There are two options that are selected by all tracers, but we want
to have those options available when no tracer is selected. These are
The event tracer and sched switch tracer.
The are enabled by all tracers, but if a tracer is not selected we want
the options to appear. All tracers including them select TRACING.
Thus what we would like to do is:
config EVENT_TRACER
bool "prompt"
depends on TRACING
select TRACING
But that gives us a bug in the kbuild system since we just created a
circular dependency. We only want the prompt to show when TRACING is off.
This patch adds GENERIC_TRACER that all tracers will select instead of
TRACING. The two options (sched switch and event tracer) will select
TRACING directly and depend on !GENERIC_TRACER. This solves the cicular
dependency.
[ Impact: hide options that are selected by default ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When using ftrace=function on the command line to trace functions
on boot up, one can not filter out functions that are commonly called.
This patch adds two new ftrace command line commands.
ftrace_notrace=function-list
ftrace_filter=function-list
Where function-list is a comma separated list of functions to filter.
The ftrace_notrace will make the functions listed not be included
in the function tracing, and ftrace_filter will only trace the functions
listed.
These two act the same as the debugfs/tracing/set_ftrace_notrace and
debugfs/tracing/set_ftrace_filter respectively.
The simple glob expressions that are allowed by the filter files can also
be used by the command line interface.
ftrace_notrace=rcu*,*lock,*spin*
Will not trace any function that starts with rcu, ends with lock, or has
the word spin in it.
Note, if the self tests are enabled, they may interfere with the filtering
set by the command lines.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix SCI transmission sequence in console output function.
This reorders the write sequence to match the SH-3 manual, and corrects
a console corruption bug observed on SH-3 SCI.
Signed-off-by: Toshinobu Sugioka <sugioka@itonet.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
CONFIG_SH_PCLK_FREQ=33333333 is correct for sh7724.
sh7724 master clock is 33333333, but peripheral is 41666666.
This bug came to light because sh-sci driver had changed clk
from "module_clk" to "peripheral_clk"
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This has also a nice side effect, tools built on newer systems such as
fedora 10 again work on systems with older versions of glibc:
My workstation:
[acme@doppio ~]$ rpm -q glibc.x86_64
glibc-2.9-3.x86_64
Test machine:
[acme@emilia ~]$ rpm -q glibc.x86_64
glibc-2.5-24
Before:
[acme@emilia ~]$ perf
perf: /lib64/libc.so.6: version `GLIBC_2.7' not found (required by perf)
[acme@emilia ~]$ nm `which perf` | grep GLIBC_2\.7
U __isoc99_sscanf@@GLIBC_2.7
[acme@emilia ~]$
After:
[acme@emilia ~]$ perf
usage: perf [--version] [--help] COMMAND [ARGS]
The most commonly used perf commands are:
record Run a command and record its profile into perf.data
report Read perf.data (created by perf record) and display the
profile
stat Run a command and gather performance counter statistics
top Run a command and profile it
See 'perf help COMMAND' for more information on a specific command.
[acme@emilia ~]$ nm `which perf` | grep GLIBC_2\.7
[acme@emilia ~]$
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090601205019.GA7805@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add hex conversion libraries. We are going to replace sscanf()
uses with them.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It was __devinit, but it is also within a CONFIG_HOTPLUG guarded section
of code, so the __devinit does nothing but cause the following warning:
WARNING: vmlinux.o(.text+0x107a8): Section mismatch in reference from the function pcibios_finish_adding_to_bus() to the function .devinit.text:pcibios_claim_one_bus()
The function pcibios_finish_adding_to_bus() references
the function __devinit pcibios_claim_one_bus().
This is often because pcibios_finish_adding_to_bus lacks a __devinit
annotation or the annotation of pcibios_claim_one_bus is wrong.
It is also only (externally) used in arch/powerpc/kernel/of_platform.c
which cannot be built as a module so don't export it.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
These macros were used in the original port, but since commit
e4486fe316 (ftrace, use probe_kernel API to modify code) they
are unused.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This patch updates the output from /proc/ppc64/lparcfg to display the
processor virtualization resource allocations for a shared processor
partition.
This information is already gathered via the h_get_ppp call, we just
have to make sure that the ibm,partition-performance-parameters-level
property is >= 1 to ensure that the information is valid.
Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
RTAS event scan has to run across all cpus. Right now we use a kernel
thread and set_cpus_allowed but in doing so we wake up the previous cpu
unnecessarily.
Some ftrace output shows this:
previous cpu (2):
[002] 7.022331: sched_switch: task swapper:0 [140] ==> rtasd:194 [120]
[002] 7.022338: sched_switch: task rtasd:194 [120] ==> migration/2:9 [0]
[002] 7.022344: sched_switch: task migration/2:9 [0] ==> swapper:0 [140]
next cpu (3):
[003] 7.022345: sched_switch: task swapper:0 [140] ==> rtasd:194 [120]
[003] 7.022371: sched_switch: task rtasd:194 [120] ==> swapper:0 [140]
We can use schedule_delayed_work_on and avoid the unnecessary wakeup.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This bit would get enabled sometimes (probably after suspend/resume), so the
fan would run at full speed below the temperature thresholds, but slow down and
eventually stop if temperatures rose above the thresholds... not exactly what
you want.
Signed-off-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
We can compile and boot with NR_CPUS=8192, so make this the max. 1024
was an arbitrary decision anyway.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Fix the fact that the IOAPIC version number in the x86_64 code path always
gets assigned to 0, instead of the correct value.
Before the patch: (from "dmesg" output):
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 <---
After the patch:
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 <---
History:
io_apic_get_version() was compiled out of the x86_64 code path in the commit
f2c2cca3ac:
Author: Andi Kleen <ak@suse.de>
Date: Tue Sep 26 10:52:37 2006 +0200
[PATCH] Remove APIC version/cpu capability mpparse checking/printing
ACPI went to great trouble to get the APIC version and CPU capabilities
of different CPUs before passing them to the mpparser. But all
that data was used was to print it out. Actually it even faked some data
based on the boot cpu, not on the actual CPU being booted.
Remove all this code because it's not needed.
Cc: len.brown@intel.com
At the time, the IOAPIC version number was deliberately not printed
in the x86_64 code path. However, after the x86 and x86_64 files were
merged, the net result is that the IOAPIC version is printed incorrectly
in the x86_64 code path.
The patch below provides a fix. I have tested it with acpi, and with
acpi=off, and did not see any problems.
Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Acked-by: Yinghai Lu <yhlu.kernel@gmail.com>
LKML-Reference: <20090416014230.4885.94926.sendpatchset@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
*************************
The reset of a BUS controller during operations is somehow risky and
shouldn't be done inevitably for devices that have apparently no such
codec-communication problems.
This patch adds the check of the hardware and limits the bus-reset
capability.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some machines machine cause a severe CORB/RIRB stall in certain
weird conditions, such as PA access at the start up together with
fglrx driver. This seems unable to be recovered without the controller
reset.
This patch allows the bus controller reset at critical errors so
that the communication gets recovered again.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
register_stat_tracer() uses list_for_each_entry_safe
to check whether a tracer is already present in the list.
But we don't delete anything from the list here, so
we don't need the safe version
[ Impact: cleanup list use is stat tracing ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
- remove duplicate code in stat_seq_init()
- update comments to reflect the change from stat list to stat rbtree
[ Impact: clean up ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
When closing a trace_stat file, we destroy the rbtree constructed during
file open, but there is memory leak that the root node is not freed.
[ Impact: fix memory leak when closing a trace_stat file ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Currently the output of trace_stat/workqueues is totally reversed:
# cat /debug/tracing/trace_stat/workqueues
...
1 17 17 210 37 `-blk_unplug_work+0x0/0x57
1 3779 3779 181 11 |-cfq_kick_queue+0x0/0x2f
1 3796 3796 kblockd/1:120
...
The correct output should be:
1 3796 3796 kblockd/1:120
1 3779 3779 181 11 |-cfq_kick_queue+0x0/0x2f
1 17 17 210 37 `-blk_unplug_work+0x0/0x57
It's caused by "tracing/stat: replace linked list by an rbtree for
sorting"
(53059c9b67a62a3dc8c80204d3da42b9267ea5a0).
dummpy_cmp() should return -1, so rb_node will always be inserted as
right-most node in the rbtree, thus we sort the output in ascending
order.
[ Impact: fix the output of trace_stat/workqueues ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
When the stat tracing framework prepares the entries from a tracer
to output them to the user, it starts by computing a linear sort
through a linked list to give the entries ordered by relevance
to the user.
This is quite ugly and causes a small latency when we begin to
read the file.
This patch changes that by turning the linked list into a red-black
tree. Athough the whole iteration using the start and next tracer
callbacks while opening the file remain the same, it is now much
more fast and scalable.
The rbtree guarantees O(log(n)) insertions whereas a linked
list with linear sorting brought us a O(n) despair. Now the
(visible) latency has disapeared.
[ Impact: kill the latency while starting to read a stat tracer file ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The "trace" prefix in struct trace_stat_session type is annoying while
reading the trace_stat.c file. It makes the lines longer, and
is not that much useful to explain the sense of this type.
Just keep "struct stat_session" for this type.
[ Impact: make the code a bit more readable ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The blankline between each cpu's workqueue stat is not necessary, because
the cpu number is enough to part them by eye.
Old style also caused a blankline below headline, and made code complex
by using lock, disableirq and get cpu var.
Old style:
# CPU INSERTED EXECUTED NAME
# | | | |
0 8644 8644 events/0
0 0 0 cpuset
...
0 1 1 kdmflush
1 35365 35365 events/1
...
New style:
# CPU INSERTED EXECUTED NAME
# | | | |
0 8644 8644 events/0
0 0 0 cpuset
...
0 1 1 kdmflush
1 35365 35365 events/1
...
[ Impact: provide more readable code ]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
v3: zhaolei@cn.fujitsu.com: Change TRACE_EVENT definition to new format
introduced by Steven Rostedt: consolidate trace and trace_event headers
v2: kosaki@jp.fujitsu.com: print the function names instead of addr, and zap
the work addr
v1: zhaolei@cn.fujitsu.com: Make workqueue tracepoints use TRACE_EVENT macro
TRACE_EVENT is a more generic way to define tracepoints.
Doing so adds these new capabilities to the tracepoints:
- zero-copy and per-cpu splice() tracing
- binary tracing without printf overhead
- structured logging records exposed under /debug/tracing/events
- trace events embedded in function tracer output and other plugins
- user-defined, per tracepoint filter expressions
Then, this patch converts DEFINE_TRACE to TRACE_EVENT in workqueue related
tracepoints.
[ Impact: expand workqueue tracer to events tracing ]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Currently, LG R510 is only able to produce sound on headphones, the
internal speakers are not working.
The user tested and confirmed that with model=Dell headphones,
internal speakers and the microphone are working flawlessly.
Tested-by: Serdar Soytetir <tulliana@gmail.com>
Signed-off-by: Ozan Çağlayan <ozan@pardus.org.tr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
this is a patch against current snapshot that adds:
6 channels support for the MB5 model
Signed-off-by: Kacper Szczesniak <kacper@qwe.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In addition to the operating mode check, also check the
codec's interface format in case of four channel mode.
If the codec is not in TDM (DSP_A) mode, return with error.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Merge reason: arch/x86/kernel/irqinit_{32,64}.c unified in irq/numa
and modified in x86/mce3; this merge resolves the conflict.
Conflicts:
arch/x86/kernel/irqinit.c
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
J. Bruce Fields wrote:
...
> (This is extremely confusing code to track down: note that
> proc->pc_decode is set to nfs4svc_decode_compoundargs() by the PROC()
> macro at the end of fs/nfsd/nfs4proc.c. Which means, for example, that
> grepping for nfs4svc_decode_compoundargs() gets you nowhere. Patches to
> kill off that macro would be welcomed....)
the macro 'PROC' is complicated and obscure, it had better
be killed off in order to make the code more clear.
Signed-off-by: Yu Zhiguo <yuzg@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Server should return NFS4ERR_ATTRNOTSUPP if an attribute specified is
not supported in current environment.
Operations CREATE, NVERIFY, OPEN, SETATTR and VERIFY should do this check.
This bug is found when do newpynfs tests. The names of the tests that failed
are following:
CR12 NVF7a NVF7b NVF7c NVF7d NVF7f NVF7r NVF7s
OPEN15 VF7a VF7b VF7c VF7d VF7f VF7r VF7s
Add function do_check_fattr() to do exact check:
1, Check attribute specified is supported by the NFSv4 server or not.
2, Check FATTR4_WORD0_ACL & FATTR4_WORD0_FS_LOCATIONS are supported
in current environment or not.
3, Check attribute specified is writable or not.
step 1 and 3 are done in function nfsd4_decode_fattr() but removed
to this function now.
Signed-off-by: Yu Zhiguo <yuzg@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Merge reason: irq/numa didnt build because this commit:
2759c32: x86: don't call read_apic_id if !cpu_has_apic
Had a dependency on x86/cpufeature changes. Pull in that
(small) branch to fix the dependency.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
arch/mips/sibyte/bcm1480/irq.c
arch/mips/sibyte/sb1250/irq.c
Merge reason: we gathered a few conflicts plus update to latest upstream fixes.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It's possible to recurse into filesystem from the memory
allocation, which deadlocks in xfs_qm_shake(). Add check
for __GFP_FS, and bail out if it is not set.
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Hedi Berriche <hedi@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Fix issues for 3 generations of HP workstations.
The modest modifications do the following:
1. Change the second MIC from device 3 to device 1
2. Init the "boost" values to "0" by default
From: John Brown <john.brown3@hp.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
