Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
As explained in the previous patch, the MST link BW reported by branch
devices during topology probing/path resources enumeration depends on
the link parameters programmed to DPCD to be up-to-date. After a sink is
plugged this is not ensured, as those DPCD values start out zeroed. The
target link parameters (for a subsequent modeset) are the maximum that
is supported, so make sure these maximum values are programmed before the
topology probing.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-14-imre.deak@intel.com
The MST link BW reported by branch devices via the ENUM_PATH_RESOURCES
message depends on the channel coding and link rate/lane count
parameters programmed to DPCD. This is the case at least for some branch
devices, while for others the reported BW is independent of the link
parameters. In any case the DP standard requires the branch device to
adjust the returned value to both account for the different way the BW
for FEC is accounted for (included in the returned value for non-UHBR
and not included for UHBR rates) and to limit the returned value to the
(trained) link BW between the source and first downstream branch
device, see DP v2.0/v2.1 Figure 2-94, DP v2.1 5.9.7. Presumedly this is
also the reason why the standard requires the DPCD link rate/lane count
values being up-to-date before sending the ENUM_PATH_RESOURCES message,
see DP v2.1 2.14.9.4.
Based on the above reprobe the MST topology after the link is retrained
with new link parameters to make sure that the MST link BW tracked in
the MST topology state (via each topology port's full_pbn value) is
up-to-date.
The next patch will make sure that the MST link BW is also kept
up-to-date if the link is disabled.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-13-imre.deak@intel.com
On MST links - at least for some MST branch devices - the list of modes
returned to users on an enabled link depends on the current link
rate/lane count parameters (besides the DPRX link capabilities, any MST
branch BW limit and the maximum link parameters reduced after LT
failures). In particular the MST branch BW limit may depend on the link
rate/lane count parameters programmed to DPCD. After an LT failure and
limiting the maximum link parameters accordingly, users should see a
mode list reflecting these new limits. However with the current fallback
order this isn't ensured, as the new limit could allow for modes
requiring a higher link BW, but these modes will be filtered out due to
the enabled link's lower link BW.
Ensure that the mode list changes in a consistent way after a link
training failure and reducing the link parameters by changing the
fallback order on MST links to happen in BW order.
v2:
- s/INTEL_DP_MAX_SUPPORTED_LANE_COUNTS/INTEL_DP_MAX_SUPPORTED_LANE_CONFIGS
and s/num_common_lane_counts/num_common_lane_configs to make the
difference wrt. max lane counts clearer. (Suraj)
- Add a TODO comment to make the SST fallback logic work the same way as
MST. (Arun)
- Use sort_r()'s default swap function instead of a custom one.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240729144458.2763667-1-imre.deak@intel.com
There are multiple failure cases a modeset-retry uevent can be sent for
a link (TBT tunnel BW allocation failure, unrecoverable link training
failure), a follow-up patch adding the handling for a new case where the
DP MST payload allocation fails. The uevent is the same in all cases,
sent to all the connectors on the link, so in case of multiple failures
there is no point in sending a separate uevent for each failure; prevent
this, sending only a single modeset-retry uevent for a commit.
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-7-imre.deak@intel.com
Initialize the DP link parameters during HW readout. These need to be
up-to-date at least for the MST topology probing, which depends on the
link rate and lane count programmed in DPCD. A follow-up patch will
program the DPCD values to reflect the maximum link parameters before
the first MST topology probing, but should do so only if the link is
disabled (link_trained==false).
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-6-imre.deak@intel.com
In the
if (old_ddps != port->ddps || !created)
if (port->ddps && !port->input)
ret = drm_dp_send_enum_path_resources();
sequence the first if's condition is true if the port exists already
(!created) or the port was created anew (hence old_ddps==0) and it was
in the plugged state (port->ddps==1). The second if's condition is true
for output ports in the plugged state. So the function is called for an
output port in the plugged state, regardless if it already existed or
not and regardless of the old plugged state. In all other cases
port->full_pbn can be zeroed as the port is either an input for which
full_pbn is never set, or an output in the unplugged state for which
full_pbn was already zeroed previously or the port was just created
(with port->full_pbn==0).
Simplify the condition, making it clear that the path resources are
always enumerated for an output port in the plugged state.
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-4-imre.deak@intel.com
On the off chance that clock value ends up being too high (by means
of skl_ddi_calculate_wrpll() having been called with big enough
value of crtc_state->port_clock * 1000), one possible consequence
may be that the result will not be able to fit into signed int.
Fix this issue by moving conversion of clock parameter from kHz to Hz
into the body of skl_ddi_calculate_wrpll(), as well as casting the
same parameter to u64 type while calculating the value for AFE clock.
This both mitigates the overflow problem and avoids possible erroneous
integer promotion mishaps.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 82d3543701 ("drm/i915/skl: Implementation of SKL DPLL programming")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240729174035.25727-1-n.zhandarovich@fintech.ru
Commit 3a7e02c040 ("minmax: avoid overly complicated constant
expressions in VM code") added the simpler MIN_T/MAX_T macros in order
to avoid some excessive expansion from the rather complicated regular
min/max macros.
The complexity of those macros stems from two issues:
(a) trying to use them in situations that require a C constant
expression (in static initializers and for array sizes)
(b) the type sanity checking
and MIN_T/MAX_T avoids both of these issues.
Now, in the whole (long) discussion about all this, it was pointed out
that the whole type sanity checking is entirely unnecessary for
min_t/max_t which get a fixed type that the comparison is done in.
But that still leaves min_t/max_t unnecessarily complicated due to
worries about the C constant expression case.
However, it turns out that there really aren't very many cases that use
min_t/max_t for this, and we can just force-convert those.
This does exactly that.
Which in turn will then allow for much simpler implementations of
min_t()/max_t(). All the usual "macros in all upper case will evaluate
the arguments multiple times" rules apply.
We should do all the same things for the regular min/max() vs MIN/MAX()
cases, but that has the added complexity of various drivers defining
their own local versions of MIN/MAX, so that needs another level of
fixes first.
Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull drm fixes from Dave Airlie:
"Fixes for rc1, mostly amdgpu, i915 and xe, with some other misc ones,
doesn't seem to be anything too serious.
amdgpu:
- Bump driver version for GFX12 DCC
- DC documention warning fixes
- VCN unified queue power fix
- SMU fix
- RAS fix
- Display corruption fix
- SDMA 5.2 workaround
- GFX12 fixes
- Uninitialized variable fix
- VCN/JPEG 4.0.3 fixes
- Misc display fixes
- RAS fixes
- VCN4/5 harvest fix
- GPU reset fix
i915:
- Reset intel_dp->link_trained before retraining the link
- Don't switch the LTTPR mode on an active link
- Do not consider preemption during execlists_dequeue for gen8
- Allow NULL memory region
xe:
- xe_exec ioctl minor fix on sync entry cleanup upon error
- SRIOV: limit VF LMEM provisioning
- Wedge mode fixes
v3d:
- fix indirect dispatch on newer v3d revs
panel:
- fix panel backlight bindings"
* tag 'drm-next-2024-07-26' of https://gitlab.freedesktop.org/drm/kernel: (39 commits)
drm/amdgpu: reset vm state machine after gpu reset(vram lost)
drm/amdgpu: add missed harvest check for VCN IP v4/v5
drm/amdgpu: Fix eeprom max record count
drm/amdgpu: fix ras UE error injection failure issue
drm/amd/display: Remove ASSERT if significance is zero in math_ceil2
drm/amd/display: Check for NULL pointer
drm/amdgpu/vcn: Use offsets local to VCN/JPEG in VF
drm/amdgpu: Add empty HDP flush function to VCN v4.0.3
drm/amdgpu: Add empty HDP flush function to JPEG v4.0.3
drm/amd/amdgpu: Fix uninitialized variable warnings
drm/amdgpu: Fix atomics on GFX12
drm/amdgpu/sdma5.2: Update wptr registers as well as doorbell
drm/i915: Allow NULL memory region
drm/i915/gt: Do not consider preemption during execlists_dequeue for gen8
dt-bindings: display: panel: samsung,atna33xc20: Document ATNA45AF01
drm/xe: Don't suspend device upon wedge
drm/xe: Wedge the entire device
drm/xe/pf: Limit fair VF LMEM provisioning
drm/xe/exec: Fix minor bug related to xe_sync_entry_cleanup
drm/amd/display: fix corruption with high refresh rates on DCN 3.0
...
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
Clear VSC SDP if intel_dp_set_infoframes is called from post ddi disable
routine i.e with the variable of enable as false. This is to avoid
an infoframes.enable mismatch issue which is caused when pipe is
connected to eDp which has psr then connected to DPMST. In this case
eDp's post ddi disable routine does not clear infoframes.enable VSC
for the given pipe and DPMST does not recompute VSC SDP and write
infoframes.enable which causes a mismatch.
--v2
-Make the comment match the code [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240724163743.3668407-1-suraj.kandpal@intel.com
[Why]
Page table of compute VM in the VRAM will lost after gpu reset.
VRAM won't be restored since compute VM has no shadows.
[How]
Use higher 32-bit of vm->generation to record a vram_lost_counter.
Reset the VM state machine when vm->genertaion is not equal to
the new generation token.
v2: Check vm->generation instead of calling drm_sched_entity_error
in amdgpu_vm_validate.
v3: Use new generation token instead of vram_lost_counter for check.
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
(cherry picked from commit 47c0388b05)
The eeprom table is empty before initializing,
set eeprom table version first before initializing.
Changed from V1:
Reuse amdgpu_ras_set_eeprom_table_version function
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 015b8a2fdf)
The ras command shared memory is allocated from
VRAM and the response status of the command
buffer will not be zero due to gpu being in
fatal error state after ras UE error injection.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8284951a6e)
In the DML math_ceil2 function, there is one ASSERT if the significance
is equal to zero. However, significance might be equal to zero
sometimes, and this is not an issue for a ceil function, but the current
ASSERT will trigger warnings in those cases. This commit removes the
ASSERT if the significance is equal to zero to avoid unnecessary noise.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 332315885d)
