* for-next/mte:
docs: sysfs-devices-system-cpu: document "asymm" value for mte_tcf_preferred
arm64/mte: Remove asymmetric mode from the prctl() interface
kasan: fix a missing header include of static_keys.h
arm64/mte: Add userspace interface for enabling asymmetric mode
arm64/mte: Add hwcap for asymmetric mode
arm64/mte: Add a little bit of documentation for mte_update_sctlr_user()
arm64/mte: Document ABI for asymmetric mode
arm64: mte: avoid clearing PSTATE.TCO on entry unless necessary
kasan: split kasan_*enabled() functions into a separate header
* for-next/linkage:
arm64: module: remove (NOLOAD) from linker script
linkage: remove SYM_FUNC_{START,END}_ALIAS()
x86: clean up symbol aliasing
arm64: clean up symbol aliasing
linkage: add SYM_FUNC_ALIAS{,_LOCAL,_WEAK}()
As pointed out by Evgenii Stepanov one potential issue with the new ABI for
enabling asymmetric is that if there are multiple places where MTE is
configured in a process, some of which were compiled with the old prctl.h
and some of which were compiled with the new prctl.h, there may be problems
keeping track of which MTE modes are requested. For example some code may
disable only sync and async modes leaving asymmetric mode enabled when it
intended to fully disable MTE.
In order to avoid such mishaps remove asymmetric mode from the prctl(),
instead implicitly allowing it if both sync and async modes are requested.
This should not disrupt userspace since a process requesting both may
already see a mix of sync and async modes due to differing defaults between
CPUs or changes in default while the process is running but it does mean
that userspace is unable to explicitly request asymmetric mode without
changing the system default for CPUs.
Reported-by: Evgenii Stepanov <eugenis@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Branislav Rankov <branislav.rankov@arm.com>
Link: https://lore.kernel.org/r/20220309131200.112637-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Since commit 2369f171d5 ("arm64: crash_core: Export MODULES, VMALLOC,
and VMEMMAP ranges"), Stephen reports a warning when building htmldocs:
| Documentation/admin-guide/kdump/vmcoreinfo.rst:498: WARNING: Title underline too short.
Extend the underline to squash the warning.
Fixes: 2369f171d5 ("arm64: crash_core: Export MODULES, VMALLOC, and VMEMMAP ranges")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Will Deacon <will@kernel.org>
When a IAR register read races with a GIC interrupt RELEASE event,
GIC-CPU interface could wrongly return a valid INTID to the CPU
for an interrupt that is already released(non activated) instead of 0x3ff.
As a side effect, an interrupt handler could run twice, once with
interrupt priority and then with idle priority.
As a workaround, gic_read_iar is updated so that it will return a
valid interrupt ID only if there is a change in the active priority list
after the IAR read on all the affected Silicons.
Since there are silicon variants where both 23154 and 38545 are applicable,
workaround for erratum 23154 has been extended to address both of them.
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220307143014.22758-1-lcherian@marvell.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently aliasing an asm function requires adding START and END
annotations for each name, as per Documentation/asm-annotations.rst:
SYM_FUNC_START_ALIAS(__memset)
SYM_FUNC_START(memset)
... asm insns ...
SYM_FUNC_END(memset)
SYM_FUNC_END_ALIAS(__memset)
This is more painful than necessary to maintain, especially where a
function has many aliases, some of which we may wish to define
conditionally. For example, arm64's memcpy/memmove implementation (which
uses some arch-specific SYM_*() helpers) has:
SYM_FUNC_START_ALIAS(__memmove)
SYM_FUNC_START_ALIAS_WEAK_PI(memmove)
SYM_FUNC_START_ALIAS(__memcpy)
SYM_FUNC_START_WEAK_PI(memcpy)
... asm insns ...
SYM_FUNC_END_PI(memcpy)
EXPORT_SYMBOL(memcpy)
SYM_FUNC_END_ALIAS(__memcpy)
EXPORT_SYMBOL(__memcpy)
SYM_FUNC_END_ALIAS_PI(memmove)
EXPORT_SYMBOL(memmove)
SYM_FUNC_END_ALIAS(__memmove)
EXPORT_SYMBOL(__memmove)
SYM_FUNC_START(name)
It would be much nicer if we could define the aliases *after* the
standard function definition. This would avoid the need to specify each
symbol name twice, and would make it easier to spot the canonical
function definition.
This patch adds new macros to allow us to do so, which allows the above
example to be rewritten more succinctly as:
SYM_FUNC_START(__pi_memcpy)
... asm insns ...
SYM_FUNC_END(__pi_memcpy)
SYM_FUNC_ALIAS(__memcpy, __pi_memcpy)
EXPORT_SYMBOL(__memcpy)
SYM_FUNC_ALIAS_WEAK(memcpy, __memcpy)
EXPORT_SYMBOL(memcpy)
SYM_FUNC_ALIAS(__pi_memmove, __pi_memcpy)
SYM_FUNC_ALIAS(__memmove, __pi_memmove)
EXPORT_SYMBOL(__memmove)
SYM_FUNC_ALIAS_WEAK(memmove, __memmove)
EXPORT_SYMBOL(memmove)
The reduction in duplication will also make it possible to replace some
uses of WEAK with more accurate Kconfig guards, e.g.
#ifndef CONFIG_KASAN
SYM_FUNC_ALIAS(memmove, __memmove)
EXPORT_SYMBOL(memmove)
#endif
... which should make it easier to ensure that symbols are neither used
nor overidden unexpectedly.
The existing SYM_FUNC_START_ALIAS() and SYM_FUNC_START_LOCAL_ALIAS() are
marked as deprecated, and will be removed once existing users are moved
over to the new scheme.
The tools/perf/ copy of linkage.h is updated to match. A subsequent
patch will depend upon this when updating the x86 asm annotations.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220216162229.1076788-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
With the current wording readers might infer that PR_GET_TAGGED_ADDR_CTRL
will report the mode currently active in the thread however this is not the
actual behaviour, instead all modes currently selected by the process will
be reported with the mode used depending on the combination of the
requested modes and the default set for the current CPU. This has been the
case since 433c38f40f ("arm64: mte: change ASYNC and SYNC TCF settings
into bitfields"), before that we did not allow more than one mode to be
requested simultaneously.
Update the documentation to more clearly reflect current behaviour.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220127190324.660405-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Pull xen fixes from Juergen Gross:
- documentation fixes related to Xen
- enable x2apic mode when available when running as hardware
virtualized guest under Xen
- cleanup and fix a corner case of vcpu enumeration when running a
paravirtualized Xen guest
* tag 'for-linus-5.17a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/Xen: streamline (and fix) PV CPU enumeration
xen: update missing ioctl magic numers documentation
Improve docs for IOCTL_GNTDEV_MAP_GRANT_REF
xen: xenbus_dev.h: delete incorrect file name
xen/x2apic: enable x2apic mode when supported for HVM
Pull kvm fixes from Paolo Bonzini:
"ARM:
- A couple of fixes when handling an exception while a SError has
been delivered
- Workaround for Cortex-A510's single-step erratum
RISC-V:
- Make CY, TM, and IR counters accessible in VU mode
- Fix SBI implementation version
x86:
- Report deprecation of x87 features in supported CPUID
- Preparation for fixing an interrupt delivery race on AMD hardware
- Sparse fix
All except POWER and s390:
- Rework guest entry code to correctly mark noinstr areas and fix
vtime' accounting (for x86, this was already mostly correct but not
entirely; for ARM, MIPS and RISC-V it wasn't)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Use ERR_PTR_USR() to return -EFAULT as a __user pointer
KVM: x86: Report deprecated x87 features in supported CPUID
KVM: arm64: Workaround Cortex-A510's single-step and PAC trap errata
KVM: arm64: Stop handle_exit() from handling HVC twice when an SError occurs
KVM: arm64: Avoid consuming a stale esr value when SError occur
RISC-V: KVM: Fix SBI implementation version
RISC-V: KVM: make CY, TM, and IR counters accessible in VU mode
kvm/riscv: rework guest entry logic
kvm/arm64: rework guest entry logic
kvm/x86: rework guest entry logic
kvm/mips: rework guest entry logic
kvm: add guest_state_{enter,exit}_irqoff()
KVM: x86: Move delivery of non-APICv interrupt into vendor code
kvm: Move KVM_GET_XSAVE2 IOCTL definition at the end of kvm.h
Pull drm fixes from Dave Airlie:
"Regular fixes for the week. Daniel has agreed to bring back the fbcon
hw acceleration under a CONFIG option for the non-drm fbdev users, we
don't advise turning this on unless you are in the niche that is old
fbdev drivers, Since it's essentially a revert and shouldn't be high
impact seemed like a good time to do it now.
Otherwise, i915 and amdgpu fixes are most of it, along with some minor
fixes elsewhere.
fbdev:
- readd fbcon acceleration
i915:
- fix DP monitor via type-c dock
- fix for engine busyness and read timeout with GuC
- use ALLOW_FAIL for error capture buffer allocs
- don't use interruptible lock on error paths
- smatch fix to reject zero sized overlays.
amdgpu:
- mGPU fan boost fix for beige goby
- S0ix fixes
- Cyan skillfish hang fix
- DCN fixes for DCN 3.1
- DCN fixes for DCN 3.01
- Apple retina panel fix
- ttm logic inversion fix
dma-buf:
- heaps: fix potential spectre v1 gadget
kmb:
- fix potential oob access
mxsfb:
- fix NULL ptr deref
nouveau:
- fix potential oob access during BIOS decode"
* tag 'drm-fixes-2022-02-04' of git://anongit.freedesktop.org/drm/drm: (24 commits)
drm: mxsfb: Fix NULL pointer dereference
drm/amdgpu: fix logic inversion in check
drm/amd: avoid suspend on dGPUs w/ s2idle support when runtime PM enabled
drm/amd/display: Force link_rate as LINK_RATE_RBR2 for 2018 15" Apple Retina panels
drm/amd/display: revert "Reset fifo after enable otg"
drm/amd/display: watermark latencies is not enough on DCN31
drm/amd/display: Update watermark values for DCN301
drm/amdgpu: fix a potential GPU hang on cyan skillfish
drm/amd: Only run s3 or s0ix if system is configured properly
drm/amd: add support to check whether the system is set to s3
fbcon: Add option to enable legacy hardware acceleration
Revert "fbcon: Disable accelerated scrolling"
Revert "fbdev: Garbage collect fbdev scrolling acceleration, part 1 (from TODO list)"
drm/i915/pmu: Fix KMD and GuC race on accessing busyness
dma-buf: heaps: Fix potential spectre v1 gadget
drm/amd: Warn users about potential s0ix problems
drm/amd/pm: correct the MGpuFanBoost support for Beige Goby
drm/nouveau: fix off by one in BIOS boundary checking
drm/i915/adlp: Fix TypeC PHY-ready status readout
drm/i915/pmu: Use PM timestamp instead of RING TIMESTAMP for reference
...
Pull cifs fixes from Steve French:
"SMB3 client fixes including:
- multiple fscache related fixes, reenabling ability to read/write to
cached files for cifs.ko (that was temporarily disabled for cifs.ko
a few weeks ago due to the recent fscache changes)
- also includes a new fscache helper function ("query_occupancy")
used by above
- fix for multiuser mounts and NTLMSSP auth (workstation name) for
stable
- fix locking ordering problem in multichannel code
- trivial malformed comment fix"
* tag '5.17-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix workstation_name for multiuser mounts
Invalidate fscache cookie only when inode attributes are changed.
cifs: Fix the readahead conversion to manage the batch when reading from cache
cifs: Implement cache I/O by accessing the cache directly
netfs, cachefiles: Add a method to query presence of data in the cache
cifs: Transition from ->readpages() to ->readahead()
cifs: unlock chan_lock before calling cifs_put_tcp_session
Fix a warning about a malformed kernel doc comment in cifs
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, netfilter, and ieee802154.
Current release - regressions:
- Partially revert "net/smc: Add netlink net namespace support", fix
uABI breakage
- netfilter:
- nft_ct: fix use after free when attaching zone template
- nft_byteorder: track register operations
Previous releases - regressions:
- ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback
- phy: qca8081: fix speeds lower than 2.5Gb/s
- sched: fix use-after-free in tc_new_tfilter()
Previous releases - always broken:
- tcp: fix mem under-charging with zerocopy sendmsg()
- tcp: add missing tcp_skb_can_collapse() test in
tcp_shift_skb_data()
- neigh: do not trigger immediate probes on NUD_FAILED from
neigh_managed_work, avoid a deadlock
- bpf: use VM_MAP instead of VM_ALLOC for ringbuf, avoid KASAN
false-positives
- netfilter: nft_reject_bridge: fix for missing reply from prerouting
- smc: forward wakeup to smc socket waitqueue after fallback
- ieee802154:
- return meaningful error codes from the netlink helpers
- mcr20a: fix lifs/sifs periods
- at86rf230, ca8210: stop leaking skbs on error paths
- macsec: add missing un-offload call for NETDEV_UNREGISTER of parent
- ax25: add refcount in ax25_dev to avoid UAF bugs
- eth: mlx5e:
- fix SFP module EEPROM query
- fix broken SKB allocation in HW-GRO
- IPsec offload: fix tunnel mode crypto for non-TCP/UDP flows
- eth: amd-xgbe:
- fix skb data length underflow
- ensure reset of the tx_timer_active flag, avoid Tx timeouts
- eth: stmmac: fix runtime pm use in stmmac_dvr_remove()
- eth: e1000e: handshake with CSME starts from Alder Lake platforms"
* tag 'net-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
ax25: fix reference count leaks of ax25_dev
net: stmmac: ensure PTP time register reads are consistent
net: ipa: request IPA register values be retained
dt-bindings: net: qcom,ipa: add optional qcom,qmp property
tools/resolve_btfids: Do not print any commands when building silently
bpf: Use VM_MAP instead of VM_ALLOC for ringbuf
net, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work
tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data()
net: sparx5: do not refer to skb after passing it on
Partially revert "net/smc: Add netlink net namespace support"
net/mlx5e: Avoid field-overflowing memcpy()
net/mlx5e: Use struct_group() for memcpy() region
net/mlx5e: Avoid implicit modify hdr for decap drop rule
net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP traffic
net/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated traffic
net/mlx5e: Don't treat small ceil values as unlimited in HTB offload
net/mlx5: E-Switch, Fix uninitialized variable modact
net/mlx5e: Fix handling of wrong devices during bond netevent
net/mlx5e: Fix broken SKB allocation in HW-GRO
net/mlx5e: Fix wrong calculation of header index in HW_GRO
...
Pull Kselftest fixes from Shuah Khan:
"Important fixes to several tests and documentation clarification on
running mainline kselftest on stable releases. A few notable fixes:
- fix kselftest run hang due to child processes that haven't been
terminated. Fix signals all child processes
- fix false pass/fail results from vdso_test_abi, openat2, mincore
- build failures when using -j (multiple jobs) option
- exec test build failure due to incorrect build rule for a run-time
created "pipe"
- zram test fixes related to interaction with zram-generator to make
sure zram test to coordinate deleted with zram-generator
- zram test compression ratio calculation fix and skipping
max_comp_streams.
- increasing rtc test timeout
- cpufreq test to write test results to stdout which will necessary
on automated test systems"
* tag 'linux-kselftest-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftest: Fix vdso_test_abi return status
selftests: skip mincore.check_file_mmap when fs lacks needed support
selftests: openat2: Skip testcases that fail with EOPNOTSUPP
selftests: openat2: Add missing dependency in Makefile
selftests: openat2: Print also errno in failure messages
selftests: futex: Use variable MAKE instead of make
selftests/exec: Remove pipe from TEST_GEN_FILES
selftests/zram: Adapt the situation that /dev/zram0 is being used
selftests/zram01.sh: Fix compression ratio calculation
selftests/zram: Skip max_comp_streams interface on newer kernel
docs/kselftest: clarify running mainline tests on stables
kselftest: signal all child processes
selftests: cpufreq: Write test output to stdout as well
selftests: rtc: Increase test timeout so that all tests run
For some systems, the IPA driver must make a request to ensure that
its registers are retained across power collapse of the IPA hardware.
On such systems, we'll use the existence of the "qcom,qmp" property
as a signal that this request is required.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cortex-A510's erratum #2077057 causes SPSR_EL2 to be corrupted when
single-stepping authenticated ERET instructions. A single step is
expected, but a pointer authentication trap is taken instead. The
erratum causes SPSR_EL1 to be copied to SPSR_EL2, which could allow
EL1 to cause a return to EL2 with a guest controlled ELR_EL2.
Because the conditions require an ERET into active-not-pending state,
this is only a problem for the EL2 when EL2 is stepping EL1. In this case
the previous SPSR_EL2 value is preserved in struct kvm_vcpu, and can be
restored.
Cc: stable@vger.kernel.org # 53960faf2b: arm64: Add Cortex-A510 CPU part definition
Cc: stable@vger.kernel.org
Signed-off-by: James Morse <james.morse@arm.com>
[maz: fixup cpucaps ordering]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220127122052.1584324-5-james.morse@arm.com
This reverts commit 39aead8373.
Revert the first (of 2) commits which disabled scrolling acceleration in
fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards
because of the performance penalty by doing screen scrolling by software
instead of using the existing graphic card 2D hardware acceleration.
Console scrolling acceleration was disabled by dropping code which
checked at runtime the driver hardware capabilities for the
BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it
enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move
screen contents. After dropping those checks scrollmode was hard-wired
to SCROLL_REDRAW instead, which forces all graphic cards to redraw every
character at the new screen position when scrolling.
This change effectively disabled all hardware-based scrolling acceleration for
ALL drivers, because now all kind of 2D hardware acceleration (bitblt,
fillrect) in the drivers isn't used any longer.
The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm
and gma500) used hardware acceleration in the past and thus code for checking
and using scrolling acceleration is obsolete.
This statement is NOT TRUE, because beside the DRM drivers there are around 35
other fbdev drivers which depend on fbdev/fbcon and still provide hardware
acceleration for fbdev/fbcon.
The original commit message also states that syzbot found lots of bugs in fbcon
and thus it's "often the solution to just delete code and remove features".
This is true, and the bugs - which actually affected all users of fbcon,
including DRM - were fixed, or code was dropped like e.g. the support for
software scrollback in vgacon (commit 973c096f6a).
So to further analyze which bugs were found by syzbot, I've looked through all
patches in drivers/video which were tagged with syzbot or syzkaller back to
year 2005. The vast majority fixed the reported issues on a higher level, e.g.
when screen is to be resized, or when font size is to be changed. The few ones
which touched driver code fixed a real driver bug, e.g. by adding a check.
But NONE of those patches touched code of either the SCROLL_MOVE or the
SCROLL_REDRAW case.
That means, there was no real reason why SCROLL_MOVE had to be ripped-out and
just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far
was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it
could go away. That argument completely missed the fact that SCROLL_MOVE is
still heavily used by fbdev (non-DRM) drivers.
Some people mention that using memcpy() instead of the hardware acceleration is
pretty much the same speed. But that's not true, at least not for older graphic
cards and machines where we see speed decreases by factor 10 and more and thus
this change leads to console responsiveness way worse than before.
That's why the original commit is to be reverted. By reverting we
reintroduce hardware-based scrolling acceleration and fix the
performance regression for fbdev drivers.
There isn't any impact on DRM when reverting those patches.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-3-deller@gmx.de
This reverts commit b3ec8cdf45.
Revert the second (of 2) commits which disabled scrolling acceleration
in fbcon/fbdev. It introduced a regression for fbdev-supported graphic
cards because of the performance penalty by doing screen scrolling by
software instead of using the existing graphic card 2D hardware
acceleration.
Console scrolling acceleration was disabled by dropping code which
checked at runtime the driver hardware capabilities for the
BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it
enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move
screen contents. After dropping those checks scrollmode was hard-wired
to SCROLL_REDRAW instead, which forces all graphic cards to redraw every
character at the new screen position when scrolling.
This change effectively disabled all hardware-based scrolling acceleration for
ALL drivers, because now all kind of 2D hardware acceleration (bitblt,
fillrect) in the drivers isn't used any longer.
The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm
and gma500) used hardware acceleration in the past and thus code for checking
and using scrolling acceleration is obsolete.
This statement is NOT TRUE, because beside the DRM drivers there are around 35
other fbdev drivers which depend on fbdev/fbcon and still provide hardware
acceleration for fbdev/fbcon.
The original commit message also states that syzbot found lots of bugs in fbcon
and thus it's "often the solution to just delete code and remove features".
This is true, and the bugs - which actually affected all users of fbcon,
including DRM - were fixed, or code was dropped like e.g. the support for
software scrollback in vgacon (commit 973c096f6a).
So to further analyze which bugs were found by syzbot, I've looked through all
patches in drivers/video which were tagged with syzbot or syzkaller back to
year 2005. The vast majority fixed the reported issues on a higher level, e.g.
when screen is to be resized, or when font size is to be changed. The few ones
which touched driver code fixed a real driver bug, e.g. by adding a check.
But NONE of those patches touched code of either the SCROLL_MOVE or the
SCROLL_REDRAW case.
That means, there was no real reason why SCROLL_MOVE had to be ripped-out and
just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far
was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it
could go away. That argument completely missed the fact that SCROLL_MOVE is
still heavily used by fbdev (non-DRM) drivers.
Some people mention that using memcpy() instead of the hardware acceleration is
pretty much the same speed. But that's not true, at least not for older graphic
cards and machines where we see speed decreases by factor 10 and more and thus
this change leads to console responsiveness way worse than before.
That's why the original commit is to be reverted. By reverting we
reintroduce hardware-based scrolling acceleration and fix the
performance regression for fbdev drivers.
There isn't any impact on DRM when reverting those patches.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-2-deller@gmx.de
Pull spi fixes from Mark Brown:
"There are quite a few fixes that have accumilated since the merge
window here, all driver specific and none super urgent, plus a new
device ID for the Rockchip driver"
* tag 'spi-fix-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: mediatek: Avoid NULL pointer crash in interrupt
spi: dt-bindings: Fix 'reg' child node schema
spi: bcm-qspi: check for valid cs before applying chip select
spi: uniphier: fix reference count leak in uniphier_spi_probe()
spi: meson-spicc: add IRQ check in meson_spicc_probe
spi: uniphier: Fix a bug that doesn't point to private data correctly
spi: change clk_disable_unprepare to clk_unprepare
spi: spi-rockchip: Add rk3568-spi compatible
spi: stm32: make SPI_MASTER_MUST_TX flags only specific to STM32F4
spi: stm32: remove inexistant variables in struct stm32_spi_cfg comment
spi: stm32-qspi: Update spi registering
Pull irq fixes from Borislav Petkov:
- Drop an unused private data field in the AIC driver
- Various fixes to the realtek-rtl driver
- Make the GICv3 ITS driver compile again in !SMP configurations
- Force reset of the GICv3 ITSs at probe time to avoid issues during kexec
- Yet another kfree/bitmap_free conversion
- Various DT updates (Renesas, SiFive)
* tag 'irq_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
dt-bindings: interrupt-controller: sifive,plic: Group interrupt tuples
dt-bindings: interrupt-controller: sifive,plic: Fix number of interrupts
dt-bindings: irqchip: renesas-irqc: Add R-Car V3U support
irqchip/gic-v3-its: Reset each ITS's BASERn register before probe
irqchip/gic-v3-its: Fix build for !SMP
irqchip/loongson-pch-ms: Use bitmap_free() to free bitmap
irqchip/realtek-rtl: Service all pending interrupts
irqchip/realtek-rtl: Fix off-by-one in routing
irqchip/realtek-rtl: Map control data to virq
irqchip/apple-aic: Drop unused ipi_hwirq field
Pull irqchip fixes from Marc Zyngier:
- Drop an unused private data field in the AIC driver
- Various fixes to the realtek-rtl driver
- Make the GICv3 ITS driver compile again in !SMP configurations
- Force reset of the GICv3 ITSs at probe time to avoid issues during kexec
- Yet another kfree/bitmap_free conversion
- Various DT updates (Renesas, SiFive)
Link: https://lore.kernel.org/r/20220128174217.517041-1-maz@kernel.org
Pull gpio fixes from Bartosz Golaszewski:
"Two fixes for the gpio-simulator:
- fix a bug with hogs not being set-up in gpio-sim when user-space
sets the chip label to an empty string
- include the gpio-sim documentation in the index"
* tag 'gpio-fixes-for-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: sim: add doc file to index file
gpio: sim: check the label length when setting up device properties
Pull arm64 fixes from Catalin Marinas:
- Errata workarounds for Cortex-A510: broken hardware dirty bit
management, detection code for the TRBE (tracing) bugs with the
actual fixes going in via the CoreSight tree.
- Cortex-X2 errata handling for TRBE (inheriting the workarounds from
Cortex-A710).
- Fix ex_handler_load_unaligned_zeropad() to use the correct struct
members.
- A couple of kselftest fixes for FPSIMD.
- Silence the vdso "no previous prototype" warning.
- Mark start_backtrace() notrace and NOKPROBE_SYMBOL.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: cpufeature: List early Cortex-A510 parts as having broken dbm
kselftest/arm64: Correct logging of FPSIMD register read via ptrace
kselftest/arm64: Skip VL_INHERIT tests for unsupported vector types
arm64: errata: Add detection for TRBE trace data corruption
arm64: errata: Add detection for TRBE invalid prohibited states
arm64: errata: Add detection for TRBE ignored system register writes
arm64: Add Cortex-A510 CPU part definition
arm64: extable: fix load_unaligned_zeropad() reg indices
arm64: Mark start_backtrace() notrace and NOKPROBE_SYMBOL
arm64: errata: Update ARM64_ERRATUM_[2119858|2224489] with Cortex-X2 ranges
arm64: Add Cortex-X2 CPU part definition
arm64: vdso: Fix "no previous prototype" warning
Pull documentation fixes from Jonathan Corbet:
"A few documentation fixes for 5.17"
* tag 'docs-5.17-3' of git://git.lwn.net/linux:
docs/vm: Fix typo in *harden*
Documentation: arm: marvell: Extend Avanta list
docs: fix typo in Documentation/kernel-hacking/locking.rst
docs: Hook the RTLA documents into the kernel docs build
Pull kvm fixes from Paolo Bonzini:
"Two larger x86 series:
- Redo incorrect fix for SEV/SMAP erratum
- Windows 11 Hyper-V workaround
Other x86 changes:
- Various x86 cleanups
- Re-enable access_tracking_perf_test
- Fix for #GP handling on SVM
- Fix for CPUID leaf 0Dh in KVM_GET_SUPPORTED_CPUID
- Fix for ICEBP in interrupt shadow
- Avoid false-positive RCU splat
- Enable Enlightened MSR-Bitmap support for real
ARM:
- Correctly update the shadow register on exception injection when
running in nVHE mode
- Correctly use the mm_ops indirection when performing cache
invalidation from the page-table walker
- Restrict the vgic-v3 workaround for SEIS to the two known broken
implementations
Generic code changes:
- Dead code cleanup"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
KVM: eventfd: Fix false positive RCU usage warning
KVM: nVMX: Allow VMREAD when Enlightened VMCS is in use
KVM: nVMX: Implement evmcs_field_offset() suitable for handle_vmread()
KVM: nVMX: Rename vmcs_to_field_offset{,_table}
KVM: nVMX: eVMCS: Filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER
KVM: nVMX: Also filter MSR_IA32_VMX_TRUE_PINBASED_CTLS when eVMCS
selftests: kvm: check dynamic bits against KVM_X86_XCOMP_GUEST_SUPP
KVM: x86: add system attribute to retrieve full set of supported xsave states
KVM: x86: Add a helper to retrieve userspace address from kvm_device_attr
selftests: kvm: move vm_xsave_req_perm call to amx_test
KVM: x86: Sync the states size with the XCR0/IA32_XSS at, any time
KVM: x86: Update vCPU's runtime CPUID on write to MSR_IA32_XSS
KVM: x86: Keep MSR_IA32_XSS unchanged for INIT
KVM: x86: Free kvm_cpuid_entry2 array on post-KVM_RUN KVM_SET_CPUID{,2}
KVM: nVMX: WARN on any attempt to allocate shadow VMCS for vmcs02
KVM: selftests: Don't skip L2's VMCALL in SMM test for SVM guest
KVM: x86: Check .flags in kvm_cpuid_check_equal() too
KVM: x86: Forcibly leave nested virt when SMM state is toggled
KVM: SVM: drop unnecessary code in svm_hv_vmcb_dirty_nested_enlightenments()
KVM: SVM: hyper-v: Enable Enlightened MSR-Bitmap support for real
...
coresight: trbe: Workaround Cortex-A510 erratas
This pull request is providing arm64 definitions to support
TRBE Cortex-A510 erratas.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
* tag 'trbe-cortex-a510-errata' of gitolite.kernel.org:pub/scm/linux/kernel/git/coresight/linux:
arm64: errata: Add detection for TRBE trace data corruption
arm64: errata: Add detection for TRBE invalid prohibited states
arm64: errata: Add detection for TRBE ignored system register writes
arm64: Add Cortex-A510 CPU part definition
Because KVM_GET_SUPPORTED_CPUID is meant to be passed (by simple-minded
VMMs) to KVM_SET_CPUID2, it cannot include any dynamic xsave states that
have not been enabled. Probing those, for example so that they can be
passed to ARCH_REQ_XCOMP_GUEST_PERM, requires a new ioctl or arch_prctl.
The latter is in fact worse, even though that is what the rest of the
API uses, because it would require supported_xcr0 to be moved from the
KVM module to the kernel just for this use. In addition, the value
would be nonsensical (or an error would have to be returned) until
the KVM module is loaded in.
Therefore, to limit the growth of system ioctls, add a /dev/kvm
variant of KVM_{GET,HAS}_DEVICE_ATTR, and implement it in x86
with just one group (0) and attribute (KVM_X86_XCOMP_GUEST_SUPP).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and can.
Current release - new code bugs:
- tcp: add a missing sk_defer_free_flush() in tcp_splice_read()
- tcp: add a stub for sk_defer_free_flush(), fix CONFIG_INET=n
- nf_tables: set last expression in register tracking area
- nft_connlimit: fix memleak if nf_ct_netns_get() fails
- mptcp: fix removing ids bitmap setting
- bonding: use rcu_dereference_rtnl when getting active slave
- fix three cases of sleep in atomic context in drivers: lan966x, gve
- handful of build fixes for esoteric drivers after netdev->dev_addr
was made const
Previous releases - regressions:
- revert "ipv6: Honor all IPv6 PIO Valid Lifetime values", it broke
Linux compatibility with USGv6 tests
- procfs: show net device bound packet types
- ipv4: fix ip option filtering for locally generated fragments
- phy: broadcom: hook up soft_reset for BCM54616S
Previous releases - always broken:
- ipv4: raw: lock the socket in raw_bind()
- ipv4: decrease the use of shared IPID generator to decrease the
chance of attackers guessing the values
- procfs: fix cross-netns information leakage in /proc/net/ptype
- ethtool: fix link extended state for big endian
- bridge: vlan: fix single net device option dumping
- ping: fix the sk_bound_dev_if match in ping_lookup"
* tag 'net-5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
net: bridge: vlan: fix memory leak in __allowed_ingress
net: socket: rename SKB_DROP_REASON_SOCKET_FILTER
ipv4: remove sparse error in ip_neigh_gw4()
ipv4: avoid using shared IP generator for connected sockets
ipv4: tcp: send zero IPID in SYNACK messages
ipv4: raw: lock the socket in raw_bind()
MAINTAINERS: add missing IPv4/IPv6 header paths
MAINTAINERS: add more files to eth PHY
net: stmmac: dwmac-sun8i: use return val of readl_poll_timeout()
net: bridge: vlan: fix single net device option dumping
net: stmmac: skip only stmmac_ptp_register when resume from suspend
net: stmmac: configure PTP clock source prior to PTP initialization
Revert "ipv6: Honor all IPv6 PIO Valid Lifetime values"
connector/cn_proc: Use task_is_in_init_pid_ns()
pid: Introduce helper task_is_in_init_pid_ns()
gve: Fix GFP flags when allocing pages
net: lan966x: Fix sleep in atomic context when updating MAC table
net: lan966x: Fix sleep in atomic context when injecting frames
ethernet: seeq/ether3: don't write directly to netdev->dev_addr
ethernet: 8390/etherh: don't write directly to netdev->dev_addr
...
