From 745fd50f3b044db6a3922e1718306555613164b0 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 31 Jan 2018 12:04:50 +0100 Subject: [PATCH 01/25] drm/cirrus: Load lut in crtc_commit In the past the ast driver relied upon the fbdev emulation helpers to call ->load_lut at boot-up. But since commit b8e2b0199cc377617dc238f5106352c06dcd3fa2 Author: Peter Rosin Date: Tue Jul 4 12:36:57 2017 +0200 drm/fb-helper: factor out pseudo-palette that's cleaned up and drivers are expected to boot into a consistent lut state. This patch fixes that. Fixes: b8e2b0199cc3 ("drm/fb-helper: factor out pseudo-palette") Cc: Peter Rosin Cc: Daniel Vetter Cc: # v4.14+ References: https://bugzilla.kernel.org/show_bug.cgi?id=198123 Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20180131110450.22153-1-daniel.vetter@ffwll.ch Signed-off-by: Gerd Hoffmann --- drivers/gpu/drm/cirrus/cirrus_mode.c | 40 ++++++++++++++++------------ 1 file changed, 23 insertions(+), 17 deletions(-) diff --git a/drivers/gpu/drm/cirrus/cirrus_mode.c b/drivers/gpu/drm/cirrus/cirrus_mode.c index cd23b1b28259..c91b9b054e3f 100644 --- a/drivers/gpu/drm/cirrus/cirrus_mode.c +++ b/drivers/gpu/drm/cirrus/cirrus_mode.c @@ -294,22 +294,7 @@ static void cirrus_crtc_prepare(struct drm_crtc *crtc) { } -/* - * This is called after a mode is programmed. It should reverse anything done - * by the prepare function - */ -static void cirrus_crtc_commit(struct drm_crtc *crtc) -{ -} - -/* - * The core can pass us a set of gamma values to program. We actually only - * use this for 8-bit mode so can't perform smooth fades on deeper modes, - * but it's a requirement that we provide the function - */ -static int cirrus_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, - u16 *blue, uint32_t size, - struct drm_modeset_acquire_ctx *ctx) +static void cirrus_crtc_load_lut(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct cirrus_device *cdev = dev->dev_private; @@ -317,7 +302,7 @@ static int cirrus_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, int i; if (!crtc->enabled) - return 0; + return; r = crtc->gamma_store; g = r + crtc->gamma_size; @@ -330,6 +315,27 @@ static int cirrus_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, WREG8(PALETTE_DATA, *g++ >> 8); WREG8(PALETTE_DATA, *b++ >> 8); } +} + +/* + * This is called after a mode is programmed. It should reverse anything done + * by the prepare function + */ +static void cirrus_crtc_commit(struct drm_crtc *crtc) +{ + cirrus_crtc_load_lut(crtc); +} + +/* + * The core can pass us a set of gamma values to program. We actually only + * use this for 8-bit mode so can't perform smooth fades on deeper modes, + * but it's a requirement that we provide the function + */ +static int cirrus_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, + u16 *blue, uint32_t size, + struct drm_modeset_acquire_ctx *ctx) +{ + cirrus_crtc_load_lut(crtc); return 0; } From 54f809cfbd6b4a43959039f5d33596ed3297ce16 Mon Sep 17 00:00:00 2001 From: "Leo (Sunpeng) Li" Date: Wed, 17 Jan 2018 12:51:08 +0100 Subject: [PATCH 02/25] drm/atomic: Fix memleak on ERESTARTSYS during non-blocking commits During a non-blocking commit, it is possible to return before the commit_tail work is queued (-ERESTARTSYS, for example). Since a reference on the crtc commit object is obtained for the pending vblank event when preparing the commit, the above situation will leave us with an extra reference. Therefore, if the commit_tail worker has not consumed the event at the end of a commit, release it's reference. Changes since v1: - Also check for state->event->base.completion being set, to handle the case where stall_checks() fails in setup_crtc_commit(). Changes since v2: - Add a flag to drm_crtc_commit, to prevent dereferencing a freed event. i915 may unreference the state in a worker. Fixes: 24835e442f28 ("drm: reference count event->completion") Cc: # v4.11+ Signed-off-by: Leo (Sunpeng) Li Acked-by: Harry Wentland #v1 Signed-off-by: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/20180117115108.29608-1-maarten.lankhorst@linux.intel.com Reviewed-by: Sean Paul --- drivers/gpu/drm/drm_atomic_helper.c | 15 +++++++++++++++ include/drm/drm_atomic.h | 9 +++++++++ 2 files changed, 24 insertions(+) diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index b16f1d69a0bb..e8c249361d7e 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -1778,6 +1778,8 @@ int drm_atomic_helper_setup_commit(struct drm_atomic_state *state, new_crtc_state->event->base.completion = &commit->flip_done; new_crtc_state->event->base.completion_release = release_crtc_commit; drm_crtc_commit_get(commit); + + commit->abort_completion = true; } for_each_oldnew_connector_in_state(state, conn, old_conn_state, new_conn_state, i) { @@ -3327,8 +3329,21 @@ EXPORT_SYMBOL(drm_atomic_helper_crtc_duplicate_state); void __drm_atomic_helper_crtc_destroy_state(struct drm_crtc_state *state) { if (state->commit) { + /* + * In the event that a non-blocking commit returns + * -ERESTARTSYS before the commit_tail work is queued, we will + * have an extra reference to the commit object. Release it, if + * the event has not been consumed by the worker. + * + * state->event may be freed, so we can't directly look at + * state->event->base.completion. + */ + if (state->event && state->commit->abort_completion) + drm_crtc_commit_put(state->commit); + kfree(state->commit->event); state->commit->event = NULL; + drm_crtc_commit_put(state->commit); } diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h index 5afd6e364fb6..c63b0b48e884 100644 --- a/include/drm/drm_atomic.h +++ b/include/drm/drm_atomic.h @@ -134,6 +134,15 @@ struct drm_crtc_commit { * &drm_pending_vblank_event pointer to clean up private events. */ struct drm_pending_vblank_event *event; + + /** + * @abort_completion: + * + * A flag that's set after drm_atomic_helper_setup_commit takes a second + * reference for the completion of $drm_crtc_state.event. It's used by + * the free code to remove the second reference if commit fails. + */ + bool abort_completion; }; struct __drm_planes_state { From ac66b8347bbad5913df098e5281fa6e2c7fc796e Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 14 Feb 2018 18:45:59 +0000 Subject: [PATCH 03/25] gpu: ipu-v3: make const arrays int_reg static, shrinks object size Don't populate the const read-only arrays int_reg on the stack but instead make them static. Makes the object code smaller by over 80 bytes: Before: text data bss dec hex filename 28024 8936 192 37152 9120 drivers/gpu/ipu-v3/ipu-common.o After: text data bss dec hex filename 27794 9080 192 37066 90ca drivers/gpu/ipu-v3/ipu-common.o (gcc version 7.2.0 x86_64) Signed-off-by: Colin Ian King Signed-off-by: Philipp Zabel --- drivers/gpu/ipu-v3/ipu-common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/ipu-v3/ipu-common.c b/drivers/gpu/ipu-v3/ipu-common.c index 658fa2d3e40c..48685cddbad1 100644 --- a/drivers/gpu/ipu-v3/ipu-common.c +++ b/drivers/gpu/ipu-v3/ipu-common.c @@ -1089,7 +1089,7 @@ static void ipu_irq_handler(struct irq_desc *desc) { struct ipu_soc *ipu = irq_desc_get_handler_data(desc); struct irq_chip *chip = irq_desc_get_chip(desc); - const int int_reg[] = { 0, 1, 2, 3, 10, 11, 12, 13, 14}; + static const int int_reg[] = { 0, 1, 2, 3, 10, 11, 12, 13, 14}; chained_irq_enter(chip, desc); @@ -1102,7 +1102,7 @@ static void ipu_err_irq_handler(struct irq_desc *desc) { struct ipu_soc *ipu = irq_desc_get_handler_data(desc); struct irq_chip *chip = irq_desc_get_chip(desc); - const int int_reg[] = { 4, 5, 8, 9}; + static const int int_reg[] = { 4, 5, 8, 9}; chained_irq_enter(chip, desc); From 6d36b7fec60e6f74a15ce4781d30b2aecce85dfc Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 22 Jan 2018 16:06:16 +0100 Subject: [PATCH 04/25] gpu: ipu-cpmem: add 8-bit grayscale support to ipu_cpmem_set_image Add the missing offset calculation for grayscale images. Since the IPU only supports capturing greyscale in raw passthrough mode, it is the same as 8-bit bayer formats. Signed-off-by: Philipp Zabel --- drivers/gpu/ipu-v3/ipu-cpmem.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/ipu-v3/ipu-cpmem.c b/drivers/gpu/ipu-v3/ipu-cpmem.c index bb9c087e6c0d..ef32377b91c0 100644 --- a/drivers/gpu/ipu-v3/ipu-cpmem.c +++ b/drivers/gpu/ipu-v3/ipu-cpmem.c @@ -788,6 +788,7 @@ int ipu_cpmem_set_image(struct ipuv3_channel *ch, struct ipu_image *image) case V4L2_PIX_FMT_SGBRG8: case V4L2_PIX_FMT_SGRBG8: case V4L2_PIX_FMT_SRGGB8: + case V4L2_PIX_FMT_GREY: offset = image->rect.left + image->rect.top * pix->bytesperline; break; case V4L2_PIX_FMT_SBGGR16: From 27d4ee03078aba88c5e07dcc4917e8d01d046f38 Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Sun, 11 Feb 2018 10:38:28 +0100 Subject: [PATCH 05/25] workqueue: Allow retrieval of current task's work struct Introduce a helper to retrieve the current task's work struct if it is a workqueue worker. This allows us to fix a long-standing deadlock in several DRM drivers wherein the ->runtime_suspend callback waits for a specific worker to finish and that worker in turn calls a function which waits for runtime suspend to finish. That function is invoked from multiple call sites and waiting for runtime suspend to finish is the correct thing to do except if it's executing in the context of the worker. Cc: Lai Jiangshan Cc: Dave Airlie Cc: Ben Skeggs Cc: Alex Deucher Acked-by: Tejun Heo Reviewed-by: Lyude Paul Signed-off-by: Lukas Wunner Link: https://patchwork.freedesktop.org/patch/msgid/2d8f603074131eb87e588d2b803a71765bd3a2fd.1518338788.git.lukas@wunner.de --- include/linux/workqueue.h | 1 + kernel/workqueue.c | 16 ++++++++++++++++ 2 files changed, 17 insertions(+) diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h index 4a54ef96aff5..bc0cda180c8b 100644 --- a/include/linux/workqueue.h +++ b/include/linux/workqueue.h @@ -465,6 +465,7 @@ extern bool cancel_delayed_work_sync(struct delayed_work *dwork); extern void workqueue_set_max_active(struct workqueue_struct *wq, int max_active); +extern struct work_struct *current_work(void); extern bool current_is_workqueue_rescuer(void); extern bool workqueue_congested(int cpu, struct workqueue_struct *wq); extern unsigned int work_busy(struct work_struct *work); diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 43d18cb46308..255c20efdf7b 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -4167,6 +4167,22 @@ void workqueue_set_max_active(struct workqueue_struct *wq, int max_active) } EXPORT_SYMBOL_GPL(workqueue_set_max_active); +/** + * current_work - retrieve %current task's work struct + * + * Determine if %current task is a workqueue worker and what it's working on. + * Useful to find out the context that the %current task is running in. + * + * Return: work struct if %current task is a workqueue worker, %NULL otherwise. + */ +struct work_struct *current_work(void) +{ + struct worker *worker = current_wq_worker(); + + return worker ? worker->current_work : NULL; +} +EXPORT_SYMBOL(current_work); + /** * current_is_workqueue_rescuer - is %current workqueue rescuer? * From 25c058ccaf2ebbc3e250ec1e199e161f91fe27d4 Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Wed, 14 Feb 2018 06:41:25 +0100 Subject: [PATCH 06/25] drm: Allow determining if current task is output poll worker Introduce a helper to determine if the current task is an output poll worker. This allows us to fix a long-standing deadlock in several DRM drivers wherein the ->runtime_suspend callback waits for the output poll worker to finish and the worker in turn calls a ->detect callback which waits for runtime suspend to finish. The ->detect callback is invoked from multiple call sites and waiting for runtime suspend to finish is the correct thing to do except if it's executing in the context of the worker. v2: Expand kerneldoc to specifically mention deadlock between output poll worker and autosuspend worker as use case. (Lyude) Cc: Dave Airlie Cc: Ben Skeggs Cc: Alex Deucher Reviewed-by: Lyude Paul Signed-off-by: Lukas Wunner Link: https://patchwork.freedesktop.org/patch/msgid/3549ce32e7f1467102e70d3e9cbf70c46bfe108e.1518593424.git.lukas@wunner.de --- drivers/gpu/drm/drm_probe_helper.c | 20 ++++++++++++++++++++ include/drm/drm_crtc_helper.h | 1 + 2 files changed, 21 insertions(+) diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c index 6dc2dde5b672..7a6b2dc08913 100644 --- a/drivers/gpu/drm/drm_probe_helper.c +++ b/drivers/gpu/drm/drm_probe_helper.c @@ -654,6 +654,26 @@ out: schedule_delayed_work(delayed_work, DRM_OUTPUT_POLL_PERIOD); } +/** + * drm_kms_helper_is_poll_worker - is %current task an output poll worker? + * + * Determine if %current task is an output poll worker. This can be used + * to select distinct code paths for output polling versus other contexts. + * + * One use case is to avoid a deadlock between the output poll worker and + * the autosuspend worker wherein the latter waits for polling to finish + * upon calling drm_kms_helper_poll_disable(), while the former waits for + * runtime suspend to finish upon calling pm_runtime_get_sync() in a + * connector ->detect hook. + */ +bool drm_kms_helper_is_poll_worker(void) +{ + struct work_struct *work = current_work(); + + return work && work->func == output_poll_execute; +} +EXPORT_SYMBOL(drm_kms_helper_is_poll_worker); + /** * drm_kms_helper_poll_disable - disable output polling * @dev: drm_device diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h index 76e237bd989b..6914633037a5 100644 --- a/include/drm/drm_crtc_helper.h +++ b/include/drm/drm_crtc_helper.h @@ -77,5 +77,6 @@ void drm_kms_helper_hotplug_event(struct drm_device *dev); void drm_kms_helper_poll_disable(struct drm_device *dev); void drm_kms_helper_poll_enable(struct drm_device *dev); +bool drm_kms_helper_is_poll_worker(void); #endif From d61a5c1063515e855bedb1b81e20e50b0ac3541e Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Sun, 11 Feb 2018 10:38:28 +0100 Subject: [PATCH 07/25] drm/nouveau: Fix deadlock on runtime suspend nouveau's ->runtime_suspend hook calls drm_kms_helper_poll_disable(), which waits for the output poll worker to finish if it's running. The output poll worker meanwhile calls pm_runtime_get_sync() in nouveau_connector_detect() which waits for the ongoing suspend to finish, causing a deadlock. Fix by not acquiring a runtime PM ref if nouveau_connector_detect() is called in the output poll worker's context. This is safe because the poll worker is only enabled while runtime active and we know that ->runtime_suspend waits for it to finish. Other contexts calling nouveau_connector_detect() do require a runtime PM ref, these comprise: status_store() drm sysfs interface ->fill_modes drm callback drm_fb_helper_probe_connector_modes() drm_mode_getconnector() nouveau_connector_hotplug() nouveau_display_hpd_work() nv17_tv_set_property() Stack trace for posterity: INFO: task kworker/0:1:58 blocked for more than 120 seconds. Workqueue: events output_poll_execute [drm_kms_helper] Call Trace: schedule+0x28/0x80 rpm_resume+0x107/0x6e0 __pm_runtime_resume+0x47/0x70 nouveau_connector_detect+0x7e/0x4a0 [nouveau] nouveau_connector_detect_lvds+0x132/0x180 [nouveau] drm_helper_probe_detect_ctx+0x85/0xd0 [drm_kms_helper] output_poll_execute+0x11e/0x1c0 [drm_kms_helper] process_one_work+0x184/0x380 worker_thread+0x2e/0x390 INFO: task kworker/0:2:252 blocked for more than 120 seconds. Workqueue: pm pm_runtime_work Call Trace: schedule+0x28/0x80 schedule_timeout+0x1e3/0x370 wait_for_completion+0x123/0x190 flush_work+0x142/0x1c0 nouveau_pmops_runtime_suspend+0x7e/0xd0 [nouveau] pci_pm_runtime_suspend+0x5c/0x180 vga_switcheroo_runtime_suspend+0x1e/0xa0 __rpm_callback+0xc1/0x200 rpm_callback+0x1f/0x70 rpm_suspend+0x13c/0x640 pm_runtime_work+0x6e/0x90 process_one_work+0x184/0x380 worker_thread+0x2e/0x390 Bugzilla: https://bugs.archlinux.org/task/53497 Bugzilla: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=870523 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70388#c33 Fixes: 5addcf0a5f0f ("nouveau: add runtime PM support (v0.9)") Cc: stable@vger.kernel.org # v3.12+: 27d4ee03078a: workqueue: Allow retrieval of current task's work struct Cc: stable@vger.kernel.org # v3.12+: 25c058ccaf2e: drm: Allow determining if current task is output poll worker Cc: Ben Skeggs Cc: Dave Airlie Reviewed-by: Lyude Paul Signed-off-by: Lukas Wunner Link: https://patchwork.freedesktop.org/patch/msgid/b7d2cbb609a80f59ccabfdf479b9d5907c603ea1.1518338789.git.lukas@wunner.de --- drivers/gpu/drm/nouveau/nouveau_connector.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 69d6e61a01ec..6ed9cb053dfa 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -570,9 +570,15 @@ nouveau_connector_detect(struct drm_connector *connector, bool force) nv_connector->edid = NULL; } - ret = pm_runtime_get_sync(connector->dev->dev); - if (ret < 0 && ret != -EACCES) - return conn_status; + /* Outputs are only polled while runtime active, so acquiring a + * runtime PM ref here is unnecessary (and would deadlock upon + * runtime suspend because it waits for polling to finish). + */ + if (!drm_kms_helper_is_poll_worker()) { + ret = pm_runtime_get_sync(connector->dev->dev); + if (ret < 0 && ret != -EACCES) + return conn_status; + } nv_encoder = nouveau_connector_ddc_detect(connector); if (nv_encoder && (i2c = nv_encoder->i2c) != NULL) { @@ -647,8 +653,10 @@ detect_analog: out: - pm_runtime_mark_last_busy(connector->dev->dev); - pm_runtime_put_autosuspend(connector->dev->dev); + if (!drm_kms_helper_is_poll_worker()) { + pm_runtime_mark_last_busy(connector->dev->dev); + pm_runtime_put_autosuspend(connector->dev->dev); + } return conn_status; } From 15734feff2bdac24aa3266c437cffa42851990e3 Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Sun, 11 Feb 2018 10:38:28 +0100 Subject: [PATCH 08/25] drm/radeon: Fix deadlock on runtime suspend radeon's ->runtime_suspend hook calls drm_kms_helper_poll_disable(), which waits for the output poll worker to finish if it's running. The output poll worker meanwhile calls pm_runtime_get_sync() in radeon's ->detect hooks, which waits for the ongoing suspend to finish, causing a deadlock. Fix by not acquiring a runtime PM ref if the ->detect hooks are called in the output poll worker's context. This is safe because the poll worker is only enabled while runtime active and we know that ->runtime_suspend waits for it to finish. Stack trace for posterity: INFO: task kworker/0:3:31847 blocked for more than 120 seconds Workqueue: events output_poll_execute [drm_kms_helper] Call Trace: schedule+0x3c/0x90 rpm_resume+0x1e2/0x690 __pm_runtime_resume+0x3f/0x60 radeon_lvds_detect+0x39/0xf0 [radeon] output_poll_execute+0xda/0x1e0 [drm_kms_helper] process_one_work+0x14b/0x440 worker_thread+0x48/0x4a0 INFO: task kworker/2:0:10493 blocked for more than 120 seconds. Workqueue: pm pm_runtime_work Call Trace: schedule+0x3c/0x90 schedule_timeout+0x1b3/0x240 wait_for_common+0xc2/0x180 wait_for_completion+0x1d/0x20 flush_work+0xfc/0x1a0 __cancel_work_timer+0xa5/0x1d0 cancel_delayed_work_sync+0x13/0x20 drm_kms_helper_poll_disable+0x1f/0x30 [drm_kms_helper] radeon_pmops_runtime_suspend+0x3d/0xa0 [radeon] pci_pm_runtime_suspend+0x61/0x1a0 vga_switcheroo_runtime_suspend+0x21/0x70 __rpm_callback+0x32/0x70 rpm_callback+0x24/0x80 rpm_suspend+0x12b/0x640 pm_runtime_work+0x6f/0xb0 process_one_work+0x14b/0x440 worker_thread+0x48/0x4a0 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94147 Fixes: 10ebc0bc0934 ("drm/radeon: add runtime PM support (v2)") Cc: stable@vger.kernel.org # v3.13+: 27d4ee03078a: workqueue: Allow retrieval of current task's work struct Cc: stable@vger.kernel.org # v3.13+: 25c058ccaf2e: drm: Allow determining if current task is output poll worker Cc: Ismo Toijala Cc: Alex Deucher Cc: Dave Airlie Reviewed-by: Lyude Paul Signed-off-by: Lukas Wunner Link: https://patchwork.freedesktop.org/patch/msgid/64ea02c44f91dda19bc563902b97bbc699040392.1518338789.git.lukas@wunner.de --- drivers/gpu/drm/radeon/radeon_connectors.c | 74 ++++++++++++++-------- 1 file changed, 49 insertions(+), 25 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 59dcefb2df3b..30e129684c7c 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -900,9 +900,11 @@ radeon_lvds_detect(struct drm_connector *connector, bool force) enum drm_connector_status ret = connector_status_disconnected; int r; - r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) - return connector_status_disconnected; + if (!drm_kms_helper_is_poll_worker()) { + r = pm_runtime_get_sync(connector->dev->dev); + if (r < 0) + return connector_status_disconnected; + } if (encoder) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); @@ -925,8 +927,12 @@ radeon_lvds_detect(struct drm_connector *connector, bool force) /* check acpi lid status ??? */ radeon_connector_update_scratch_regs(connector, ret); - pm_runtime_mark_last_busy(connector->dev->dev); - pm_runtime_put_autosuspend(connector->dev->dev); + + if (!drm_kms_helper_is_poll_worker()) { + pm_runtime_mark_last_busy(connector->dev->dev); + pm_runtime_put_autosuspend(connector->dev->dev); + } + return ret; } @@ -1040,9 +1046,11 @@ radeon_vga_detect(struct drm_connector *connector, bool force) enum drm_connector_status ret = connector_status_disconnected; int r; - r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) - return connector_status_disconnected; + if (!drm_kms_helper_is_poll_worker()) { + r = pm_runtime_get_sync(connector->dev->dev); + if (r < 0) + return connector_status_disconnected; + } encoder = radeon_best_single_encoder(connector); if (!encoder) @@ -1109,8 +1117,10 @@ radeon_vga_detect(struct drm_connector *connector, bool force) radeon_connector_update_scratch_regs(connector, ret); out: - pm_runtime_mark_last_busy(connector->dev->dev); - pm_runtime_put_autosuspend(connector->dev->dev); + if (!drm_kms_helper_is_poll_worker()) { + pm_runtime_mark_last_busy(connector->dev->dev); + pm_runtime_put_autosuspend(connector->dev->dev); + } return ret; } @@ -1174,9 +1184,11 @@ radeon_tv_detect(struct drm_connector *connector, bool force) if (!radeon_connector->dac_load_detect) return ret; - r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) - return connector_status_disconnected; + if (!drm_kms_helper_is_poll_worker()) { + r = pm_runtime_get_sync(connector->dev->dev); + if (r < 0) + return connector_status_disconnected; + } encoder = radeon_best_single_encoder(connector); if (!encoder) @@ -1188,8 +1200,12 @@ radeon_tv_detect(struct drm_connector *connector, bool force) if (ret == connector_status_connected) ret = radeon_connector_analog_encoder_conflict_solve(connector, encoder, ret, false); radeon_connector_update_scratch_regs(connector, ret); - pm_runtime_mark_last_busy(connector->dev->dev); - pm_runtime_put_autosuspend(connector->dev->dev); + + if (!drm_kms_helper_is_poll_worker()) { + pm_runtime_mark_last_busy(connector->dev->dev); + pm_runtime_put_autosuspend(connector->dev->dev); + } + return ret; } @@ -1252,9 +1268,11 @@ radeon_dvi_detect(struct drm_connector *connector, bool force) enum drm_connector_status ret = connector_status_disconnected; bool dret = false, broken_edid = false; - r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) - return connector_status_disconnected; + if (!drm_kms_helper_is_poll_worker()) { + r = pm_runtime_get_sync(connector->dev->dev); + if (r < 0) + return connector_status_disconnected; + } if (radeon_connector->detected_hpd_without_ddc) { force = true; @@ -1437,8 +1455,10 @@ out: } exit: - pm_runtime_mark_last_busy(connector->dev->dev); - pm_runtime_put_autosuspend(connector->dev->dev); + if (!drm_kms_helper_is_poll_worker()) { + pm_runtime_mark_last_busy(connector->dev->dev); + pm_runtime_put_autosuspend(connector->dev->dev); + } return ret; } @@ -1689,9 +1709,11 @@ radeon_dp_detect(struct drm_connector *connector, bool force) if (radeon_dig_connector->is_mst) return connector_status_disconnected; - r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) - return connector_status_disconnected; + if (!drm_kms_helper_is_poll_worker()) { + r = pm_runtime_get_sync(connector->dev->dev); + if (r < 0) + return connector_status_disconnected; + } if (!force && radeon_check_hpd_status_unchanged(connector)) { ret = connector->status; @@ -1778,8 +1800,10 @@ radeon_dp_detect(struct drm_connector *connector, bool force) } out: - pm_runtime_mark_last_busy(connector->dev->dev); - pm_runtime_put_autosuspend(connector->dev->dev); + if (!drm_kms_helper_is_poll_worker()) { + pm_runtime_mark_last_busy(connector->dev->dev); + pm_runtime_put_autosuspend(connector->dev->dev); + } return ret; } From aa0aad57909eb321746325951d66af88a83bc956 Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Sun, 11 Feb 2018 10:38:28 +0100 Subject: [PATCH 09/25] drm/amdgpu: Fix deadlock on runtime suspend amdgpu's ->runtime_suspend hook calls drm_kms_helper_poll_disable(), which waits for the output poll worker to finish if it's running. The output poll worker meanwhile calls pm_runtime_get_sync() in amdgpu's ->detect hooks, which waits for the ongoing suspend to finish, causing a deadlock. Fix by not acquiring a runtime PM ref if the ->detect hooks are called in the output poll worker's context. This is safe because the poll worker is only enabled while runtime active and we know that ->runtime_suspend waits for it to finish. Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)") Cc: stable@vger.kernel.org # v4.2+: 27d4ee03078a: workqueue: Allow retrieval of current task's work struct Cc: stable@vger.kernel.org # v4.2+: 25c058ccaf2e: drm: Allow determining if current task is output poll worker Cc: Alex Deucher Tested-by: Mike Lothian Reviewed-by: Lyude Paul Signed-off-by: Lukas Wunner Link: https://patchwork.freedesktop.org/patch/msgid/4c9bf72aacae1eef062bd134cd112e0770a7f121.1518338789.git.lukas@wunner.de --- .../gpu/drm/amd/amdgpu/amdgpu_connectors.c | 58 ++++++++++++------- 1 file changed, 38 insertions(+), 20 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c index df9cbc78e168..21e7ae159dff 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c @@ -737,9 +737,11 @@ amdgpu_connector_lvds_detect(struct drm_connector *connector, bool force) enum drm_connector_status ret = connector_status_disconnected; int r; - r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) - return connector_status_disconnected; + if (!drm_kms_helper_is_poll_worker()) { + r = pm_runtime_get_sync(connector->dev->dev); + if (r < 0) + return connector_status_disconnected; + } if (encoder) { struct amdgpu_encoder *amdgpu_encoder = to_amdgpu_encoder(encoder); @@ -758,8 +760,12 @@ amdgpu_connector_lvds_detect(struct drm_connector *connector, bool force) /* check acpi lid status ??? */ amdgpu_connector_update_scratch_regs(connector, ret); - pm_runtime_mark_last_busy(connector->dev->dev); - pm_runtime_put_autosuspend(connector->dev->dev); + + if (!drm_kms_helper_is_poll_worker()) { + pm_runtime_mark_last_busy(connector->dev->dev); + pm_runtime_put_autosuspend(connector->dev->dev); + } + return ret; } @@ -869,9 +875,11 @@ amdgpu_connector_vga_detect(struct drm_connector *connector, bool force) enum drm_connector_status ret = connector_status_disconnected; int r; - r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) - return connector_status_disconnected; + if (!drm_kms_helper_is_poll_worker()) { + r = pm_runtime_get_sync(connector->dev->dev); + if (r < 0) + return connector_status_disconnected; + } encoder = amdgpu_connector_best_single_encoder(connector); if (!encoder) @@ -925,8 +933,10 @@ amdgpu_connector_vga_detect(struct drm_connector *connector, bool force) amdgpu_connector_update_scratch_regs(connector, ret); out: - pm_runtime_mark_last_busy(connector->dev->dev); - pm_runtime_put_autosuspend(connector->dev->dev); + if (!drm_kms_helper_is_poll_worker()) { + pm_runtime_mark_last_busy(connector->dev->dev); + pm_runtime_put_autosuspend(connector->dev->dev); + } return ret; } @@ -989,9 +999,11 @@ amdgpu_connector_dvi_detect(struct drm_connector *connector, bool force) enum drm_connector_status ret = connector_status_disconnected; bool dret = false, broken_edid = false; - r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) - return connector_status_disconnected; + if (!drm_kms_helper_is_poll_worker()) { + r = pm_runtime_get_sync(connector->dev->dev); + if (r < 0) + return connector_status_disconnected; + } if (!force && amdgpu_connector_check_hpd_status_unchanged(connector)) { ret = connector->status; @@ -1116,8 +1128,10 @@ out: amdgpu_connector_update_scratch_regs(connector, ret); exit: - pm_runtime_mark_last_busy(connector->dev->dev); - pm_runtime_put_autosuspend(connector->dev->dev); + if (!drm_kms_helper_is_poll_worker()) { + pm_runtime_mark_last_busy(connector->dev->dev); + pm_runtime_put_autosuspend(connector->dev->dev); + } return ret; } @@ -1360,9 +1374,11 @@ amdgpu_connector_dp_detect(struct drm_connector *connector, bool force) struct drm_encoder *encoder = amdgpu_connector_best_single_encoder(connector); int r; - r = pm_runtime_get_sync(connector->dev->dev); - if (r < 0) - return connector_status_disconnected; + if (!drm_kms_helper_is_poll_worker()) { + r = pm_runtime_get_sync(connector->dev->dev); + if (r < 0) + return connector_status_disconnected; + } if (!force && amdgpu_connector_check_hpd_status_unchanged(connector)) { ret = connector->status; @@ -1430,8 +1446,10 @@ amdgpu_connector_dp_detect(struct drm_connector *connector, bool force) amdgpu_connector_update_scratch_regs(connector, ret); out: - pm_runtime_mark_last_busy(connector->dev->dev); - pm_runtime_put_autosuspend(connector->dev->dev); + if (!drm_kms_helper_is_poll_worker()) { + pm_runtime_mark_last_busy(connector->dev->dev); + pm_runtime_put_autosuspend(connector->dev->dev); + } return ret; } From c795f3052b60b01e80485fad98c53e5e67d093c9 Mon Sep 17 00:00:00 2001 From: Tobias Jordan Date: Thu, 15 Feb 2018 15:34:55 +0100 Subject: [PATCH 10/25] gpu: ipu-v3: pre: fix device node leak in ipu_pre_lookup_by_phandle Before returning, call of_node_put() for the device node returned by of_parse_phandle(). Fixes: d2a34232580a ("gpu: ipu-v3: add driver for Prefetch Resolve Engine") Signed-off-by: Tobias Jordan Signed-off-by: Philipp Zabel --- drivers/gpu/ipu-v3/ipu-pre.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/ipu-v3/ipu-pre.c b/drivers/gpu/ipu-v3/ipu-pre.c index f1cec3d70498..0f70e8847540 100644 --- a/drivers/gpu/ipu-v3/ipu-pre.c +++ b/drivers/gpu/ipu-v3/ipu-pre.c @@ -129,11 +129,14 @@ ipu_pre_lookup_by_phandle(struct device *dev, const char *name, int index) if (pre_node == pre->dev->of_node) { mutex_unlock(&ipu_pre_list_mutex); device_link_add(dev, pre->dev, DL_FLAG_AUTOREMOVE); + of_node_put(pre_node); return pre; } } mutex_unlock(&ipu_pre_list_mutex); + of_node_put(pre_node); + return NULL; } From 3addaba8141bc6a4f649a48f46e552af32922147 Mon Sep 17 00:00:00 2001 From: Tobias Jordan Date: Thu, 15 Feb 2018 15:35:30 +0100 Subject: [PATCH 11/25] gpu: ipu-v3: prg: fix device node leak in ipu_prg_lookup_by_phandle Before returning, call of_node_put() for the device node returned by of_parse_phandle(). Fixes: ea9c260514c1 ("gpu: ipu-v3: add driver for Prefetch Resolve Gasket") Signed-off-by: Tobias Jordan Signed-off-by: Philipp Zabel --- drivers/gpu/ipu-v3/ipu-prg.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/ipu-v3/ipu-prg.c b/drivers/gpu/ipu-v3/ipu-prg.c index 067365c733c6..97b99500153d 100644 --- a/drivers/gpu/ipu-v3/ipu-prg.c +++ b/drivers/gpu/ipu-v3/ipu-prg.c @@ -102,11 +102,14 @@ ipu_prg_lookup_by_phandle(struct device *dev, const char *name, int ipu_id) mutex_unlock(&ipu_prg_list_mutex); device_link_add(dev, prg->dev, DL_FLAG_AUTOREMOVE); prg->id = ipu_id; + of_node_put(prg_node); return prg; } } mutex_unlock(&ipu_prg_list_mutex); + of_node_put(prg_node); + return NULL; } From 58a22fc44539ad7fd4c07c9fcc156cad1e3340ea Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 25 Jan 2018 10:37:52 +0100 Subject: [PATCH 12/25] gpu: ipu-cpmem: add 16-bit grayscale support to ipu_cpmem_set_image Add the missing offset calculation for 16-bit grayscale images. Since the IPU only supports capturing greyscale in raw passthrough mode, it is the same as 16-bit bayer formats. Signed-off-by: Philipp Zabel --- drivers/gpu/ipu-v3/ipu-cpmem.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/ipu-v3/ipu-cpmem.c b/drivers/gpu/ipu-v3/ipu-cpmem.c index ef32377b91c0..9f2d9ec42add 100644 --- a/drivers/gpu/ipu-v3/ipu-cpmem.c +++ b/drivers/gpu/ipu-v3/ipu-cpmem.c @@ -795,6 +795,7 @@ int ipu_cpmem_set_image(struct ipuv3_channel *ch, struct ipu_image *image) case V4L2_PIX_FMT_SGBRG16: case V4L2_PIX_FMT_SGRBG16: case V4L2_PIX_FMT_SRGGB16: + case V4L2_PIX_FMT_Y16: offset = image->rect.left * 2 + image->rect.top * pix->bytesperline; break; From 50b0f0aee839b5a9995fe7964a678634f75a0518 Mon Sep 17 00:00:00 2001 From: Jan Luebbe Date: Tue, 13 Feb 2018 18:35:36 +0100 Subject: [PATCH 13/25] gpu: ipu-csi: add 10/12-bit grayscale support to mbus_code_to_bus_cfg The 10/12-bit config used for bayer formats is used for grayscale as well. Signed-off-by: Jan Luebbe Signed-off-by: Philipp Zabel --- drivers/gpu/ipu-v3/ipu-csi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/ipu-v3/ipu-csi.c b/drivers/gpu/ipu-v3/ipu-csi.c index 24e12b87a0cb..caa05b0702e1 100644 --- a/drivers/gpu/ipu-v3/ipu-csi.c +++ b/drivers/gpu/ipu-v3/ipu-csi.c @@ -288,6 +288,7 @@ static int mbus_code_to_bus_cfg(struct ipu_csi_bus_config *cfg, u32 mbus_code) case MEDIA_BUS_FMT_SGBRG10_1X10: case MEDIA_BUS_FMT_SGRBG10_1X10: case MEDIA_BUS_FMT_SRGGB10_1X10: + case MEDIA_BUS_FMT_Y10_1X10: cfg->data_fmt = CSI_SENS_CONF_DATA_FMT_BAYER; cfg->mipi_dt = MIPI_DT_RAW10; cfg->data_width = IPU_CSI_DATA_WIDTH_10; @@ -296,6 +297,7 @@ static int mbus_code_to_bus_cfg(struct ipu_csi_bus_config *cfg, u32 mbus_code) case MEDIA_BUS_FMT_SGBRG12_1X12: case MEDIA_BUS_FMT_SGRBG12_1X12: case MEDIA_BUS_FMT_SRGGB12_1X12: + case MEDIA_BUS_FMT_Y12_1X12: cfg->data_fmt = CSI_SENS_CONF_DATA_FMT_BAYER; cfg->mipi_dt = MIPI_DT_RAW12; cfg->data_width = IPU_CSI_DATA_WIDTH_12; From 06998a756a3865817b87a129a7e5d5bb66dc1ec3 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Sun, 18 Feb 2018 16:53:59 +0800 Subject: [PATCH 14/25] drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA Similar to commit e10aec652f31 ("drm/edid: Add 6 bpc quirk for display AEO model 0."), the EDID reports "DFP 1.x compliant TMDS" but it support 6bpc instead of 8 bpc. Hence, use 6 bpc quirk for this panel. Fixes: 196f954e2509 ("drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown"") BugLink: https://bugs.launchpad.net/bugs/1749420 Signed-off-by: Kai-Heng Feng Reviewed-by: Mario Kleiner Cc: # v4.8+ Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20180218085359.7817-1-kai.heng.feng@canonical.com --- drivers/gpu/drm/drm_edid.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index cb487148359a..16fb76ba6509 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -113,6 +113,9 @@ static const struct edid_quirk { /* AEO model 0 reports 8 bpc, but is a 6 bpc panel */ { "AEO", 0, EDID_QUIRK_FORCE_6BPC }, + /* CPT panel of Asus UX303LA reports 8 bpc, but is a 6 bpc panel */ + { "CPT", 0x17df, EDID_QUIRK_FORCE_6BPC }, + /* Belinea 10 15 55 */ { "MAX", 1516, EDID_QUIRK_PREFER_LARGE_60 }, { "MAX", 0x77e, EDID_QUIRK_PREFER_LARGE_60 }, From a588a8bb7b25a3fb4f7fed00feb7aec541fc2632 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 17 Jan 2018 18:01:21 +0100 Subject: [PATCH 15/25] drm/exynos: g2d: use monotonic timestamps The exynos DRM driver uses real-time 'struct timeval' values for exporting its timestamps to user space. This has multiple problems: 1. signed seconds overflow in y2038 2. the 'struct timeval' definition is deprecated in the kernel 3. time may jump or go backwards after a 'settimeofday()' syscall 4. other DRM timestamps are in CLOCK_MONOTONIC domain, so they can't be compared 5. exporting microseconds requires a division by 1000, which may be slow on some architectures. The code existed in two places before, but the IPP portion was removed in 8ded59413ccc ("drm/exynos: ipp: Remove Exynos DRM IPP subsystem"), so we no longer need to worry about it. Ideally timestamps should just use 64-bit nanoseconds instead, but of course we can't change that now. Instead, this tries to address the first four points above by using monotonic 'timespec' values. According to Tobias Jakobi, user space doesn't care about the timestamp at the moment, so we can change the format. Even if there is something looking at them, it will work just fine with monotonic times as long as the application only looks at the relative values between two events. Link: https://patchwork.kernel.org/patch/10038593/ Cc: Tobias Jakobi Signed-off-by: Arnd Bergmann Reviewed-by: Tobias Jakobi Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_g2d.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index 2b8bf2dd6387..9effe40f5fa5 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -926,7 +926,7 @@ static void g2d_finish_event(struct g2d_data *g2d, u32 cmdlist_no) struct drm_device *drm_dev = g2d->subdrv.drm_dev; struct g2d_runqueue_node *runqueue_node = g2d->runqueue_node; struct drm_exynos_pending_g2d_event *e; - struct timeval now; + struct timespec64 now; if (list_empty(&runqueue_node->event_list)) return; @@ -934,9 +934,9 @@ static void g2d_finish_event(struct g2d_data *g2d, u32 cmdlist_no) e = list_first_entry(&runqueue_node->event_list, struct drm_exynos_pending_g2d_event, base.link); - do_gettimeofday(&now); + ktime_get_ts64(&now); e->event.tv_sec = now.tv_sec; - e->event.tv_usec = now.tv_usec; + e->event.tv_usec = now.tv_nsec / NSEC_PER_USEC; e->event.cmdlist_no = cmdlist_no; drm_send_event(drm_dev, &e->base); From 1293b6191010672c0c9dacae8f71c6f3e4d70cbe Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 5 Feb 2018 21:09:59 +0100 Subject: [PATCH 16/25] drm/exynos: fix comparison to bitshift when dealing with a mask Due to a typo, the mask was destroyed by a comparison instead of a bit shift. Signed-off-by: Wolfram Sang Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/regs-fimc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/regs-fimc.h b/drivers/gpu/drm/exynos/regs-fimc.h index 30496134a3d0..d7cbe53c4c01 100644 --- a/drivers/gpu/drm/exynos/regs-fimc.h +++ b/drivers/gpu/drm/exynos/regs-fimc.h @@ -569,7 +569,7 @@ #define EXYNOS_CIIMGEFF_FIN_EMBOSSING (4 << 26) #define EXYNOS_CIIMGEFF_FIN_SILHOUETTE (5 << 26) #define EXYNOS_CIIMGEFF_FIN_MASK (7 << 26) -#define EXYNOS_CIIMGEFF_PAT_CBCR_MASK ((0xff < 13) | (0xff < 0)) +#define EXYNOS_CIIMGEFF_PAT_CBCR_MASK ((0xff << 13) | (0xff << 0)) /* Real input DMA size register */ #define EXYNOS_CIREAL_ISIZE_AUTOLOAD_ENABLE (1 << 31) From 6f0a60298bbbea43ab5e3955913ab19c153076f3 Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Thu, 8 Feb 2018 18:42:51 +0100 Subject: [PATCH 17/25] drm/exynos: g2d: Delete an error message for a failed memory allocation in two functions Omit an extra message for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_g2d.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index 9effe40f5fa5..f68ef1b3a28c 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -286,7 +286,6 @@ static int g2d_init_cmdlist(struct g2d_data *g2d) node = kcalloc(G2D_CMDLIST_NUM, sizeof(*node), GFP_KERNEL); if (!node) { - dev_err(dev, "failed to allocate memory\n"); ret = -ENOMEM; goto err; } @@ -1358,10 +1357,9 @@ int exynos_g2d_exec_ioctl(struct drm_device *drm_dev, void *data, return -EFAULT; runqueue_node = kmem_cache_alloc(g2d->runqueue_slab, GFP_KERNEL); - if (!runqueue_node) { - dev_err(dev, "failed to allocate memory\n"); + if (!runqueue_node) return -ENOMEM; - } + run_cmdlist = &runqueue_node->run_cmdlist; event_list = &runqueue_node->event_list; INIT_LIST_HEAD(run_cmdlist); From b701a1436a5b177dc2240ba7e8f2ff7106bc8d84 Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Thu, 15 Feb 2018 08:23:15 +0000 Subject: [PATCH 18/25] drm/exynos: remove exynos_drm_rotator.h Since its inclusion in 2012 via commit bea8a429d91a ("drm/exynos: add rotator ipp driver") this header is not used by any source files and is empty. Lets just remove it. Signed-off-by: Corentin Labbe Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_rotator.h | 19 ------------------- 1 file changed, 19 deletions(-) delete mode 100644 drivers/gpu/drm/exynos/exynos_drm_rotator.h diff --git a/drivers/gpu/drm/exynos/exynos_drm_rotator.h b/drivers/gpu/drm/exynos/exynos_drm_rotator.h deleted file mode 100644 index 71a0b4c0c1e8..000000000000 --- a/drivers/gpu/drm/exynos/exynos_drm_rotator.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * - * Authors: - * YoungJun Cho - * Eunchul Kim - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef _EXYNOS_DRM_ROTATOR_H_ -#define _EXYNOS_DRM_ROTATOR_H_ - -/* TODO */ - -#endif From c84b66f8aa3f879dbf41353f677d87875f5fc6c9 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 14 Feb 2018 18:23:56 +0100 Subject: [PATCH 19/25] drm: exynos: Use proper macro definition for HDMI_I2S_PIN_SEL_1 Bit field [2:0] of HDMI_I2S_PIN_SEL_1 corresponds to SDATA_0, not SDATA_2. This patch removes redefinition of HDMI_I2S_SEL_DATA2 constant and adds missing HDMI_I2S_SEL_DATA0. The value of bit field selecting SDATA_1 (pin_sel_3) is also changed, so it is 3 as suggested in the Exynos TRMs. Signed-off-by: Sylwester Nawrocki Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_hdmi.c | 7 +++++-- drivers/gpu/drm/exynos/regs-hdmi.h | 2 +- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index a4b75a46f946..abd84cbcf1c2 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1068,10 +1068,13 @@ static void hdmi_audio_config(struct hdmi_context *hdata) /* Configuration I2S input ports. Configure I2S_PIN_SEL_0~4 */ hdmi_reg_writeb(hdata, HDMI_I2S_PIN_SEL_0, HDMI_I2S_SEL_SCLK(5) | HDMI_I2S_SEL_LRCK(6)); - hdmi_reg_writeb(hdata, HDMI_I2S_PIN_SEL_1, HDMI_I2S_SEL_SDATA1(1) - | HDMI_I2S_SEL_SDATA2(4)); + + hdmi_reg_writeb(hdata, HDMI_I2S_PIN_SEL_1, HDMI_I2S_SEL_SDATA1(3) + | HDMI_I2S_SEL_SDATA0(4)); + hdmi_reg_writeb(hdata, HDMI_I2S_PIN_SEL_2, HDMI_I2S_SEL_SDATA3(1) | HDMI_I2S_SEL_SDATA2(2)); + hdmi_reg_writeb(hdata, HDMI_I2S_PIN_SEL_3, HDMI_I2S_SEL_DSD(0)); /* I2S_CON_1 & 2 */ diff --git a/drivers/gpu/drm/exynos/regs-hdmi.h b/drivers/gpu/drm/exynos/regs-hdmi.h index 04be0f7e8193..4420c203ac85 100644 --- a/drivers/gpu/drm/exynos/regs-hdmi.h +++ b/drivers/gpu/drm/exynos/regs-hdmi.h @@ -464,7 +464,7 @@ /* I2S_PIN_SEL_1 */ #define HDMI_I2S_SEL_SDATA1(x) (((x) & 0x7) << 4) -#define HDMI_I2S_SEL_SDATA2(x) ((x) & 0x7) +#define HDMI_I2S_SEL_SDATA0(x) ((x) & 0x7) /* I2S_PIN_SEL_2 */ #define HDMI_I2S_SEL_SDATA3(x) (((x) & 0x7) << 4) From b8ff1802815913aad52695898cccbc9f77b7e726 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 19 Feb 2018 11:35:43 +0000 Subject: [PATCH 20/25] drm: Handle unexpected holes in color-eviction During eviction, the driver may free more than one hole in the drm_mm due to the side-effects in evicting the scanned nodes. However, drm_mm_scan_color_evict() expects that the scan result is the first available hole (in the mru freed hole_stack list): kernel BUG at drivers/gpu/drm/drm_mm.c:844! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: i915 snd_hda_codec_analog snd_hda_codec_generic coretemp snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core lpc_ich snd_pcm e1000e mei_me prime_numbers mei CPU: 1 PID: 1490 Comm: gem_userptr_bli Tainted: G U 4.16.0-rc1-g740f57c54ecf-kasan_6+ #1 Hardware name: Dell Inc. OptiPlex 755 /0PU052, BIOS A08 02/19/2008 RIP: 0010:drm_mm_scan_color_evict+0x2b8/0x3d0 RSP: 0018:ffff880057a573f8 EFLAGS: 00010287 RAX: ffff8800611f5980 RBX: ffff880057a575d0 RCX: dffffc0000000000 RDX: 00000000029d5000 RSI: 1ffff1000af4aec1 RDI: ffff8800611f5a10 RBP: ffff88005ab884d0 R08: ffff880057a57600 R09: 000000000afff000 R10: 1ffff1000b5710b5 R11: 0000000000001000 R12: 1ffff1000af4ae82 R13: ffff8800611f59b0 R14: ffff8800611f5980 R15: ffff880057a57608 FS: 00007f2de0c2e8c0(0000) GS:ffff88006ac40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2ddde1e000 CR3: 00000000609b2000 CR4: 00000000000006e0 Call Trace: ? drm_mm_scan_remove_block+0x330/0x330 ? drm_mm_scan_remove_block+0x151/0x330 i915_gem_evict_something+0x711/0xbd0 [i915] ? igt_evict_contexts+0x50/0x50 [i915] ? nop_clear_range+0x10/0x10 [i915] ? igt_evict_something+0x90/0x90 [i915] ? i915_gem_gtt_reserve+0x1a1/0x320 [i915] i915_gem_gtt_insert+0x237/0x400 [i915] __i915_vma_do_pin+0xc25/0x1a20 [i915] eb_lookup_vmas+0x1c63/0x3790 [i915] ? i915_gem_check_execbuffer+0x250/0x250 [i915] ? trace_hardirqs_on_caller+0x33f/0x590 ? _raw_spin_unlock_irqrestore+0x39/0x60 ? __pm_runtime_resume+0x7d/0xf0 i915_gem_do_execbuffer+0x86a/0x2ff0 [i915] ? __kmalloc+0x132/0x340 ? i915_gem_execbuffer2_ioctl+0x10f/0x760 [i915] ? drm_ioctl_kernel+0x12e/0x1c0 ? drm_ioctl+0x662/0x980 ? eb_relocate_slow+0xa90/0xa90 [i915] ? i915_gem_execbuffer2_ioctl+0x10f/0x760 [i915] ? __might_fault+0xea/0x1a0 i915_gem_execbuffer2_ioctl+0x3cc/0x760 [i915] ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] ? lock_acquire+0x3c0/0x3c0 ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] drm_ioctl_kernel+0x12e/0x1c0 drm_ioctl+0x662/0x980 ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] ? drm_getstats+0x20/0x20 ? debug_check_no_obj_freed+0x2a6/0x8c0 do_vfs_ioctl+0x170/0xe70 ? ioctl_preallocate+0x170/0x170 ? task_work_run+0xbe/0x160 ? lock_acquire+0x3c0/0x3c0 ? trace_hardirqs_on_caller+0x33f/0x590 ? _raw_spin_unlock_irq+0x2f/0x50 SyS_ioctl+0x36/0x70 ? do_vfs_ioctl+0xe70/0xe70 do_syscall_64+0x18c/0x5d0 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x7f2ddf13b587 RSP: 002b:00007fff15c4f9d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f2ddf13b587 RDX: 00007fff15c4fa20 RSI: 0000000040406469 RDI: 0000000000000003 RBP: 00007fff15c4fa20 R08: 0000000000000000 R09: 00007f2ddf3fe120 R10: 0000000000000073 R11: 0000000000000246 R12: 0000000040406469 R13: 0000000000000003 R14: 00007fff15c4fa20 R15: 00000000000000c7 Code: 00 00 00 4a c7 44 22 08 00 00 00 00 42 c7 44 22 10 00 00 00 00 48 81 c4 b8 00 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 0f 0b 0f 0b <0f> 0b 31 c0 eb c0 4c 89 ef e8 9a 09 41 ff e9 1e fe ff ff 4c 89 RIP: drm_mm_scan_color_evict+0x2b8/0x3d0 RSP: ffff880057a573f8 We can trivially relax this assumption by searching the hole_stack for the scan result and warn instead if the driver called us without any result. Fixes: 3fa489dabea9 ("drm: Apply tight eviction scanning to color_adjust") Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: # v4.11+ Reviewed-by: Joonas Lahtinen Reviewed-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20180219113543.8010-1-chris@chris-wilson.co.uk --- drivers/gpu/drm/drm_mm.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c index c3c79ee6119e..edab571dbc90 100644 --- a/drivers/gpu/drm/drm_mm.c +++ b/drivers/gpu/drm/drm_mm.c @@ -836,9 +836,24 @@ struct drm_mm_node *drm_mm_scan_color_evict(struct drm_mm_scan *scan) if (!mm->color_adjust) return NULL; - hole = list_first_entry(&mm->hole_stack, typeof(*hole), hole_stack); - hole_start = __drm_mm_hole_node_start(hole); - hole_end = hole_start + hole->hole_size; + /* + * The hole found during scanning should ideally be the first element + * in the hole_stack list, but due to side-effects in the driver it + * may not be. + */ + list_for_each_entry(hole, &mm->hole_stack, hole_stack) { + hole_start = __drm_mm_hole_node_start(hole); + hole_end = hole_start + hole->hole_size; + + if (hole_start <= scan->hit_start && + hole_end >= scan->hit_end) + break; + } + + /* We should only be called after we found the hole previously */ + DRM_MM_BUG_ON(&hole->hole_stack == &mm->hole_stack); + if (unlikely(&hole->hole_stack == &mm->hole_stack)) + return NULL; DRM_MM_BUG_ON(hole_start > scan->hit_start); DRM_MM_BUG_ON(hole_end < scan->hit_end); From e88230a3744a71a0b5ecfb45e08ddfe1c884e50d Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Thu, 15 Feb 2018 11:19:36 +0100 Subject: [PATCH 21/25] drm/meson: fix vsync buffer update The plane buffer address/stride/height was incorrectly updated in the plane_atomic_update operation instead of the vsync irq. This patch delays this operation in the vsync irq along with the other plane delayed setup. This issue was masked using legacy framebuffer and X11 modesetting, but is clearly visible using gbm rendering when buffer is submitted late after vblank, like using software decoding and OpenGL rendering in Kodi. With this patch, tearing and other artifacts disappears completely. Cc: Michal Lazo Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Signed-off-by: Neil Armstrong Acked-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/1518689976-23292-1-git-send-email-narmstrong@baylibre.com --- drivers/gpu/drm/meson/meson_crtc.c | 6 ++++++ drivers/gpu/drm/meson/meson_drv.h | 3 +++ drivers/gpu/drm/meson/meson_plane.c | 7 +++---- 3 files changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/meson/meson_crtc.c b/drivers/gpu/drm/meson/meson_crtc.c index 5155f0179b61..05520202c967 100644 --- a/drivers/gpu/drm/meson/meson_crtc.c +++ b/drivers/gpu/drm/meson/meson_crtc.c @@ -36,6 +36,7 @@ #include "meson_venc.h" #include "meson_vpp.h" #include "meson_viu.h" +#include "meson_canvas.h" #include "meson_registers.h" /* CRTC definition */ @@ -192,6 +193,11 @@ void meson_crtc_irq(struct meson_drm *priv) } else meson_vpp_disable_interlace_vscaler_osd1(priv); + meson_canvas_setup(priv, MESON_CANVAS_ID_OSD1, + priv->viu.osd1_addr, priv->viu.osd1_stride, + priv->viu.osd1_height, MESON_CANVAS_WRAP_NONE, + MESON_CANVAS_BLKMODE_LINEAR); + /* Enable OSD1 */ writel_bits_relaxed(VPP_OSD1_POSTBLEND, VPP_OSD1_POSTBLEND, priv->io_base + _REG(VPP_MISC)); diff --git a/drivers/gpu/drm/meson/meson_drv.h b/drivers/gpu/drm/meson/meson_drv.h index 5e8b392b9d1f..8450d6ac8c9b 100644 --- a/drivers/gpu/drm/meson/meson_drv.h +++ b/drivers/gpu/drm/meson/meson_drv.h @@ -43,6 +43,9 @@ struct meson_drm { bool osd1_commit; uint32_t osd1_ctrl_stat; uint32_t osd1_blk0_cfg[5]; + uint32_t osd1_addr; + uint32_t osd1_stride; + uint32_t osd1_height; } viu; struct { diff --git a/drivers/gpu/drm/meson/meson_plane.c b/drivers/gpu/drm/meson/meson_plane.c index 17e96fa47868..0b6011b8d632 100644 --- a/drivers/gpu/drm/meson/meson_plane.c +++ b/drivers/gpu/drm/meson/meson_plane.c @@ -164,10 +164,9 @@ static void meson_plane_atomic_update(struct drm_plane *plane, /* Update Canvas with buffer address */ gem = drm_fb_cma_get_gem_obj(fb, 0); - meson_canvas_setup(priv, MESON_CANVAS_ID_OSD1, - gem->paddr, fb->pitches[0], - fb->height, MESON_CANVAS_WRAP_NONE, - MESON_CANVAS_BLKMODE_LINEAR); + priv->viu.osd1_addr = gem->paddr; + priv->viu.osd1_stride = fb->pitches[0]; + priv->viu.osd1_height = fb->height; spin_unlock_irqrestore(&priv->drm->event_lock, flags); } From b3b12ea3661958bc093e258b7c0dd0a13bdcc719 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 19 Feb 2018 18:59:36 +0100 Subject: [PATCH 22/25] drm/edid: quirk Oculus Rift headsets as non-desktop This uses the EDID info from Oculus Rift DK1 (OVR-0001), DK2 (OVR-0003), and CV1 (OVR-0004) to mark them as non-desktop. Signed-off-by: Philipp Zabel Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index ddd537914575..d6fa56bb6906 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -162,6 +162,11 @@ static const struct edid_quirk { /* HTC Vive VR Headset */ { "HVR", 0xaa01, EDID_QUIRK_NON_DESKTOP }, + + /* Oculus Rift DK1, DK2, and CV1 VR Headsets */ + { "OVR", 0x0001, EDID_QUIRK_NON_DESKTOP }, + { "OVR", 0x0003, EDID_QUIRK_NON_DESKTOP }, + { "OVR", 0x0004, EDID_QUIRK_NON_DESKTOP }, }; /* From 90eda8fc8016cfe39e2c73222e14665f0e5dabb1 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 19 Feb 2018 18:59:37 +0100 Subject: [PATCH 23/25] drm/edid: quirk Windows Mixed Reality headsets as non-desktop This uses the EDID info from Lenovo Explorer (LEN-b800), Acer AH100 (ACR-7fce), and Samsung Odyssey (SEC-144a) to mark them as non-desktop. The other entries are for the HP Windows Mixed Reality Headset (HPN-3515), the Fujitsu Windows Mixed Reality headset (FUJ-1970), the Dell Visor (DEL-7fce), and the ASUS HC102 (AUS-c102). They are not tested with real hardware, but listed as HMD monitors alongside the tested headsets in the Microsoft HololensSensors driver package. Signed-off-by: Philipp Zabel Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index d6fa56bb6906..bfd89b47b162 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -167,6 +167,16 @@ static const struct edid_quirk { { "OVR", 0x0001, EDID_QUIRK_NON_DESKTOP }, { "OVR", 0x0003, EDID_QUIRK_NON_DESKTOP }, { "OVR", 0x0004, EDID_QUIRK_NON_DESKTOP }, + + /* Windows Mixed Reality Headsets */ + { "ACR", 0x7fce, EDID_QUIRK_NON_DESKTOP }, + { "HPN", 0x3515, EDID_QUIRK_NON_DESKTOP }, + { "LEN", 0x0408, EDID_QUIRK_NON_DESKTOP }, + { "LEN", 0xb800, EDID_QUIRK_NON_DESKTOP }, + { "FUJ", 0x1970, EDID_QUIRK_NON_DESKTOP }, + { "DEL", 0x7fce, EDID_QUIRK_NON_DESKTOP }, + { "SEC", 0x144a, EDID_QUIRK_NON_DESKTOP }, + { "AUS", 0xc102, EDID_QUIRK_NON_DESKTOP }, }; /* From ccffc9ebfa66e3f2cc5e17b2579202786050b32e Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 19 Feb 2018 18:59:38 +0100 Subject: [PATCH 24/25] drm/edid: quirk Sony PlayStation VR headset as non-desktop This uses the EDID info from the Sony PlayStation VR headset, when connected directly, to mark it as non-desktop. Since the connection box (product id b403) defaults to HDMI pass-through to the TV, it is not marked as non-desktop. Signed-off-by: Philipp Zabel Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index bfd89b47b162..9796c29dc004 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -177,6 +177,9 @@ static const struct edid_quirk { { "DEL", 0x7fce, EDID_QUIRK_NON_DESKTOP }, { "SEC", 0x144a, EDID_QUIRK_NON_DESKTOP }, { "AUS", 0xc102, EDID_QUIRK_NON_DESKTOP }, + + /* Sony PlayStation VR Headset */ + { "SNY", 0x0704, EDID_QUIRK_NON_DESKTOP }, }; /* From 30a3317ddc2427d173d8bcffaa3f41a61eb66560 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Tue, 20 Feb 2018 16:20:08 +0200 Subject: [PATCH 25/25] drm/tve200: fix kernel-doc documentation comment include The DOC: line acts as an identifier for the :doc: include. Fixes: ./drivers/gpu/drm/tve200/tve200_drv.c:1: warning: no structured comments found Cc: Linus Walleij Reviewed-by: Daniel Vetter Reviewed-by: Linus Walleij Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20180220142008.9330-1-jani.nikula@intel.com --- Documentation/gpu/tve200.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/gpu/tve200.rst b/Documentation/gpu/tve200.rst index 69b17b324e12..152ea9398f7e 100644 --- a/Documentation/gpu/tve200.rst +++ b/Documentation/gpu/tve200.rst @@ -3,4 +3,4 @@ ================================== .. kernel-doc:: drivers/gpu/drm/tve200/tve200_drv.c - :doc: Faraday TV Encoder 200 + :doc: Faraday TV Encoder TVE200 DRM Driver