Add basic support of BPF token to BPF_PROG_LOAD. Wire through a set of
allowed BPF program types and attach types, derived from BPF FS at BPF
token creation time. Then make sure we perform bpf_token_capable()
checks everywhere where it's relevant.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow providing token_fd for BPF_MAP_CREATE command to allow controlled
BPF map creation from unprivileged process through delegated BPF token.
Wire through a set of allowed BPF map types to BPF token, derived from
BPF FS at BPF token creation time. This, in combination with allowed_cmds
allows to create a narrowly-focused BPF token (controlled by privileged
agent) with a restrictive set of BPF maps that application can attempt
to create.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Enhance partial_stack_load_preserves_zeros subtest with detailed
precision propagation log checks. We know expect fp-16 to be spilled,
initially imprecise, zero const register, which is later marked as
precise even when partial stack slot load is performed, even if it's not
a register fill (!).
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231205184248.1502704-10-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Validate that 1-, 2-, and 4-byte loads from stack slots not aligned on
8-byte boundary still preserve zero, when loading from all-STACK_ZERO
sub-slots, or when stack sub-slots are covered by spilled register with
known constant zero value.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231205184248.1502704-8-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new selftests that validates precision tracking for stack access
instruction, using both r10-based and non-r10-based accesses. For
non-r10 ones we also make sure to have non-zero var_off to validate that
final stack offset is tracked properly in instruction history
information inside verifier.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231205184248.1502704-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use instruction (jump) history to record instructions that performed
register spill/fill to/from stack, regardless if this was done through
read-only r10 register, or any other register after copying r10 into it
*and* potentially adjusting offset.
To make this work reliably, we push extra per-instruction flags into
instruction history, encoding stack slot index (spi) and stack frame
number in extra 10 bit flags we take away from prev_idx in instruction
history. We don't touch idx field for maximum performance, as it's
checked most frequently during backtracking.
This change removes basically the last remaining practical limitation of
precision backtracking logic in BPF verifier. It fixes known
deficiencies, but also opens up new opportunities to reduce number of
verified states, explored in the subsequent patches.
There are only three differences in selftests' BPF object files
according to veristat, all in the positive direction (less states).
File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF)
-------------------------------------- ------------- --------- --------- ------------- ---------- ---------- -------------
test_cls_redirect_dynptr.bpf.linked3.o cls_redirect 2987 2864 -123 (-4.12%) 240 231 -9 (-3.75%)
xdp_synproxy_kern.bpf.linked3.o syncookie_tc 82848 82661 -187 (-0.23%) 5107 5073 -34 (-0.67%)
xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 85116 84964 -152 (-0.18%) 5162 5130 -32 (-0.62%)
Note, I avoided renaming jmp_history to more generic insn_hist to
minimize number of lines changed and potential merge conflicts between
bpf and bpf-next trees.
Notice also cur_hist_entry pointer reset to NULL at the beginning of
instruction verification loop. This pointer avoids the problem of
relying on last jump history entry's insn_idx to determine whether we
already have entry for current instruction or not. It can happen that we
added jump history entry because current instruction is_jmp_point(), but
also we need to add instruction flags for stack access. In this case, we
don't want to entries, so we need to reuse last added entry, if it is
present.
Relying on insn_idx comparison has the same ambiguity problem as the one
that was fixed recently in [0], so we avoid that.
[0] https://patchwork.kernel.org/project/netdevbpf/patch/20231110002638.4168352-3-andrii@kernel.org/
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Reported-by: Tao Lyu <tao.lyu@epfl.ch>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231205184248.1502704-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
xdp_metadata test is flaky sometimes:
verify_xsk_metadata:FAIL:rx_hash_type unexpected rx_hash_type: actual 8 != expected 0
Where 8 means XDP_RSS_TYPE_L4_ANY and is exported from veth driver only when
'skb->l4_hash' condition is met. This makes me think that the program is
triggering again for some other packet.
Let's have a filter, similar to xdp_hw_metadata, where we trigger XDP kfuncs
only for UDP packets destined to port 8080.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231204174423.3460052-1-sdf@google.com
There was some confusion amongst Meta sched_ext folks regarding whether
stashing bpf_rb_root - the tree itself, rather than a single node - was
supported. This patch adds a small test which demonstrates this
functionality: a local kptr with rb_root is created, a node is created
and added to the tree, then the tree is kptr_xchg'd into a mapval.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20231204211722.571346-1-davemarchevsky@fb.com
Syscall program is running with rcu_read_lock_trace being held, so if
bpf_map_update_elem() or bpf_map_delete_elem() invokes
synchronize_rcu_tasks_trace() when operating on an outer map, there will
be dead-lock, so add a test to guarantee that it is dead-lock free.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231204140425.1480317-8-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add test cases to test the race between the destroy of inner map due to
map-in-map update and the access of inner map in bpf program. The
following 4 combinations are added:
(1) array map in map array + bpf program
(2) array map in map array + sleepable bpf program
(3) array map in map htab + bpf program
(4) array map in map htab + sleepable bpf program
Before applying the fixes, when running `./test_prog -a map_in_map`, the
following error was reported:
==================================================================
BUG: KASAN: slab-use-after-free in array_map_update_elem+0x48/0x3e0
Read of size 4 at addr ffff888114f33824 by task test_progs/1858
CPU: 1 PID: 1858 Comm: test_progs Tainted: G O 6.6.0+ #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ......
Call Trace:
<TASK>
dump_stack_lvl+0x4a/0x90
print_report+0xd2/0x620
kasan_report+0xd1/0x110
__asan_load4+0x81/0xa0
array_map_update_elem+0x48/0x3e0
bpf_prog_be94a9f26772f5b7_access_map_in_array+0xe6/0xf6
trace_call_bpf+0x1aa/0x580
kprobe_perf_func+0xdd/0x430
kprobe_dispatcher+0xa0/0xb0
kprobe_ftrace_handler+0x18b/0x2e0
0xffffffffc02280f7
RIP: 0010:__x64_sys_getpgid+0x1/0x30
......
</TASK>
Allocated by task 1857:
kasan_save_stack+0x26/0x50
kasan_set_track+0x25/0x40
kasan_save_alloc_info+0x1e/0x30
__kasan_kmalloc+0x98/0xa0
__kmalloc_node+0x6a/0x150
__bpf_map_area_alloc+0x141/0x170
bpf_map_area_alloc+0x10/0x20
array_map_alloc+0x11f/0x310
map_create+0x28a/0xb40
__sys_bpf+0x753/0x37c0
__x64_sys_bpf+0x44/0x60
do_syscall_64+0x36/0xb0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Freed by task 11:
kasan_save_stack+0x26/0x50
kasan_set_track+0x25/0x40
kasan_save_free_info+0x2b/0x50
__kasan_slab_free+0x113/0x190
slab_free_freelist_hook+0xd7/0x1e0
__kmem_cache_free+0x170/0x260
kfree+0x9b/0x160
kvfree+0x2d/0x40
bpf_map_area_free+0xe/0x20
array_map_free+0x120/0x2c0
bpf_map_free_deferred+0xd7/0x1e0
process_one_work+0x462/0x990
worker_thread+0x370/0x670
kthread+0x1b0/0x200
ret_from_fork+0x3a/0x70
ret_from_fork_asm+0x1b/0x30
Last potentially related work creation:
kasan_save_stack+0x26/0x50
__kasan_record_aux_stack+0x94/0xb0
kasan_record_aux_stack_noalloc+0xb/0x20
__queue_work+0x331/0x950
queue_work_on+0x75/0x80
bpf_map_put+0xfa/0x160
bpf_map_fd_put_ptr+0xe/0x20
bpf_fd_array_map_update_elem+0x174/0x1b0
bpf_map_update_value+0x2b7/0x4a0
__sys_bpf+0x2551/0x37c0
__x64_sys_bpf+0x44/0x60
do_syscall_64+0x36/0xb0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231204140425.1480317-7-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Emit tnum representation as just a constant if all bits are known.
Use decimal-vs-hex logic to determine exact format of emitted
constant value, just like it's done for register range values.
For that move tnum_strn() to kernel/bpf/log.c to reuse decimal-vs-hex
determination logic and constants.
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231202175705.885270-12-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF verifier expects callback subprogs to return values from specified
range (typically [0, 1]). This requires that r0 at exit is both precise
(because we rely on specific value range) and is marked as read
(otherwise state comparison will ignore such register as unimportant).
Add a simple test that validates that all these conditions are enforced.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231202175705.885270-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This selftests shows a proof of concept method to use BPF LSM to enforce
file signature. This test is added to verify_pkcs7_sig, so that some
existing logic can be reused.
This file signature method uses fsverity, which provides reliable and
efficient hash (known as digest) of the file. The file digest is signed
with asymmetic key, and the signature is stored in xattr. At the run time,
BPF LSM reads file digest and the signature, and then checks them against
the public key.
Note that this solution does NOT require FS_VERITY_BUILTIN_SIGNATURES.
fsverity is only used to provide file digest. The signature verification
and access control is all implemented in BPF LSM.
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231129234417.856536-7-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add selftests for two new filesystem kfuncs:
1. bpf_get_file_xattr
2. bpf_get_fsverity_digest
These tests simply make sure the two kfuncs work. Another selftest will be
added to demonstrate how to use these kfuncs to verify file signature.
CONFIG_FS_VERITY is added to selftests config. However, this is not
sufficient to guarantee bpf_get_fsverity_digest works. This is because
fsverity need to be enabled at file system level (for example, with tune2fs
on ext4). If local file system doesn't have this feature enabled, just skip
the test.
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231129234417.856536-6-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-11-30
We've added 30 non-merge commits during the last 7 day(s) which contain
a total of 58 files changed, 1598 insertions(+), 154 deletions(-).
The main changes are:
1) Add initial TX metadata implementation for AF_XDP with support in mlx5
and stmmac drivers. Two types of offloads are supported right now, that
is, TX timestamp and TX checksum offload, from Stanislav Fomichev with
stmmac implementation from Song Yoong Siang.
2) Change BPF verifier logic to validate global subprograms lazily instead
of unconditionally before the main program, so they can be guarded using
BPF CO-RE techniques, from Andrii Nakryiko.
3) Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter, from Jiri Olsa.
4) Use pkg-config in BPF selftests to determine ld flags which is
in particular needed for linking statically, from Akihiko Odaki.
5) Fix a few BPF selftest failures to adapt to the upcoming LLVM18,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (30 commits)
bpf/tests: Remove duplicate JSGT tests
selftests/bpf: Add TX side to xdp_hw_metadata
selftests/bpf: Convert xdp_hw_metadata to XDP_USE_NEED_WAKEUP
selftests/bpf: Add TX side to xdp_metadata
selftests/bpf: Add csum helpers
selftests/xsk: Support tx_metadata_len
xsk: Add option to calculate TX checksum in SW
xsk: Validate xsk_tx_metadata flags
xsk: Document tx_metadata_len layout
net: stmmac: Add Tx HWTS support to XDP ZC
net/mlx5e: Implement AF_XDP TX timestamp and checksum offload
tools: ynl: Print xsk-features from the sample
xsk: Add TX timestamp and TX checksum offload support
xsk: Support tx_metadata_len
selftests/bpf: Use pkg-config for libelf
selftests/bpf: Override PKG_CONFIG for static builds
selftests/bpf: Choose pkg-config for the target
bpftool: Add support to display uprobe_multi links
selftests/bpf: Add link_info test for uprobe_multi link
selftests/bpf: Use bpf_link__destroy in fill_link_info tests
...
====================
Conflicts:
Documentation/netlink/specs/netdev.yaml:
839ff60df3 ("net: page_pool: add nlspec for basic access to page pools")
48eb03dd26 ("xsk: Add TX timestamp and TX checksum offload support")
https://lore.kernel.org/all/20231201094705.1ee3cab8@canb.auug.org.au/
While at it also regen, tree is dirty after:
48eb03dd26 ("xsk: Add TX timestamp and TX checksum offload support")
looks like code wasn't re-rendered after "render-max" was removed.
Link: https://lore.kernel.org/r/20231130145708.32573-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and wifi.
Current release - regressions:
- neighbour: fix __randomize_layout crash in struct neighbour
- r8169: fix deadlock on RTL8125 in jumbo mtu mode
Previous releases - regressions:
- wifi:
- mac80211: fix warning at station removal time
- cfg80211: fix CQM for non-range use
- tools: ynl-gen: fix unexpected response handling
- octeontx2-af: fix possible buffer overflow
- dpaa2: recycle the RX buffer only after all processing done
- rswitch: fix missing dev_kfree_skb_any() in error path
Previous releases - always broken:
- ipv4: fix uaf issue when receiving igmp query packet
- wifi: mac80211: fix debugfs deadlock at device removal time
- bpf:
- sockmap: af_unix stream sockets need to hold ref for pair sock
- netdevsim: don't accept device bound programs
- selftests: fix a char signedness issue
- dsa: mv88e6xxx: fix marvell 6350 probe crash
- octeontx2-pf: restore TC ingress police rules when interface is up
- wangxun: fix memory leak on msix entry
- ravb: keep reverse order of operations in ravb_remove()"
* tag 'net-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
net: ravb: Keep reverse order of operations in ravb_remove()
net: ravb: Stop DMA in case of failures on ravb_open()
net: ravb: Start TX queues after HW initialization succeeded
net: ravb: Make write access to CXR35 first before accessing other EMAC registers
net: ravb: Use pm_runtime_resume_and_get()
net: ravb: Check return value of reset_control_deassert()
net: libwx: fix memory leak on msix entry
ice: Fix VF Reset paths when interface in a failed over aggregate
bpf, sockmap: Add af_unix test with both sockets in map
bpf, sockmap: af_unix stream sockets need to hold ref for pair sock
tools: ynl-gen: always construct struct ynl_req_state
ethtool: don't propagate EOPNOTSUPP from dumps
ravb: Fix races between ravb_tx_timeout_work() and net related ops
r8169: prevent potential deadlock in rtl8169_close
r8169: fix deadlock on RTL8125 in jumbo mtu mode
neighbour: Fix __randomize_layout crash in struct neighbour
octeontx2-pf: Restore TC ingress police rules when interface is up
octeontx2-pf: Fix adding mbox work queue entry when num_vfs > 64
net: stmmac: xgmac: Disable FPE MMC interrupts
octeontx2-af: Fix possible buffer overflow
...
To avoid duplicated code in different MPTCP selftests, we can add
and use helpers defined in mptcp_lib.sh.
wait_local_port_listen() helper is defined in diag.sh, mptcp_connect.sh,
mptcp_join.sh and simult_flows.sh, export it into mptcp_lib.sh and
rename it with mptcp_lib_ prefix. Use this new helper in all these
scripts.
Note: We only have IPv4 connections in this helper, not looking at IPv6
(tcp6) but that's OK because we only have IPv4 connections here in diag.sh.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-15-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To avoid duplicated code in different MPTCP selftests, we can add
and use helpers defined in mptcp_lib.sh.
check_transfer() and print_file_err() helpers are defined both in
mptcp_connect.sh and mptcp_sockopt.sh, export them into mptcp_lib.sh
and rename them with mptcp_lib_ prefix. And use them in all scripts.
Note: In mptcp_sockopt.sh it is OK to drop 'ret=1' in check_transfer()
because it will be set in run_tests() anyway.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-14-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To avoid duplicated code in different MPTCP selftests, we can add
and use helpers defined in mptcp_lib.sh.
The helper get_counter() in mptcp_join.sh and get_mib_counter() in
mptcp_connect.sh have the same functionality, export get_counter() into
mptcp_lib.sh and rename it as mptcp_lib_get_counter(). Use this new
helper instead of get_counter() and get_mib_counter().
Use this helper in test_prio() in userspace_pm.sh too instead of
open-coding.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-11-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a new argument namespace to userspace_pm_add_addr() and
userspace_pm_add_sf() to make these two helper more versatile.
Add two more versatile helpers for userspace pm remove subflow or address:
userspace_pm_rm_addr() and userspace_pm_rm_sf(). The original test helpers
userspace_pm_rm_sf_addr_ns1() and userspace_pm_rm_sf_addr_ns2() can be
replaced by these new helpers.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-4-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a new helper chk_subflows_total(), in it use the newly
added counter mptcpi_subflows_total to get the "correct" amount of
subflows, including the initial one.
To be compatible with old 'ss' or kernel versions not supporting this
counter, get the total subflows by listing TCP connections that are
MPTCP subflows:
ss -ti state state established state syn-sent state syn-recv |
grep -c tcp-ulp-mptcp.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-3-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a new helper get_info_value(), using 'sed' command to
parse the value of the given item name in the line with the given keyword,
to make chk_mptcp_info() and pedit_action_pkts() more readable.
Also add another helper evts_get_info() to use get_info_value() to parse
the output of 'pm_nl_ctl events' command, to make all the userspace pm
selftests more readable, both in mptcp_join.sh and userspace_pm.sh.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-2-8d6b94150f6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2023-11-30
We've added 5 non-merge commits during the last 7 day(s) which contain
a total of 10 files changed, 66 insertions(+), 15 deletions(-).
The main changes are:
1) Fix AF_UNIX splat from use after free in BPF sockmap,
from John Fastabend.
2) Fix a syzkaller splat in netdevsim by properly handling offloaded
programs (and not device-bound ones), from Stanislav Fomichev.
3) Fix bpf_mem_cache_alloc_flags() to initialize the allocation hint,
from Hou Tao.
4) Fix netkit by rejecting IFLA_NETKIT_PEER_INFO in changelink,
from Daniel Borkmann.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Add af_unix test with both sockets in map
bpf, sockmap: af_unix stream sockets need to hold ref for pair sock
netkit: Reject IFLA_NETKIT_PEER_INFO in netkit_change_link
bpf: Add missed allocation hint for bpf_mem_cache_alloc_flags()
netdevsim: Don't accept device bound programs
====================
Link: https://lore.kernel.org/r/20231129234916.16128-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we get a packet on port 9091, we swap src/dst and send it out.
At this point we also request the timestamp and checksum offloads.
Checksum offload is verified by looking at the tcpdump on the other side.
The tool prints pseudo-header csum and the final one it expects.
The final checksum actually matches the incoming packets checksum
because we only flip the src/dst and don't change the payload.
Some other related changes:
- switched to zerocopy mode by default; new flag can be used to force
old behavior
- request fixed tx_metadata_len headroom
- some other small fixes (umem size, fill idx+i, etc)
mvbz3:~# ./xdp_hw_metadata eth3
...
xsk_ring_cons__peek: 1
0x19546f8: rx_desc[0]->addr=80100 addr=80100 comp_addr=80100
rx_hash: 0x80B7EA8B with RSS type:0x2A
rx_timestamp: 1697580171852147395 (sec:1697580171.8521)
HW RX-time: 1697580171852147395 (sec:1697580171.8521), delta to User RX-time sec:0.2797 (279673.082 usec)
XDP RX-time: 1697580172131699047 (sec:1697580172.1317), delta to User RX-time sec:0.0001 (121.430 usec)
0x19546f8: ping-pong with csum=3b8e (want d862) csum_start=54 csum_offset=6
0x19546f8: complete tx idx=0 addr=8
tx_timestamp: 1697580172056756493 (sec:1697580172.0568)
HW TX-complete-time: 1697580172056756493 (sec:1697580172.0568), delta to User TX-complete-time sec:0.0852 (85175.537 usec)
XDP RX-time: 1697580172131699047 (sec:1697580172.1317), delta to User TX-complete-time sec:0.0102 (10232.983 usec)
HW RX-time: 1697580171852147395 (sec:1697580171.8521), delta to HW TX-complete-time sec:0.2046 (204609.098 usec)
0x19546f8: complete rx idx=128 addr=80100
mvbz4:~# nc -Nu -q1 ${MVBZ3_LINK_LOCAL_IP}%eth3 9091
mvbz4:~# tcpdump -vvx -i eth3 udp
tcpdump: listening on eth3, link-type EN10MB (Ethernet), snapshot length 262144 bytes
12:26:09.301074 IP6 (flowlabel 0x35fa5, hlim 127, next-header UDP (17) payload length: 11) fe80::1270:fdff:fe48:1087.55807 > fe80::1270:fdff:fe48:1077.9091: [bad udp cksum 0x3b8e -> 0xde7e!] UDP, length 3
0x0000: 6003 5fa5 000b 117f fe80 0000 0000 0000
0x0010: 1270 fdff fe48 1087 fe80 0000 0000 0000
0x0020: 1270 fdff fe48 1077 d9ff 2383 000b 3b8e
0x0030: 7864 70
12:26:09.301976 IP6 (flowlabel 0x35fa5, hlim 127, next-header UDP (17) payload length: 11) fe80::1270:fdff:fe48:1077.9091 > fe80::1270:fdff:fe48:1087.55807: [udp sum ok] UDP, length 3
0x0000: 6003 5fa5 000b 117f fe80 0000 0000 0000
0x0010: 1270 fdff fe48 1077 fe80 0000 0000 0000
0x0020: 1270 fdff fe48 1087 2383 d9ff 000b de7e
0x0030: 7864 70
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20231127190319.1190813-14-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This is the recommended way to run AF_XDP, so let's use it in the test.
Also, some unrelated changes to now blow up the log too much:
- change default mode to zerocopy and add -c to use copy mode
- small fixes for the flags/sizes/prints
- add print_tstamp_delta to print timestamp + reference
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20231127190319.1190813-13-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
