Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
Pull drm updates from Dave Airlie:
"There are a bunch of changes all over in the usual places.
Highlights:
- habanalabs moves from misc to accel
- first accel driver for Intel VPU (Versatile Processing Unit)
inference engine
- dropped all the ancient legacy DRI1 drivers. I think it's been at
least 10 years since anyone has heard about these.
- Intel DG2 updates and prelim Meteorlake enablement
- etnaviv adds support for Versilicon NPU device (a GPU like engine
with inference accelerators)
Detailed summary:
Removals:
- remove legacy dri1 drivers: i810, mga, r128, savage, sis, tdfx, via
New driver:
- intel VPU accelerator driver
- habanalabs comes via drm tree now
drm/core:
- use drm_dbg_ helpers in several places
- Document defaults for CRTC backgrounds
- Document use of drm_minor
edid:
- improve mode parsing and refactoring
connector:
- support analog TV mode property
media:
- add some common formats
udmabuf:
- add vmap/vunmap methods
fourcc:
- add XRGB1555 and RGB565 formats
- document open source user waiver
firmware:
- fix color-format selection for system framebuffer
format-helper:
- Add conversion from XRGB8888 to various sysfb formats
- Make XRGB8888 the only driver-emulated legacy format
- Add conversion from XRGB8888 to XBGR8888 and ABGR8888
fb-helper:
- fix preferred depth and bpp values across drivers
- Avoid blank consoles from selecting an incorrect color format
probe-helper:
- Enable/disable HPD on connectors
scheduler:
- Fix lockup in drm_sched_entity_kill()
- Deprecate drm_sched_resubmit_jobs()
bridge:
- remove unused functions
- implement i2c probe_new in various drivers
- ite-it6505: Locking fixes, Cache EDID data
- ite-it66121: Support IT6610 chip
- lontium-tl9611: Fix HDMI on DragonBoard 845c
- parade-ps8640: Use atomic bridge functions
- Support i.MX93 LDB plus DT bindings
debugfs:
- add per device helpers and convert drivers
displayport:
- mst fixes
- add DP adaptive sync DPCD definitions
fbdev:
- always pick 32bpp as default
- remove some unused code
simpledrm:
- support system memory framebuffers
panel:
- add orientation quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50
- Use ktime_get_boottime() to measure power-down delay
- Fix auto-suspend delay
- Visionox VTDR6130 AMOLED DSI
- Support Himax HX8394
- Convert many drivers to common generic DSI write-sequence helper
- AUO A030JTN01
ttm:
- drop bo wait wrapper
- fix MIPS build
habanalabs:
- moved driver to accel subsystem
- gaudi2 decoder error improvement
- more trace events
- Gaudi2 abrupt reset by firmware support
- add uAPI to flush memory transactions
- add uAPI to pass through userspace reqs to fw
- remove dma-buf export by handle
amdgpu:
- add new INFO queries for peak and min sclk/mclk for profile modes
- Add PCIe info to the INFO IOCTL
- secure display support for multiple displays
- DML optimizations
- DCN 3.2 updates
- PSR updates
- DP 2.1 updates
- SR-IOV RAS updates
- VCN RAS support
- SMU 13.x updates
- Switch 1 element arrays to flexible arrays
- Add RAS support for DF 4.3
- Stack size improvements
- S0ix rework
- Allow 0 as a vram limit on APUs
- Handle profiling modes for SMU13.x
- Fix possible segfault in failure case
- Rework FW requests to happen in early_init for all IPs so that we
don't lose the sbios console if FW is missing
- Fix power reporting on certain firmwares for CZN/RN
- Allow S0ix without BIOS support
- Enable freesync over PCon
- Re-enable the AGP aperture on GMC 11.x
amdkfd:
- Error handling fixes
- PASID fixes
- Fix for cleared VRAM BOs
- Fix cleanup if GPUVM creation fails
- Memory accounting fix
- Use resource_size rather than open codeing it
- GC11 mGPU fix
radeon:
- Switch 1 element arrays to flexible arrays
- Fix memory leak on shutdown
- move to new logging
i915:
- Meteorlake display/OA/GSC fw/workarounds enabling
- DP MST DSC support
- Gamma/degamma readout support for the state checker
- Enable SDP split support for DP 2.0
- Add probe blocking support to i915.force_probe parameter
- Enable Xe HP 4tile support
- Avoid display direct calls to uncore
- Fix HuC delayed load memory leaks
- Add DG2 workarounds Wa_18018764978 and Wa_18019271663
- Improve suspend / resume times with VT-d scanout workaround active
- Fix DG2 visual corruption on small BAR systems by not forgetting to
copy CCS aux state
- Fix TLB invalidation for Gen12.50 video and compute engines
- Enable HF-EEODB by switching HDMI, DP and LVDS to use struct
drm_edid
- Start using unversioned DMC firmware paths for new platforms
- ELD refactor: Stop using hardware buffer, precompute ELD
- lots of display code refactoring
nouveau:
- drop legacy ioctl support
- replace 0-sized array
msm:
- dpu/dsi/mdss: Support for SM8350, SM8450 SM8550 and SC8280XP platform
- Added bindings for SM8150
- dpu: Partial support for DSC on SM8150 and SM8250
- dpu: Fixed color transformation matrix being lost on suspend/resume
- dp: Support SDM845 and SC8280XP platforms
- dp: Support for limiting DP link rate via DT property
- dsi: Validate display modes according to the DSI OPP table
- dsi: DSI PHY support for the SM6375 platform
- Add MSM_SUBMIT_BO_NO_IMPLICI
- a2xx: Support to load legacy firmware
- a6xx: GPU devcore dump updates for a650/a660
- GPU devfreq tuning and fixes
- Turn 8960 HDMI PHY into clock provider,
- Make 8960 HDMI PHY use PXO clock from DT
etnaviv:
- experimental versilicon NPU support
- report GPU load via fdinfo format
- MMU fault message improvements
tegra:
- rework syncpoint interrupt
mediatek:
- DSI timing fix
- fix config deps
ast:
- various fixes
exynos:
- restore bridge chain order fixes
gud:
- convert to shadow plane buffers
- perform flushing synchronously during atomic update
- Use new debugfs helpers
arm/hdlcd:
- Use new debugfs helper
ili9486:
- Support 16-bit pixel data
imx:
- Split off IPUv3 driver
mipi-dbi:
- convert to DRM shadow-plane helpers
- rsp driver changes
- Support separate I/O-voltage supply
mxsfb:
- Depend on ARCH_MXS or ARCH_MXC
sun4i:
- convert to new TV mode property
vc4:
- convert to new TV mode property
- kunit tests
- Support RGB565 and RGB666 formats
- convert dsi driver to bridge
- Various HVS an CRTC fixes
v3d:
- Do not opencode drm_gem_object_lookup()
virtio:
- improve tracing
vkms:
- support small cursors in IGT tests
- Fix SEGFAULT from incorrect GEM-buffer mapping
rcar-du:
- fixes and improvements"
* tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drm: (1455 commits)
msm/fbdev: fix unused variable warning with clang.
drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini()
dma-buf: make kobj_type structure constant
drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()
drm/amd/display: disable SubVP + DRR to prevent underflow
drm/amd/display: Fail atomic_check early on normalize_zpos error
drm/amd/pm: avoid unaligned access warnings
drm/amd/display: avoid unaligned access warnings
drm/amd/display: Remove duplicate/repeating expressions
drm/amd/display: Remove duplicate/repeating expression
drm/amd/display: Make variables declaration inside ifdef guard
drm/amd/display: Fix excess arguments on kernel-doc
drm/amd/display: Add previously missing includes
drm/amd/amdgpu: Add function prototypes to headers
drm/amd/display: Add function prototypes to headers
drm/amd/display: Turn global functions into static
drm/amd/display: remove unused _calculate_degamma_curve function
drm/amd/display: remove unused func declaration from resource headers
drm/amd/display: unset initial value for tf since it's never used
drm/amd/display: camel case cleanup in color_gamma file
...
This time we've added support for reporting of GPU load via the common
fdinfo format, as already supported by multiple other drivers. Improved
diagnostic messages for MMU faults. And finally added experimental
support for driving the VeriSilicon NPU cores, which are very close
relatives to the GPU designs, so close in fact that they can run the
same compute instruction set, but with a big NN-fabric/matrix/tensor
execution array glued to the side.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/80ceb4eedf7d88e434deeb69607d5ce0a0759581.camel@pengutronix.de
Track the accumulated time that jobs from this entity were active
on the GPU. This allows drivers using the scheduler to trivially
implement the DRM fdinfo when the hardware doesn't provide more
specific information than signalling job completion anyways.
[Bagas: Append missing colon to @elapsed_ns]
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
We reference dump buffers both by their handle as well as their
object. The problem is now that when anybody iterates over the DRM
framebuffers and exports the underlying GEM objects through DMA-buf
we run into a circular reference count situation.
The result is that the fbdev handling holds the GEM handle preventing
the DMA-buf in the GEM object to be released. This DMA-buf in turn
holds a reference to the driver module which on unload would release
the fbdev.
Break that loop by releasing the handle as soon as the DRM
framebuffer object is created. The DRM framebuffer and the DRM client
buffer structure still hold a reference to the underlying GEM object
preventing its destruction.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: c76f0f7cb5 ("drm: Begin an API for in-kernel clients")
Cc: <stable@vger.kernel.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230126102814.8722-1-christian.koenig@amd.com
Due to holidays we started -next with more -fixes in-flight than
usual, and people have been asking where they are. Backmerge to get
things better in sync.
Conflicts:
- Tiny conflict in drm_fbdev_generic.c between variable rename and
missing error handling that got added.
- Conflict in drm_fb_helper.c between the added call to vgaswitcheroo
in drm_fb_helper_single_fb_probe and a refactor patch that extracted
lots of helpers and incidentally removed the dev local variable.
Readd it to make things compile.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This tag contains habanalabs driver and accel changes for v6.3:
- Moved the driver to the accel subsystem. Currently only the files were
moved (including the uapi file which was also renamed). This doesn't
include registering to the accel subsystem. This will probably be only
in the next kernel version.
- In case of decoder error (axi error) in Gaudi2, we can now find the exact
IP that initiated the erroneous transaction and print the details for
better debug.
- Add more trace events. We now can trace mmio transactions and communication
with the preboot firmware.
- Add to Gaudi2 support for abrupt reset that is done by the firmware. This
was support so far only for Gaudi1.
- Add uAPI to flush memory transactions (to the device memory). This is
needed by the communications library in case of doing p2p with a host NIC
which access our HBM directly through the PCI BAR.
- Add uAPI to pass-through a request from user-space to firmware and get the
result back to user-space. This will allow the driver code to avoid the
need to add new packet (in the communication channel with the firmware) for
every new request type.
- Remove the option to export dma-buf by memory allocation handle in our uAPI.
This was planned for Gaudi2 but was never used. Instead, we will do export
by memory address (same as Gaudi1). In addition, we added the option to
specify an offset to the address. This is needed in Gaudi2 because there
the user allocates the entire HBM in one allocation, but would like to
export only small part of it.
- Multiple bug fixes, refactors and small optimizations.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230126213317.GA1520525@ogabbay-vm-u20.habana-labs.com
In reviewing the ivpu driver, DEFINE_DRM_ACCEL_FOPS could have been used
if DRM_ACCEL_FOPS defined .mmap to be drm_gem_mmap. Lets add that since
accel drivers are a variant of drm drivers, modern drm drivers are
expected to use GEM, and mmap() is a common operation that is expected
to be heavily used in accel drivers thus the common accel driver should
be able to just use DEFINE_DRM_ACCEL_FOPS() for convenience.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Initialize the fb-helper's preferred_bpp field early from within
drm_fb_helper_prepare(); instead of the later client hot-plugging
callback. This simplifies the generic fbdev setup function.
No real changes, but all drivers' fbdev code has to be adapted.
v3:
* build with CONFIG_DRM_FBDEV_EMULATION unset (kernel test bot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125200415.14123-7-tzimmermann@suse.de
Signal failed hotplugging with a flag in struct drm_client_dev. If set,
the client helpers will not further try to set up the fbdev display.
This used to be signalled with a combination of cleared pointers in
struct drm_fb_helper, which prevents us from initializing these pointers
early after allocation.
The change also harmonizes behavior among DRM clients. Additional DRM
clients will now handle failed hotplugging like fbdev does.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125200415.14123-3-tzimmermann@suse.de
The DRM fbdev emulation layer sets the struct fb_info .fbdefio field to
a struct fb_deferred_io pointer, that is shared across all drivers that
use the generic drm_fbdev_generic_setup() helper function.
It is a problem because the fbdev core deferred I/O logic assumes that
the struct fb_deferred_io data is not shared between devices, and it's
stored there state such as the list of pages touched and a mutex that
is use to synchronize between the fb_deferred_io_track_page() function
that track the dirty pages and fb_deferred_io_work() workqueue handler
doing the actual deferred I/O.
The latter can lead to the following error, since it may happen that two
drivers are probed and then one is removed, which causes the mutex bo be
destroyed and not existing anymore by the time the other driver tries to
grab it for the fbdev deferred I/O logic:
[ 369.756553] ------------[ cut here ]------------
[ 369.756604] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 369.756631] WARNING: CPU: 2 PID: 1023 at kernel/locking/mutex.c:582 __mutex_lock+0x348/0x424
[ 369.756744] Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ip
v6 nf_defrag_ipv4 ip_set nf_tables nfnetlink qrtr btsdio bluetooth sunrpc brcmfmac snd_soc_hdmi_codec cpufreq_dt cfg80211 vfat fat vc4 rfkill brcmutil raspberrypi_cpufreq i2c_bcm2835 iproc_rng200 bcm2711_thermal snd_soc_core snd_pcm_dmaen
gine leds_gpio nvmem_rmem joydev hid_cherry uas usb_storage gpio_raspberrypi_exp v3d snd_pcm raspberrypi_hwmon gpu_sched bcm2835_wdt broadcom bcm_phy_lib snd_timer genet snd mdio_bcm_unimac clk_bcm2711_dvp soundcore drm_display_helper pci
e_brcmstb cec ip6_tables ip_tables fuse
[ 369.757400] CPU: 2 PID: 1023 Comm: fbtest Not tainted 5.19.0-rc6+ #94
[ 369.757455] Hardware name: raspberrypi,4-model-b Raspberry Pi 4 Model B Rev 1.4/Raspberry Pi 4 Model B Rev 1.4, BIOS 2022.10 10/01/2022
[ 369.757538] pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 369.757596] pc : __mutex_lock+0x348/0x424
[ 369.757635] lr : __mutex_lock+0x348/0x424
[ 369.757672] sp : ffff80000953bb00
[ 369.757703] x29: ffff80000953bb00 x28: ffff17fdc087c000 x27: 0000000000000002
[ 369.757771] x26: ffff17fdc349f9b0 x25: fffffc5ff72e0100 x24: 0000000000000000
[ 369.757838] x23: 0000000000000000 x22: 0000000000000002 x21: ffffa618df636f10
[ 369.757903] x20: ffff80000953bb68 x19: ffffa618e0f18138 x18: 0000000000000001
[ 369.757968] x17: 0000000020000000 x16: 0000000000000002 x15: 0000000000000000
[ 369.758032] x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 5f534b434f4c5f47
[ 369.758097] x11: 00000000ffffdfff x10: ffffa618e0c79f88 x9 : ffffa618de472484
[ 369.758162] x8 : 000000000002ffe8 x7 : c0000000ffffdfff x6 : 00000000000affa8
[ 369.758227] x5 : 0000000000001fff x4 : 0000000000000000 x3 : 0000000000000027
[ 369.758292] x2 : 0000000000000001 x1 : ffff17fdc087c000 x0 : 0000000000000028
[ 369.758357] Call trace:
[ 369.758383] __mutex_lock+0x348/0x424
[ 369.758420] mutex_lock_nested+0x4c/0x5c
[ 369.758459] fb_deferred_io_mkwrite+0x78/0x1d8
[ 369.758507] do_page_mkwrite+0x5c/0x19c
[ 369.758550] wp_page_shared+0x70/0x1a0
[ 369.758590] do_wp_page+0x3d0/0x510
[ 369.758628] handle_pte_fault+0x1c0/0x1e0
[ 369.758670] __handle_mm_fault+0x250/0x380
[ 369.758712] handle_mm_fault+0x17c/0x3a4
[ 369.758753] do_page_fault+0x158/0x530
[ 369.758792] do_mem_abort+0x50/0xa0
[ 369.758831] el0_da+0x78/0x19c
[ 369.758864] el0t_64_sync_handler+0xbc/0x150
[ 369.758904] el0t_64_sync+0x190/0x194
[ 369.758942] irq event stamp: 11395
[ 369.758973] hardirqs last enabled at (11395): [<ffffa618de472554>] __up_console_sem+0x74/0x80
[ 369.759042] hardirqs last disabled at (11394): [<ffffa618de47254c>] __up_console_sem+0x6c/0x80
[ 369.760554] softirqs last enabled at (11392): [<ffffa618de330a74>] __do_softirq+0x4c4/0x6b8
[ 369.762060] softirqs last disabled at (11383): [<ffffa618de3c9124>] __irq_exit_rcu+0x104/0x214
[ 369.763564] ---[ end trace 0000000000000000 ]---
Fixes: d536540f30 ("drm/fb-helper: Add generic fbdev emulation .fb_probe function")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230121192418.2814955-4-javierm@redhat.com
The original goal with drm_edid_connector_update() was to have a single
call for updating the connector and adding probed modes, in this order,
but that turned out to be problematic. Drivers that need to update the
connector in the .detect() callback would end up updating the probed
modes as well. Turns out the callback may be called so many times that
the probed mode list fills up without bounds, and this is amplified by
add_alternate_cea_modes() duplicating the CEA modes on every call,
actually running out of memory on some machines.
Kudos to Imre Deak <imre.deak@intel.com> for explaining this to me.
Go back to having separate drm_edid_connector_update() and
drm_edid_connector_add_modes() calls. The former may be called from
.detect(), .force(), or .get_modes(), but the latter only from
.get_modes().
Unlike drm_add_edid_modes(), have drm_edid_connector_add_modes() update
the probed modes from the EDID property instead of the passed in
EDID. This is mainly to enforce two things:
1) drm_edid_connector_update() must be called before
drm_edid_connector_add_modes().
Display info and quirks are needed for parsing the modes, and we
don't want to call update_display_info() again to ensure the info is
available, like drm_add_edid_modes() does.
2) The same EDID is used for both updating the connector and adding the
probed modes.
Fortunately, the change is easy, because no driver has actually adopted
drm_edid_connector_update(). Not even i915, and that's mainly because of
the problem described above.
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e86fff1579f14ebf6334692526c8f6831cd02cac.1674144945.git.jani.nikula@intel.com
Backmerging into drm-misc-next to get DRM accelerator infrastructure,
which is required by ipuv driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
The MIPI DCS specification demands that brightness values are sent in
big endian byte order. It also states that one parameter (i.e. one byte)
shall be sent/received for 8 bit wide values, and two parameters shall
be used for values that are between 9 and 16 bits wide.
Add new functions to properly handle 16-bit brightness in big endian,
since the two 8- and 16-bit cases are distinct from each other.
[richard: use separate functions instead of switch/case]
[richard: split into 16-bit component]
Fixes: 1a9d759331 ("drm/dsi: Implement DCS set/get display brightness")
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Link: 754affd62d
[richard: fix 16-bit brightness_get]
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Tested-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116224909.23884-2-mailingradian@gmail.com
Several DRM core and helper source files include drm_crtc_helper.h
without needing it or only to get its transitive include statements;
leading to unnecessary compile-time dependencies.
Directly include required headers and drop drm_crtc_helper.h where
possible. The header file, drm_fixed.h, includes <linux/kernel.h>
for lower_32_bits().
v2:
* include drm_crtc_helper.h in drm_crtc_helper.c (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116131235.18917-3-tzimmermann@suse.de
drm-misc-next for v6.3:
UAPI Changes:
* fourcc: Document Open Source user waiver
Cross-subsystem Changes:
* firmware: fix color-format selection for system framebuffers
Core Changes:
* format-helper: Add conversion from XRGB8888 to various sysfb formats;
Make XRGB8888 the only driver-emulated legacy format
* fb-helper: Avoid blank consoles from selecting an incorrect color format
* probe-helper: Enable/disable HPD on connectors plus driver updates
* Use drm_dbg_ helpers in several places
* docs: Document defaults for CRTC backgrounds; Document use of drm_minor
Driver Changes:
* arm/hdlcd: Use new debugfs helpers
* gud: Use new debugfs helpers
* panel: Support Visionox VTDR6130 AMOLED DSI; Support Himax HX8394; Convert
many drivers to common generic DSI write-sequence helper
* v3d: Do not opencode drm_gem_object_lookup()
* vc4: Various HVS an CRTC fixes
* vkms: Fix SEGFAULT from incorrect GEM-buffer mapping
* Convert various drivers to i2c probe_new()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8ADeSzZDj+tpibF@linux-uq9g
The documentation for struct drm_minor already states this, but that's
not always that easy to find.
Also due to historical reasons we still have the minor-centric
interfaces (like drm_debugfs_create_files), but since this is now
getting fixed we can put a few more pointers in place as to how this
should be done ideally. Note that debugfs isn't there yet for all
cases (debugfs files on kms objects like crtc/connector aren't
supported, neither debugfs files with full fops), so the debugfs side
of this is still rather aspirational and more for new users than
converting everything existing. todo.rst covers the additional work
needed already.
Motivated by some discussion with Rodrigo on irc about how drm/xe
should lay out its sysfs interfaces.
v2: Make the debugfs situation clearer in the commit message, but
don't elaborate more in the actual kerneldoc to avoid distracting from
the main message around sysfs (Jani)
Also fix some typos.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Wambui Karuga <wambui.karugax@gmail.com>
Cc: Maíra Canal <mcanal@igalia.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Melissa Wen <mwen@igalia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230109164604.3860862-1-daniel.vetter@ffwll.ch
The structs drm_debugfs_info and drm_debugfs_entry don't have
descriptions for their parameters, which is causing the following warnings:
include/drm/drm_debugfs.h:93: warning: Function parameter or member
'name' not described in 'drm_debugfs_info'
include/drm/drm_debugfs.h:93: warning: Function parameter or member
'show' not described in 'drm_debugfs_info'
include/drm/drm_debugfs.h:93: warning: Function parameter or member
'driver_features' not described in 'drm_debugfs_info'
include/drm/drm_debugfs.h:93: warning: Function parameter or member
'data' not described in 'drm_debugfs_info'
include/drm/drm_debugfs.h:105: warning: Function parameter or member
'dev' not described in 'drm_debugfs_entry'
include/drm/drm_debugfs.h:105: warning: Function parameter or member
'file' not described in 'drm_debugfs_entry'
include/drm/drm_debugfs.h:105: warning: Function parameter or member
'list' not described in 'drm_debugfs_entry'
Therefore, fix the warnings by adding descriptions to all struct
parameters.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230105193039.287677-2-mcanal@igalia.com
Many panel drivers define dsi_dcs_write_seq() and dsi_generic_write_seq()
macros to send DCS commands and generic write packets respectively, with
the payload specified as a list of parameters instead of using arrays.
There's already a macro for the former, introduced by commit 2a9e9daf75
("drm/mipi-dsi: Introduce mipi_dsi_dcs_write_seq macro") so drivers can be
changed to use that. But there isn't one yet for the latter, let's add it.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102202542.3494677-2-javierm@redhat.com
drm-misc-next for v6.3:
UAPI Changes:
* connector: Support analog-TV mode property
* media: Add MEDIA_BUS_FMT_RGB565_1X24_CPADHI,
MEDIA_BUS_FMT_RGB666_1X18 and MEDIA_BUS_FMT_RGB666_1X24_CPADHI
Cross-subsystem Changes:
* dma-buf: Documentation fixes
* i2c: Introduce i2c_client_get_device_id() helper
Core Changes:
* Improve support for analog TV output
* bridge: Remove unused drm_bridge_chain functions
* debugfs: Add per-device helpers and convert various DRM drivers
* dp-mst: Various fixes
* fbdev emulation: Always pick 32 bpp as default
* KUnit: Add tests for managed helpers; Various cleanups
* panel-orientation: Add quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50
* TTM: Open-code ttm_bo_wait() and remove the helper
Driver Changes:
* Fix preferred depth and bpp values throughout DRM drivers
* Remove #CONFIG_PM guards throughout DRM drivers
* ast: Various fixes
* bridge: Implement i2c's probe_new in various drivers; Fixes; ite-it6505:
Locking fixes, Cache EDID data; ite-it66121: Support IT6610 chip,
Cleanups; lontium-tl9611: Fix HDMI on DragonBoard 845c; parade-ps8640:
Use atomic bridge functions
* gud: Convert to DRM shadow-plane helpers; Perform flushing synchronously
during atomic update
* ili9486: Support 16-bit pixel data
* imx: Split off IPUv3 driver; Various fixes
* mipi-dbi: Convert to DRM shadow-plane helpers plus rsp driver changes;i
Support separate I/O-voltage supply
* mxsfb: Depend on ARCH_MXS or ARCH_MXC
* omapdrm: Various fixes
* panel: Use ktime_get_boottime() to measure power-down delay in various
drivers; Fix auto-suspend delay in various drivers; orisetech-ota5601a:
Add support
* sprd: Cleanups
* sun4i: Convert to new TV-mode property
* tidss: Various fixes
* v3d: Various fixes
* vc4: Convert to new TV-mode property; Support Kunit tests; Cleanups;
dpi: Support RGB565 and RGB666 formats; dsi: Convert DSI driver to
bridge
* virtio: Improve tracing
* vkms: Support small cursors in IGT tests; Various fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y7QIwlfElAYWxRcR@linux-uq9g
The DRM helper drm_fb_build_fourcc_list() creates a list of color
formats for primary planes of the generic drivers. Simplify the helper:
- It used to mix and filter native and emulated formats as provided
by the driver. Now the only emulated format is XRGB8888, which is
required as fallback by legacy software. Drop support for emulating
any other formats.
- Also convert alpha formats to their non-alpha counterparts. Generic
drivers don't support primary planes with alpha formats and some
DTs incorrectly advertise alpha channels for non-alpha hardware. So
only export non-alpha formats for primary planes.
With the simplified helper, scrap format lists of the affected generic
drivers. All they need is the firmware buffer's native format, from which
the helper creates the list of color formats.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-13-tzimmermann@suse.de
Add conversion from XRGB8888 to XRGB1555, ARGB1555 and RGBA5551, which
are the formats currently supported by the simplefb infrastructure. The
new helpers allow the output of XRGB8888 framebuffers to firmware
scanout buffers in one of the 15-bit formats.
v3:
* use __le* for destination buffers (Jose, kernel test robot)
v2:
* test 15-bit results with local endianness (Jose)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-10-tzimmermann@suse.de
drm-misc-next for 6.2:
Cross-subsystem Changes:
- fbdev: Make fb_modesetting_disabled() static
- udmabuf: Add vmap and vunmap methods to udmabuf_ops
Core Changes:
- doc: make drm-uapi igt-tests more readable
- fb-helper: Revert of the damage worker removal
- fourcc: Add missing big-endian XRGB1555 and RGB565 formats
- gem-shmem: Fix for resource leakage in __drm_gem_shmem_create()
- scheduler: Fix lockup in drm_sched_entity_kill()
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221124074615.ahflw5q5ktfdsr7k@houat
