DSP_SW_INTR_STAT_OFFSET is a common interrupt register which will be
accessed by both ACP firmware and driver. This register contains register
bits corresponds to host to dsp interrupts and vice versa.
when dsp to host interrupt is reported, only clear dsp to host
interrupt bit in DSP_SW_INTR_STAT_OFFSET.
Fixes: 2e7c6652f9 ("ASoC: SOF: amd: Fix for handling spurious interrupts from DSP")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-7-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Due to scratch memory persistence, Once the DSP panic is reported, need to
clear the panic mask after handling DSP panic. Otherwise, It results in DSP
panic on next reboot.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-6-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Few AMD platforms require ACP ACLK as clock source.
Add conditional check for clock mux selection register for
switching between internal clock and ACP ACLK.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-5-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add module parameter for firmware debug. If firmware debug
flag is enabled, clear the fusion stall bit which is required
for enabling firmware debugging through JTAG.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously ACP SOF firmware used to enable the ACP external
global interrupt register.
This will restrict to report ACP host interrupts only after
firmware loading is successful.
This register needs to be set from host driver to handle
other ACP interrupts(SoundWire Interrupts) before loading
the ACP firmware.
Add field for external interrupt enable register in acp descriptor
structure and enable the external interrupt enable register.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During initial development time for RN platform, when SHA
dma gets completed, SHA DMA engine used to raise the ACP interrupt.
In ACP interrupt handler, SHA DMA interrupt got handled.
Currently SHA DMA compleition is verified by checking
transfer count using read poll time out logic.
Remove unused SHA dma interrupt handling code.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new module parameter ipc4_ignore_cpc which can be used to force the
kernel to ignore the queried CPC value for all firmware modules and use 0
instead.
The CPC lookup is still done to report missing configurations and the
debug print is going to be different to be explicit that the CPC is ignored
and what was the value we would have used.
The CPC value is sent to the firmware with the MOD_INIT_INSTANCE message
and it is used by the firmware as a parameter for clock scaling.
The flag is intended to be used only when there is a need to validate the
firmware behavior regarding to clock scaling since the 0 CPC value will
force the DSP to run in full speed, disabling the scaling and provides
additional counter point to rule out clock management related issues.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822065419.24374-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The SRC component in a pipeline provides flexibility on the sampling
rate which was not handled previously. This series will improve the
kernel side with the needed logic to be able to deal with the SRC type
of components in pipelines.
If the copier has only output valid_bits across all its output
formats, the reference for selecting the output format must be set that
instead of the valid_bits from the selected input format.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230821113629.5017-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When we walk the list of connected widgets from the source to the sink
to prepare all widgets, the pipeline_params must be modified to reflect
the output audio format at each widget. But, the copier only modifies
the sample format in the pipeline_params. So, fix it to also modify the
rate and channels.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230821113629.5017-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For playback, the SRC sink rate must be configured based on the requested
output format which is restricted to only handle DAI's that support a
single audio format for now. For capture, the SRC module should convert
the rate to match the rate requested by the PCM hw_params.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230821113629.5017-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify the pipeline_params based on the SRC output format and set the
sink_rate in the IPC data.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230821113629.5017-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The call to snd_sof_find_spcm_dai() could return NULL,
add nullable check for the return value to avoid null
pointer defenrece.
Fixes: 7cb19007ba ("ASoC: SOF: ipc4-pcm: add hw_params")
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230816133311.7523-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Li Zetao <lizetao1@huawei.com>:
This patch set use the helper function devm_kmemdup() to replace
devm_kmalloc + memcpy, which is the same as implementing the function
separately.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The use of the widget name as a prefix for the kcontrol name is quite
useful in the case of multiple pipelines going to the same endpoint,
but it's overkill in simpler cases.
This patchset extends the existing DAPM code to drop the widget name
prefix and make the kcontrol names simpler when there's no possible
ambiguity, e.g. "gain.2.1 Main Playback Volume" becomes just "Main
Playback Volume".
Existing HDA stream creation is split into two
for loops for capture and playback, but most of
the code in the two for loops are duplicated.
This patch refactors HDA stream creation with a
single for loop, thus remove code duplication.
No functional change in this patch.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230814231519.79051-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds SOF_TKN_COMP_NO_WNAME_IN_KCONTROL_NAME token, and copies the
token's tuple value to the no_wname_in_kcontrol_name flag in struct
snd_soc_dapm_widget.
If the tuple value for the token in the topology is true, then the
widget name is not added to the mixer name. In practice "gain.2.1 Post
Mixer Analog Playback Volume" becomes just "Post Mixer Analog Playback
Volume".
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230814232325.86397-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the helper function devm_kmemdup() rather than duplicating its
implementation, which helps to enhance code readability.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20230810114738.2103792-3-lizetao1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
./sound/soc/sof/intel/lnl.c: hda.h is included more than once.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230810005555.4610-1-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clang warns (or errors with CONFIG_WERROR):
sound/soc/sof/intel/hda.c:423:6: error: variable 'chip' is uninitialized when used here [-Werror,-Wuninitialized]
423 | if (chip && chip->check_sdw_wakeen_irq)
| ^~~~
sound/soc/sof/intel/hda.c:418:39: note: initialize the variable 'chip' to silence this warning
418 | const struct sof_intel_dsp_desc *chip;
| ^
| = NULL
1 error generated.
Add the missing initialization, following the pattern of the other irq
functions.
Fixes: 9362ab78f1 ("ASoC: SOF: Intel: add abstraction for SoundWire wake-ups")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230809-intel-hda-missing-chip-init-v1-1-61557ca6fa8a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The sof_ipc4_update_resource_usage() call updates the CPC value in basecfg
and it must be done prior to making a copy of the copier configuration
for the init message.
Other module types do the resource update as last step or in case of a
process module at the correct time, before the memcpy.
Fixes: d8a2c98793 ("ASoC: SOF: ipc4-loader/topology: Query the CPC value from manifest")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://lore.kernel.org/r/20230809125656.27585-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With IPC3, we reset hw_params during the stop trigger, so we should also
clean up the link DMA during the stop trigger.
Fixes: 1bf83fa665 ("ASoC: SOF: Intel: hda-dai: Do not perform DMA cleanup during stop")
Closes: https://github.com/thesofproject/linux/issues/4455
Closes: https://github.com/thesofproject/linux/issues/4482
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217673
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230808110627.32375-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset first fixes a number of errors made in the hda-mlink
support, then adds Lunar Lake definitions. The main contribution is
the hda-dai changes where the HDaudio DMA is now used for SSP, DMIC
and SoundWire. In previous hardware the GPDMA (aka DesignWare) was
used and controlled by the audio firmware. The volume of code is
minimized with the abstraction added in previous kernel cycles.
Due to cross-dependencies between ASoC and SoundWire trees, the full
support for jack detection will be deferred to the next kernel
cycle. There's not much point to ask for a sync of the two trees to
support one patch for each tree - we are at -rc5 already.
When using more than one sublink for amplifier aggregation, we need to
add the sublink info to debug the programming sequences.
No functional change, only additional precisions in the log.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A pipeline is identified by two indices: 'instance_id' and 'pipeline_id'
This is clearly seen in kernel logs when creating a pipeline
"Create widget pipeline.20 instance 0 - pipe 20 - core 0"
but other logs are less clear
"ipc4 set pipeline 1 state 4"
Change definitions and logs to make sure the logs clearly identify
which of the two indices are used in state transitions.
No functional change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The solution used before LunarLake relies on a 'Multi-gateway'
firmware configuration. This is no longer needed with the DMA hardware
handling multiple links directly. To avoid adding a platform-specific
quirk in the generic IPC4 code, this patch resets the device count
when fetching the stream context.
Suggested-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to retrieve the current value to deal with the HDAudio
WAKEEN/WAKESTS setup.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code cannot work for LunarLake, let's add a layer of
abstraction.
No functional change in this patch.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These callbacks are just wrappers to keep the code relatively clean.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During the hw_params and hw_free stages, we need to map the stream tag
and channels in the PCMSyCM registers.
The trigger callback is just a wrapper.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Same abstraction as SSP/DMIC, with only the get_hlink helper changing.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When we have multiple CPU DAIs in a dailink, typically for SoundWire
aggregated solutions with amplifiers on multiple links, we only want
to allocate one HDaudio stream_tag. The simplest solution is to
allocate the hext_stream/stream_tag for the DAI with index 0 in the
dailink, and reuse the same stream for all other CPU DAIs.
This assumption relies on serialization of DAIs by the ASoC core,
where all CPU DAIs are handled in a loop.
The stream release follows the same idea of releasing the tag for the
first DAI only. Ideally we would want the loop to be handled in
reverse-order to summetry, but there is no risk of reusing a
stream_tag which is no longer valid.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can reuse the same helpers as for SSP, with just the link type
being different.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new ops for SSP.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DMA widget ops are almost similar to the HDaudio ones, with the
exception of codec_dai_set_hext_stream() which is not relevant and the
format calculation which isn't dependent on the codec dai.
The DMA ops can be selected only starting with ACE_2_0.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the LunarLake hardware, the default IP ownership changed to the
host driver, instead of the firmware in previous generation.
In the absence of any capability negotiation, we need to assume a
fixed partitioning between host driver and firmware. The OFLEN bit
needs to be set as early as possible for resources handled by the
firmware, since we can't control when the firmware might try to access
the resources.
For now DMIC and SSP are handled by the DSP firmware. SoundWire is a
separate case, the OFLEN bit can be set when starting-up and resuming
the aux device for each link.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It was just a matter of time before we found a case where we needed
separate ops for MTL and LNL. For LNL we need to set the DMIC/SSP
OFLEN bit in the probe and resume steps, and this can only be done
cleanly with separate ops.
The function prototypes in mtl.h were added in the same order as their
implementation in mtl.c.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add initial support for Lunarlake. For now only HDAudio interfaces are
supported, DMIC/SSP/SoundWire require additional work so that the DAIs
reuse the HDaudio DMA stream allocation.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All interfaces are accessible without the DSP and rely on the HDaudio
DMA only.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The initial code had a logic flaw where the gateway config length kept
increasing after each playback/capture trigger, with the DMA config
TLV being added at every call of sof_ipc4_prepare_copier_module()
This didn't cause any issues with regular playback/capture, but this
was flagged as an error by firmware in the case of multiple amplifiers
on different links.
Fixes: a0659f81c3 ("ASoC: SOF: ipc4-topology: add DMA config TLV to IPC data")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a pipeline contains multiple DAI widgets, the pipe_widget is not
set up except for the first DAI. This result in the pipe_widget having
a default instance 0, which can conflict with another real the
pipeline instance 0 and leads to spurious transitions.
This patch makes sure the instance_id is properly initialized to a
-EINVAL value.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Likely a combination of copy-paste and test coverage problem. Oops.
Fixes: 87a6ddc0cf ("ASoC: SOF: Intel: hda-mlink: program SoundWire LSDIID registers")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>