out)
{
uint r;
r = size * nmemb;
tidyBufAppend(out, in, r);
return r;
}
/* Traverse the document tree */
static void dumpNode(TidyDoc doc, TidyNode tnod, int indent)
{
TidyNode child;
for(child = tidyGetChild(tnod); child; child = tidyGetNext(child)) {
ctmbstr name = tidyNodeGetName(child);
if(name) {
/* if it has a name, then it is an HTML tag ... */
TidyAttr attr;
printf("%*.*s%s ", indent, indent, "<", name);
/* walk the attribute list */
for(attr = tidyAttrFirst(child); attr; attr = tidyAttrNext(attr)) {
printf("%s", tidyAttrName(attr));
tidyAttrValue(attr) ? printf("=\"%s\" ",
tidyAttrValue(attr)) : printf(" ");
}
printf(">\n");
}
else {
/* if it does not have a name, then it is probably text, cdata, etc... */
TidyBuffer buf;
tidyBufInit(&buf);
tidyNodeGetText(doc, child, &buf);
printf("%*.*s\n", indent, indent, buf.bp ? (char *)buf.bp : "");
tidyBufFree(&buf);
}
dumpNode(doc, child, indent + 4); /* recursive */
}
}
int main(int argc, const char **argv)
{
CURL *curl;
char curl_errbuf[CURL_ERROR_SIZE];
TidyDoc tdoc;
TidyBuffer docbuf = { 0 };
TidyBuffer tidy_errbuf = { 0 };
CURLcode result;
if(argc != 2) {
printf("usage: %s <url>\n", argv[0]);
return 1;
}
result = curl_global_init(CURL_GLOBAL_ALL);
if(result != CURLE_OK)
return (int)result;
tdoc = tidyCreate();
tidyOptSetBool(tdoc, TidyForceOutput, yes); /* try harder */
tidyOptSetInt(tdoc, TidyWrapLen, 4096);
tidySetErrorBuffer(tdoc, &tidy_errbuf);
tidyBufInit(&docbuf);
curl = curl_easy_init();
if(curl) {
curl_easy_setopt(curl, CURLOPT_URL, argv[1]);
curl_easy_setopt(curl, CURLOPT_ERRORBUFFER, curl_errbuf);
curl_easy_setopt(curl, CURLOPT_NOPROGRESS, 0L);
curl_easy_setopt(curl, CURLOPT_VERBOSE, 1L);
curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, write_cb);
curl_easy_setopt(curl, CURLOPT_WRITEDATA, &docbuf);
result = curl_easy_perform(curl);
if(result == CURLE_OK) {
result = tidyParseBuffer(tdoc, &docbuf); /* parse the input */
if(result >= 0) {
result = tidyCleanAndRepair(tdoc); /* fix any problems */
if(result >= 0) {
result = tidyRunDiagnostics(tdoc); /* load tidy error buffer */
if(result >= 0) {
dumpNode(tdoc, tidyGetRoot(tdoc), 0); /* walk the tree */
fprintf(stderr, "%s\n", tidy_errbuf.bp); /* show errors */
}
}
}
}
else
fprintf(stderr, "%s\n", curl_errbuf);
/* clean-up */
curl_easy_cleanup(curl);
}
tidyBufFree(&docbuf);
tidyBufFree(&tidy_errbuf);
tidyRelease(tdoc);
curl_global_cleanup();
return (int)result;
}