Pull netfs updates from Christian Brauner:
"This extends the netfs helper library that network filesystems can use
to replace their own implementations. Both afs and 9p are ported. cifs
is ready as well but the patches are way bigger and will be routed
separately once this is merged. That will remove lots of code as well.
The overal goal is to get high-level I/O and knowledge of the page
cache and ouf of the filesystem drivers. This includes knowledge about
the existence of pages and folios
The pull request converts afs and 9p. This removes about 800 lines of
code from afs and 300 from 9p. For 9p it is now possible to do writes
in larger than a page chunks. Additionally, multipage folio support
can be turned on for 9p. Separate patches exist for cifs removing
another 2000+ lines. I've included detailed information in the
individual pulls I took.
Summary:
- Add NFS-style (and Ceph-style) locking around DIO vs buffered I/O
calls to prevent these from happening at the same time.
- Support for direct and unbuffered I/O.
- Support for write-through caching in the page cache.
- O_*SYNC and RWF_*SYNC writes use write-through rather than writing
to the page cache and then flushing afterwards.
- Support for write-streaming.
- Support for write grouping.
- Skip reads for which the server could only return zeros or EOF.
- The fscache module is now part of the netfs library and the
corresponding maintainer entry is updated.
- Some helpers from the fscache subsystem are renamed to mark them as
belonging to the netfs library.
- Follow-up fixes for the netfs library.
- Follow-up fixes for the 9p conversion"
* tag 'vfs-6.8.netfs' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (50 commits)
netfs: Fix wrong #ifdef hiding wait
cachefiles: Fix signed/unsigned mixup
netfs: Fix the loop that unmarks folios after writing to the cache
netfs: Fix interaction between write-streaming and cachefiles culling
netfs: Count DIO writes
netfs: Mark netfs_unbuffered_write_iter_locked() static
netfs: Fix proc/fs/fscache symlink to point to "netfs" not "../netfs"
netfs: Rearrange netfs_io_subrequest to put request pointer first
9p: Use length of data written to the server in preference to error
9p: Do a couple of cleanups
9p: Fix initialisation of netfs_inode for 9p
cachefiles: Fix __cachefiles_prepare_write()
9p: Use netfslib read/write_iter
afs: Use the netfs write helpers
netfs: Export the netfs_sreq tracepoint
netfs: Optimise away reads above the point at which there can be no data
netfs: Implement a write-through caching option
netfs: Provide a launder_folio implementation
netfs: Provide a writepages implementation
netfs, cachefiles: Pass upper bound length to allow expansion
...
Pull more s390 updates from Alexander Gordeev:
- do not enable by default the support of 31-bit Enterprise Systems
Architecture (ESA) ELF binaries
- drop automatic CONFIG_KEXEC selection, while set CONFIG_KEXEC=y
explicitly for defconfig and debug_defconfig only
- fix zpci_get_max_io_size() to allow PCI block stores where normal PCI
stores were used otherwise
- remove unneeded tsk variable in do_exception() fault handler
- __load_fpu_regs() is only called from the core kernel code.
Therefore, remove not needed EXPORT_SYMBOL.
- remove leftover comment from s390_fpregs_set() callback
- few cleanups to Processor Activity Instrumentation (PAI) code (which
perf framework is based on)
- replace Wenjia Zhang with Thorsten Winkler as s390 Inter-User
Communication Vehicle (IUCV) networking maintainer
- Fix all scenarios where queues previously removed from a guest's
Adjunct-Processor (AP) configuration do not re-appear in a reset
state when they are subsequently made available to a guest again
* tag 's390-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vfio-ap: do not reset queue removed from host config
s390/vfio-ap: reset queues associated with adapter for queue unbound from driver
s390/vfio-ap: reset queues filtered from the guest's AP config
s390/vfio-ap: let on_scan_complete() callback filter matrix and update guest's APCB
s390/vfio-ap: loop over the shadow APCB when filtering guest's AP configuration
s390/vfio-ap: always filter entire AP matrix
s390/net: add Thorsten Winkler as maintainer
s390/pai_ext: split function paiext_push_sample
s390/pai_ext: rework function paiext_copy argments
s390/pai: rework paiXXX_start and paiXXX_stop functions
s390/pai_crypto: split function paicrypt_push_sample
s390/pai: rework paixxxx_getctr interface
s390/ptrace: remove leftover comment
s390/fpu: remove __load_fpu_regs() export
s390/mm,fault: remove not needed tsk variable
s390/pci: fix max size calculation in zpci_memcpy_toio()
s390/kexec: do not automatically select KEXEC option
s390/compat: change default for CONFIG_COMPAT to "n"
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
Split function paiext_push_sample() into two parts. The first part
determines the number of bytes to store as raw data in the perf sample
record. This is now function paiext_have_sample().
The second part stores the raw data in the perf event's ring buffer.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Change the function paiext_copy() parameter from a pointer to a
structure to two pointers to memory areas referenced. The other
members of that structure are not needed.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The PAI crypto counter and PAI NNPA counters start and stop functions
are streamlined. Move the conditions to invoke start and stop functions
to its respective function body and call them unconditionally.
The start and stop functions now determine how to proceed.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Split function paicrypt_push_sample() into two parts. The first part
determines the number of bytes to store as raw data in the perf sample
record. The second part stores the raw data in the perf event's
ring buffer.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Simplify the interface for functions paicrypt_getctr() and
paiext_getctr(). Change the first parameter from a pointer to a
structure to a pointer to a structure member. The other members
of the structure are not needed.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs
reorganization and a significant amount of changes is around
self-tests.
Core & protocols:
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up build
time warnings to safeguard against future header changes
This improves TCP performances with many concurrent connections up
to 40%
- Add page-pool netlink-based introspection, exposing the memory
usage and recycling stats. This helps indentify bad PP users and
possible leaks
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
lowers the time taken by connect() for hosts having many active
connections to the same destination
- Refactor the TCP bind conflict code, shrinking related socket
structs
- Refactor TCP SYN-Cookie handling, as a preparation step to allow
arbitrary SYN-Cookie processing via eBPF
- Tune optmem_max for 0-copy usage, increasing the default value to
128KB and namespecifying it
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations
- Reduce extension header parsing overhead at GRO time
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries
- Reorder nftables struct members, to keep data accessed by the
datapath first
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex)
- More data-race annotations
- Extend the diag interface to dump TCP bound-only sockets
- Conditional notification of events for TC qdisc class and actions
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID
- Implement SMCv2.1 virtual ISM device support
- Add support for Batman-avd mulicast packet type
BPF:
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers.
This improves the verifier "instructions processed" metric from
single digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer
experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques
- Support uid/gid options when mounting bpffs
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is
identified by its id
- Extend verifier to allow bpf_refcount_acquire() of a map value
field obtained via direct load which is a use-case needed in
sched_ext
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter
- Support for VLAN tag in XDP hints
- Remove deprecated bpfilter kernel leftovers given the project is
developed in user-space (https://github.com/facebook/bpfilter)
Misc:
- Support for parellel TC self-tests execution
- Increase MPTCP self-tests coverage
- Updated the bridge documentation, including several so-far
undocumented features
- Convert all the net self-tests to run in unique netns, to avoid
random failures due to conflict and allow concurrent runs
- Add TCP-AO self-tests
- Add kunit tests for both cfg80211 and mac80211
- Autogenerate Netlink families documentation from YAML spec
- Add yml-gen support for fixed headers and recursive nests, the tool
can now generate user-space code for all genetlink families for
which we have specs
- A bunch of additional module descriptions fixes
- Catch incorrect freeing of pages belonging to a page pool
Driver API:
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host
- Add support for ethtool symmetric-xor RSS hash
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute
- Convert older drivers to platform remove callback returning void
- Add support for PHY package MMD read/write
New hardware / drivers:
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed:
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Driver updates:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running
timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will
allow in future releases combining multiple PFs devices
attached to different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion
for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications
for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring
param, coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine
driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync"
* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
lan78xx: remove redundant statement in lan78xx_get_eee
lan743x: remove redundant statement in lan743x_ethtool_get_eee
bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
tcp: Revert no longer abort SYN_SENT when receiving some ICMP
Revert "mlx5 updates 2023-12-20"
Revert "net: stmmac: Enable Per DMA Channel interrupt"
ipvlan: Remove usage of the deprecated ida_simple_xx() API
ipvlan: Fix a typo in a comment
net/sched: Remove ipt action tests
net: stmmac: Use interrupt mode INTM=1 for per channel irq
net: stmmac: Add support for TX/RX channel interrupt
net: stmmac: Make MSI interrupt routine generic
dt-bindings: net: snps,dwmac: per channel irq
net: phy: at803x: make read_status more generic
net: phy: at803x: add support for cdt cross short test for qca808x
net: phy: at803x: refactor qca808x cable test get status function
net: phy: at803x: generalize cdt fault length function
net: ethernet: cortina: Drop TSO support
...
The code which validates floating point control register contents was
reworked with commit 702644249d ("s390/fpu: get rid of test_fp_ctl()").
There is still a comment which refers to the old implementation - remove it
in order to avoid confusion.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
__load_fpu_regs() is only called from core kernel code.
Therefore remove the not needed export.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
tsk is only used as an intermediate variable for current. Remove tsk
and use current directly instead at the only place where it is used.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The zpci_get_max_write_size() helper is used to determine the maximum
size a PCI store or load can use at a given __iomem address.
For the PCI block store the following restrictions apply:
1. The dst + len must not cross a 4K boundary in the (pseudo-)MMIO space
2. len must not exceed ZPCI_MAX_WRITE_SIZE
3. len must be a multiple of 8 bytes
4. The src address must be double word (8 byte) aligned
5. The dst address must be double word (8 byte) aligned
Otherwise only a normal PCI store which takes its src value from
a register can be used. For these PCI store restriction 1 still applies.
Similarly 1 also applies to PCI loads.
It turns out zpci_max_write_size() instead implements stricter
conditions which prevents PCI block stores from being used where they
can and should be used. In particular instead of conditions 4 and 5 it
wrongly enforces both dst and src to be size aligned. This indirectly
covers condition 1 but also prevents many legal PCI block stores.
On top of the functional shortcomings the zpci_get_max_write_size() is
misnamed as it is used for both read and write size calculations. Rename
it to zpci_get_max_io_size() and implement the listed conditions
explicitly.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Fixes: cd24834130 ("s390/pci: base support")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
[agordeev@linux.ibm.com replaced spaces with tabs]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Following commit dccf78d39f ("kernel/Kconfig.kexec: drop
select of KEXEC for CRASH_DUMP") also drop automatic KEXEC
selection for s390 while set CONFIG_KEXEC=y explicitly for
defconfig and debug_defconfig targets. zfcpdump_defconfig
target gets CONFIG_KEXEC unset as result, which is right
and consistent with CONFIG_KEXEC_FILE besides.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
31 bit support has been removed from the kernel more than eight years
ago. The last 31 bit distribution is many years older. There shouldn't be
any 31 bit code around anymore.
Therefore avoid providing an unused and only partially tested user space
interface and change the default for CONFIG_COMPAT from "yes" to "no".
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Pull s390 updates from Alexander Gordeev:
- Add machine variable capacity information to /proc/sysinfo.
- Limit the waste of page tables and always align vmalloc area size and
base address on segment boundary.
- Fix a memory leak when an attempt to register interruption sub class
(ISC) for the adjunct-processor (AP) guest failed.
- Reset response code AP_RESPONSE_INVALID_GISA to understandable by
guest AP_RESPONSE_INVALID_ADDRESS in response to a failed
interruption sub class (ISC) registration attempt.
- Improve reaction to adjunct-processor (AP)
AP_RESPONSE_OTHERWISE_CHANGED response code when enabling interrupts
on behalf of a guest.
- Fix incorrect sysfs 'status' attribute of adjunct-processor (AP)
queue device bound to the vfio_ap device driver when the mediated
device is attached to a guest, but the queue device is not passed
through.
- Rework struct ap_card to hold the whole adjunct-processor (AP) card
hardware information. As result, all the ugly bit checks are replaced
by simple evaluations of the required bit fields.
- Improve handling of some weird scenarios between service element (SE)
host and SE guest with adjunct-processor (AP) pass-through support.
- Change local_ctl_set_bit() and local_ctl_clear_bit() so they return
the previous value of the to be changed control register. This is
useful if a bit is only changed temporarily and the previous content
needs to be restored.
- The kernel starts with machine checks disabled and is expected to
enable it once trap_init() is called. However the implementation
allows machine checks early. Consistently enable it in trap_init()
only.
- local_mcck_disable() and local_mcck_enable() assume that machine
checks are always enabled. Instead implement and use
local_mcck_save() and local_mcck_restore() to disable machine checks
and restore the previous state.
- Modification of floating point control (FPC) register of a traced
process using ptrace interface may lead to corruption of the FPC
register of the tracing process. Fix this.
- kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point
control (FPC) register in vCPU, but may lead to corruption of the FPC
register of the host process. Fix this.
- Use READ_ONCE() to read a vCPU floating point register value from the
memory mapped area. This avoids that, depending on code generation, a
different value is tested for validity than the one that is used.
- Get rid of test_fp_ctl(), since it is quite subtle to use it
correctly. Instead copy a new floating point control register value
into its save area and test the validity of the new value when
loading it.
- Remove superfluous save_fpu_regs() call.
- Remove s390 support for ARCH_WANTS_DYNAMIC_TASK_STRUCT. All machines
provide the vector facility since many years and the need to make the
task structure size dependent on the vector facility does not exist.
- Remove the "novx" kernel command line option, as the vector code runs
without any problems since many years.
- Add the vector facility to the z13 architecture level set (ALS). All
hypervisors support the vector facility since many years. This allows
compile time optimizations of the kernel.
- Get rid of MACHINE_HAS_VX and replace it with cpu_has_vx(). As
result, the compiled code will have less runtime checks and less
code.
- Convert pgste_get_lock() and pgste_set_unlock() ASM inlines to C.
- Convert the struct subchannel spinlock from pointer to member.
* tag 's390-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits)
Revert "s390: update defconfigs"
s390/cio: make sch->lock spinlock pointer a member
s390: update defconfigs
s390/mm: convert pgste locking functions to C
s390/fpu: get rid of MACHINE_HAS_VX
s390/als: add vector facility to z13 architecture level set
s390/fpu: remove "novx" option
s390/fpu: remove ARCH_WANTS_DYNAMIC_TASK_STRUCT support
KVM: s390: remove superfluous save_fpu_regs() call
s390/fpu: get rid of test_fp_ctl()
KVM: s390: use READ_ONCE() to read fpc register value
KVM: s390: fix setting of fpc register
s390/ptrace: handle setting of fpc register correctly
s390/nmi: implement and use local_mcck_save() / local_mcck_restore()
s390/nmi: consistently enable machine checks in trap_init()
s390/ctlreg: return old register contents when changing bits
s390/ap: handle outband SE bind state change
s390/ap: store TAPQ hwinfo in struct ap_card
s390/vfio-ap: fix sysfs status attribute for AP queue devices
s390/vfio-ap: improve reaction to response code 07 from PQAP(AQIC) command
...
Pull asm-generic cleanups from Arnd Bergmann:
"A series from Baoquan He cleans up the asm-generic/io.h to remove the
ioremap_uc() definition from everything except x86, which still needs
it for pre-PAT systems. This series notably contains a patch from
Jiaxun Yang that converts MIPS to use asm-generic/io.h like every
other architecture does, enabling future cleanups.
Some of my own patches fix -Wmissing-prototype warnings in
architecture specific code across several architectures. This is now
needed as the warning is enabled by default. There are still some
remaining warnings in minor platforms, but the series should catch
most of the widely used ones make them more consistent with one
another.
David McKay fixes a bug in __generic_cmpxchg_local() when this is used
on 64-bit architectures. This could currently only affect parisc64 and
sparc64.
Additional cleanups address from Linus Walleij, Uwe Kleine-König,
Thomas Huth, and Kefeng Wang help reduce unnecessary inconsistencies
between architectures"
* tag 'asm-generic-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: Fix 32 bit __generic_cmpxchg_local
Hexagon: Make pfn accessors statics inlines
ARC: mm: Make virt_to_pfn() a static inline
mips: remove extraneous asm-generic/iomap.h include
sparc: Use $(kecho) to announce kernel images being ready
arm64: vdso32: Define BUILD_VDSO32_64 to correct prototypes
csky: fix arch_jump_label_transform_static override
arch: add do_page_fault prototypes
arch: add missing prepare_ftrace_return() prototypes
arch: vdso: consolidate gettime prototypes
arch: include linux/cpu.h for trap_init() prototype
arch: fix asm-offsets.c building with -Wmissing-prototypes
arch: consolidate arch_irq_work_raise prototypes
hexagon: Remove CONFIG_HEXAGON_ARCH_VERSION from uapi header
asm/io: remove unnecessary xlate_dev_mem_ptr() and unxlate_dev_mem_ptr()
mips: io: remove duplicated codes
arch/*/io.h: remove ioremap_uc in some architectures
mips: add <asm-generic/io.h> including
Pull header cleanups from Kent Overstreet:
"The goal is to get sched.h down to a type only header, so the main
thing happening in this patchset is splitting out various _types.h
headers and dependency fixups, as well as moving some things out of
sched.h to better locations.
This is prep work for the memory allocation profiling patchset which
adds new sched.h interdepencencies"
* tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits)
Kill sched.h dependency on rcupdate.h
kill unnecessary thread_info.h include
Kill unnecessary kernel.h include
preempt.h: Kill dependency on list.h
rseq: Split out rseq.h from sched.h
LoongArch: signal.c: add header file to fix build error
restart_block: Trim includes
lockdep: move held_lock to lockdep_types.h
sem: Split out sem_types.h
uidgid: Split out uidgid_types.h
seccomp: Split out seccomp_types.h
refcount: Split out refcount_types.h
uapi/linux/resource.h: fix include
x86/signal: kill dependency on time.h
syscall_user_dispatch.h: split out *_types.h
mm_types_task.h: Trim dependencies
Split out irqflags_types.h
ipc: Kill bogus dependency on spinlock.h
shm: Slim down dependencies
workqueue: Split out workqueue_types.h
...
Pull security module updates from Paul Moore:
- Add three new syscalls: lsm_list_modules(), lsm_get_self_attr(), and
lsm_set_self_attr().
The first syscall simply lists the LSMs enabled, while the second and
third get and set the current process' LSM attributes. Yes, these
syscalls may provide similar functionality to what can be found under
/proc or /sys, but they were designed to support multiple,
simultaneaous (stacked) LSMs from the start as opposed to the current
/proc based solutions which were created at a time when only one LSM
was allowed to be active at a given time.
We have spent considerable time discussing ways to extend the
existing /proc interfaces to support multiple, simultaneaous LSMs and
even our best ideas have been far too ugly to support as a kernel
API; after +20 years in the kernel, I felt the LSM layer had
established itself enough to justify a handful of syscalls.
Support amongst the individual LSM developers has been nearly
unanimous, with a single objection coming from Tetsuo (TOMOYO) as he
is worried that the LSM_ID_XXX token concept will make it more
difficult for out-of-tree LSMs to survive. Several members of the LSM
community have demonstrated the ability for out-of-tree LSMs to
continue to exist by picking high/unused LSM_ID values as well as
pointing out that many kernel APIs rely on integer identifiers, e.g.
syscalls (!), but unfortunately Tetsuo's objections remain.
My personal opinion is that while I have no interest in penalizing
out-of-tree LSMs, I'm not going to penalize in-tree development to
support out-of-tree development, and I view this as a necessary step
forward to support the push for expanded LSM stacking and reduce our
reliance on /proc and /sys which has occassionally been problematic
for some container users. Finally, we have included the linux-api
folks on (all?) recent revisions of the patchset and addressed all of
their concerns.
- Add a new security_file_ioctl_compat() LSM hook to handle the 32-bit
ioctls on 64-bit systems problem.
This patch includes support for all of the existing LSMs which
provide ioctl hooks, although it turns out only SELinux actually
cares about the individual ioctls. It is worth noting that while
Casey (Smack) and Tetsuo (TOMOYO) did not give explicit ACKs to this
patch, they did both indicate they are okay with the changes.
- Fix a potential memory leak in the CALIPSO code when IPv6 is disabled
at boot.
While it's good that we are fixing this, I doubt this is something
users are seeing in the wild as you need to both disable IPv6 and
then attempt to configure IPv6 labeled networking via
NetLabel/CALIPSO; that just doesn't make much sense.
Normally this would go through netdev, but Jakub asked me to take
this patch and of all the trees I maintain, the LSM tree seemed like
the best fit.
- Update the LSM MAINTAINERS entry with additional information about
our process docs, patchwork, bug reporting, etc.
I also noticed that the Lockdown LSM is missing a dedicated
MAINTAINERS entry so I've added that to the pull request. I've been
working with one of the major Lockdown authors/contributors to see if
they are willing to step up and assume a Lockdown maintainer role;
hopefully that will happen soon, but in the meantime I'll continue to
look after it.
- Add a handful of mailmap entries for Serge Hallyn and myself.
* tag 'lsm-pr-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (27 commits)
lsm: new security_file_ioctl_compat() hook
lsm: Add a __counted_by() annotation to lsm_ctx.ctx
calipso: fix memory leak in netlbl_calipso_add_pass()
selftests: remove the LSM_ID_IMA check in lsm/lsm_list_modules_test
MAINTAINERS: add an entry for the lockdown LSM
MAINTAINERS: update the LSM entry
mailmap: add entries for Serge Hallyn's dead accounts
mailmap: update/replace my old email addresses
lsm: mark the lsm_id variables are marked as static
lsm: convert security_setselfattr() to use memdup_user()
lsm: align based on pointer length in lsm_fill_user_ctx()
lsm: consolidate buffer size handling into lsm_fill_user_ctx()
lsm: correct error codes in security_getselfattr()
lsm: cleanup the size counters in security_getselfattr()
lsm: don't yet account for IMA in LSM_CONFIG_COUNT calculation
lsm: drop LSM_ID_IMA
LSM: selftests for Linux Security Module syscalls
SELinux: Add selfattr hooks
AppArmor: Add selfattr hooks
Smack: implement setselfattr and getselfattr hooks
...
Pull non-MM updates from Andrew Morton:
"Quite a lot of kexec work this time around. Many singleton patches in
many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in 'nilfs2: Folio
conversions for file paths'.
- Additional nilfs2 folio conversion from Ryusuke Konishi in 'nilfs2:
Folio conversions for directory paths'.
- IA64 remnant removal in Heiko Carstens's 'Remove unused code after
IA-64 removal'.
- Arnd Bergmann has enabled the -Wmissing-prototypes warning
everywhere in 'Treewide: enable -Wmissing-prototypes'. This had
some followup fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
'hexagon: Fix up instances of -Wmissing-prototypes'.
- Nathan also addressed some s390 warnings in 's390: A couple of
fixes for -Wmissing-prototypes'.
- Arnd Bergmann addresses the same warnings for MIPS in his series
'mips: address -Wmissing-prototypes warnings'.
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series 'kexec_file: Load kernel at top
of system RAM if required'
- Baoquan He has also added the self-explanatory 'kexec_file: print
out debugging message if required'.
- Some checkstack maintenance work from Tiezhu Yang in the series
'Modify some code about checkstack'.
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is
'watchdog: Better handling of concurrent lockups'.
- Yuntao Wang has contributed some maintenance work on the crash code
in 'crash: Some cleanups and fixes'"
* tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (157 commits)
crash_core: fix and simplify the logic of crash_exclude_mem_range()
x86/crash: use SZ_1M macro instead of hardcoded value
x86/crash: remove the unused image parameter from prepare_elf_headers()
kdump: remove redundant DEFAULT_CRASH_KERNEL_LOW_SIZE
scripts/decode_stacktrace.sh: strip unexpected CR from lines
watchdog: if panicking and we dumped everything, don't re-enable dumping
watchdog/hardlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/softlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/hardlockup: adopt softlockup logic avoiding double-dumps
kexec_core: fix the assignment to kimage->control_page
x86/kexec: fix incorrect end address passed to kernel_ident_mapping_init()
lib/trace_readwrite.c:: replace asm-generic/io with linux/io
nilfs2: cpfile: fix some kernel-doc warnings
stacktrace: fix kernel-doc typo
scripts/checkstack.pl: fix no space expression between sp and offset
x86/kexec: fix incorrect argument passed to kexec_dprintk()
x86/kexec: use pr_err() instead of kexec_dprintk() when an error occurs
nilfs2: add missing set_freezable() for freezable kthread
kernel: relay: remove relay_file_splice_read dead code, doesn't work
docs: submit-checklist: remove all of "make namespacecheck"
...
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
Pull slab updates from Vlastimil Babka:
- SLUB: delayed freezing of CPU partial slabs (Chengming Zhou)
Freezing is an operation involving double_cmpxchg() that makes a slab
exclusive for a particular CPU. Chengming noticed that we use it also
in situations where we are not yet installing the slab as the CPU
slab, because freezing also indicates that the slab is not on the
shared list. This results in redundant freeze/unfreeze operation and
can be avoided by marking separately the shared list presence by
reusing the PG_workingset flag.
This approach neatly avoids the issues described in 9b1ea29bc0
("Revert "mm, slub: consider rest of partial list if acquire_slab()
fails"") as we can now grab a slab from the shared list in a quick
and guaranteed way without the cmpxchg_double() operation that
amplifies the lock contention and can fail.
As a result, lkp has reported 34.2% improvement of
stress-ng.rawudp.ops_per_sec
- SLAB removal and SLUB cleanups (Vlastimil Babka)
The SLAB allocator has been deprecated since 6.5 and nobody has
objected so far. We agreed at LSF/MM to wait until the next LTS,
which is 6.6, so we should be good to go now.
This doesn't yet erase all traces of SLAB outside of mm/ so some dead
code, comments or documentation remain, and will be cleaned up
gradually (some series are already in the works).
Removing the choice of allocators has already allowed to simplify and
optimize the code wiring up the kmalloc APIs to the SLUB
implementation.
* tag 'slab-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (34 commits)
mm/slub: free KFENCE objects in slab_free_hook()
mm/slub: handle bulk and single object freeing separately
mm/slub: introduce __kmem_cache_free_bulk() without free hooks
mm/slub: fix bulk alloc and free stats
mm/slub: optimize free fast path code layout
mm/slub: optimize alloc fastpath code layout
mm/slub: remove slab_alloc() and __kmem_cache_alloc_lru() wrappers
mm/slab: move kmalloc() functions from slab_common.c to slub.c
mm/slab: move kmalloc_slab() to mm/slab.h
mm/slab: move kfree() from slab_common.c to slub.c
mm/slab: move struct kmem_cache_node from slab.h to slub.c
mm/slab: move memcg related functions from slab.h to slub.c
mm/slab: move pre/post-alloc hooks from slab.h to slub.c
mm/slab: consolidate includes in the internal mm/slab.h
mm/slab: move the rest of slub_def.h to mm/slab.h
mm/slab: move struct kmem_cache_cpu declaration to slub.c
mm/slab: remove mm/slab.c and slab_def.h
mm/mempool/dmapool: remove CONFIG_DEBUG_SLAB ifdefs
mm/slab: remove CONFIG_SLAB code from slab common code
cpu/hotplug: remove CPUHP_SLAB_PREPARE hooks
...
Pull vfs mount updates from Christian Brauner:
"This contains the work to retrieve detailed information about mounts
via two new system calls. This is hopefully the beginning of the end
of the saga that started with fsinfo() years ago.
The LWN articles in [1] and [2] can serve as a summary so we can avoid
rehashing everything here.
At LSFMM in May 2022 we got into a room and agreed on what we want to
do about fsinfo(). Basically, split it into pieces. This is the first
part of that agreement. Specifically, it is concerned with retrieving
information about mounts. So this only concerns the mount information
retrieval, not the mount table change notification, or the extended
filesystem specific mount option work. That is separate work.
Currently mounts have a 32bit id. Mount ids are already in heavy use
by libmount and other low-level userspace but they can't be relied
upon because they're recycled very quickly. We agreed that mounts
should carry a unique 64bit id by which they can be referenced
directly. This is now implemented as part of this work.
The new 64bit mount id is exposed in statx() through the new
STATX_MNT_ID_UNIQUE flag. If the flag isn't raised the old mount id is
returned. If it is raised and the kernel supports the new 64bit mount
id the flag is raised in the result mask and the new 64bit mount id is
returned. New and old mount ids do not overlap so they cannot be
conflated.
Two new system calls are introduced that operate on the 64bit mount
id: statmount() and listmount(). A summary of the api and usage can be
found on LWN as well (cf. [3]) but of course, I'll provide a summary
here as well.
Both system calls rely on struct mnt_id_req. Which is the request
struct used to pass the 64bit mount id identifying the mount to
operate on. It is extensible to allow for the addition of new
parameters and for future use in other apis that make use of mount
ids.
statmount() mimicks the semantics of statx() and exposes a set flags
that userspace may raise in mnt_id_req to request specific information
to be retrieved. A statmount() call returns a struct statmount filled
in with information about the requested mount. Supported requests are
indicated by raising the request flag passed in struct mnt_id_req in
the @mask argument in struct statmount.
Currently we do support:
- STATMOUNT_SB_BASIC:
Basic filesystem info
- STATMOUNT_MNT_BASIC
Mount information (mount id, parent mount id, mount attributes etc)
- STATMOUNT_PROPAGATE_FROM
Propagation from what mount in current namespace
- STATMOUNT_MNT_ROOT
Path of the root of the mount (e.g., mount --bind /bla /mnt returns /bla)
- STATMOUNT_MNT_POINT
Path of the mount point (e.g., mount --bind /bla /mnt returns /mnt)
- STATMOUNT_FS_TYPE
Name of the filesystem type as the magic number isn't enough due to submounts
The string options STATMOUNT_MNT_{ROOT,POINT} and STATMOUNT_FS_TYPE
are appended to the end of the struct. Userspace can use the offsets
in @fs_type, @mnt_root, and @mnt_point to reference those strings
easily.
The struct statmount reserves quite a bit of space currently for
future extensibility. This isn't really a problem and if this bothers
us we can just send a follow-up pull request during this cycle.
listmount() is given a 64bit mount id via mnt_id_req just as
statmount(). It takes a buffer and a size to return an array of the
64bit ids of the child mounts of the requested mount. Userspace can
thus choose to either retrieve child mounts for a mount in batches or
iterate through the child mounts. For most use-cases it will be
sufficient to just leave space for a few child mounts. But for big
mount tables having an iterator is really helpful. Iterating through a
mount table works by setting @param in mnt_id_req to the mount id of
the last child mount retrieved in the previous listmount() call"
Link: https://lwn.net/Articles/934469 [1]
Link: https://lwn.net/Articles/829212 [2]
Link: https://lwn.net/Articles/950569 [3]
* tag 'vfs-6.8.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
add selftest for statmount/listmount
fs: keep struct mnt_id_req extensible
wire up syscalls for statmount/listmount
add listmount(2) syscall
statmount: simplify string option retrieval
statmount: simplify numeric option retrieval
add statmount(2) syscall
namespace: extract show_path() helper
mounts: keep list of mounts in an rbtree
add unique mount ID
Common KVM changes for 6.8:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures.
CONFIG_HAVE_KVM is currently used by some architectures to either
enabled the KVM config proper, or to enable host-side code that is
not part of the KVM module. However, CONFIG_KVM's "select" statement
in virt/kvm/Kconfig corresponds to a third meaning, namely to
enable common Kconfigs required by all architectures that support
KVM.
These three meanings can be replaced respectively by an
architecture-specific Kconfig, by IS_ENABLED(CONFIG_KVM), or by
a new Kconfig symbol that is in turn selected by the
architecture-specific "config KVM".
Start by introducing such a new Kconfig symbol, CONFIG_KVM_COMMON.
Unlike CONFIG_HAVE_KVM, it is selected by CONFIG_KVM, not by
architecture code, and it brings in all dependencies of common
KVM code. In particular, INTERVAL_TREE was missing in loongarch
and riscv, so that is another thing that is fixed.
Fixes: 8132d887a7 ("KVM: remove CONFIG_HAVE_KVM_EVENTFD", 2023-12-08)
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/all/44907c6b-c5bd-4e4a-a921-e4d3825539d8@infradead.org/
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-01-05
We've added 40 non-merge commits during the last 2 day(s) which contain
a total of 73 files changed, 1526 insertions(+), 951 deletions(-).
The main changes are:
1) Fix a memory leak when streaming AF_UNIX sockets were inserted
into multiple sockmap slots/maps, from John Fastabend.
2) Fix gotol in s390 BPF JIT with large offsets, from Ilya Leoshkevich.
3) Fix reattachment branch in bpf_tracing_prog_attach() and reject
the request if there is no valid attach_btf, from Jiri Olsa.
4) Remove deprecated bpfilter kernel leftovers given the project
is developed in user space (https://github.com/facebook/bpfilter),
from Quentin Deslandes.
5) Relax tracing BPF program recursive attach rules given right now
it is not possible to create tracing program call cycles,
from Dmitrii Dolgov.
6) Fix excessive memory consumption for the bpf_global_percpu_ma
for systems with a large number of CPUs, from Yonghong Song.
7) Small x86 BPF JIT cleanup to reuse emit_nops instead of open-coding
memcpy of x86_nops, from Leon Hwang.
8) Follow-up for libbpf to support __arg_ctx global function argument tag
semantics to complement the merged kernel side, from Andrii Nakryiko.
9) Introduce "volatile compare" macros for BPF selftests in order
to make the latter more robust against compiler optimization,
from Alexei Starovoitov.
10) Small simplification in verifier's size checking of helper accesses
along with additional selftests, from Andrei Matei.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (40 commits)
selftests/bpf: Test re-attachment fix for bpf_tracing_prog_attach
bpf: Fix re-attachment branch in bpf_tracing_prog_attach
selftests/bpf: Add test for recursive attachment of tracing progs
bpf: Relax tracing prog recursive attach rules
bpf, x86: Use emit_nops to replace memcpy x86_nops
selftests/bpf: Test gotol with large offsets
selftests/bpf: Double the size of test_loader log
s390/bpf: Fix gotol with large offsets
bpfilter: remove bpfilter
bpf: Remove unnecessary cpu == 0 check in memalloc
selftests/bpf: add __arg_ctx BTF rewrite test
selftests/bpf: add arg:ctx cases to test_global_funcs tests
libbpf: implement __arg_ctx fallback logic
libbpf: move BTF loading step after relocation step
libbpf: move exception callbacks assignment logic into relocation step
libbpf: use stable map placeholder FDs
libbpf: don't rely on map->fd as an indicator of map being created
libbpf: use explicit map reuse flag to skip map creation steps
libbpf: make uniform use of btf__fd() accessor inside libbpf
selftests/bpf: Add a selftest with > 512-byte percpu allocation size
...
====================
Link: https://lore.kernel.org/r/20240105170105.21070-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull misc mm fixes from Andrew Morton:
"12 hotfixes.
Two are cc:stable and the remainder either address post-6.7 issues or
aren't considered necessary for earlier kernel versions"
* tag 'mm-hotfixes-stable-2024-01-05-11-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: shrinker: use kvzalloc_node() from expand_one_shrinker_info()
mailmap: add entries for Mathieu Othacehe
MAINTAINERS: change vmware.com addresses to broadcom.com
arch/mm/fault: fix major fault accounting when retrying under per-VMA lock
mm/mglru: skip special VMAs in lru_gen_look_around()
MAINTAINERS: hand over hwpoison maintainership to Miaohe Lin
MAINTAINERS: remove hugetlb maintainer Mike Kravetz
mm: fix unmap_mapping_range high bits shift bug
mm: memcg: fix split queue list crash when large folio migration
mm: fix arithmetic for max_prop_frac when setting max_ratio
mm: fix arithmetic for bdi min_ratio
mm: align larger anonymous mappings on THP boundaries
KVM/riscv changes for 6.8 part #1
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Steal time account support along with selftest
Pull misc fixes from Andrew Morton:
"11 hotfixes. 7 are cc:stable and the other 4 address post-6.6 issues
or are not considered backporting material"
* tag 'mm-hotfixes-stable-2023-12-27-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add an old address for Naoya Horiguchi
mm/memory-failure: cast index to loff_t before shifting it
mm/memory-failure: check the mapcount of the precise page
mm/memory-failure: pass the folio and the page to collect_procs()
selftests: secretmem: floor the memory size to the multiple of page_size
mm: migrate high-order folios in swap cache correctly
maple_tree: do not preallocate nodes for slot stores
mm/filemap: avoid buffered read/write race to read inconsistent data
kunit: kasan_test: disable fortify string checker on kmalloc_oob_memset
kexec: select CRYPTO from KEXEC_FILE instead of depending on it
kexec: fix KEXEC_FILE dependencies
We're trying to get sched.h down to more or less just types only, not
code - rseq can live in its own header.
This helps us kill the dependency on preempt.h in sched.h.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The length of the facility list accessed when interpretively executing
STFLE is the same as the hosts facility list (in case of format-0)
The memory following the facility list doesn't need to be accessible.
The current VSIE implementation accesses a fixed length that exceeds the
guest/host facility list length and can therefore wrongly inject a
validity intercept.
Instead, find out the host facility list length by running STFLE and
copy only as much as necessary when shadowing.
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20231219140854.1042599-3-nsg@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20231219140854.1042599-3-nsg@linux.ibm.com>
Only the posix timer system calls use this (when the posix timer support
is disabled, which does not actually happen in any normal case), because
they had debug code to print out a warning about missing system calls.
Get rid of that special case, and just use the standard COND_SYSCALL
interface that creates weak system call stubs that return -ENOSYS for
when the system call does not exist.
This fixes a kCFI issue with the SYS_NI() hackery:
CFI failure at int80_emulation+0x67/0xb0 (target: sys_ni_posix_timers+0x0/0x70; expected type: 0xb02b34d9)
WARNING: CPU: 0 PID: 48 at int80_emulation+0x67/0xb0
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull s390 fixes from Alexander Gordeev:
- Fix virtual vs physical address confusion in Storage Class Memory
(SCM) block device driver.
- Fix saving and restoring of FPU kernel context, which could lead to
corruption of vector registers 8-15
- Update defconfigs
* tag 's390-6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
s390/vx: fix save/restore of fpu kernel context
s390/scm: fix virtual vs physical address confusion
The cleanup for the CONFIG_KEXEC Kconfig logic accidentally changed the
'depends on CRYPTO=y' dependency to a plain 'depends on CRYPTO', which
causes a link failure when all the crypto support is in a loadable module
and kexec_file support is built-in:
x86_64-linux-ld: vmlinux.o: in function `__x64_sys_kexec_file_load':
(.text+0x32e30a): undefined reference to `crypto_alloc_shash'
x86_64-linux-ld: (.text+0x32e58e): undefined reference to `crypto_shash_update'
x86_64-linux-ld: (.text+0x32e6ee): undefined reference to `crypto_shash_final'
Both s390 and x86 have this problem, while ppc64 and riscv have the
correct dependency already. On riscv, the dependency is only used for the
purgatory, not for the kexec_file code itself, which may be a bit
surprising as it means that with CONFIG_CRYPTO=m, it is possible to enable
KEXEC_FILE but then the purgatory code is silently left out.
Move this into the common Kconfig.kexec file in a way that is correct
everywhere, using the dependency on CRYPTO_SHA256=y only when the
purgatory code is available. This requires reversing the dependency
between ARCH_SUPPORTS_KEXEC_PURGATORY and KEXEC_FILE, but the effect
remains the same, other than making riscv behave like the other ones.
On s390, there is an additional dependency on CRYPTO_SHA256_S390, which
should technically not be required but gives better performance. Remove
this dependency here, noting that it was not present in the initial
Kconfig code but was brought in without an explanation in commit
71406883fd ("s390/kexec_file: Add kexec_file_load system call").
[arnd@arndb.de: fix riscv build]
Link: https://lkml.kernel.org/r/67ddd260-d424-4229-a815-e3fcfb864a77@app.fastmail.com
Link: https://lkml.kernel.org/r/20231023110308.1202042-1-arnd@kernel.org
Fixes: 6af5138083 ("x86/kexec: refactor for kernel/Kconfig.kexec")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com>
Tested-by: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Conor Dooley <conor@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-12-18
This PR is larger than usual and contains changes in various parts
of the kernel.
The main changes are:
1) Fix kCFI bugs in BPF, from Peter Zijlstra.
End result: all forms of indirect calls from BPF into kernel
and from kernel into BPF work with CFI enabled. This allows BPF
to work with CONFIG_FINEIBT=y.
2) Introduce BPF token object, from Andrii Nakryiko.
It adds an ability to delegate a subset of BPF features from privileged
daemon (e.g., systemd) through special mount options for userns-bound
BPF FS to a trusted unprivileged application. The design accommodates
suggestions from Christian Brauner and Paul Moore.
Example:
$ sudo mkdir -p /sys/fs/bpf/token
$ sudo mount -t bpf bpffs /sys/fs/bpf/token \
-o delegate_cmds=prog_load:MAP_CREATE \
-o delegate_progs=kprobe \
-o delegate_attachs=xdp
3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei.
- Complete precision tracking support for register spills
- Fix verification of possibly-zero-sized stack accesses
- Fix access to uninit stack slots
- Track aligned STACK_ZERO cases as imprecise spilled registers.
It improves the verifier "instructions processed" metric from single
digit to 50-60% for some programs.
- Fix verifier retval logic
4) Support for VLAN tag in XDP hints, from Larysa Zaremba.
5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu.
End result: better memory utilization and lower I$ miss for calls to BPF
via BPF trampoline.
6) Fix race between BPF prog accessing inner map and parallel delete,
from Hou Tao.
7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu.
It allows BPF interact with IPSEC infra. The intent is to support
software RSS (via XDP) for the upcoming ipsec pcpu work.
Experiments on AWS demonstrate single tunnel pcpu ipsec reaching
line rate on 100G ENA nics.
8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao.
9) BPF file verification via fsverity, from Song Liu.
It allows BPF progs get fsverity digest.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits)
bpf: Ensure precise is reset to false in __mark_reg_const_zero()
selftests/bpf: Add more uprobe multi fail tests
bpf: Fail uprobe multi link with negative offset
selftests/bpf: Test the release of map btf
s390/bpf: Fix indirect trampoline generation
selftests/bpf: Temporarily disable dummy_struct_ops test on s390
x86/cfi,bpf: Fix bpf_exception_cb() signature
bpf: Fix dtor CFI
cfi: Add CFI_NOSEAL()
x86/cfi,bpf: Fix bpf_struct_ops CFI
x86/cfi,bpf: Fix bpf_callback_t CFI
x86/cfi,bpf: Fix BPF JIT call
cfi: Flip headers
selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment
selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test
selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment
bpf: Limit the number of kprobes when attaching program to multiple kprobes
bpf: Limit the number of uprobes when attaching program to multiple uprobes
bpf: xdp: Register generic_kfunc_set with XDP programs
selftests/bpf: utilize string values for delegate_xxx mount options
...
====================
Link: https://lore.kernel.org/r/20231219000520.34178-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
