Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPH64g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynr2QCfd3RKeR+WnGzyEOFhksl30UJJhiIAoNZtYT5+
t9KG0iMDXRuTsOqeEQbd
=tVnk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
nvmem: core: Notify when a new layout is registered
nvmem: core: Do not open-code existing functions
nvmem: core: Return NULL when no nvmem layout is found
nvmem: core: Create all cells before adding the nvmem device
nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
dt-bindings: nvmem: Add compatible for QCM2290
nvmem: Kconfig: Fix typo "drive" -> "driver"
nvmem: Explicitly include correct DT includes
nvmem: add new NXP QorIQ eFuse driver
dt-bindings: nvmem: Add t1023-sfp efuse support
dt-bindings: nvmem: qfprom: Add compatible for MSM8226
nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
nvmem: qfprom: do some cleanup
nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
...
Here is the big set of tty and serial driver changes for 6.6-rc1.
Lots of cleanups in here this cycle, and some driver updates. Short
summary is:
- Jiri's continued work to make the tty code and apis be a bit more
sane with regards to modern kernel coding style and types
- cpm_uart driver updates
- n_gsm updates and fixes
- meson driver updates
- sc16is7xx driver updates
- 8250 driver updates for different hardware types
- qcom-geni driver fixes
- tegra serial driver change
- stm32 driver updates
- synclink_gt driver cleanups
- tty structure size reduction
All of these have been in linux-next this week with no reported issues.
The last bit of cleanups from Jiri and the tty structure size reduction
came in last week, a bit late but as they were just style changes and
size reductions, I figured they should get into this merge cycle so that
others can work on top of them with no merge conflicts.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZPH+jA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykKyACgldt6QeenTN+6dXIHS/eQHtTKZwMAn3arSeXI
QrUUnLFjOWyoX87tbMBQ
=LVw0
-----END PGP SIGNATURE-----
Merge tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty and serial driver changes for 6.6-rc1.
Lots of cleanups in here this cycle, and some driver updates. Short
summary is:
- Jiri's continued work to make the tty code and apis be a bit more
sane with regards to modern kernel coding style and types
- cpm_uart driver updates
- n_gsm updates and fixes
- meson driver updates
- sc16is7xx driver updates
- 8250 driver updates for different hardware types
- qcom-geni driver fixes
- tegra serial driver change
- stm32 driver updates
- synclink_gt driver cleanups
- tty structure size reduction
All of these have been in linux-next this week with no reported
issues. The last bit of cleanups from Jiri and the tty structure size
reduction came in last week, a bit late but as they were just style
changes and size reductions, I figured they should get into this merge
cycle so that others can work on top of them with no merge conflicts"
* tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
tty: shrink the size of struct tty_struct by 40 bytes
tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw()
tty: n_tty: extract ECHO_OP processing to a separate function
tty: n_tty: unify counts to size_t
tty: n_tty: use u8 for chars and flags
tty: n_tty: simplify chars_in_buffer()
tty: n_tty: remove unsigned char casts from character constants
tty: n_tty: move newline handling to a separate function
tty: n_tty: move canon handling to a separate function
tty: n_tty: use MASK() for masking out size bits
tty: n_tty: make n_tty_data::num_overrun unsigned
tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun()
tty: n_tty: use 'num' for writes' counts
tty: n_tty: use output character directly
tty: n_tty: make flow of n_tty_receive_buf_common() a bool
Revert "tty: serial: meson: Add a earlycon for the T7 SoC"
Documentation: devices.txt: Fix minors for ttyCPM*
Documentation: devices.txt: Remove ttySIOC*
Documentation: devices.txt: Remove ttyIOC*
serial: 8250_bcm7271: improve bcm7271 8250 port
...
No core changes this time.
Drivers:
- Intel Tangier SoC pin control support.
- AMLogic C3 SoC pin control support.
- Texas Instruments AM654 SoC pin control support.
- Qualcomm SM8350 and SM6115 LPASS (Low Power Audio Sub-System)
pin control support.
- Qualcomm PMX75 and PM7550BA (Power Management) pin control
support.
- Qualcomm PMC8180 and PMC8180C (Power Management) pin control
support.
- DROP the Oxnas driver as there is not enough of community
interest to keep carrying this ARM(11) port.
Enhancements:
- Bias control in the MT7986 pin control driver.
- Misc device tree binding enhancements such as the Broadcom
11351 being converted to YAML.
- New macro: DEFINE_NOIRQ_DEV_PM_OPS() put to use.
- Clean up some SPDX headers.
- Handle non-unique devicetree subnode names in two Renesas
drivers.
-----BEGIN PGP SIGNATURE-----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=AMCy
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"We have some patches to DTS[I] files in arm and arm64 as well, that
were merged here as DT headers were being changed.
The most interesting stuff is the Intel Tangier chip support and
AMLogic C3 in my opinion.
No core changes this time.
Drivers:
- Intel Tangier SoC pin control support
- AMLogic C3 SoC pin control support
- Texas Instruments AM654 SoC pin control support
- Qualcomm SM8350 and SM6115 LPASS (Low Power Audio Sub-System) pin
control support
- Qualcomm PMX75 and PM7550BA (Power Management) pin control support
- Qualcomm PMC8180 and PMC8180C (Power Management) pin control
support
- DROP the Oxnas driver as there is not enough of community interest
to keep carrying this ARM(11) port
Enhancements:
- Bias control in the MT7986 pin control driver
- Misc device tree binding enhancements such as the Broadcom 11351
being converted to YAML
- New macro: DEFINE_NOIRQ_DEV_PM_OPS() put to use
- Clean up some SPDX headers
- Handle non-unique devicetree subnode names in two Renesas drivers"
* tag 'pinctrl-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
pinctrl: mlxbf3: Remove gpio_disable_free()
pinctrl: use capital "OR" for multiple licenses in SPDX
dt-bindings: pinctrl: renesas,rza2: Use 'additionalProperties' for child nodes
pinctrl: cherryview: fix address_space_handler() argument
pinctrl: intel: consolidate ACPI dependency
pinctrl: tegra: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: renesas: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: mvebu: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: at91: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: cherryview: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pm: Introduce DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: mediatek: assign functions to configure pin bias on MT7986
pinctrl: mediatek: fix pull_type data for MT7981
dt-bindings: pinctrl: aspeed: Allow only defined pin mux node properties
dt-bindings: pinctrl: Drop 'phandle' properties
pinctrl: lynxpoint: Make use of pm_ptr()
pinctrl: baytrail: Make use of pm_ptr()
pinctrl: intel: Switch to use exported namespace
pinctrl: lynxpoint: reuse common functions from pinctrl-intel
pinctrl: cherryview: reuse common functions from pinctrl-intel
...
These are the devicetree updates for Arm and RISC-V based SoCs,
mainly from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips,
Samsung, ST and Starfive.
Only a few new SoC got added:
- TI AM62P5, a variant of the existing Sitara AM62x family
- Intel Agilex5, an FPGFA platform that includes an
Cortex-A76/A55 SoC.
- Qualcomm ipq5018 is used in wireless access points
- Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile
phone platform.
In total, 29 machines get added, which is low because of the summer
break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST,
Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of
these are development and reference boards.
Despite not adding a lot of new machines, there are over 700 patches in
total, most of which are cleanups and minor fixes.
-----BEGIN PGP SIGNATURE-----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=bO3j
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"These are the devicetree updates for Arm and RISC-V based SoCs, mainly
from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips, Samsung, ST and
Starfive.
Only a few new SoC got added:
- TI AM62P5, a variant of the existing Sitara AM62x family
- Intel Agilex5, an FPGFA platform that includes an Cortex-A76/A55
SoC.
- Qualcomm ipq5018 is used in wireless access points
- Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile phone
platform.
In total, 29 machines get added, which is low because of the summer
break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST,
Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of
these are development and reference boards.
Despite not adding a lot of new machines, there are over 700 patches
in total, most of which are cleanups and minor fixes"
* tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (735 commits)
arm64: dts: use capital "OR" for multiple licenses in SPDX
ARM: dts: use capital "OR" for multiple licenses in SPDX
arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
ARM: dts: qcom: apq8064: add support to gsbi4 uart
riscv: dts: change TH1520 files to dual license
riscv: dts: thead: add BeagleV Ahead board device tree
dt-bindings: riscv: Add BeagleV Ahead board compatibles
ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
ARM: dts: stm32: support display on stm32f746-disco board
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
ARM: dts: stm32: add pin map for LTDC on stm32f7
ARM: dts: stm32: add ltdc support on stm32f746 MCU
arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Add PDC
riscv: dts: starfive: fix jh7110 qspi sort order
...
Initial support for the SM4450 platform and the QRD device thereon is
added.
The IPQ5018 platform is introduced, and the RDP432-C2 board thereon.
A shared definition of the IPQ5332 RDP is introduced, as is GPIO-based
LEDs and buttons.
On the IPQ9574 RDP433 USB, CPU cooling maps and regulators are added.
On MSM8916, the D3 camera mezzanine is improved and refactored out to
its own dts. The Samsung Galaxy S4 Mini gains support for its PMIC with
charger, while Samsung Galaxy J5 and E5 gains touchscreen support.
A few fixes for MSM8939 are introduced, and initial support for Samsung
Galaxy A7 is add.
Support for scaling the cache bus fabric is introduced on MSM8996. A
missing interrupt for the USB2 controller is added. The touchscreen vio
supply on Xiaomi Mi 5 is corrected, and a few other cleanups are
introduces across other devices.
The display controller is introduced for MSM8998, a few clock fixes are
introduced and missing power domains are added for the multimedia
subsystem iommu.
Reserved memory-regions and reserved GPIO lists are updated for the
QDU/QRU1000 IDPs.
USB3 PHY is added to the QCM2290, the RB1 gains regulators and GPU is
enabled for the RB2.
PCIe and Ethernet support is introduced on SA8775P, and enabled for the
Ride board.
On SC7180 the PSCI integration is refactored, to allow supporting
devices with the Qualcomm firmware. BWMON is introduced, alongside the
CPUfreq-based bus voting.
A number of fixes are added for SC8180X, on the Primus and Lenovo Flex
5G devices pmic_glink is introduced and wired up, to provide support for
external display.
Missing SCM interconnect is added to SC8280XP, and the PDC is marked as
wakeup-parent of TLMM. On the CRD the gpio for vreg_misc_3p3 is
corrected and a few regulators are renamed to align with schematics. The
Lenovo Thinkpad X13s gains camera activity LED and a set of previously
reserved GPIOs are released. The SA8540P Ride platform gains RTC
support.
For SDM670 CPU and L3 frequency scaling is added, the PDC is introduced
and wired up as wakeup-parent of the TLMM.
On SDM845 the UFS controller gains interconnect path description,
power-domain information is added to GCC and minimum frequency of the
UFS ICE is corrected. On RB3 continuous splash memory region is
described, and the camera subsystem is enabled. On the Lenovo Yoga C630
a missing power supply for the display panel is added, and the debug
UART is introduced.
SDX75 RPMh power-domains and SPMI controller are introduces, the PMX75
PMIC is described and added to the IDP.
GPU description is added to SM6115, and together with display enabled on
the Lenovo Tab P11.
On SM635 BWMON is introduced for LLCC and DDR scaling. Display and GPU
is added, and the PDC is registered as wakeup-parent of TLMM.
L3 cache scaling is introduced on SM6375.
The DSI PHY compatible and an interrupt for I2C7 are corrected for
SM8150, on the Sony Xperia 1 and 5 the ramoops pmsg size is corrected.
On SM8250 BWMONs are introduced for DDR and LLCC scaling, the UFS node
gains interconnect paths, SMMU is marked as DMA coherent and dynamic
power coefficients are updated. On Sony Xperia 1 II and 5 II GPIO line
names are updated.
On SM8350 missing cluster sleep states and LMH interrupts are added,
the CPU compatibles are corrected and APR and LPASS pinctrl support is
introduced. The HDK gains uSD card support and PMK8350 is added.
For SM8450 support for RNG and RPMh stats are added, the ICE handling is
extracted from the UFS node and the display subsystem gains a missing
interconnect path. Thermal description is improved for the HDK.
On SM8550 MTP and QRD the pmic_glink is introduced, to provide
DisplayPort output. A missing regulator supply is also added.
A few platforms that happens to share the RPMH power-domain resource
identifier constants are migrated to new generic defines. ADC channel
names are generalized on various PMICs.
A variety of devices gain chassis-type, and the GIC_SPI constant is
replacing the 0 across a few different platforms.
-----BEGIN PGP SIGNATURE-----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=uK0C
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=zUL1
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 DeviceTree updates for v6.6
Initial support for the SM4450 platform and the QRD device thereon is
added.
The IPQ5018 platform is introduced, and the RDP432-C2 board thereon.
A shared definition of the IPQ5332 RDP is introduced, as is GPIO-based
LEDs and buttons.
On the IPQ9574 RDP433 USB, CPU cooling maps and regulators are added.
On MSM8916, the D3 camera mezzanine is improved and refactored out to
its own dts. The Samsung Galaxy S4 Mini gains support for its PMIC with
charger, while Samsung Galaxy J5 and E5 gains touchscreen support.
A few fixes for MSM8939 are introduced, and initial support for Samsung
Galaxy A7 is add.
Support for scaling the cache bus fabric is introduced on MSM8996. A
missing interrupt for the USB2 controller is added. The touchscreen vio
supply on Xiaomi Mi 5 is corrected, and a few other cleanups are
introduces across other devices.
The display controller is introduced for MSM8998, a few clock fixes are
introduced and missing power domains are added for the multimedia
subsystem iommu.
Reserved memory-regions and reserved GPIO lists are updated for the
QDU/QRU1000 IDPs.
USB3 PHY is added to the QCM2290, the RB1 gains regulators and GPU is
enabled for the RB2.
PCIe and Ethernet support is introduced on SA8775P, and enabled for the
Ride board.
On SC7180 the PSCI integration is refactored, to allow supporting
devices with the Qualcomm firmware. BWMON is introduced, alongside the
CPUfreq-based bus voting.
A number of fixes are added for SC8180X, on the Primus and Lenovo Flex
5G devices pmic_glink is introduced and wired up, to provide support for
external display.
Missing SCM interconnect is added to SC8280XP, and the PDC is marked as
wakeup-parent of TLMM. On the CRD the gpio for vreg_misc_3p3 is
corrected and a few regulators are renamed to align with schematics. The
Lenovo Thinkpad X13s gains camera activity LED and a set of previously
reserved GPIOs are released. The SA8540P Ride platform gains RTC
support.
For SDM670 CPU and L3 frequency scaling is added, the PDC is introduced
and wired up as wakeup-parent of the TLMM.
On SDM845 the UFS controller gains interconnect path description,
power-domain information is added to GCC and minimum frequency of the
UFS ICE is corrected. On RB3 continuous splash memory region is
described, and the camera subsystem is enabled. On the Lenovo Yoga C630
a missing power supply for the display panel is added, and the debug
UART is introduced.
SDX75 RPMh power-domains and SPMI controller are introduces, the PMX75
PMIC is described and added to the IDP.
GPU description is added to SM6115, and together with display enabled on
the Lenovo Tab P11.
On SM635 BWMON is introduced for LLCC and DDR scaling. Display and GPU
is added, and the PDC is registered as wakeup-parent of TLMM.
L3 cache scaling is introduced on SM6375.
The DSI PHY compatible and an interrupt for I2C7 are corrected for
SM8150, on the Sony Xperia 1 and 5 the ramoops pmsg size is corrected.
On SM8250 BWMONs are introduced for DDR and LLCC scaling, the UFS node
gains interconnect paths, SMMU is marked as DMA coherent and dynamic
power coefficients are updated. On Sony Xperia 1 II and 5 II GPIO line
names are updated.
On SM8350 missing cluster sleep states and LMH interrupts are added,
the CPU compatibles are corrected and APR and LPASS pinctrl support is
introduced. The HDK gains uSD card support and PMK8350 is added.
For SM8450 support for RNG and RPMh stats are added, the ICE handling is
extracted from the UFS node and the display subsystem gains a missing
interconnect path. Thermal description is improved for the HDK.
On SM8550 MTP and QRD the pmic_glink is introduced, to provide
DisplayPort output. A missing regulator supply is also added.
A few platforms that happens to share the RPMH power-domain resource
identifier constants are migrated to new generic defines. ADC channel
names are generalized on various PMICs.
A variety of devices gain chassis-type, and the GIC_SPI constant is
replacing the 0 across a few different platforms.
* tag 'qcom-arm64-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (215 commits)
arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM
arm64: dts: qcom: sdm670: Add PDC
arm64: dts: qcom: msm8916-samsung-e5: Add touchscreen
arm64: dts: qcom: sc7180: Split up TF-A related PSCI configuration
arm64: dts: qcom: sc8280xp-x13s: Add camera activity LED
arm64: dts: qcom: sc8280xp-x13s: Unreserve NC pins
arm64: dts: qcom: msm8998: Add DPU1 nodes
arm64: dts: qcom: msm8996: Fix dsi1 interrupts
arm64: dts: qcom: sdx75-idp: Add regulator nodes
arm64: dts: qcom: sdx75: Add rpmhpd node
arm64: dts: qcom: sdx75-idp: Add pmics supported in SDX75
arm64: dts: qcom: Add pmx75 PMIC dtsi
arm64: dts: qcom: Add pm7550ba PMIC dtsi
arm64: dts: qcom: Add pinctrl gpio support for pm7250b
arm64: dts: qcom: sdx75: Add spmi node
arm64: dts: qcom: msm8998: Add missing power domain to MMSS SMMU
...
Link: https://lore.kernel.org/r/20230819034551.2537866-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Many new peripherals for the still only basic supported rk3588 soc
(PCIe2, PCIe3, USB2, SATA, Combo-Phys).
Improvements to the Rock-5a development board based on this soc (saradc,
i2c on dsi and csi, fan, eeprom, analog audio, leds, sd-card,
some regulators, pmic).
Improvements for the edgeble-neu6b (rs485, rs232, pwm-fan, rtc, sata,
sata, sd-card, pmic)
RK3399 got the PCIe endpoint node when used as a PCIe-client.
And some minor changes for some boards: spi-flash for RockPi 4,
SATA and fixed PCIe regulators for Radxa E25 and using enable-gpios
on engicam and gru boards.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmTdRnwQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgcffB/4sR8h7IBNMN/0yUyn1ALlAZWt6K9mNQbIq
0mRMJHllMeefLL952Gsnpw3uj6mz/GKIa0H0g88giWMJOOknH/zIKyYE/9Li0WwO
KFoF2KA76JQlN+Dv7qHfhv38Q996/AI6Bc1dGcU1x611/jZlbZojXqnBKvT4RyFJ
rbRvD6nF8LeW6yQP1u+4wA2UnHonYJstU6bEbAf1KXofQIzcspDBzKHuQtza152F
3YVR5+yCIG4zFVSksvX5+DkJvvYYP/dkLftrh69dgYNHDcXonHYLNkR9E05kWL+/
xhH58h20b/tBonJoh2ZSNKdZSvv2w8BdCQP/SGn54YQ+8nclsnFI
=g1qK
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=XITG
-----END PGP SIGNATURE-----
Merge tag 'v6.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards are the NanoPC T6, Firefly Station P2, Radxa Rock 4SE.
Many new peripherals for the still only basic supported rk3588 soc
(PCIe2, PCIe3, USB2, SATA, Combo-Phys).
Improvements to the Rock-5a development board based on this soc (saradc,
i2c on dsi and csi, fan, eeprom, analog audio, leds, sd-card,
some regulators, pmic).
Improvements for the edgeble-neu6b (rs485, rs232, pwm-fan, rtc, sata,
sata, sd-card, pmic)
RK3399 got the PCIe endpoint node when used as a PCIe-client.
And some minor changes for some boards: spi-flash for RockPi 4,
SATA and fixed PCIe regulators for Radxa E25 and using enable-gpios
on engicam and gru boards.
* tag 'v6.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (46 commits)
arm64: dts: rockchip: Add NanoPC T6 PCIe Ethernet support
arm64: dts: rockchip: add rk3588 PCIe2 support
arm64: dts: rockchip: Enable internal SPI flash for ROCK Pi 4A/B/C
arm64: dts: rockchip: Add NanoPC T6
dt-bindings: arm: rockchip: Add NanoPC T6
arm64: dts: rockchip: Enable SATA on Radxa E25
arm64: dts: rockchip: Fix PCIe regulators on Radxa E25
arm64: dts: rockchip: switch px30-engicam to enable-gpios
arm64: dts: rockchip: switch rk3399-gru boards to enable-gpios
arm64: dts: rockchip: add PCIe3 support for rk3588
arm64: dts: rockchip: fix/update sdmmc properties for rock-5a and -5b
arm64: dts: rockchip: add USB2 to rk3588s-rock5a
arm64: dts: rockchip: add USB2 to rk3588-rock5b
arm64: dts: rockchip: add USB2 to rk3588-evb1
arm64: dts: rockchip: add USB2 support for rk3588
arm64: dts: rockchip: Enable RS485 for edgeble-neu6b
arm64: dts: rockchip: Enable RS232 for edgeble-neu6b
arm64: dts: rockchip: Enable PWM FAN for edgeble-neu6b
arm64: dts: rockchip: Enable RTC for edgeble-neu6b
arm64: dts: rockchip: Enable SATA for edgeble-neu6b
...
Link: https://lore.kernel.org/r/7414564.rnE6jSC6OK@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Adding a reserved memory region for the framebuffer memory
(the splash memory region set up by the bootloader).
It fixes a kernel panic (arm-smmu: Unhandled context fault
at this particular memory region) reported on DB845c running
v5.10.y.
Cc: stable@vger.kernel.org # v5.10+
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230726132719.2117369-2-amit.pundir@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This corrects the invalid path specifier for L3 interconnects in the CPU
nodes of SM8150 and SM8250. It corrects the compatible of the SC8180X L3
node, to pass the binding check.
The crypto core, and its DMA controller, is disabled on SM8350 to avoid
the system from crashing at boot while the issue is diagnosed.
A thermal zone node name conflict is resolved for PM8150L, on the RB5
board.
The UFS vccq voltage is corrected on the SA877P Ride platform, to
address observed stability issues.
The reg-names of the DSI phy on SC7180 are restored after an accidental
search-and-replace update.
-----BEGIN PGP SIGNATURE-----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=ZesT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=VxVu
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 fixes for v6.5
This corrects the invalid path specifier for L3 interconnects in the CPU
nodes of SM8150 and SM8250. It corrects the compatible of the SC8180X L3
node, to pass the binding check.
The crypto core, and its DMA controller, is disabled on SM8350 to avoid
the system from crashing at boot while the issue is diagnosed.
A thermal zone node name conflict is resolved for PM8150L, on the RB5
board.
The UFS vccq voltage is corrected on the SA877P Ride platform, to
address observed stability issues.
The reg-names of the DSI phy on SC7180 are restored after an accidental
search-and-replace update.
* tag 'qcom-arm64-fixes-for-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sc7180: Fix DSI0_PHY reg-names
arm64: dts: qcom: sa8775p-ride: Update L4C parameters
arm64: dts: qcom: qrb5165-rb5: fix thermal zone conflict
arm64: dts: qcom: sm8350: fix BAM DMA crash and reboot
arm64: dts: qcom: sc8180x: Fix OSM L3 compatible
arm64: dts: qcom: sm8250: Fix EPSS L3 interconnect cells
arm64: dts: qcom: sm8150: Fix OSM L3 interconnect cells
Link: https://lore.kernel.org/r/20230815142042.2459048-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
disabled hs400 speeds for some boards having problems with data
intergrity and some dt property/styling fixes.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmTdQagQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdga3AB/sFuePDO2RZcM4YAf5IB/Ct5nFgdaVEOvNk
UxB60rD7nsVuTblc3FT9K6TRgGJfX3VKylDUWoSHlkbjoof0Hu8GJ/5dhiNM5dxc
GRwTzobweVez3d6CWI78EMbEBa/phHSEFdEy5Dk0npolt91tBzOn1BqZTi3/CLY3
56cPcBArLqlEWE7ExhNXHbrJ+WCblgjulabVm9aYjSeU8iOHHxnq+Z82M+DDIP2Q
3I2rsyFqgHYOAsYaBGOyVnEzJiEVEOp/1+4bvlawmWLRj1s48bjn7aWUBaawLd1c
NMcPRWFRKEDqyP28wxL45Kr8mWZ/97lQ4DY/MsyKtJFF7zj9CPIM
=gBGI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=yaB5
-----END PGP SIGNATURE-----
Merge tag 'v6.5-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Correct wifi interrupt flags for some boards, fixed wifi on Rock PI4,
disabled hs400 speeds for some boards having problems with data
intergrity and some dt property/styling fixes.
* tag 'v6.5-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix Wifi/Bluetooth on ROCK Pi 4 boards
arm64: dts: rockchip: minor whitespace cleanup around '='
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4
arm64: dts: rockchip: add missing space before { on indiedroid nova
arm64: dts: rockchip: correct wifi interrupt flag in Box Demo
arm64: dts: rockchip: correct wifi interrupt flag in Rock Pi 4B
arm64: dts: rockchip: correct wifi interrupt flag in eaidk-610
arm64: dts: rockchip: Drop invalid regulator-init-microvolt property
Link: https://lore.kernel.org/r/4519945.8hzESeGDPO@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New Boards:
- TQ group's TQMaX4XxL AM64 SOM and MBaX4XxL carrier board
- TI's AM62P5 Starter Kit (SK)
New features:
AM625:
- Support for Display (parallel only) - hdmi+audio support for
AM625-SK/BeaglePlay, TC358778 DPI to MIPI-DSI bridge support
for verdin.
- MCU MCAN support and enable of Toradex Verdin
- Toradex Verdin Dahlia audio support
AM62A7:
- MCU MCAN support
- Enable USB Dual Role Device(DRD) support for AM62A7
Starter Kit(SK).
AM64:
- TQ group's tqma64xxl: Overlays for SD-card and wlan.
J721E:
- Main domain CPSW9G and correponding gateway/ethernet
switch expansion - GESI board.
J721S2/AM68:
- New CAN instances, ehrpwm, Display (DSS) and am68-sk HDMI support
- Main domain CPSW2G and correponding gateway/ethernet
switch expansion - GESI board.
J784S4/AM69:
- Boot phase tag marking in device tree
- UFS support
Cleanups and non-urgent fixes:
- Cosmetic style fixups around "=" and "{" whitespace usage.
- Fixups across multiple SoCs/boards for pwm-tbclk to matchup with
bindings
- Serdes header file include/dt-bindings/mux/ti-serdes.h is now
deprecated, use k3-serdes.h in soc dtsi folder.
- All SoCs: Enable GPIO/SDHCI/OSPI/TSADC/C6/C7 DSP nodes at the
board level.
- Fixups for AM62: Crypto powerdomains are conditional to better
represent control of the crypto engines by security controller.
- Fixups for j721e: Duplicate wakeup_i2c node dropped for SoM board.
- Fixups for j721s2/am68: pimux offsets for OSPI.
- Fixups for j784s4/am69: Fixups for pinmux for ospi/adc interrupt
ranges for wkup/main gpios
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE+KKGk1TrgjIXoxo03bWEnRc2JJ0FAmTaSUYACgkQ3bWEnRc2
JJ2ItQ/+KX09s67fsGuQn6G2lqoLujlPSKbQn3ygFJt/Oeo+cchqcpPg7PKsdHDq
2vpC1crLE3aYfqFqFj0LJvG6KNf1cWmNFLXyE0Ek4h4o73vq0EjXybAUrc/cme8l
TZ/1o938idoM9HvA1zz71KLA6cI5qbYzHHAjVq4Gp0bLiynsLLLY7mGgo4HC45Ii
67EEWiNvNNfY9QpMNEJB2VCZ1xto83nwUgimEdJZ7pStfUtjB+r1lDfJgZg0v5Ay
QOiTQyAtTbpBuYL53jRjiF64VAnDTN//uv1/mdfnJ82ltfdZJ79FI0xGUqVusD9t
lHPdPicGNgtUyIFJsvNJMRQKtrVpV57C2e5ECHMzWNWyIMOylbz9Zc7eGrgB41fi
qS8QkkJ2+MUd/I3HSuAWoSFIfjmq7Z0dsHyOFntZrSypEai217S+rJgZ/kmdorz5
TQzqSacXjmxM4yNjJCamLQEK5KEib6Gtq4gLZMPvoc1kvnSHv6lY34/lm9mJBxZx
+L1qONX0km5rTjaRm0TvqUR19WoFl5fWIyempidRf2TCVeH98Je5AdQgftM7Pk9M
1Rwxob76+Tq7oL4H5/eqX+ye+k/k1wqoxEBsOLEju65/aSVxYqEiPb+kr99BaV7n
pIBtDkiV7KfsrgxwjAlr+JPIY4v6We9+W6dE4HyCF4HOrmk+I+I=
=Ifxz
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=namZ
-----END PGP SIGNATURE-----
Merge tag 'ti-k3-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.6
New Boards:
- TQ group's TQMaX4XxL AM64 SOM and MBaX4XxL carrier board
- TI's AM62P5 Starter Kit (SK)
New features:
AM625:
- Support for Display (parallel only) - hdmi+audio support for
AM625-SK/BeaglePlay, TC358778 DPI to MIPI-DSI bridge support
for verdin.
- MCU MCAN support and enable of Toradex Verdin
- Toradex Verdin Dahlia audio support
AM62A7:
- MCU MCAN support
- Enable USB Dual Role Device(DRD) support for AM62A7
Starter Kit(SK).
AM64:
- TQ group's tqma64xxl: Overlays for SD-card and wlan.
J721E:
- Main domain CPSW9G and correponding gateway/ethernet
switch expansion - GESI board.
J721S2/AM68:
- New CAN instances, ehrpwm, Display (DSS) and am68-sk HDMI support
- Main domain CPSW2G and correponding gateway/ethernet
switch expansion - GESI board.
J784S4/AM69:
- Boot phase tag marking in device tree
- UFS support
Cleanups and non-urgent fixes:
- Cosmetic style fixups around "=" and "{" whitespace usage.
- Fixups across multiple SoCs/boards for pwm-tbclk to matchup with
bindings
- Serdes header file include/dt-bindings/mux/ti-serdes.h is now
deprecated, use k3-serdes.h in soc dtsi folder.
- All SoCs: Enable GPIO/SDHCI/OSPI/TSADC/C6/C7 DSP nodes at the
board level.
- Fixups for AM62: Crypto powerdomains are conditional to better
represent control of the crypto engines by security controller.
- Fixups for j721e: Duplicate wakeup_i2c node dropped for SoM board.
- Fixups for j721s2/am68: pimux offsets for OSPI.
- Fixups for j784s4/am69: Fixups for pinmux for ospi/adc interrupt
ranges for wkup/main gpios
* tag 'ti-k3-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (68 commits)
arm64: dts: ti: verdin-am62: Add DSI display support
arm64: dts: ti: Add support for the AM62P5 Starter Kit
arm64: dts: ti: Introduce AM62P5 family of SoCs
dt-bindings: arm: ti: Add bindings for AM62P5 SoCs
arm64: dts: ti: k3-am69-sk: Add phase tags marking
arm64: dts: ti: k3-j784s4-evm: Add phase tags marking
arm64: dts: ti: k3-j784s4: Add phase tags marking
arm64: dts: ti: k3-am625-beagleplay: Add HDMI support
arm64: dts: ti: am62x-sk: Add overlay for HDMI audio
arm64: dts: ti: k3-am62x-sk-common: Add HDMI support
arm64: dts: ti: k3-am62-main: Add node for DSS
arm64: dts: ti: k3-am62x-sk-common: Update main-i2c1 frequency
arm64: dts: ti: k3-j721e: Enable C6x DSP nodes at the board level
arm64: dts: ti: k3-j784s4: Enable C7x DSP nodes at the board level
arm64: dts: ti: k3-j721e: Enable C7x DSP nodes at the board level
arm64: dts: ti: k3-*: fix fss node dtbs check warnings
arm64: dts: ti: k3-am64: Enable TSCADC nodes at the board level
arm64: dts: ti: k3-am65: Enable TSCADC nodes at the board level
arm64: dts: ti: k3-j721e: Enable TSCADC nodes at the board level
arm64: dts: ti: k3-j7200: Enable GPIO nodes at the board level
...
Link: https://lore.kernel.org/r/20230814160651.frxohyshd2evp2k4@expenses
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New board device trees: i.MX93 based MBa93xxLA SBC, DEBIX SOM A,
Gateworks i.MX8MM and i.MX8MP Venice boards.
- Add HDMI audio and video support for i.MX8MM/N Beacon board.
- Add coresight trace support for i.MX8MQ SoC.
- Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties.
- Add sound card support for verdin-imx8mp devices.
- A couple of change from Frank Li to add CPU frequency table and
thermal support for i.MX8QM SoC.
- Add L1 and L2 cache info for LS1028A SoC.
- A series of i.MX93 changes from Peng Fan t oadd thermal and CM33 core
support.
- A few imx8mq-librem5 updates from Martin Kepplinger and
Sebastian Krzyszkowiak.
- A series of imx8mp-phycore-som changes from Teresa Remmet to update
regulators.
- A bunch of changes from Tim Harvey to update various Gateworks boards.
- A bunch of dtschema warning fixes from Fabio Estevam, Krzysztof
Kozlowski, etc.
- Other small and random changes.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmTYmCAUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7fOAgAh5QwBeaKknSifUDHkpuIp7bqRari
ADVxPp+E9g9dp3PNwZsgaODs2nYK8OCGcRhLX95s31fHOWWS5qCIxHL7gKwcB26Q
nig8zsYA8DMChDq7Nd/Sc5SbaxHpuvGq86Qm2+YaLMJVlXKLobz1axn8xdZizWgc
mhETuUQWi01D+UgF/9PZKaLjAMBtQRxmRedwwIgjjZ6trdtYd+S6/u8ekYBFdTEa
aYr0oolZBk0ZMucPmuBq2+FQIE+HvVKSnAor798hX+36acw0sbQkEDP7aUPNd6/S
O3I81nleFGzy2J9lRjkz2cTPvkaBc98V6HnBVWM1V6sn6mpyFCmb1siYyw==
=Yz7M
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=2TG4
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree chanage for 6.6:
- New board device trees: i.MX93 based MBa93xxLA SBC, DEBIX SOM A,
Gateworks i.MX8MM and i.MX8MP Venice boards.
- Add HDMI audio and video support for i.MX8MM/N Beacon board.
- Add coresight trace support for i.MX8MQ SoC.
- Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties.
- Add sound card support for verdin-imx8mp devices.
- A couple of change from Frank Li to add CPU frequency table and
thermal support for i.MX8QM SoC.
- Add L1 and L2 cache info for LS1028A SoC.
- A series of i.MX93 changes from Peng Fan t oadd thermal and CM33 core
support.
- A few imx8mq-librem5 updates from Martin Kepplinger and
Sebastian Krzyszkowiak.
- A series of imx8mp-phycore-som changes from Teresa Remmet to update
regulators.
- A bunch of changes from Tim Harvey to update various Gateworks boards.
- A bunch of dtschema warning fixes from Fabio Estevam, Krzysztof
Kozlowski, etc.
- Other small and random changes.
* tag 'imx-dt64-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (88 commits)
arm64: dts: imx8mq-librem5-devkit: Drop power-supply
arm64: dts: imx8mq-librem5-devkit: Mark buck2 as always on
arm64: dts: imx8mm-beacon-baseboard: Remove usbotg2 pinctrl-names
arm64: dts: imx8mm-emcon: Remove iomuxc pinctrl-names
arm64: dts: imx8m-beacon-kit: Remove extra sound-sai entry
arm64: dts: freescale: Add DEBIX SOM A and SOM A I/O Board support
arm64: dts: imx8mp-debix: remove unused fec pinctrl node
arm64: dts: imx8mp-debix-model-a: Remove invalid rtc property
arm64: dts: imx8mp-msc-sm2s-ep1: Remove invalid sgtl5000 property
arm64: dts: imx8m-venice: Pass "brcm,bcm4329-fmac"
arm64: dts: imx8mp-evk: Add HDMI support
arm64: dts: freescale: verdin-imx8mp: dev: add sound card
arm64: dts: freescale: verdin-imx8mp: dahlia: add sound card
arm64: dts: imx8mm-emcon: Fix the regulator names
arm64: dts: imx: Pass a single BD71847 clock entry
arm64: dts: ls1028a: add l1 and l2 cache info
arm64: dts: imx8mm-phyboard-polis-rdk: Remove 'fsl,spi-num-chipselects'
arm64: dts: imx8dxl-evk: Remove 'fsl,spi-num-chipselects'
arm64: dts: freescale: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
arm64: dts: tqma8mqnl: Add vcc supply to i2c eeproms
...
Link: https://lore.kernel.org/r/20230813133354.847010-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Similar to A5, E5 uses a Melfas MMS345L touchscreen that is connected to
blsp_i2c5. Add it to the device tree.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230812071448.4710-1-linmengbo0689@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When initially submitted, the sc7180 support only targeted CROS devices
that make use of alternative TF-A firmware and not the official Qualcomm
firmware. The PSCI implementations in those firmwares differ however so
devices that use qcom firmware, like WoA laptops such as aspire1 need
different setup.
This commit adjusts the SoC dtsi to the OSI mode PSCI setup, common to
the Qualcomm firmware and introduces new sc7180-firmware-tfa.dtsi that
overrides the PSCI setup for the PC mode and uses TF-A specific
psci-suspend-param. This dtsi is added to all boards that appear to use
TF-A.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20230808-sc7180-tfa-fw-v1-1-666d5d8467e5@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Disappointigly, the camera activity LED is implemented in software.
Hook it up as a gpio-led and (until we have camera *and* a "camera on"
LED trigger) configure it as a panic indicator.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230805-topic-x13s_cam_led-v1-1-443d752158c4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Pins 83-86 and 158-160 are NC, so there's no point in keeping them
reserved. Take care of that.
Fixes: 32c231385e ("arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad X13s devicetree")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803-topic-x13s_pin-v1-1-fae792274e89@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the required nodes to support the display hardware on msm8998.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[konrad: update the commit msg and AGdR's email, rebase]
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230805-topic-8998_dpu-v1-1-9d402dc1ecc0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add rpmhpd node and opps for this node to the SDX75 dts.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/1691415534-31820-9-git-send-email-quic_rohiagar@quicinc.com
[bjorn: include qcom-rpmpd.h as well]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The MMSS SMMU has its own power domain. Attach it so that we can drop
the "keep it always-on" hack.
Fixes: 05ce21b544 ("arm64: dts: qcom: msm8998: Configure the multimedia subsystem iommu")
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230531-topic-8998_mmssclk-v3-2-ba1b1fd9ee75@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The MMSS SMMU has been abusingly consuming the exposed RPM interconnect
clock. Drop it.
Fixes: 05ce21b544 ("arm64: dts: qcom: msm8998: Configure the multimedia subsystem iommu")
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230531-topic-8998_mmssclk-v3-1-ba1b1fd9ee75@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
MMCC has its own GPLL0 legs - one for 1-1 and one for div-2 output.
We've already been using the correct one in the non-div case, start
doing so for the other one as well.
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-8-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
GPUCC has its own GPLL0 leg, switch to it to allow shutting it down
when it's unused.
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-8998clk-v2-7-6222fbc2916b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for wlan-2g LED on GPIO 36 and wps buttons on GPIO 35.
Signed-off-by: Sridharan S N <quic_sridsn@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230616083238.20690-2-quic_sridsn@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
At the moment we define a single ov5640 sensor in the apq8016-sbc and
disable that sensor.
The sensor mezzanine for this is a D3 Engineering Dual ov5640 mezzanine
card. Move the definition from the apq8016-sbc where it shouldn't be to a
standalone dts.
Enables the sensor by default, as we are adding a standalone mezzanine
structure.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811234738.2859417-7-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are two control lines controlled by GPIO going into ov5640
- Reset
- Powerdown
The driver and yaml expect "reset-gpios" and "powerdown-gpios" there has
never been an "enable-gpios".
Fixes: 39e0ce6cd1 ("arm64: dts: qcom: apq8016-sbc: Add CCI/Sensor nodes")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811234738.2859417-6-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The driver for the ov5640 doesn't do a set-rate, instead it expects the
clock to already be set at an appropriate rate.
Similarly the yaml for ov5640 doesn't understand clock-frequency. Convert
from clock-rate to assigned-clock and assigned-clock-rate to remediate.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811234738.2859417-5-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The yaml constraint for data-lanes is [1, 2] not [0, 2]. The driver itself
doesn't do anything with the data-lanes declaration save count the number
of specified data-lanes and calculate the link rate so, this change doesn't
have any functional side-effects.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230811234738.2859417-4-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The ov5640 driver expects DOVDD, AVDD and DVDD as regulator supply names.
The ov5640 has depended on these names since the driver was committed
upstream in 2017. Similarly apq8016-sbc.dtsi has had completely different
regulator names since its own initial commit in 2020.
Perhaps the regulators were left on in previous 410c bootloaders. In any
case today on 6.5 we won't switch on the ov5640 without correctly naming
the regulators.
Fixes: 39e0ce6cd1 ("arm64: dts: qcom: apq8016-sbc: Add CCI/Sensor nodes")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811234738.2859417-3-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Each CSIPHY in CAMMS maps to a port here in the dtsi, since the number of
CSIPHYs is fixed per SoC define the 8916 ports for both available PHYs.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811234738.2859417-2-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Linus Torvalds
Krzysztof Kozlowski
Arnd Bergmann
Greg Kroah-Hartman
Amit Pundir
Konrad Dybcio
Niravkumar L Rabara
Lin, Meng-Bo
Nikita Travkin
AngeloGioacchino Del Regno
David Wronek
Rohit Agarwal
Sridharan S N
Bryan O'Donoghue