In order to support CEC the hsm clock needs to be enabled in
vc4_hdmi_bind(), not in vc4_hdmi_encoder_enable(). Otherwise you wouldn't
be able to support CEC when there is no hotplug detect signal, which is
required by some monitors that turn off the HPD when in standby, but keep
the CEC bus alive so they can be woken up.
The HDMI core also has to be enabled in vc4_hdmi_bind() for the same
reason.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170716104804.48308-3-hverkuil@xs4all.nl
We cannot reference priv->fbdev outside of the #ifdef:
drivers/net/virtio_net.c:1881:12: error: 'virtnet_restore_up' defined but not used [-Werror=unused-function]
static int virtnet_restore_up(struct virtio_device *vdev)
drivers/net/virtio_net.c:1859:13: error: 'virtnet_freeze_down' defined but not used [-Werror=unused-function]
static void virtnet_freeze_down(struct virtio_device *vdev)
As the #ifdef is a bit annoying here, this removes it entirely
and uses an IS_ENABLED() check in it place where needed.
Fixes: b4dd9f1ffaba ("drm/hisilicon: Remove custom FB helper deferred setup")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[danvet: One step further, also remove the IS_ENABLED checks, core
no-ops out the fb helper functions that the cma helpers use. Discussed
with Arnd on dri-devel.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725180555.3699056-1-arnd@arndb.de
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
FB helper code falls back to a 1024x768 mode if no outputs are connected
or don't report back any modes upon initialization. This can be annoying
because outputs that are added to FB helper later on can't be used with
FB helper if they don't support a matching mode.
The fallback is in place because VGA connectors can happen to report an
unknown connection status even when they are in fact connected.
Some drivers have custom solutions in place to defer FB helper setup
until at least one output is connected. But the logic behind these
solutions is always the same and there is nothing driver-specific about
it, so a better alterative is to fix the FB helper core and add support
for all drivers automatically.
This patch adds support for deferred FB helper setup. It checks all the
connectors for their connection status, and if all of them report to be
disconnected marks the FB helper as needing deferred setup. Whet setup
is deferred, the FB helper core will automatically retry setup after a
hotplug event, and it will keep trying until it succeeds.
v2: Rebase onto my entirely reworked fbdev helper locking. One big
difference is that this version again drops&reacquires the fbdev lock
(which is now fb_helper->lock, but before this patch series it was
mode_config->mutex), because register_framebuffer must be able to
recurse back into fbdev helper code for the initial screen setup.
v3: __drm_fb_helper_initial_config must hold fb_helper->lock upon
return, I've fumbled that in the deferred setup case (Liviu).
v4: I was blind, redo this all. __drm_fb_helper_initial_config
shouldn't need to reacquire fb_helper->lock, that just confuses
callers. I myself got confused by kernel_fb_helper_lock and somehow
thought it's the same as fb_helper->lock. Tsk.
Also simplify the logic a bit (we don't need two functions to probe
connectors), we can stick much closer to the existing code. And update
some comments I've spotted that are outdated.
v5: Don't pass -EAGAIN to drivers, it's just an internal error code
(Liviu).
v6: Add _and_unlock suffix to clarify locking (Maarten)
Cc: Liviu Dudau <liviu@dudau.co.uk>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com> (v1)
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Reviewed-by: Liviu Dudau <liviu@dudau.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170706130023.28417-3-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I need this to be able to apply the deferred fbdev setup patches, I
need the relevant prep work that landed through the drm-intel tree.
Also squash in conflict fixup from Laurent Pinchart.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
- FBINFO_CAN_FORCE_OUTPUT has been a lie ever since we nerfed&removed
the entire panic handling code in our fbdev emulation. We might
restore kms panic output, but not through the bazillion of legacy
code layers called fbdev/fbcon, there's just no way to make that
work safely.
- With the module check change FBINFO_DEFAULT is always 0, so can be
removed too.
That removes another change to cargo-cult stuff in kms drivers, yay!
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170706125735.28299-5-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2nd round of 4.14 features:
- prep for deferred fbdev setup
- refactor fixed 16.16 computations and skl+ wm code (Mahesh Kumar)
- more cnl paches (Rodrigo, Imre et al)
- tighten context cleanup and handling (Chris Wilson)
- fix interlaced handling on skl+ (Mahesh Kumar)
- small bits as usual
* tag 'drm-intel-next-2017-07-17' of git://anongit.freedesktop.org/git/drm-intel: (84 commits)
drm/i915: Update DRIVER_DATE to 20170717
drm/i915: Protect against deferred fbdev setup
drm/i915/fbdev: Always forward hotplug events
drm/i915/skl+: unify cpp value in WM calculation
drm/i915/skl+: WM calculation don't require height
drm/i915: Addition wrapper for fixed16.16 operation
drm/i915: cleanup fixed-point wrappers naming
drm/i915: Always perform internal fixed16 division in 64 bits
drm/i915: take-out common clamping code of fixed16 wrappers
drm/i915/cnl: Add missing type case.
drm/i915/cnl: Add max allowed Cannonlake DC.
drm/i915: Make DP-MST connector info work
drm/i915/cnl: Get DDI clock based on PLLs.
drm/i915/cnl: Inherit RPS stuff from previous platforms.
drm/i915/cnl: Gen10 render context size.
drm/i915/cnl: Don't trust VBT's alternate pin for port D for now.
drm/i915: Fix the kernel panic when using aliasing ppgtt
drm/i915/cnl: Cannonlake color init.
drm/i915/cnl: Add force wake for gen10+.
x86/gpu: CNL uses the same GMS values as SKL
...
For modern drivers the DRM core doesn't use struct_mutex at all, which
means it's defacto a driver-private lock. But since we still need it
for legacy drivers we can't initialize it in drivers, which means all
the different instances share one lockdep key. Despite that they might
be placed in totally different places in the locking hierarchy.
This results in a lot of bogus lockdep splats when running stuff on
systems with multiple gpus. Partially remedy the situation by only
doing might_lock checks on drivers that do use struct_mutex still for
gem locking.
A more complete solution would be to do the mutex_init in the drm core
only for legacy drivers, plus add it to each modern driver that still
needs it, which would also give each its own lockdep key. Trying to do
that dynamically doesn't work, because lockdep requires it's keys to
be statically allocated.
v2: {} everywhere (Chris)
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170715095328.25671-1-daniel.vetter@ffwll.ch
Commit e8fa567118 ("drm: crc: Wait for a frame before returning
from open()") adds a wait for CRC frame, but with the CRTC off
this will never be generated. For atomic drivers we know if a CRTC
is active through crtc_state->active, so when inactive reject the
open with -EIO.
Just like with the previous patch changing debugfs opening semantics,
this patch has been tested against igt.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: e8fa567118 ("drm: crc: Wait for a frame before returning from open()")
Testcase: debugfs_test.read_all_entries
Link: http://patchwork.freedesktop.org/patch/msgid/15f9d300-65d3-63aa-00e3-e83f5e4d5a7a@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When I was doing a grep . -r /sys/kernel/debug/dri/0 I noticed a WARN
appearing when I aborted the grep with ^C.
After investigating I've also noticed that the error handling was
lacking and there are race conditions involving multiple calls to
open/close simultaneously.
Fix this by setting the opened flag first and using crc->entries to
decide when crc can be collected.
Also call unset crc source before cleaning up, this way there is
no race with a future open().
This patch has been tested with all the tests in igt with CRC in their
name.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621110007.11674-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
[mlankhorst: Add description that this patch has been tested with IGT,
based on tomeu's feedback]
Pull more __copy_.._user elimination from Al Viro.
* 'work.__copy_to_user' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
drm_dp_aux_dev: switch to read_iter/write_iter
This patch adds helper functions for YCBCR 420 handling.
These functions do:
- check if a given video mode is YCBCR 420 only mode.
- check if a given video mode is YCBCR 420 also mode.
V2: Added YCBCR functions as helpers in DRM layer, instead of
keeping it in I915 layer.
V3: Added handling for YCBCR-420 only modes too.
V4: EXPORT_SYMBOL(drm_find_hdmi_output_type)
V5: Addressed review comments from Danvet:
- %s/drm_find_hdmi_output_type/drm_display_info_hdmi_output_type
- %s/drm_can_support_ycbcr_output/drm_display_supports_ycbcr_output
- %s/drm_can_support_this_ycbcr_output/
drm_display_supports_this_ycbcr_output
- pass drm_display_info instead of drm_connector for consistency
- For drm_get_highest_quality_ycbcr_supported doc, move the variable
description above, and then the function description.
V6: Add only YCBCR420 helpers (Ville)
V7: Addressed review comments from Ville
- Remove cea_vic_valid() check.
- Fix indentation.
- Make input parameters to helpers, const.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-9-git-send-email-shashank.sharma@intel.com
[vsyrjala: Fix sparse indentation warn]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
