Due to SNDRV_SEQ_ADDRESS_BROADCAST, not all 256 port number values can
be used.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the last subscriber to a "Through" port has been removed, the
subscribed destination ports might still be active, so it would be
wrong to send "all sounds off" and "reset controller" events to them.
The proper place for such a shutdown would be the closing of the actual
MIDI port (and close_substream() in rawmidi.c already can do this).
This also fixes a deadlock when dummy_unuse() tries to send events to
its own port that is already locked because it is being freed.
Reported-by: Peter Billam <peter@www.pjb.com.au>
Cc: <stable@vger.kernel.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Section mismatch in reference from the variable fsl_of_pamu_driver to the function .init.text:fsl_pamu_probe()
The variable fsl_of_pamu_driver references
the function __init fsl_pamu_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Acked-by: Varun Sethi <Varun.Sethi@freescale.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Replace the custom page table allocation implementation with the
standard allocator.
The driver loses the ability to map 64kB chunkgs using the PTE
contiguous hint, hence the removal of the SZ_64K page size from the
IOMMU page sizes bitmap.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The PM initialization needs internal SRAM for allocating a gen_pool and
use it to store its PM code. So we need to have of_platform_populate() before
this code.
Suggested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
As all sam9 SoCs are setting arm_pm_idle to at91sam9_idle(), do it from
sam9_dt_device_init().
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
[nicolas.ferre@atmel.com: adapt patch to newer series]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
As long as there is no other non-const variable marked __initdata in the
same compilation unit it doesn't hurt. If there were one however
compilation would fail with
error: $variablename causes a section type conflict
because a section containing const variables is marked read only and so
cannot contain non-const variables.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[nicolas.ferre@atmel.com: update the paths after having re-arranged the patches]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Newer SoCs: at91sam9x5, at91sam9n12, sama5d3 and sama5d4 embed a DDR controller
and have a different PMC status register layout than the at91sam9g45. Create
another at91_sam9x5_pm_init() function to match this compatibility.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
The DEBUG_AT91_UART Kconfig option was forgotten when moving the
AT91 debug-macro.S file. Add it and use it for the at91.S compilation.
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
var->yoffset is of the type __u32, hence the comparison will always
be false.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Commit 315786ebbf ("iommu: Add iommu_map_sg() function") adds a new
->map_sg() callback and provides a default implementation that drivers
can use until they implement a hardware-specific variant. Unfortunately
the Tegra GART driver was not updated as part of that commit, so that
iommu_map_sg() calls on a domain provided by the GART cause an oops.
Fixes: 315786ebbf ("iommu: Add iommu_map_sg() function")
Cc: Hiroshi Doyu <hdoyu@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The driver currently doesn't work as expected and causes existing setups
with Tegra20 to break after commit df06b759f2 ("drm/tegra: Add IOMMU
support"). To restore these setups, do not register the operations with
the platform bus for now. Fixing this properly will involve non-trivial
changes to the DRM driver, which are unlikely to be accepted at this
point in the release cycle.
Reported-by: Misha Komarovskiy <zombah@gmail.com>
Reported-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Misha Komarovskiy <zombah@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Cc: Hiroshi Doyu <hdoyu@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
ASoC: Fixes for v3.19
There's a lot more fixes here than I'd like since I've been lax in
sending things throughout the release cycle but there's only two in
generic code and they've had quite some time to cook in -next so
hopefully on balance are OK.
The two generic fixes are a fix for crashes on capture DAIs in the
compress code and a fix for error handling on probe failures which would
have been harmless in the past but now oopses with the new dynamic probe
code.
iommu_map() calls trace_map() with iova and size. trace_map()
should report original iova and original size as opposed to
iova and size after they get changed during mapping. size is
always zero at the end of mapping which is useless to report
and iova as it gets incremented, it is not as useful as the
original iova. Change iommu_map() to call trace_map() to
report original iova and original size.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The debug parameter is not used anymore, as this module was
converted already to use dev_dbg().
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add device tree support for MT8173 SoC and evaluation board based on it.
Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
Acked-by: Arnd Bergmann <arnd at arndb.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
MT8173 is a 64-bit four core Soc.
And mt8173-evb is a evaluation board based on mt8173.
This commit add the devicetree binding document for
mediatek MT8173 SoC
MT8173 sysirq
MT8173 uart
Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This patch implements an I2C bus sharing mechanism between the host and platform
hardware on select Intel BayTrail SoC platforms using the X-Powers AXP288 PMIC.
On these platforms access to the PMIC must be shared with platform hardware. The
hardware unit assumes full control of the I2C bus and the host must request
access through a special semaphore. Hardware control of the bus also makes it
necessary to disable runtime pm to avoid interfering with hardware transactions.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Adds support for acquiring and releasing a hardware bus lock in the i2c
designware core transfer function. This is needed for i2c bus controllers
that are shared with but not controlled by the kernel.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
On long-mode, when far call that changes cs.l takes place, the stack size is
determined by the new mode. For instance, if we go from 32-bit mode to 64-bit
mode, the stack-size if 64. KVM uses the old stack size.
Fix it.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we got a wraparound of 32-bit operand, and the limit is 0xffffffff, read and
writes should be successful. It just needs to be done in two segments.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unnecassary define was left after commit 7d882ffa81 ("KVM: x86: Revert
NoBigReal patch in the emulator").
Commit 39f062ff51 ("KVM: x86: Generate #UD when memory operand is required")
was missing undef.
Fix it.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ARPL and MOVSXD are encoded the same and their execution depends on the
execution mode. The operand sizes of each instruction are different.
Currently, ARPL is detected too late, after the decoding was already done, and
therefore may result in spurious exception (instead of failed emulation).
Introduce a group to the emulator to handle instructions according to execution
mode (32/64 bits). Note: in order not to make changes that may affect
performance, the new ModeDual can only be applied to instructions with ModRM.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The IRET instruction should clear NMI masking, but the current implementation
does not do so.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Indeed, Intel SDM specifically states that for the RET instruction "In 64-bit
mode, the default operation size of this instruction is the stack-address size,
i.e. 64 bits."
However, experiments show this is not the case. Here is for example objdump of
small 64-bit asm:
4004f1: ca 14 00 lret $0x14
4004f4: 48 cb lretq
4004f6: 48 ca 14 00 lretq $0x14
Therefore, remove the Stack flag from far-ret instructions.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel SDM says for CMPXCHG: "To simplify the interface to the processor’s bus,
the destination operand receives a write cycle without regard to the result of
the comparison.". This means the destination page should be dirtied.
Fix it to by writing back the original value if cmpxchg failed.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When an interrupt occurs __gic_irq_dispatch() continuously reads local
and shared pending registers until all is serviced before
returning. The problem with that is that it could introduce a long
delay before returning if a piece of hardware keeps triggering while
in one of these loops.
To ensure fairness and priority doesn't get skewed a lot, read local
and shared pending registers once to service each pending IRQ once.
If another interupt triggers while servicing the current ones, then we
shall re-enter the handler after we return.
Signed-off-by: Qais Yousef <qais.yousef@imgtec.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: <linux-mips@linux-mips.org>
Link: http://lkml.kernel.org/r/1421668289-828-1-git-send-email-qais.yousef@imgtec.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
