Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull requests via Christoph:
- handle number of queue changes in the TCP and RDMA drivers
(Daniel Wagner)
- allow changing the number of queues in nvmet (Daniel Wagner)
- also consider host_iface when checking ip options (Daniel
Wagner)
- don't map pages which can't come from HIGHMEM (Fabio M. De
Francesco)
- avoid unnecessary flush bios in nvmet (Guixin Liu)
- shrink and better pack the nvme_iod structure (Keith Busch)
- add comment for unaligned "fake" nqn (Linjun Bao)
- print actual source IP address through sysfs "address" attr
(Martin Belanger)
- various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang)
- handle effects after freeing the request (Keith Busch)
- copy firmware_rev on each init (Keith Busch)
- restrict management ioctls to admin (Keith Busch)
- ensure subsystem reset is single threaded (Keith Busch)
- report the actual number of tagset maps in nvme-pci (Keith
Busch)
- small fabrics authentication fixups (Christoph Hellwig)
- add common code for tagset allocation and freeing (Christoph
Hellwig)
- stop using the request_queue in nvmet (Christoph Hellwig)
- set min_align_mask before calculating max_hw_sectors (Rishabh
Bhatnagar)
- send a rediscover uevent when a persistent discovery controller
reconnects (Sagi Grimberg)
- misc nvmet-tcp fixes (Varun Prakash, zhenwei pi)
- MD pull request via Song:
- Various raid5 fix and clean up, by Logan Gunthorpe and David
Sloan.
- Raid10 performance optimization, by Yu Kuai.
- sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu)
- IO scheduler switching quisce fix (Keith)
- s390/dasd block driver updates (Stefan)
- support for recovery for the ublk driver (ZiyangZhang)
- rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph)
- blk-mq and null_blk map fixes (Bart)
- various bcache fixes (Coly, Jilin, Jules)
- nbd signal hang fix (Shigeru)
- block writeback throttling fix (Yu)
- optimize the passthrough mapping handling (me)
- prepare block cgroups to being gendisk based (Christoph)
- get rid of an old PSI hack in the block layer, moving it to the
callers instead where it belongs (Christoph)
- blk-throttle fixes and cleanups (Yu)
- misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj,
Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming,
Miaohe, Bart, Coly, Gaosheng
* tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits)
sbitmap: fix lockup while swapping
block: add rationale for not using blk_mq_plug() when applicable
block: adapt blk_mq_plug() to not plug for writes that require a zone lock
s390/dasd: use blk_mq_alloc_disk
blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
nvmet: don't look at the request_queue in nvmet_bdev_set_limits
nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
blk-mq: use quiesced elevator switch when reinitializing queues
block: replace blk_queue_nowait with bdev_nowait
nvme: remove nvme_ctrl_init_connect_q
nvme-loop: use the tagset alloc/free helpers
nvme-loop: store the generic nvme_ctrl in set->driver_data
nvme-loop: initialize sqsize later
nvme-fc: use the tagset alloc/free helpers
nvme-fc: store the generic nvme_ctrl in set->driver_data
nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
nvme-rdma: use the tagset alloc/free helpers
nvme-rdma: store the generic nvme_ctrl in set->driver_data
nvme-tcp: use the tagset alloc/free helpers
nvme-tcp: store the generic nvme_ctrl in set->driver_data
...
This commit is contained in:
@@ -132,6 +132,18 @@ struct opal_read_write_table {
|
||||
__u64 priv;
|
||||
};
|
||||
|
||||
#define OPAL_FL_SUPPORTED 0x00000001
|
||||
#define OPAL_FL_LOCKING_SUPPORTED 0x00000002
|
||||
#define OPAL_FL_LOCKING_ENABLED 0x00000004
|
||||
#define OPAL_FL_LOCKED 0x00000008
|
||||
#define OPAL_FL_MBR_ENABLED 0x00000010
|
||||
#define OPAL_FL_MBR_DONE 0x00000020
|
||||
|
||||
struct opal_status {
|
||||
__u32 flags;
|
||||
__u32 reserved;
|
||||
};
|
||||
|
||||
#define IOC_OPAL_SAVE _IOW('p', 220, struct opal_lock_unlock)
|
||||
#define IOC_OPAL_LOCK_UNLOCK _IOW('p', 221, struct opal_lock_unlock)
|
||||
#define IOC_OPAL_TAKE_OWNERSHIP _IOW('p', 222, struct opal_key)
|
||||
@@ -148,5 +160,6 @@ struct opal_read_write_table {
|
||||
#define IOC_OPAL_MBR_DONE _IOW('p', 233, struct opal_mbr_done)
|
||||
#define IOC_OPAL_WRITE_SHADOW_MBR _IOW('p', 234, struct opal_shadow_mbr)
|
||||
#define IOC_OPAL_GENERIC_TABLE_RW _IOW('p', 235, struct opal_read_write_table)
|
||||
#define IOC_OPAL_GET_STATUS _IOR('p', 236, struct opal_status)
|
||||
|
||||
#endif /* _UAPI_SED_OPAL_H */
|
||||
|
||||
@@ -17,7 +17,8 @@
|
||||
#define UBLK_CMD_STOP_DEV 0x07
|
||||
#define UBLK_CMD_SET_PARAMS 0x08
|
||||
#define UBLK_CMD_GET_PARAMS 0x09
|
||||
|
||||
#define UBLK_CMD_START_USER_RECOVERY 0x10
|
||||
#define UBLK_CMD_END_USER_RECOVERY 0x11
|
||||
/*
|
||||
* IO commands, issued by ublk server, and handled by ublk driver.
|
||||
*
|
||||
@@ -74,9 +75,14 @@
|
||||
*/
|
||||
#define UBLK_F_NEED_GET_DATA (1UL << 2)
|
||||
|
||||
#define UBLK_F_USER_RECOVERY (1UL << 3)
|
||||
|
||||
#define UBLK_F_USER_RECOVERY_REISSUE (1UL << 4)
|
||||
|
||||
/* device state */
|
||||
#define UBLK_S_DEV_DEAD 0
|
||||
#define UBLK_S_DEV_LIVE 1
|
||||
#define UBLK_S_DEV_QUIESCED 2
|
||||
|
||||
/* shipped via sqe->cmd of io_uring command */
|
||||
struct ublksrv_ctrl_cmd {
|
||||
|
||||
Reference in New Issue
Block a user