dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants

Update the pca954x bindings to add support for the Maxim MAX735x/MAX736x
chips. The functionality will be provided by the existing pca954x driver.

For chips that are powered off by default add a regulator called vdd-supply.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This commit is contained in:
Patrick Rudolph 2023-08-21 08:20:22 +02:00 committed by Wolfram Sang
parent f0382e3a5c
commit dde2c69042
1 changed files with 21 additions and 2 deletions

View File

@ -4,18 +4,29 @@
$id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NXP PCA954x I2C bus switch
title: NXP PCA954x I2C and compatible bus switches
maintainers:
- Laurent Pinchart <laurent.pinchart@ideasonboard.com>
description:
The binding supports NXP PCA954x and PCA984x I2C mux/switch devices.
The NXP PCA954x and compatible devices are I2C bus
multiplexer/switches that share the same functionality
and register layout.
The devices usually have 4 or 8 child buses, which are
attached to the parent bus by using the SMBus "Send Byte"
command.
properties:
compatible:
oneOf:
- enum:
- maxim,max7356
- maxim,max7357
- maxim,max7358
- maxim,max7367
- maxim,max7368
- maxim,max7369
- nxp,pca9540
- nxp,pca9542
- nxp,pca9543
@ -56,6 +67,10 @@ properties:
description: if present, overrides i2c-mux-idle-disconnect
$ref: /schemas/mux/mux-controller.yaml#/properties/idle-state
vdd-supply:
description: A voltage regulator supplying power to the chip. On PCA9846
the regulator supplies power to VDD2 (core logic) and optionally to VDD1.
required:
- compatible
- reg
@ -68,6 +83,8 @@ allOf:
compatible:
contains:
enum:
- maxim,max7367
- maxim,max7369
- nxp,pca9542
- nxp,pca9543
- nxp,pca9544
@ -94,6 +111,8 @@ examples:
#size-cells = <0>;
reg = <0x74>;
vdd-supply = <&p3v3>;
interrupt-parent = <&ipic>;
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;