lrbp->compl_time_stamp_local_clock is set to zero after sending a sqe
but it is not updated after completing a cqe. Thus the printed
information in ufshcd_print_tr() will always be zero.
Update lrbp->cmpl_time_stamp_local_clock after completing a cqe.
Log sample:
ufshcd-qcom 1d84000.ufshc: UPIU[8] - issue time 8750227249 us
ufshcd-qcom 1d84000.ufshc: UPIU[8] - complete time 0 us
Fixes: c30d8d010b ("scsi: ufs: core: Prepare for completion in MCQ")
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: liuderong <liuderong@oppo.com>
Link: https://lore.kernel.org/r/1733470182-220841-1-git-send-email-liuderong@oppo.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When the power mode change is successful but the power mode hasn't
actually changed, the post notification was missed. Similar to the
approach with hibernate/clock scale/hce enable, having pre/post
notifications in the same function will make it easier to maintain.
Additionally, supplement the description of power parameters for the
pwr_change_notify callback.
Fixes: 7eb584db73 ("ufs: refactor configuring power mode")
Cc: stable@vger.kernel.org #6.11.x
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20241122024943.30589-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, hisi_sas, st).
Amazingly enough, no core changes with the biggest set of driver
changes being ufs (which conflicted with it's own fixes a bit, hence
the merges) and the rest being minor fixes and updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (97 commits)
scsi: st: New session only when Unit Attention for new tape
scsi: st: Add MTIOCGET and MTLOAD to ioctls allowed after device reset
scsi: st: Don't modify unknown block number in MTIOCGET
scsi: ufs: core: Restore SM8650 support
scsi: sun3: Mark driver struct with __refdata to prevent section mismatch
scsi: sg: Enable runtime power management
scsi: qedi: Fix a possible memory leak in qedi_alloc_and_init_sb()
scsi: qedf: Fix a possible memory leak in qedf_alloc_and_init_sb()
scsi: fusion: Remove unused variable 'rc'
scsi: bfa: Fix use-after-free in bfad_im_module_exit()
scsi: esas2r: Remove unused esas2r_build_cli_req()
scsi: target: Fix incorrect function name in pscsi_create_type_disk()
scsi: ufs: Replace deprecated PCI functions
scsi: Switch back to struct platform_driver::remove()
scsi: pm8001: Increase request sg length to support 4MiB requests
scsi: pm8001: Initialize devices in pm8001_alloc_dev()
scsi: pm8001: Use module param to set pcs event log severity
scsi: ufs: ufs-mediatek: Configure individual LU queue flags
scsi: MAINTAINERS: Update UFS Exynos entry
scsi: lpfc: Copyright updates for 14.4.0.6 patches
...
Currently, RTC work is only cancelled during __ufshcd_wl_suspend(). When
ufshcd is removed in ufshcd_remove(), RTC work is not cancelled. Due to
this, any further trigger of the RTC work after ufshcd_remove() would
result in a NULL pointer dereference as below:
Unable to handle kernel NULL pointer dereference at virtual address 00000000000002a4
Workqueue: events ufshcd_rtc_work
Call trace:
_raw_spin_lock_irqsave+0x34/0x8c
pm_runtime_get_if_active+0x24/0xb4
ufshcd_rtc_work+0x124/0x19c
process_scheduled_works+0x18c/0x2d8
worker_thread+0x144/0x280
kthread+0x11c/0x128
ret_from_fork+0x10/0x20
Since RTC work accesses the ufshcd internal structures, it should be cancelled
when ufshcd is removed. So do that in ufshcd_remove(), as per the order in
ufshcd_init().
Cc: stable@vger.kernel.org # 6.8
Fixes: 6bf999e0eb ("scsi: ufs: core: Add UFS RTC support")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20241111-ufs_bug_fix-v1-1-45ad8b62f02e@linaro.org
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
User layer applications can send UIC GET/SET commands via the BSG
framework, and if the user layer application sends a UIC SET command to the
PA_PWRMODE attribute, a power mode change shall be initiated in UniPro and
two interrupts shall be triggered if the power mode is successfully
changed, i.e., UIC Command Completion interrupt and UIC Power Mode
interrupt.
The current UFS BSG code calls ufshcd_send_uic_cmd() directly, with which
the second interrupt, i.e., UIC Power Mode interrupt, shall be treated as
unhandled interrupt. In addition, after the UIC command is completed, user
layer application has to poll UniPro and/or M-PHY state machine to confirm
the power mode change is finished.
Add a new wrapper function ufshcd_send_bsg_uic_cmd() and call it from
ufs_bsg_request() so that if a UIC SET command is targeting the PA_PWRMODE
attribute it can be redirected to ufshcd_uic_pwr_ctrl().
Fixes: e77044c5a8 ("scsi: ufs-bsg: Add support for uic commands in ufs_bsg_request()")
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/20241119095613.121385-1-quic_ziqichen@quicinc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull SCSI fixes from James Bottomley:
"Two small fixes, the drivers one in ufs simply delays running a work
queue and the generic one in zoned storage switches to a more correct
API that tries the standard buddy allocator first (for small
allocations); this fixes an allocation problem with small allocations
seen under memory pressure"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Start the RTC update work later
scsi: sd_zbc: Use kvzalloc() to allocate REPORT ZONES buffer
Pull SCSI fixes from James Bottomley:
"Two small fixes, both in drivers (ufs and scsi_debug)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix another deadlock during RTC update
scsi: scsi_debug: Fix do_device_access() handling of unexpected SG copy length
ufshcd_async_scan() is called (asynchronously) only by ufshcd_init().
Move the ufshcd_device_init(hba, true) call from ufshcd_async_scan()
into ufshcd_init(). This patch prepares for moving both scsi_add_host()
calls into ufshcd_add_scsi_host(). Calling ufshcd_device_init() from
ufshcd_init() without holding hba->host_sem is safe. This is safe
because hba->host_sem serializes core code and sysfs callbacks. The
ufshcd_device_init() call is moved before the scsi_add_host() call and
hence happens before any SCSI sysfs attributes are created.
Since ufshcd_device_init() may call scsi_add_host(), only call
scsi_add_host() from ufshcd_add_scsi_host() if the SCSI host has not yet
been added by ufshcd_device_init().
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-8-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move the ufshcd_device_init() and ufshcd_process_hba_result() calls to
the ufshcd_probe_hba() callers. This change refactors the code without
modifying the behavior of the UFSHCI driver. This change prepares for
moving one ufshcd_device_init() call into ufshcd_init().
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241016201249.2256266-7-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The ufshcd_scsi_block_requests() and ufshcd_scsi_unblock_requests()
calls were introduced in ufshcd_exception_event_handler() to prevent
that querying the exception event information would time out. Commit
10fe5888a4 ("scsi: ufs: increase the scsi query response timeout")
increased the timeout for querying exception information from 30 ms to
1.5 s and thereby eliminated the risk that a timeout would happen.
Hence, the calls to block and unblock SCSI requests are superfluous.
Remove these calls.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Tested-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022193130.2733293-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull SCSI fixes from James Bottomley:
"Fixes all in drivers. The largest is the mpi3mr which corrects a phy
count limit that should only apply to the controller but was being
incorrectly applied to expander phys"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: core: Fix null-ptr-deref in target_alloc_device()
scsi: mpi3mr: Validate SAS port assignments
scsi: ufs: core: Set SDEV_OFFLINE when UFS is shut down
scsi: ufs: core: Requeue aborted request
scsi: ufs: core: Fix the issue of ICU failure
After the SQ cleanup fix, the CQ will receive a response with the
corresponding tag marked as OCS: ABORTED. To align with the behavior of
Legacy SDB mode, the handling of OCS: ABORTED has been changed to match
that of OCS_INVALID_COMMAND_STATUS (SDB), with both returning a SCSI
result of DID_REQUEUE.
Furthermore, the workaround implemented before the SQ cleanup fix can be
removed.
Fixes: ab248643d3 ("scsi: ufs: core: Add error handling for MCQ mode")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20241001091917.6917-3-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull SCSI fixes from James Bottomley:
"Four small fixes, three in drivers and one in the FC transport class
to add idempotence to state setting"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_transport_fc: Allow setting rport state to current state
scsi: wd33c93: Don't use stale scsi_pointer value
scsi: fnic: Move flush_work initialization out of if block
scsi: ufs: Use pre-calculated offsets in ufshcd_init_lrb()
This patch introduces a previously missing step: zeroing the 'utp_upiu_req'
structure at the beginning of each upiu transaction. This ensures that the
upiu request fields are properly initialized, preventing potential issues
caused by residual data from previous commands.
While at it, re-use some of the common initializations for query and
command upiu.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240921062306.56019-1-avri.altman@wdc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replace manual offset calculations for response_upiu and prd_table in
ufshcd_init_lrb() with pre-calculated offsets already stored in the
utp_transfer_req_desc structure. The pre-calculated offsets are set
differently in ufshcd_host_memory_configure() based on the
UFSHCD_QUIRK_PRDT_BYTE_GRAN quirk, ensuring correct alignment and
access.
Fixes: 26f968d7de ("scsi: ufs: Introduce UFSHCD_QUIRK_PRDT_BYTE_GRAN quirk")
Cc: stable@vger.kernel.org
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240910044543.3812642-1-avri.altman@wdc.com
Acked-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
