Kalle Valo says:
====================
wireless-next patches for v6.11
Most likely the last "new features" pull request for v6.11 with
changes both in stack and in drivers. The big thing is the multiple
radios for wiphy feature which makes it possible to better advertise
radio capabilities to user space. mt76 enabled MLO and iwlwifi
re-enabled MLO, ath12k and rtw89 Wi-Fi 6 devices got WoWLAN support.
Major changes:
cfg80211/mac80211
* remove DEAUTH_NEED_MGD_TX_PREP flag
* multiple radios per wiphy support
mac80211_hwsim
* multi-radio wiphy support
ath12k
* DebugFS support for datapath statistics
* WCN7850: support for WoW (Wake on WLAN)
* WCN7850: device-tree bindings
ath11k
* QCA6390: device-tree bindings
iwlwifi
* mvm: re-enable Multi-Link Operation (MLO)
* aggregation (A-MSDU) optimisations
rtw89
* preparation for RTL8852BE-VT support
* WoWLAN support for WiFi 6 chips
* 36-bit PCI DMA support
mt76
* mt7925 Multi-Link Operation (MLO) support
* tag 'wireless-next-2024-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (204 commits)
wifi: mac80211: fix AP chandef capturing in CSA
wifi: iwlwifi: correctly reference TSO page information
wifi: mt76: mt792x: fix scheduler interference in drv own process
wifi: mt76: mt7925: enabling MLO when the firmware supports it
wifi: mt76: mt7925: remove the unused mt7925_mcu_set_chan_info
wifi: mt76: mt7925: update mt7925_mac_link_bss_add for MLO
wifi: mt76: mt7925: update mt7925_mcu_bss_basic_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_set_timing for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_phy_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_rate_ctrl_tlv for MLO
wifi: mt76: mt7925: add mt7925_mcu_sta_eht_mld_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_update for MLO
wifi: mt76: mt7925: update mt7925_mcu_add_bss_info for MLO
wifi: mt76: mt7925: update mt7925_mcu_bss_mld_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_mld_tlv for MLO
wifi: mt76: mt7925: add mt7925_[assign,unassign]_vif_chanctx
wifi: mt76: add def_wcid to struct mt76_wcid
wifi: mt76: mt7925: report link information in rx status
wifi: mt76: mt7925: update rate index according to link id
wifi: mt76: mt7925: add link handling in the mt7925_ipv6_addr_change
...
====================
Link: https://patch.msgid.link/20240711102353.0C849C116B1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-07-08
The following pull-request contains BPF updates for your *net-next* tree.
We've added 102 non-merge commits during the last 28 day(s) which contain
a total of 127 files changed, 4606 insertions(+), 980 deletions(-).
The main changes are:
1) Support resilient split BTF which cuts down on duplication and makes BTF
as compact as possible wrt BTF from modules, from Alan Maguire & Eduard Zingerman.
2) Add support for dumping kfunc prototypes from BTF which enables both detecting
as well as dumping compilable prototypes for kfuncs, from Daniel Xu.
3) Batch of s390x BPF JIT improvements to add support for BPF arena and to implement
support for BPF exceptions, from Ilya Leoshkevich.
4) Batch of riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter, from Pu Lehui.
5) Extend BPF test infrastructure to add a CHECKSUM_COMPLETE validation option
for skbs and add coverage along with it, from Vadim Fedorenko.
6) Inline bpf_get_current_task/_btf() helpers in the arm64 BPF JIT which gives
a small 1% performance improvement in micro-benchmarks, from Puranjay Mohan.
7) Extend the BPF verifier to track the delta between linked registers in order
to better deal with recent LLVM code optimizations, from Alexei Starovoitov.
8) Fix bpf_wq_set_callback_impl() kfunc signature where the third argument should
have been a pointer to the map value, from Benjamin Tissoires.
9) Extend BPF selftests to add regular expression support for test output matching
and adjust some of the selftest when compiled under gcc, from Cupertino Miranda.
10) Simplify task_file_seq_get_next() and remove an unnecessary loop which always
iterates exactly once anyway, from Dan Carpenter.
11) Add the capability to offload the netfilter flowtable in XDP layer through
kfuncs, from Florian Westphal & Lorenzo Bianconi.
12) Various cleanups in networking helpers in BPF selftests to shave off a few
lines of open-coded functions on client/server handling, from Geliang Tang.
13) Properly propagate prog->aux->tail_call_reachable out of BPF verifier, so
that x86 JIT does not need to implement detection, from Leon Hwang.
14) Fix BPF verifier to add a missing check_func_arg_reg_off() to prevent an
out-of-bounds memory access for dynpointers, from Matt Bobrowski.
15) Fix bpf_session_cookie() kfunc to return __u64 instead of long pointer as
it might lead to problems on 32-bit archs, from Jiri Olsa.
16) Enhance traffic validation and dynamic batch size support in xsk selftests,
from Tushar Vyavahare.
bpf-next-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (102 commits)
selftests/bpf: DENYLIST.aarch64: Remove fexit_sleep
selftests/bpf: amend for wrong bpf_wq_set_callback_impl signature
bpf: helpers: fix bpf_wq_set_callback_impl signature
libbpf: Add NULL checks to bpf_object__{prev_map,next_map}
selftests/bpf: Remove exceptions tests from DENYLIST.s390x
s390/bpf: Implement exceptions
s390/bpf: Change seen_reg to a mask
bpf: Remove unnecessary loop in task_file_seq_get_next()
riscv, bpf: Optimize stack usage of trampoline
bpf, devmap: Add .map_alloc_check
selftests/bpf: Remove arena tests from DENYLIST.s390x
selftests/bpf: Add UAF tests for arena atomics
selftests/bpf: Introduce __arena_global
s390/bpf: Support arena atomics
s390/bpf: Enable arena
s390/bpf: Support address space cast instruction
s390/bpf: Support BPF_PROBE_MEM32
s390/bpf: Land on the next JITed instruction after exception
s390/bpf: Introduce pre- and post- probe functions
s390/bpf: Get rid of get_probe_mem_regno()
...
====================
Link: https://patch.msgid.link/20240708221438.10974-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The prerequisite for MLO support in cfg80211/mac80211 is that all the links
participating in MLO must be from the same wiphy/ieee80211_hw. To meet this
expectation, some drivers may need to group multiple discrete hardware each
acting as a link in MLO under single wiphy.
With this change, supported frequencies and interface combinations of each
individual radio are reported to user space. This allows user space to figure
out the limitations of what combination of channels can be used concurrently.
Even for non-MLO devices, this improves support for devices capable of
running on multiple channels at the same time.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/18a88f9ce82b1c9f7c12f1672430eaf2bb0be295.1720514221.git-series.nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Although not explicitly documented in the psample module itself, the
definition of PSAMPLE_ATTR_SAMPLE_RATE seems inherited from act_sample.
Quoting tc-sample(8):
"RATE of 100 will lead to an average of one sampled packet out of every
100 observed."
With this semantics, the rates that we can express with an unsigned
32-bits number are very unevenly distributed and concentrated towards
"sampling few packets".
For example, we can express a probability of 2.32E-8% but we
cannot express anything between 100% and 50%.
For sampling applications that are capable of sampling a decent
amount of packets, this sampling rate semantics is not very useful.
Add a new flag to the uAPI that indicates that the sampling rate is
expressed in scaled probability, this is:
- 0 is 0% probability, no packets get sampled.
- U32_MAX is 100% probability, all packets get sampled.
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240704085710.353845-5-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next:
Patch #1 to #11 to shrink memory consumption for transaction objects:
struct nft_trans_chain { /* size: 120 (-32), cachelines: 2, members: 10 */
struct nft_trans_elem { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_flowtable { /* size: 80 (-48), cachelines: 2, members: 5 */
struct nft_trans_obj { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_rule { /* size: 80 (-32), cachelines: 2, members: 6 */
struct nft_trans_set { /* size: 96 (-24), cachelines: 2, members: 8 */
struct nft_trans_table { /* size: 56 (-40), cachelines: 1, members: 2 */
struct nft_trans_elem can now be allocated from kmalloc-96 instead of
kmalloc-128 slab.
Series from Florian Westphal. For the record, I have mangled patch #1
to add nft_trans_container_*() and use if for every transaction object.
I have also added BUILD_BUG_ON to ensure struct nft_trans always comes
at the beginning of the container transaction object. And few minor
cleanups, any new bugs are of my own.
Patch #12 simplify check for SCTP GSO in IPVS, from Ismael Luceno.
Patch #13 nf_conncount key length remains in the u32 bound, from Yunjian Wang.
Patch #14 removes unnecessary check for CTA_TIMEOUT_L3PROTO when setting
default conntrack timeouts via nfnetlink_cttimeout API, from
Lin Ma.
Patch #15 updates NFT_SECMARK_CTX_MAXLEN to 4096, SELinux could use
larger secctx names than the existing 256 bytes length.
Patch #16 adds a selftest to exercise nfnetlink_queue listeners leaving
nfnetlink_queue, from Florian Westphal.
Patch #17 increases hitcount from 255 to 65535 in xt_recent, from Phil Sutter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a protocol spec for tcp_metrics, so that it's accessible via YNL.
Useful at the very least for testing fixes.
In this episode of "10,000 ways to complicate netlink" the metric
nest has defines which are off by 1. iproute2 does:
struct rtattr *m[TCP_METRIC_MAX + 1 + 1];
parse_rtattr_nested(m, TCP_METRIC_MAX + 1, a);
for (i = 0; i < TCP_METRIC_MAX + 1; i++) {
// ...
attr = m[i + 1];
This is too weird to support in YNL, add a new set of defines
with _correct_ values to the official kernel header.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_metrics' header lacks the customary _UAPI in the header guard.
This makes YNL build rules work less seamlessly.
We can easily fix that on YNL side, but this could also be
problematic if we ever needed to create a kernel-only tcp_metrics.h.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CMIS compliant modules such as QSFP-DD might be running a firmware that
can be updated in a vendor-neutral way by exchanging messages between
the host and the module as described in section 7.3.1 of revision 5.2 of
the CMIS standard.
Add a pair of new ethtool messages that allow:
* User space to trigger firmware update of transceiver modules
* The kernel to notify user space about the progress of the process
The user interface is designed to be asynchronous in order to avoid
RTNL being held for too long and to allow several modules to be
updated simultaneously. The interface is designed with CMIS compliant
modules in mind, but kept generic enough to accommodate future use
cases, if these arise.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The NetDIM library, currently leveraged by an array of NICs, delivers
excellent acceleration benefits. Nevertheless, NICs vary significantly
in their dim profile list prerequisites.
Specifically, virtio-net backends may present diverse sw or hw device
implementation, making a one-size-fits-all parameter list impractical.
On Alibaba Cloud, the virtio DPU's performance under the default DIM
profile falls short of expectations, partly due to a mismatch in
parameter configuration.
I also noticed that ice/idpf/ena and other NICs have customized
profilelist or placed some restrictions on dim capabilities.
Motivated by this, I tried adding new params for "ethtool -C" that provides
a per-device control to modify and access a device's interrupt parameters.
Usage
========
The target NIC is named ethx.
Assume that ethx only declares support for rx profile setting
(with DIM_PROFILE_RX flag set in profile_flags) and supports modification
of usec and pkt fields.
1. Query the currently customized list of the device
$ ethtool -c ethx
...
rx-profile:
{.usec = 1, .pkts = 256, .comps = n/a,},
{.usec = 8, .pkts = 256, .comps = n/a,},
{.usec = 64, .pkts = 256, .comps = n/a,},
{.usec = 128, .pkts = 256, .comps = n/a,},
{.usec = 256, .pkts = 256, .comps = n/a,}
tx-profile: n/a
2. Tune
$ ethtool -C ethx rx-profile 1,1,n_2,n,n_3,3,n_4,4,n_n,5,n
"n" means do not modify this field.
$ ethtool -c ethx
...
rx-profile:
{.usec = 1, .pkts = 1, .comps = n/a,},
{.usec = 2, .pkts = 256, .comps = n/a,},
{.usec = 3, .pkts = 3, .comps = n/a,},
{.usec = 4, .pkts = 4, .comps = n/a,},
{.usec = 256, .pkts = 5, .comps = n/a,}
tx-profile: n/a
3. Hint
If the device does not support some type of customized dim profiles,
the corresponding "n/a" will display.
If the "n/a" field is being modified, -EOPNOTSUPP will be reported.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240621101353.107425-4-hengqi@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch allows to create smc socket via AF_INET,
similar to the following code,
/* create v4 smc sock */
v4 = socket(AF_INET, SOCK_STREAM, IPPROTO_SMC);
/* create v6 smc sock */
v6 = socket(AF_INET6, SOCK_STREAM, IPPROTO_SMC);
There are several reasons why we believe it is appropriate here:
1. For smc sockets, it actually use IPv4 (AF-INET) or IPv6 (AF-INET6)
address. There is no AF_SMC address at all.
2. Create smc socket in the AF_INET(6) path, which allows us to reuse
the infrastructure of AF_INET(6) path, such as common ebpf hooks.
Otherwise, smc have to implement it again in AF_SMC path.
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Tested-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull vfs fixes from Christian Brauner:
"Misc:
- Restore debugfs behavior of ignoring unknown mount options
- Fix kernel doc for netfs_wait_for_oustanding_io()
- Fix struct statx comment after new addition for this cycle
- Fix a check in find_next_fd()
iomap:
- Fix data zeroing behavior when an extent spans the block that
contains i_size
- Restore i_size increasing in iomap_write_end() for now to avoid
stale data exposure on xfs with a realtime device
Cachefiles:
- Remove unneeded fdtable.h include
- Improve trace output for cachefiles_obj_{get,put}_ondemand_fd()
- Remove requests from the request list to prevent accessing already
freed requests
- Fix UAF when issuing restore command while the daemon is still
alive by adding an additional reference count to requests
- Fix UAF by grabbing a reference during xarray lookup with xa_lock()
held
- Simplify error handling in cachefiles_ondemand_daemon_read()
- Add consistency checks read and open requests to avoid crashes
- Add a spinlock to protect ondemand_id variable which is used to
determine whether an anonymous cachefiles fd has already been
closed
- Make on-demand reads killable allowing to handle broken cachefiles
daemon better
- Flush all requests after the kernel has been marked dead via
CACHEFILES_DEAD to avoid hung-tasks
- Ensure that closed requests are marked as such to avoid reusing
them with a reopen request
- Defer fd_install() until after copy_to_user() succeeded and thereby
get rid of having to use close_fd()
- Ensure that anonymous cachefiles on-demand fds are reused while
they are valid to avoid pinning already freed cookies"
* tag 'vfs-6.10-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: Fix iomap_adjust_read_range for plen calculation
iomap: keep on increasing i_size in iomap_write_end()
cachefiles: remove unneeded include of <linux/fdtable.h>
fs/file: fix the check in find_next_fd()
cachefiles: make on-demand read killable
cachefiles: flush all requests after setting CACHEFILES_DEAD
cachefiles: Set object to close if ondemand_id < 0 in copen
cachefiles: defer exposing anon_fd until after copy_to_user() succeeds
cachefiles: never get a new anonymous fd if ondemand_id is valid
cachefiles: add spin_lock for cachefiles_ondemand_info
cachefiles: add consistency check for copen/cread
cachefiles: remove err_put_fd label in cachefiles_ondemand_daemon_read()
cachefiles: fix slab-use-after-free in cachefiles_ondemand_daemon_read()
cachefiles: fix slab-use-after-free in cachefiles_ondemand_get_fd()
cachefiles: remove requests from xarray during flushing requests
cachefiles: add output string to cachefiles_obj_[get|put]_ondemand_fd
statx: Update offset commentary for struct statx
netfs: fix kernel doc for nets_wait_for_outstanding_io()
debugfs: continue to ignore unknown mount options
Pull HID fixes from Benjamin Tissoires:
- fix potential read out of bounds in hid-asus (Andrew Ballance)
- fix endian-conversion on little endian systems in intel-ish-hid (Arnd
Bergmann)
- A couple of new input event codes (Aseda Aboagye)
- errors handling fixes in hid-nvidia-shield (Chen Ni), hid-nintendo
(Christophe JAILLET), hid-logitech-dj (José Expósito)
- current leakage fix while the device is in suspend on a i2c-hid
laptop (Johan Hovold)
- other assorted smaller fixes and device ID / quirk entry additions
* tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: Ignore battery for ELAN touchscreens 2F2C and 4116
HID: i2c-hid: elan: fix reset suspend current leakage
dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property
dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M
dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema
input: Add support for "Do Not Disturb"
input: Add event code for accessibility key
hid: asus: asus_report_fixup: fix potential read out of bounds
HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macro
HID: intel-ish-hid: fix endian-conversion
HID: nintendo: Fix an error handling path in nintendo_hid_probe()
HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode()
HID: core: remove unnecessary WARN_ON() in implement()
HID: nvidia-shield: Add missing check for input_ff_create_memless
HID: intel-ish-hid: Fix build error for COMPILE_TEST
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/pensando/ionic/ionic_txrx.c
d9c0420999 ("ionic: Mark error paths in the data path as unlikely")
491aee894a ("ionic: fix kernel panic in XDP_TX action")
net/ipv6/ip6_fib.c
b4cb4a1391 ("net: use unrcu_pointer() helper")
b01e1c0307 ("ipv6: fix possible race in __fib6_drop_pcpu_from()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull tty fix from Greg KH:
"Here is a single revert for a much-reported regression in 6.10-rc1
when it comes to a few older architectures.
Turns out that the VT ioctls don't work the same across all cpu types
because of some old compatibility requrements for stuff like alpha and
powerpc. So revert the change that attempted to have them use the
_IO() macros and go back to the known-working values instead.
This has NOT been in linux-next but has had many reports that it fixes
the issue with 6.10-rc1"
* tag 'tty-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "VT: Use macros to define ioctls"
Recent commit 0cfe71f45f ("netdev: add queue stats") added
a lot of useful stats, but only those immediately needed by virtio.
Presumably virtio does not support CHECKSUM_COMPLETE,
so statistic for that form of checksumming wasn't included.
Other drivers will definitely need it, in fact we expect it
to be needed in net-next soon (mlx5). So let's add the definition
of the counter for CHECKSUM_COMPLETE to uAPI in net already,
so that the counters are in a more natural order (all subsequent
counters have not been present in any released kernel, yet).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Fixes: 0cfe71f45f ("netdev: add queue stats")
Link: https://lore.kernel.org/r/20240529163547.3693194-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-05-28
We've added 23 non-merge commits during the last 11 day(s) which contain
a total of 45 files changed, 696 insertions(+), 277 deletions(-).
The main changes are:
1) Rename skb's mono_delivery_time to tstamp_type for extensibility
and add SKB_CLOCK_TAI type support to bpf_skb_set_tstamp(),
from Abhishek Chauhan.
2) Add netfilter CT zone ID and direction to bpf_ct_opts so that arbitrary
CT zones can be used from XDP/tc BPF netfilter CT helper functions,
from Brad Cowie.
3) Several tweaks to the instruction-set.rst IETF doc to address
the Last Call review comments, from Dave Thaler.
4) Small batch of riscv64 BPF JIT optimizations in order to emit more
compressed instructions to the JITed image for better icache efficiency,
from Xiao Wang.
5) Sort bpftool C dump output from BTF, aiming to simplify vmlinux.h
diffing and forcing more natural type definitions ordering,
from Mykyta Yatsenko.
6) Use DEV_STATS_INC() macro in BPF redirect helpers to silence
a syzbot/KCSAN race report for the tx_errors counter,
from Jiang Yunshui.
7) Un-constify bpf_func_info in bpftool to fix compilation with LLVM 17+
which started treating const structs as constants and thus breaking
full BTF program name resolution, from Ivan Babrou.
8) Fix up BPF program numbers in test_sockmap selftest in order to reduce
some of the test-internal array sizes, from Geliang Tang.
9) Small cleanup in Makefile.btf script to use test-ge check for v1.25-only
pahole, from Alan Maguire.
10) Fix bpftool's make dependencies for vmlinux.h in order to avoid needless
rebuilds in some corner cases, from Artem Savkov.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (23 commits)
bpf, net: Use DEV_STAT_INC()
bpf, docs: Fix instruction.rst indentation
bpf, docs: Clarify call local offset
bpf, docs: Add table captions
bpf, docs: clarify sign extension of 64-bit use of 32-bit imm
bpf, docs: Use RFC 2119 language for ISA requirements
bpf, docs: Move sentence about returning R0 to abi.rst
bpf: constify member bpf_sysctl_kern:: Table
riscv, bpf: Try RVC for reg move within BPF_CMPXCHG JIT
riscv, bpf: Use STACK_ALIGN macro for size rounding up
riscv, bpf: Optimize zextw insn with Zba extension
selftests/bpf: Handle forwarding of UDP CLOCK_TAI packets
net: Add additional bit to support clockid_t timestamp type
net: Rename mono_delivery_time to tstamp_type for scalabilty
selftests/bpf: Update tests for new ct zone opts for nf_conntrack kfuncs
net: netfilter: Make ct zone opts configurable for bpf ct helpers
selftests/bpf: Fix prog numbers in test_sockmap
bpf: Remove unused variable "prev_state"
bpftool: Un-const bpf_func_info to fix it for llvm 17 and newer
bpf: Fix order of args in call to bpf_map_kvcalloc
...
====================
Link: https://lore.kernel.org/r/20240528105924.30905-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The implicit conversion from unsigned int to enum
proc_cn_event is invalid, so explicitly cast it
for compilation in a C++ compiler.
/usr/include/linux/cn_proc.h: In function 'proc_cn_event valid_event(proc_cn_event)':
/usr/include/linux/cn_proc.h:72:17: error: invalid conversion from 'unsigned int' to 'proc_cn_event' [-fpermissive]
72 | ev_type &= PROC_EVENT_ALL;
| ^
| |
| unsigned int
Signed-off-by: Matt Jan <zoo868e@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tstamp_type is now set based on actual clockid_t compressed
into 2 bits.
To make the design scalable for future needs this commit bring in
the change to extend the tstamp_type:1 to tstamp_type:2 to support
other clockid_t timestamp.
We now support CLOCK_TAI as part of tstamp_type as part of this
commit with existing support CLOCK_MONOTONIC and CLOCK_REALTIME.
Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240509211834.3235191-3-quic_abchauha@quicinc.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- virtio-net is finally supported in vduse
- virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster
And fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
virtio-pci: Check if is_avq is NULL
virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
MAINTAINERS: add Eugenio Pérez as reviewer
vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
vp_vdpa: don't allocate unused msix vectors
sound: virtio: drop owner assignment
fuse: virtio: drop owner assignment
scsi: virtio: drop owner assignment
rpmsg: virtio: drop owner assignment
nvdimm: virtio_pmem: drop owner assignment
wifi: mac80211_hwsim: drop owner assignment
vsock/virtio: drop owner assignment
net: 9p: virtio: drop owner assignment
net: virtio: drop owner assignment
net: caif: virtio: drop owner assignment
misc: nsm: drop owner assignment
iommu: virtio: drop owner assignment
drm/virtio: drop owner assignment
gpio: virtio: drop owner assignment
firmware: arm_scmi: virtio: drop owner assignment
...
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
Pull tty / serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.10-rc1.
Included in here are:
- Usual good set of api cleanups and evolution by Jiri Slaby to make
the serial interfaces move out of the 1990's by using kfifos
instead of hand-rolling their own logic.
- 8250_exar driver updates
- max3100 driver updates
- sc16is7xx driver updates
- exar driver updates
- sh-sci driver updates
- tty ldisc api addition to help refuse bindings
- other smaller serial driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (113 commits)
serial: Clear UPF_DEAD before calling tty_port_register_device_attr_serdev()
serial: imx: Raise TX trigger level to 8
serial: 8250_pnp: Simplify "line" related code
serial: sh-sci: simplify locking when re-issuing RXDMA fails
serial: sh-sci: let timeout timer only run when DMA is scheduled
serial: sh-sci: describe locking requirements for invalidating RXDMA
serial: sh-sci: protect invalidating RXDMA on shutdown
tty: add the option to have a tty reject a new ldisc
serial: core: Call device_set_awake_path() for console port
dt-bindings: serial: brcm,bcm2835-aux-uart: convert to dtschema
tty: serial: uartps: Add support for uartps controller reset
arm64: zynqmp: Add resets property for UART nodes
dt-bindings: serial: cdns,uart: Add optional reset property
serial: 8250_pnp: Switch to DEFINE_SIMPLE_DEV_PM_OPS()
serial: 8250_exar: Keep the includes sorted
serial: 8250_exar: Make type of bit the same in exar_ee_*_bit()
serial: 8250_exar: Use BIT() in exar_ee_read()
serial: 8250_exar: Switch to use dev_err_probe()
serial: 8250_exar: Return directly from switch-cases
serial: 8250_exar: Decrease indentation level
...
Pull RISC-V updates from Palmer Dabbelt:
- Add byte/half-word compare-and-exchange, emulated via LR/SC loops
- Support for Rust
- Support for Zihintpause in hwprobe
- Add PR_RISCV_SET_ICACHE_FLUSH_CTX prctl()
- Support lockless lockrefs
* tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
riscv: defconfig: Enable CONFIG_CLK_SOPHGO_CV1800
riscv: select ARCH_HAS_FAST_MULTIPLIER
riscv: mm: still create swiotlb buffer for kmalloc() bouncing if required
riscv: Annotate pgtable_l{4,5}_enabled with __ro_after_init
riscv: Remove redundant CONFIG_64BIT from pgtable_l{4,5}_enabled
riscv: mm: Always use an ASID to flush mm contexts
riscv: mm: Preserve global TLB entries when switching contexts
riscv: mm: Make asid_bits a local variable
riscv: mm: Use a fixed layout for the MM context ID
riscv: mm: Introduce cntx2asid/cntx2version helper macros
riscv: Avoid TLB flush loops when affected by SiFive CIP-1200
riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma
riscv: mm: Combine the SMP and UP TLB flush code
riscv: Only send remote fences when some other CPU is online
riscv: mm: Broadcast kernel TLB flushes only when needed
riscv: Use IPIs for remote cache/TLB flushes by default
riscv: Factor out page table TLB synchronization
riscv: Flush the instruction cache during SMP bringup
riscv: hwprobe: export Zihintpause ISA extension
riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code
...
With virtio-mem, primarily hibernation is problematic: as the machine shuts
down, the virtio-mem device loses its state. Powering the machine back up
is like losing a bunch of DIMMs. While there would be ways to add limited
support, suspend+resume is more commonly used for VMs and "easier" to
support cleanly.
s2idle can be supported without any device dependencies. Similarly, one
would expect suspend-to-ram (i.e., S3) to work out of the box. However,
QEMU currently unplugs all device memory when resuming the VM, using a
cold reset on the "wakeup" path. In order to support S3, we need a feature
flag for the device to tell us if memory remains plugged when waking up. In
the future, QEMU will implement this feature.
So let's always support s2idle and support S3 with plugged memory only if
the device indicates support. Block hibernation early using the PM
notifier.
Trying to hibernate now fails early:
# echo disk > /sys/power/state
[ 26.455369] PM: hibernation: hibernation entry
[ 26.458271] virtio_mem virtio0: hibernation is not supported.
[ 26.462498] PM: hibernation: hibernation exit
-bash: echo: write error: Operation not permitted
s2idle works even without the new feature bit:
# echo s2idle > /sys/power/mem_sleep
# echo mem > /sys/power/state
[ 52.083725] PM: suspend entry (s2idle)
[ 52.095950] Filesystems sync: 0.010 seconds
[ 52.101493] Freezing user space processes
[ 52.104213] Freezing user space processes completed (elapsed 0.001 seconds)
[ 52.106520] OOM killer disabled.
[ 52.107655] Freezing remaining freezable tasks
[ 52.110880] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 52.113296] printk: Suspending console(s) (use no_console_suspend to debug)
S3 does not work without the feature bit when memory is plugged:
# echo deep > /sys/power/mem_sleep
# echo mem > /sys/power/state
[ 32.788281] PM: suspend entry (deep)
[ 32.816630] Filesystems sync: 0.027 seconds
[ 32.820029] Freezing user space processes
[ 32.823870] Freezing user space processes completed (elapsed 0.001 seconds)
[ 32.827756] OOM killer disabled.
[ 32.829608] Freezing remaining freezable tasks
[ 32.833842] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 32.837953] printk: Suspending console(s) (use no_console_suspend to debug)
[ 32.916172] virtio_mem virtio0: suspend+resume with plugged memory is not supported
[ 32.916181] virtio-pci 0000:00:02.0: PM: pci_pm_suspend(): virtio_pci_freeze+0x0/0x50 returns -1
[ 32.916197] virtio-pci 0000:00:02.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x170 returns -1
[ 32.916210] virtio-pci 0000:00:02.0: PM: failed to suspend async: error -1
But S3 works with the new feature bit when memory is plugged (patched
QEMU):
# echo deep > /sys/power/mem_sleep
# echo mem > /sys/power/state
[ 33.983694] PM: suspend entry (deep)
[ 34.009828] Filesystems sync: 0.024 seconds
[ 34.013589] Freezing user space processes
[ 34.016722] Freezing user space processes completed (elapsed 0.001 seconds)
[ 34.019092] OOM killer disabled.
[ 34.020291] Freezing remaining freezable tasks
[ 34.023549] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 34.026090] printk: Suspending console(s) (use no_console_suspend to debug)
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20240318120645.105664-1-david@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
since there's no requirement to describe them in E820 and some
platforms require ECAM to work (Bjorn Helgaas)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
Le Moal)
- Remove last user and pci_enable_device_io() (Heiner Kallweit)
- Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)
- Skip waiting for devices that have been disconnected while
suspended (Ilpo Järvinen)
- Clear Secondary Status errors after enumeration since Master Aborts
and Unsupported Request errors are an expected part of enumeration
(Vidya Sagar)
MSI:
- Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)
Error handling:
- Mask Genesys GL975x SD host controller Replay Timer Timeout
correctable errors caused by a hardware defect; the errors cause
interrupts that prevent system suspend (Kai-Heng Feng)
- Fix EDR-related _DSM support, which previously evaluated revision 5
but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)
ASPM:
- Simplify link state definitions and mask calculation (Ilpo
Järvinen)
Power management:
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
apparently doesn't know how to put them back in D0 (Mario
Limonciello)
CXL:
- Support resetting CXL devices; special handling required because
CXL Ports mask Secondary Bus Reset by default (Dave Jiang)
DOE:
- Support DOE Discovery Version 2 (Alexey Kardashevskiy)
Endpoint framework:
- Set endpoint BAR to be 64-bit if the driver says that's all the
device supports, in addition to doing so if the size is >2GB
(Niklas Cassel)
- Simplify endpoint BAR allocation and setting interfaces (Niklas
Cassel)
Cadence PCIe controller driver:
- Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
Kozlowski)
Cadence PCIe endpoint driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
Freescale Layerscape PCIe controller driver:
- Convert DT binding to YAML (Frank Li)
MediaTek MT7621 PCIe controller driver:
- Add DT binding missing 'reg' property for child Root Ports
(Krzysztof Kozlowski)
- Fix theoretical string truncation in PHY name (Sergio Paracuellos)
NVIDIA Tegra194 PCIe controller driver:
- Return success for endpoint probe instead of falling through to the
failure path (Vidya Sagar)
Renesas R-Car PCIe controller driver:
- Add DT binding missing IOMMU properties (Geert Uytterhoeven)
- Add DT binding R-Car V4H compatible for host and endpoint mode
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
- Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)
- Set the Subsystem Vendor ID, which was previously zero because it
was masked incorrectly (Rick Wertenbroek)
Synopsys DesignWare PCIe controller driver:
- Restructure DBI register access to accommodate devices where this
requires Refclk to be active (Manivannan Sadhasivam)
- Remove the deinit() callback, which was only need by the
pcie-rcar-gen4, and do it directly in that driver (Manivannan
Sadhasivam)
- Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
up things like eDMA (Manivannan Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
to dw_pcie_ep_init() (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
reflect the actual functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from all the glue
drivers, not just those that require active Refclk from the host
(Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which was an obscure way for
glue drivers to indicate that they depend on Refclk from the host
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)
- Add DT binding J722S SoC support (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Add DT binding missing num-viewport, phys and phy-name properties
(Jan Kiszka)
Miscellaneous:
- Constify and annotate with __ro_after_init (Heiner Kallweit)
- Convert DT bindings to YAML (Krzysztof Kozlowski)
- Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
Zhou)"
* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
Revert "genirq/msi: Provide constants for PCI/IMS support"
Revert "x86/apic/msi: Enable PCI/IMS"
Revert "iommu/vt-d: Enable PCI/IMS"
Revert "iommu/amd: Enable PCI/IMS"
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
...
Pull bcachefs updates from Kent Overstreet:
- More safety fixes, primarily found by syzbot
- Run the upgrade/downgrade paths in nochnages mode. Nochanges mode is
primarily for testing fsck/recovery in dry run mode, so it shouldn't
change anything besides disabling writes and holding dirty metadata
in memory.
The idea here was to reduce the amount of activity if we can't write
anything out, so that bringing up a filesystem in "super ro" mode
would be more lilkely to work for data recovery - but norecovery is
the correct option for this.
- btree_trans->locked; we now track whether a btree_trans has any btree
nodes locked, and this is used for improved assertions related to
trans_unlock() and trans_relock(). We'll also be using it for
improving how we work with lockdep in the future: we don't want
lockdep to be tracking individual btree node locks because we take
too many for lockdep to track, and it's not necessary since we have a
cycle detector.
- Trigger improvements that are prep work for online fsck
- BTREE_TRIGGER_check_repair; this regularizes how we do some repair
work for extents that goes with running triggers in fsck, and fixes
some subtle issues with transaction restarts there.
- bch2_snapshot_equiv() has now been ripped out of fsck.c; snapshot
equivalence classes are for when snapshot deletion leaves behind
redundant snapshot nodes, but snapshot deletion now cleans this up
right away, so the abstraction doesn't need to leak.
- Improvements to how we resume writing to the journal in recovery. The
code for picking the new place to write when reading the journal is
greatly simplified and we also store the position in the superblock
for when we don't read the journal; this means that we preserve more
of the journal for list_journal debugging.
- Improvements to sysfs btree_cache and btree_node_cache, for debugging
memory reclaim.
- We now detect when we've blocked for 10 seconds on the allocator in
the write path and dump some useful info.
- Safety fixes for devices references: this is a big series that
changes almost all device lookups to properly check if the device
exists and take a reference to it.
Previously we assumed that if a bkey exists that references a device
then the device must exist, and this was enforced in .invalid
methods, but this was incorrect because it meant device removal
relied on accounting being correct to not leave keys pointing to
invalid devices, and that's not something we can assume.
Getting the "pointer to invalid device" checks out of our .invalid()
methods fixes some long standing device removal bugs; the only
outstanding bug with device removal now is a race between the discard
path and deleting alloc info, which should be easily fixed.
- The allocator now prefers not to expand the new
member_info.btree_allocated bitmap, meaning if repair ever requires
scanning for btree nodes (because of a corrupt interior nodes) we
won't have to scan the whole device(s).
- New coding style document, which among other things talks about the
correct usage of assertions
* tag 'bcachefs-2024-05-19' of https://evilpiepirate.org/git/bcachefs: (155 commits)
bcachefs: add no_invalid_checks flag
bcachefs: add counters for failed shrinker reclaim
bcachefs: Fix sb_field_downgrade validation
bcachefs: Plumb bch_validate_flags to sb_field_ops.validate()
bcachefs: s/bkey_invalid_flags/bch_validate_flags
bcachefs: fsync() should not return -EROFS
bcachefs: Invalid devices are now checked for by fsck, not .invalid methods
bcachefs: kill bch2_dev_bkey_exists() in bch2_check_fix_ptrs()
bcachefs: kill bch2_dev_bkey_exists() in bch2_read_endio()
bcachefs: bch2_dev_get_ioref() checks for device not present
bcachefs: bch2_dev_get_ioref2(); io_read.c
bcachefs: bch2_dev_get_ioref2(); debug.c
bcachefs: bch2_dev_get_ioref2(); journal_io.c
bcachefs: bch2_dev_get_ioref2(); io_write.c
bcachefs: bch2_dev_get_ioref2(); btree_io.c
bcachefs: bch2_dev_get_ioref2(); backpointers.c
bcachefs: bch2_dev_get_ioref2(); alloc_background.c
bcachefs: for_each_bset() declares loop iter
bcachefs: Move BCACHEFS_STATFS_MAGIC value to UAPI magic.h
bcachefs: Improve sysfs internal/btree_cache
...
Pull nfsd updates from Chuck Lever:
"This is a light release containing mostly optimizations, code clean-
ups, and minor bug fixes. This development cycle has focused on non-
upstream kernel work:
1. Continuing to build upstream CI for NFSD, based on kdevops
2. Backporting NFSD filecache-related fixes to selected LTS kernels
One notable new feature in v6.10 NFSD is the addition of a new netlink
protocol dedicated to configuring NFSD. A new user space tool,
nfsdctl, is to be added to nfs-utils. Lots more to come here.
As always I am very grateful to NFSD contributors, reviewers, testers,
and bug reporters who participated during this cycle"
* tag 'nfsd-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (29 commits)
NFSD: Force all NFSv4.2 COPY requests to be synchronous
SUNRPC: Fix gss_free_in_token_pages()
NFS/knfsd: Remove the invalid NFS error 'NFSERR_OPNOTSUPP'
knfsd: LOOKUP can return an illegal error value
nfsd: set security label during create operations
NFSD: Add COPY status code to OFFLOAD_STATUS response
NFSD: Record status of async copy operation in struct nfsd4_copy
SUNRPC: Remove comment for sp_lock
NFSD: add listener-{set,get} netlink command
SUNRPC: add a new svc_find_listener helper
SUNRPC: introduce svc_xprt_create_from_sa utility routine
NFSD: add write_version to netlink command
NFSD: convert write_threads to netlink command
NFSD: allow callers to pass in scope string to nfsd_svc
NFSD: move nfsd_mutex handling into nfsd_svc callers
lockd: host: Remove unnecessary statements＇host = NULL;＇
nfsd: don't create nfsv4recoverydir in nfsdfs when not used.
nfsd: optimise recalculate_deny_mode() for a common case
nfsd: add tracepoint in mark_client_expired_locked
nfsd: new tracepoint for check_slot_seqid
...
Pull landlock updates from Mickaël Salaün:
"This brings ioctl control to Landlock, contributed by Günther Noack.
This also adds him as a Landlock reviewer, and fixes an issue in the
sample"
* tag 'landlock-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
MAINTAINERS: Add Günther Noack as Landlock reviewer
fs/ioctl: Add a comment to keep the logic in sync with LSM policies
MAINTAINERS: Notify Landlock maintainers about changes to fs/ioctl.c
landlock: Document IOCTL support
samples/landlock: Add support for LANDLOCK_ACCESS_FS_IOCTL_DEV
selftests/landlock: Exhaustive test for the IOCTL allow-list
selftests/landlock: Check IOCTL restrictions for named UNIX domain sockets
selftests/landlock: Test IOCTLs on named pipes
selftests/landlock: Test ioctl(2) and ftruncate(2) with open(O_PATH)
selftests/landlock: Test IOCTL with memfds
selftests/landlock: Test IOCTL support
landlock: Add IOCTL access right for character and block devices
samples/landlock: Fix incorrect free in populate_ruleset_net
Pull tracing ring buffer updates from Steven Rostedt:
"Add ring_buffer memory mappings.
The tracing ring buffer was created based on being mostly used with
the splice system call. It is broken up into page ordered sub-buffers
and the reader swaps a new sub-buffer with an existing sub-buffer
that's part of the write buffer. It then has total access to the
swapped out sub-buffer and can do copyless movements of the memory
into other mediums (file system, network, etc).
The buffer is great for passing around the ring buffer contents in the
kernel, but is not so good for when the consumer is the user space
task itself.
A new interface is added that allows user space to memory map the ring
buffer. It will get all the write sub-buffers as well as reader
sub-buffer (that is not written to). It can send an ioctl to change
which sub-buffer is the new reader sub-buffer.
The ring buffer is read only to user space. It only needs to call the
ioctl when it is finished with a sub-buffer and needs a new sub-buffer
that the writer will not write over.
A self test program was also created for testing and can be used as an
example for the interface to user space. The libtracefs (external to
the kernel) also has code that interacts with this, although it is
disabled until the interface is in a official release. It can be
enabled by compiling the library with a special flag. This was used
for testing applications that perform better with the buffer being
mapped.
Memory mapped buffers have limitations. The main one is that it can
not be used with the snapshot logic. If the buffer is mapped,
snapshots will be disabled. If any logic is set to trigger snapshots
on a buffer, that buffer will not be allowed to be mapped"
* tag 'trace-ringbuffer-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Add cast to unsigned long addr passed to virt_to_page()
ring-buffer: Have mmapped ring buffer keep track of missed events
ring-buffer/selftest: Add ring-buffer mapping test
Documentation: tracing: Add ring-buffer mapping
tracing: Allow user-space mapping of the ring-buffer
ring-buffer: Introducing ring-buffer mapping functions
ring-buffer: Allocate sub-buffers with __GFP_COMP
Pull powerpc updates from Michael Ellerman:
- Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.
- Allow per-process DEXCR (Dynamic Execution Control Register) settings
via prctl, notably NPHIE which controls hashst/hashchk for ROP
protection.
- Install powerpc selftests in sub-directories. Note this changes the
way run_kselftest.sh needs to be invoked for powerpc selftests.
- Change fadump (Firmware Assisted Dump) to better handle memory
add/remove.
- Add support for passing additional parameters to the fadump kernel.
- Add support for updating the kdump image on CPU/memory add/remove
events.
- Other small features, cleanups and fixes.
Thanks to Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd
Bergmann, Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe
Jaillet, Christophe Leroy, Colin Ian King, Cédric Le Goater, Dr. David
Alan Gilbert, Erhard Furtner, Frank Li, GUO Zihua, Ganesh Goudar, Geoff
Levand, Ghanshyam Agrawal, Greg Kurz, Hari Bathini, Joel Stanley, Justin
Stitt, Kunwu Chan, Li Yang, Lidong Zhong, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Matthias Schiffer, Naresh Kamboju, Nathan
Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Miehlbradt, Ran Wang,
Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta, Shrikanth
Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav
Jain, Xiaowei Bao, Yang Li, and Zhao Chenhui.
* tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (85 commits)
powerpc/fadump: Fix section mismatch warning
powerpc/85xx: fix compile error without CONFIG_CRASH_DUMP
powerpc/fadump: update documentation about bootargs_append
powerpc/fadump: pass additional parameters when fadump is active
powerpc/fadump: setup additional parameters for dump capture kernel
powerpc/pseries/fadump: add support for multiple boot memory regions
selftests/powerpc/dexcr: Fix spelling mistake "predicition" -> "prediction"
KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info()
KVM: PPC: Fix documentation for ppc mmu caps
KVM: PPC: code cleanup for kvmppc_book3s_irqprio_deliver
KVM: PPC: Book3S HV nestedv2: Cancel pending DEC exception
powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#"
powerpc/code-patching: Use dedicated memory routines for patching
powerpc/code-patching: Test patch_instructions() during boot
powerpc64/kasan: Pass virtual addresses to kasan_init_phys_region()
powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX
powerpc: Fix typos
powerpc/eeh: Fix spelling of the word "auxillary" and update comment
macintosh/ams: Fix unused variable warning
powerpc/Makefile: Remove bits related to the previous use of -mcmodel=large
...
Pull media updates from Mauro Carvalho Chehab:
- New V4L2 ioctl VIDIOC_REMOVE_BUFS
- experimental support for using generic metaformats on V4L2 core
- New drivers: Intel IPU6 controller driver, Broadcom BCM283x/BCM271x
- More cleanups at atomisp driver
- Usual bunch of driver cleanups, improvements and fixes
* tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (328 commits)
media: bcm2835-unicam: Depend on COMMON_CLK
Revert "media: v4l2-ctrls: show all owned controls in log_status"
media: ov2740: Ensure proper reset sequence on probe()
media: intel/ipu6: Don't print user-triggerable errors to kernel log
media: bcm2835-unicam: Fix driver path in MAINTAINERS
media: bcm2835-unicam: Fix a NULL vs IS_ERR() check
media: bcm2835-unicam: Do not print error when irq not found
media: bcm2835-unicam: Do not replace IRQ retcode during probe
media: bcm2835-unicam: Convert to platform remove callback returning void
media: media: intel/ipu6: Fix spelling mistake "remappinp" -> "remapping"
media: intel/ipu6: explicitly include vmalloc.h
media: cec.h: Fix kerneldoc
media: uvcvideo: Refactor iterators
media: v4l: async: refactor v4l2_async_create_ancillary_links
media: intel/ipu6: Don't re-allocate memory for firmware
media: dvb-frontends: tda10048: Fix integer overflow
media: tc358746: Use the correct div_ function
media: i2c: st-mipid02: Use the correct div function
media: tegra-vde: Refactor timeout handling
media: stk1160: Use min macro
...
