Pull ext4 fix from Ted Ts'o:
"Fix an ext4 regression which landed during the 6.4 merge window"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
Revert "ext4: remove ac->ac_found > sbi->s_mb_min_to_scan dead check in ext4_mb_check_limits"
Pull btrfs fix from David Sterba:
"One regression fix.
The rewrite of scrub code in 6.4 broke device replace in zoned mode,
some of the writes could happen out of order so this had to be
adjusted for all cases"
* tag 'for-6.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: fix dev-replace after the scrub rework
This reverts commit 32c0869370.
The reverted commit was intended to remove a dead check however it was observed
that this check was actually being used to exit early instead of looping
sbi->s_mb_max_to_scan times when we are able to find a free extent bigger than
the goal extent. Due to this, a my performance tests (fsmark, parallel file
writes in a highly fragmented FS) were seeing a 2x-3x regression.
Example, the default value of the following variables is:
sbi->s_mb_max_to_scan = 200
sbi->s_mb_min_to_scan = 10
In ext4_mb_check_limits() if we find an extent smaller than goal, then we return
early and try again. This loop will go on until we have processed
sbi->s_mb_max_to_scan(=200) number of free extents at which point we exit and
just use whatever we have even if it is smaller than goal extent.
Now, the regression comes when we find an extent bigger than goal. Earlier, in
this case we would loop only sbi->s_mb_min_to_scan(=10) times and then just use
the bigger extent. However with commit 32c08693 that check was removed and hence
we would loop sbi->s_mb_max_to_scan(=200) times even though we have a big enough
free extent to satisfy the request. The only time we would exit early would be
when the free extent is *exactly* the size of our goal, which is pretty uncommon
occurrence and so we would almost always end up looping 200 times.
Hence, revert the commit by adding the check back to fix the regression. Also
add a comment to outline this policy.
Fixes: 32c0869370 ("ext4: remove ac->ac_found > sbi->s_mb_min_to_scan dead check in ext4_mb_check_limits")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/ddcae9658e46880dfec2fb0aa61d01fb3353d202.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull nfsd fixes from Chuck Lever:
- Two minor bug fixes
* tag 'nfsd-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: fix double fget() bug in __write_ports_addfd()
nfsd: make a copy of struct iattr before calling notify_change
When switching from kthreads to vhost_tasks two bugs were added:
1. The vhost worker tasks's now show up as processes so scripts doing
ps or ps a would not incorrectly detect the vhost task as another
process. 2. kthreads disabled freeze by setting PF_NOFREEZE, but
vhost tasks's didn't disable or add support for them.
To fix both bugs, this switches the vhost task to be thread in the
process that does the VHOST_SET_OWNER ioctl, and has vhost_worker call
get_signal to support SIGKILL/SIGSTOP and freeze signals. Note that
SIGKILL/STOP support is required because CLONE_THREAD requires
CLONE_SIGHAND which requires those 2 signals to be supported.
This is a modified version of the patch written by Mike Christie
<michael.christie@oracle.com> which was a modified version of patch
originally written by Linus.
Much of what depended upon PF_IO_WORKER now depends on PF_USER_WORKER.
Including ignoring signals, setting up the register state, and having
get_signal return instead of calling do_group_exit.
Tidied up the vhost_task abstraction so that the definition of
vhost_task only needs to be visible inside of vhost_task.c. Making
it easier to review the code and tell what needs to be done where.
As part of this the main loop has been moved from vhost_worker into
vhost_task_fn. vhost_worker now returns true if work was done.
The main loop has been updated to call get_signal which handles
SIGSTOP, freezing, and collects the message that tells the thread to
exit as part of process exit. This collection clears
__fatal_signal_pending. This collection is not guaranteed to
clear signal_pending() so clear that explicitly so the schedule()
sleeps.
For now the vhost thread continues to exist and run work until the
last file descriptor is closed and the release function is called as
part of freeing struct file. To avoid hangs in the coredump
rendezvous and when killing threads in a multi-threaded exec. The
coredump code and de_thread have been modified to ignore vhost threads.
Remvoing the special case for exec appears to require teaching
vhost_dev_flush how to directly complete transactions in case
the vhost thread is no longer running.
Removing the special case for coredump rendezvous requires either the
above fix needed for exec or moving the coredump rendezvous into
get_signal.
Fixes: 6e890c5d50 ("vhost: use vhost_tasks for worker threads")
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Co-developed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[BUG]
After commit e02ee89baa ("btrfs: scrub: switch scrub_simple_mirror()
to scrub_stripe infrastructure"), scrub no longer works for zoned device
at all.
Even an empty zoned btrfs cannot be replaced:
# mkfs.btrfs -f /dev/nvme0n1
# mount /dev/nvme0n1 /mnt/btrfs
# btrfs replace start -Bf 1 /dev/nvme0n2 /mnt/btrfs
Resetting device zones /dev/nvme1n1 (160 zones) ...
ERROR: ioctl(DEV_REPLACE_START) failed on "/mnt/btrfs/": Input/output error
And we can hit kernel crash related to that:
BTRFS info (device nvme1n1): host-managed zoned block device /dev/nvme3n1, 160 zones of 134217728 bytes
BTRFS info (device nvme1n1): dev_replace from /dev/nvme2n1 (devid 2) to /dev/nvme3n1 started
nvme3n1: Zone Management Append(0x7d) @ LBA 65536, 4 blocks, Zone Is Full (sct 0x1 / sc 0xb9) DNR
I/O error, dev nvme3n1, sector 786432 op 0xd:(ZONE_APPEND) flags 0x4000 phys_seg 3 prio class 2
BTRFS error (device nvme1n1): bdev /dev/nvme3n1 errs: wr 1, rd 0, flush 0, corrupt 0, gen 0
BUG: kernel NULL pointer dereference, address: 00000000000000a8
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:_raw_spin_lock_irqsave+0x1e/0x40
Call Trace:
<IRQ>
btrfs_lookup_ordered_extent+0x31/0x190
btrfs_record_physical_zoned+0x18/0x40
btrfs_simple_end_io+0xaf/0xc0
blk_update_request+0x153/0x4c0
blk_mq_end_request+0x15/0xd0
nvme_poll_cq+0x1d3/0x360
nvme_irq+0x39/0x80
__handle_irq_event_percpu+0x3b/0x190
handle_irq_event+0x2f/0x70
handle_edge_irq+0x7c/0x210
__common_interrupt+0x34/0xa0
common_interrupt+0x7d/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
[CAUSE]
Dev-replace reuses scrub code to iterate all extents and write the
existing content back to the new device.
And for zoned devices, we call fill_writer_pointer_gap() to make sure
all the writes into the zoned device is sequential, even if there may be
some gaps between the writes.
However we have several different bugs all related to zoned dev-replace:
- We are using ZONE_APPEND operation for metadata style write back
For zoned devices, btrfs has two ways to write data:
* ZONE_APPEND for data
This allows higher queue depth, but will not be able to know where
the write would land.
Thus needs to grab the real on-disk physical location in it's endio.
* WRITE for metadata
This requires single queue depth (new writes can only be submitted
after previous one finished), and all writes must be sequential.
For scrub, we go single queue depth, but still goes with ZONE_APPEND,
which requires btrfs_bio::inode being populated.
This is the cause of that crash.
- No correct tracing of write_pointer
After a write finished, we should forward sctx->write_pointer, or
fill_writer_pointer_gap() would not work properly and cause more
than necessary zero out, and fill the whole zone prematurely.
- Incorrect physical bytenr passed to fill_writer_pointer_gap()
In scrub_write_sectors(), one call site passes logical address, which
is completely wrong.
The other call site passes physical address of current sector, but
we should pass the physical address of the btrfs_bio we're submitting.
This is the cause of the -EIO errors.
[FIX]
- Do not use ZONE_APPEND for btrfs_submit_repair_write().
- Manually forward sctx->write_pointer after successful writeback
- Use the physical address of the to-be-submitted btrfs_bio for
fill_writer_pointer_gap()
Now zoned device replace would work as expected.
Reported-by: Christoph Hellwig <hch@lst.de>
Fixes: e02ee89baa ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull smb server fixes from Steve French:
"Eight server fixes (most also for stable):
- Two fixes for uninitialized pointer reads (rename and link)
- Fix potential UAF in oplock break
- Two fixes for potential out of bound reads in negotiate
- Fix crediting bug
- Two fixes for xfstests (allocation size fix for test 694 and lookup
issue shown by test 464)"
* tag '6.4-rc4-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: call putname after using the last component
ksmbd: fix incorrect AllocationSize set in smb2_get_info
ksmbd: fix UAF issue from opinfo->conn
ksmbd: fix multiple out-of-bounds read during context decoding
ksmbd: fix slab-out-of-bounds read in smb2_handle_negotiate
ksmbd: fix credit count leakage
ksmbd: fix uninitialized pointer read in smb2_create_link()
ksmbd: fix uninitialized pointer read in ksmbd_vfs_rename()
Pull smb client fixes from Steve French:
"Four small smb3 client fixes:
- two small fixes suggested by kernel test robot
- small cleanup fix
- update Paulo's email address in the maintainer file"
* tag '6.4-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: address unused variable warning
smb: delete an unnecessary statement
smb3: missing null check in SMB2_change_notify
smb3: update a reviewer email in MAINTAINERS file
Pull ext4 fixes from Ted Ts'o:
"Fix two regressions in ext4 and a number of issues reported by syzbot"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: enable the lazy init thread when remounting read/write
ext4: fix fsync for non-directories
ext4: add lockdep annotations for i_data_sem for ea_inode's
ext4: disallow ea_inodes with extended attributes
ext4: set lockdep subclass for the ea_inode in ext4_xattr_inode_cache_find()
ext4: add EA_INODE checking to ext4_iget()
The bug here is that you cannot rely on getting the same socket
from multiple calls to fget() because userspace can influence
that. This is a kind of double fetch bug.
The fix is to delete the svc_alien_sock() function and instead do
the checking inside the svc_addsock() function.
Fixes: 3064639423 ("nfsd: check passed socket's net matches NFSd superblock's one")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Pull btrfs fixes from David Sterba:
"One bug fix and two build warning fixes:
- call proper end bio callback for metadata RAID0 in a rare case of
an unaligned block
- fix uninitialized variable (reported by gcc 10.2)
- fix warning about potential access beyond array bounds on mips64
with 64k pages (runtime check would not allow that)"
* tag 'for-6.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix csum_tree_block page iteration to avoid tripping on -Werror=array-bounds
btrfs: fix an uninitialized variable warning in btrfs_log_inode
btrfs: call btrfs_orig_bbio_end_io in btrfs_end_bio_work
In commit a44be64bbe ("ext4: don't clear SB_RDONLY when remounting
r/w until quota is re-enabled") we defer clearing tyhe SB_RDONLY flag
in struct super. However, we didn't defer when we checked sb_rdonly()
to determine the lazy itable init thread should be enabled, with the
next result that the lazy inode table initialization would not be
properly started. This can cause generic/231 to fail in ext4's
nojournal mode.
Fix this by moving when we decide to start or stop the lazy itable
init thread to after we clear the SB_RDONLY flag when we are
remounting the file system read/write.
Fixes a44be64bbe ("ext4: don't clear SB_RDONLY when remounting r/w until...")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230527035729.1001605-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit e360c6ed72 ("ext4: Drop special handling of journalled data
from ext4_sync_file()") simplified ext4_sync_file() by dropping special
handling of journalled data mode as it was not needed anymore. However
that branch was also used for directories and symlinks and since the
fastcommit code does not track metadata changes to non-regular files, the
change has caused e.g. fsync(2) on directories to not commit transaction
as it should. Fix the problem by adding handling for non-regular files.
Fixes: e360c6ed72 ("ext4: Drop special handling of journalled data from ext4_sync_file()")
Reported-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/all/ZFqO3xVnmhL7zv1x@debian-BULLSEYE-live-builder-AMD64
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20230524104453.8734-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We don't need to set the list iterators to NULL before a
list_for_each_entry() loop because they are assigned inside the
macro.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
last component point filename struct. Currently putname is called after
vfs_path_parent_lookup(). And then last component is used for
lookup_one_qstr_excl(). name in last component is freed by previous
calling putname(). And It cause file lookup failure when testing
generic/464 test of xfstest.
Fixes: 74d7970feb ("ksmbd: fix racy issue from using ->d_parent and ->d_name")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If filesystem support sparse file, ksmbd should return allocated size
using ->i_blocks instead of stat->size. This fix generic/694 xfstests.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If opinfo->conn is another connection and while ksmbd send oplock break
request to cient on current connection, The connection for opinfo->conn
can be disconnect and conn could be freed. When sending oplock break
request, this ksmbd_conn can be used and cause user-after-free issue.
When getting opinfo from the list, ksmbd check connection is being
released. If it is not released, Increase ->r_count to wait that connection
is freed.
Cc: stable@vger.kernel.org
Reported-by: Per Forlin <per.forlin@axis.com>
Tested-by: Per Forlin <per.forlin@axis.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Check the remaining data length before accessing the context structure
to ensure that the entire structure is contained within the packet.
Additionally, since the context data length `ctxt_len` has already been
checked against the total packet length `len_of_ctxts`, update the
comparison to use `ctxt_len`.
Cc: stable@vger.kernel.org
Signed-off-by: Kuan-Ting Chen <h3xrabbit@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch fix the failure from smb2.credits.single_req_credits_granted
test. When client send 8192 credit request, ksmbd return 8191 credit
granted. ksmbd should give maximum possible credits that must be granted
within the range of not exceeding the max credit to client.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is a case that file_present is true and path is uninitialized.
This patch change file_present is set to false by default and set to
true when patch is initialized.
Fixes: 74d7970feb ("ksmbd: fix racy issue from using ->d_parent and ->d_name")
Reported-by: Coverity Scan <scan-admin@coverity.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Uninitialized rd.delegated_inode can be used in vfs_rename().
Fix this by setting rd.delegated_inode to NULL to avoid the uninitialized
read.
Fixes: 74d7970feb ("ksmbd: fix racy issue from using ->d_parent and ->d_name")
Reported-by: Coverity Scan <scan-admin@coverity.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When compiling on a MIPS 64-bit machine we get these warnings:
In file included from ./arch/mips/include/asm/cacheflush.h:13,
from ./include/linux/cacheflush.h:5,
from ./include/linux/highmem.h:8,
from ./include/linux/bvec.h:10,
from ./include/linux/blk_types.h:10,
from ./include/linux/blkdev.h:9,
from fs/btrfs/disk-io.c:7:
fs/btrfs/disk-io.c: In function ‘csum_tree_block’:
fs/btrfs/disk-io.c:100:34: error: array subscript 1 is above array bounds of ‘struct page *[1]’ [-Werror=array-bounds]
100 | kaddr = page_address(buf->pages[i]);
| ~~~~~~~~~~^~~
./include/linux/mm.h:2135:48: note: in definition of macro ‘page_address’
2135 | #define page_address(page) lowmem_page_address(page)
| ^~~~
cc1: all warnings being treated as errors
We can check if i overflows to solve the problem. However, this doesn't make
much sense, since i == 1 and num_pages == 1 doesn't execute the body of the loop.
In addition, i < num_pages can also ensure that buf->pages[i] will not cross
the boundary. Unfortunately, this doesn't help with the problem observed here:
gcc still complains.
To fix this add a compile-time condition for the extent buffer page
array size limit, which would eventually lead to eliminating the whole
for loop.
CC: stable@vger.kernel.org # 5.10+
Signed-off-by: pengfuyuan <pengfuyuan@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This fixes the following warning reported by gcc 10.2.1 under x86_64:
../fs/btrfs/tree-log.c: In function ‘btrfs_log_inode’:
../fs/btrfs/tree-log.c:6211:9: error: ‘last_range_start’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
6211 | ret = insert_dir_log_key(trans, log, path, key.objectid,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
6212 | first_dir_index, last_dir_index);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../fs/btrfs/tree-log.c:6161:6: note: ‘last_range_start’ was declared here
6161 | u64 last_range_start;
| ^~~~~~~~~~~~~~~~
This might be a false positive fixed in later compiler versions but we
want to have it fixed.
Reported-by: k2ci <kernel-bot@kylinos.cn>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Shida Zhang <zhangshida@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When I implemented the storage layer bio splitting, I was under the
assumption that we'll never split metadata bios. But Qu reminded me that
this can actually happen with very old file systems with unaligned
metadata chunks and RAID0.
I still haven't seen such a case in practice, but we better handled this
case, especially as it is fairly easily to do not calling the ->end_іo
method directly in btrfs_end_io_work, and using the proper
btrfs_orig_bbio_end_io helper instead.
In addition to the old file system with unaligned metadata chunks case
documented in the commit log, the combination of the new scrub code
with Johannes pending raid-stripe-tree also triggers this case. We
spent some time debugging it and found that this patch solves
the problem.
Fixes: 103c19723c ("btrfs: split the bio submission path into a separate file")
CC: stable@vger.kernel.org # 6.3+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull btrfs fixes from David Sterba:
- handle memory allocation error in checksumming helper (reported by
syzbot)
- fix lockdep splat when aborting a transaction, add NOFS protection
around invalidate_inode_pages2 that could allocate with GFP_KERNEL
- reduce chances to hit an ENOSPC during scrub with RAID56 profiles
* tag 'for-6.4-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: use nofs when cleaning up aborted transactions
btrfs: handle memory allocation failure in btrfs_csum_one_bio
btrfs: scrub: try harder to mark RAID56 block groups read-only
Pull smb directory moves and client fixes from Steve French:
"Four smb3 client fixes (three of which marked for stable) and three
patches to move of fs/cifs and fs/ksmbd to a new common "fs/smb"
parent directory
- Move the client and server source directories to a common parent
directory:
fs/cifs -> fs/smb/client
fs/ksmbd -> fs/smb/server
fs/smbfs_common -> fs/smb/common
- important readahead fix
- important fix for SMB1 regression
- fix for missing mount option ("mapchars") in mount API conversion
- minor debugging improvement"
* tag '6.4-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: move Documentation/filesystems/cifs to Documentation/filesystems/smb
cifs: correct references in Documentation to old fs/cifs path
smb: move client and server files to common directory fs/smb
cifs: mapchars mount option ignored
smb3: display debug information better for encryption
cifs: fix smb1 mount regression
cifs: Fix cifs_limit_bvec_subset() to correctly check the maxmimum size
Pull vfs fixes from Christian Brauner:
- During the acl rework we merged this cycle the generic_listxattr()
helper had to be modified in a way that in principle it would allow
for POSIX ACLs to be reported. At least that was the impression we
had initially. Because before the acl rework POSIX ACLs would be
reported if the filesystem did have POSIX ACL xattr handlers in
sb->s_xattr. That logic changed and now we can simply check whether
the superblock has SB_POSIXACL set and if the inode has
inode->i_{default_}acl set report the appropriate POSIX ACL name.
However, we didn't realize that generic_listxattr() was only ever
used by two filesystems. Both of them don't support POSIX ACLs via
sb->s_xattr handlers and so never reported POSIX ACLs via
generic_listxattr() even if they raised SB_POSIXACL and did contain
inodes which had acls set. The example here is nfs4.
As a result, generic_listxattr() suddenly started reporting POSIX
ACLs when it wouldn't have before. Since SB_POSIXACL implies that the
umask isn't stripped in the VFS nfs4 can't just drop SB_POSIXACL from
the superblock as it would also alter umask handling for them.
So just have generic_listxattr() not report POSIX ACLs as it never
did anyway. It's documented as such.
- Our SB_* flags currently use a signed integer and we shift the last
bit causing UBSAN to complain about undefined behavior. Switch to
using unsigned. While the original patch used an explicit unsigned
bitshift it's now pretty common to rely on the BIT() macro in a lot
of headers nowadays. So the patch has been adjusted to use that.
- Add Namjae as ntfs reviewer. They're already active this cycle so
let's make it explicit right now.
* tag 'vfs/v6.4-rc3/misc.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ntfs: Add myself as a reviewer
fs: don't call posix_acl_listxattr in generic_listxattr
fs: fix undefined behavior in bit shift for SB_NOUSER
The fs/cifs directory has moved to fs/smb/client, correct mentions
of this in Documentation and comments.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Move CIFS/SMB3 related client and server files (cifs.ko and ksmbd.ko
and helper modules) to new fs/smb subdirectory:
fs/cifs --> fs/smb/client
fs/ksmbd --> fs/smb/server
fs/smbfs_common --> fs/smb/common
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
There are two ways that special characters (not allowed in some
other operating systems like Windows, but allowed in POSIX) have
been mapped in the past ("SFU" and "SFM" mappings) to allow them
to be stored in a range reserved for special chars. The default
for Linux has been to use "mapposix" (ie the SFM mapping) but
the conversion to the new mount API in the 5.11 kernel broke
the ability to override the default mapping of the reserved
characters (like '?' and '*' and '\') via "mapchars" mount option.
This patch fixes that - so can now mount with "mapchars"
mount option to override the default ("mapposix" ie SFM) mapping.
Reported-by: Tyler Spivey <tspivey8@gmail.com>
Fixes: 24e0a1eff9 ("cifs: switch to new mount api")
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix /proc/fs/cifs/DebugData to use the same case for "encryption"
(ie "Encryption" with init capital letter was used in one place).
In addition, if gcm256 encryption (intead of gcm128) is used on
a connection to a server, note that in the DebugData as well.
It now displays (when gcm256 negotiated):
Security type: RawNTLMSSP SessionId: 0x86125800bc000b0d encrypted(gcm256)
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
cifs.ko maps NT_STATUS_NOT_FOUND to -EIO when SMB1 servers couldn't
resolve referral paths. Proceed to tree connect when we get -EIO from
dfs_get_referral() as well.
Reported-by: Kris Karas (Bug Reporting) <bugs-a21@moonlit-rail.com>
Tested-by: Woody Suwalski <terraluna977@gmail.com>
Fixes: 8e3554150d ("cifs: fix sharing of DFS connections")
Cc: stable@vger.kernel.org # v6.2+
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull erofs fixes from Gao Xiang:
"One patch addresses a null-ptr-deref issue reported by syzbot weeks
ago, which is caused by the new long xattr name prefix feature and
needs to be fixed.
The remaining two patches are minor cleanups to avoid unnecessary
compilation and adjust per-cpu kworker configuration.
Summary:
- Fix null-ptr-deref related to long xattr name prefixes
- Avoid pcpubuf compilation if CONFIG_EROFS_FS_ZIP is off
- Use high priority kthreads by default if per-cpu kthread workers
are enabled"
* tag 'erofs-for-6.4-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: use HIPRI by default if per-cpu kthreads are enabled
erofs: avoid pcpubuf.c inclusion if CONFIG_EROFS_FS_ZIP is off
erofs: fix null-ptr-deref caused by erofs_xattr_prefixes_init
notify_change can modify the iattr structure. In particular it can
end up setting ATTR_MODE when ATTR_KILL_SUID is already set, causing
a BUG() if the same iattr is passed to notify_change more than once.
Make a copy of the struct iattr before calling notify_change.
Reported-by: Zhi Li <yieli@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2207969
Tested-by: Zhi Li <yieli@redhat.com>
Fixes: 34b91dda71 ("NFSD: Make nfsd4_setattr() wait before returning NFS4ERR_DELAY")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Pull NFS client fixes from Anna Schumaker:
"Stable Fix:
- Don't change task->tk_status after the call to rpc_exit_task
Other Bugfixes:
- Convert kmap_atomic() to kmap_local_folio()
- Fix a potential double free with READ_PLUS"
* tag 'nfs-for-6.4-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4.2: Fix a potential double free with READ_PLUS
SUNRPC: Don't change task->tk_status after the call to rpc_exit_task
NFS: Convert kmap_atomic() to kmap_local_folio()
Pull ksmbd server fixes from Steve French:
- two fixes for incorrect SMB3 message validation (one for client which
uses 8 byte padding, and one for empty bcc)
- two fixes for out of bounds bugs: one for username offset checks (in
session setup) and the other for create context name length checks in
open requests
* tag '6.4-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: smb2: Allow messages padded to 8byte boundary
ksmbd: allocate one more byte for implied bcc[0]
ksmbd: fix wrong UserName check in session_user
ksmbd: fix global-out-of-bounds in smb2_find_context_vals
