Although the fixed counter 3 and its exclusive pseudo slots event are
not supported by KVM yet, the architectural slots event is supported by
KVM and can be programmed on any GP counter. Thus add validation for this
architectural slots event.
Top-down slots event "counts the total number of available slots for an
unhalted logical processor, and increments by machine-width of the
narrowest pipeline as employed by the Top-down Microarchitecture
Analysis method."
As for the slot, it's an abstract concept which indicates how many
uops (decoded from instructions) can be processed simultaneously
(per cycle) on HW. In Top-down Microarchitecture Analysis (TMA) method,
the processor is divided into two parts, frond-end and back-end. Assume
there is a processor with classic 5-stage pipeline, fetch, decode,
execute, memory access and register writeback. The former 2 stages
(fetch/decode) are classified to frond-end and the latter 3 stages are
classified to back-end.
In modern Intel processors, a complicated instruction would be decoded
into several uops (micro-operations) and so these uops can be processed
simultaneously and then improve the performance. Thus, assume a
processor can decode and dispatch 4 uops in front-end and execute 4 uops
in back-end simultaneously (per-cycle), so the machine-width of this
processor is 4 and this processor has 4 topdown slots per-cycle.
If a slot is spare and can be used to process a new upcoming uop, then
the slot is available, but if a uop occupies a slot for several cycles
and can't be retired (maybe blocked by memory access), then this slot is
stall and unavailable.
Considering the testing instruction sequence can't be macro-fused on x86
platforms, the measured slots count should not be less than
NUM_INSNS_RETIRED. Thus assert the slots count against NUM_INSNS_RETIRED.
pmu_counters_test passed with this patch on Intel Sapphire Rapids.
About the more information about TMA method, please refer the below link.
https://www.intel.com/content/www/us/en/docs/vtune-profiler/cookbook/2023-0/top-down-microarchitecture-analysis-method.html
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240218043003.2424683-1-dapeng1.mi@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend the read/write PMU counters subtest to verify that RDPMC also reads
back the written value. Opportunsitically verify that attempting to use
the "fast" mode of RDPMC fails, as the "fast" flag is only supported by
non-architectural PMUs, which KVM doesn't virtualize.
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-30-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add KVM_ASM_SAFE_FEP() to allow forcing emulation on an instruction that
might fault. Note, KVM skips RIP past the FEP prefix before injecting an
exception, i.e. the fixup needs to be on the instruction itself. Do not
check for FEP support, that is firmly the responsibility of whatever code
wants to use KVM_ASM_SAFE_FEP().
Sadly, chaining variadic arguments that contain commas doesn't work, thus
the unfortunate amount of copy+paste.
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-28-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add helpers to read integer module params, which is painfully non-trivial
because the pain of dealing with strings in C is exacerbated by the kernel
inserting a newline.
Don't bother differentiating between int, uint, short, etc. They all fit
in an int, and KVM (thankfully) doesn't have any integer params larger
than an int.
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-24-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Expand the PMU counters test to verify that LLC references and misses have
non-zero counts when the code being executed while the LLC event(s) is
active is evicted via CFLUSH{,OPT}. Note, CLFLUSH{,OPT} requires a fence
of some kind to ensure the cache lines are flushed before execution
continues. Use MFENCE for simplicity (performance is not a concern).
Suggested-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-22-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add test cases to verify that Intel's Architectural PMU events work as
expected when they are available according to guest CPUID. Iterate over a
range of sane PMU versions, with and without full-width writes enabled,
and over interesting combinations of lengths/masks for the bit vector that
enumerates unavailable events.
Test up to vPMU version 5, i.e. the current architectural max. KVM only
officially supports up to version 2, but the behavior of the counters is
backwards compatible, i.e. KVM shouldn't do something completely different
for a higher, architecturally-defined vPMU version. Verify KVM behavior
against the effective vPMU version, e.g. advertising vPMU 5 when KVM only
supports vPMU 2 shouldn't magically unlock vPMU 5 features.
According to Intel SDM, the number of architectural events is reported
through CPUID.0AH:EAX[31:24] and the architectural event x is supported
if EBX[x]=0 && EAX[31:24]>x.
Handcode the entirety of the measured section so that the test can
precisely assert on the number of instructions and branches retired.
Co-developed-by: Like Xu <likexu@tencent.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-17-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend the kvm_x86_pmu_feature framework to allow querying for fixed
counters via {kvm,this}_pmu_has(). Like architectural events, checking
for a fixed counter annoyingly requires checking multiple CPUID fields, as
a fixed counter exists if:
FxCtr[i]_is_supported := ECX[i] || (EDX[4:0] > i);
Note, KVM currently doesn't actually support exposing fixed counters via
the bitmask, but that will hopefully change sooner than later, and Intel's
SDM explicitly "recommends" checking both the number of counters and the
mask.
Rename the intermedate "anti_feature" field to simply 'f' since the fixed
counter bitmask (thankfully) doesn't have reversed polarity like the
architectural events bitmask.
Note, ideally the helpers would use BUILD_BUG_ON() to assert on the
incoming register, but the expected usage in PMU tests can't guarantee the
inputs are compile-time constants.
Opportunistically define macros for all of the known architectural events
and fixed counters.
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Pull cxl fixes from Dan Williams:
"A build regression fix, a device compatibility fix, and an original
bug preventing creation of large (16 device) interleave sets:
- Fix unit test build regression fallout from global
"missing-prototypes" change
- Fix compatibility with devices that do not support interrupts
- Fix overflow when calculating the capacity of large interleave sets"
* tag 'cxl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region：Fix overflow issue in alloc_hpa()
cxl/pci: Skip irq features if MSI/MSI-X are not supported
tools/testing/nvdimm: Disable "missing prototypes / declarations" warnings
tools/testing/cxl: Disable "missing prototypes / declarations" warnings
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, netfilter and WiFi.
Jakub is doing a lot of work to include the self-tests in our CI, as a
result a significant amount of self-tests related fixes is flowing in
(and will likely continue in the next few weeks).
Current release - regressions:
- bpf: fix a kernel crash for the riscv 64 JIT
- bnxt_en: fix memory leak in bnxt_hwrm_get_rings()
- revert "net: macsec: use skb_ensure_writable_head_tail to expand
the skb"
Previous releases - regressions:
- core: fix removing a namespace with conflicting altnames
- tc/flower: fix chain template offload memory leak
- tcp:
- make sure init the accept_queue's spinlocks once
- fix autocork on CPUs with weak memory model
- udp: fix busy polling
- mlx5e:
- fix out-of-bound read in port timestamping
- fix peer flow lists corruption
- iwlwifi: fix a memory corruption
Previous releases - always broken:
- netfilter:
- nft_chain_filter: handle NETDEV_UNREGISTER for inet/ingress
basechain
- nft_limit: reject configurations that cause integer overflow
- bpf: fix bpf_xdp_adjust_tail() with XSK zero-copy mbuf, avoiding a
NULL pointer dereference upon shrinking
- llc: make llc_ui_sendmsg() more robust against bonding changes
- smc: fix illegal rmb_desc access in SMC-D connection dump
- dpll: fix pin dump crash for rebound module
- bnxt_en: fix possible crash after creating sw mqprio TCs
- hv_netvsc: calculate correct ring size when PAGE_SIZE is not 4kB
Misc:
- several self-tests fixes for better integration with the netdev CI
- added several missing modules descriptions"
* tag 'net-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
tsnep: Fix XDP_RING_NEED_WAKEUP for empty fill ring
tsnep: Remove FCS for XDP data path
net: fec: fix the unhandled context fault from smmu
selftests: bonding: do not test arp/ns target with mode balance-alb/tlb
fjes: fix memleaks in fjes_hw_setup
i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queue
i40e: set xdp_rxq_info::frag_size
xdp: reflect tail increase for MEM_TYPE_XSK_BUFF_POOL
ice: update xdp_rxq_info::frag_size for ZC enabled Rx queue
intel: xsk: initialize skb_frag_t::bv_offset in ZC drivers
ice: remove redundant xdp_rxq_info registration
i40e: handle multi-buffer packets that are shrunk by xdp prog
ice: work on pre-XDP prog frag count
xsk: fix usage of multi-buffer BPF helpers for ZC XDP
xsk: make xsk_buff_pool responsible for clearing xdp_buff::flags
xsk: recycle buffer in case Rx queue was full
net: fill in MODULE_DESCRIPTION()s for rvu_mbox
net: fill in MODULE_DESCRIPTION()s for litex
net: fill in MODULE_DESCRIPTION()s for fsl_pq_mdio
net: fill in MODULE_DESCRIPTION()s for fec
...
If there is more than 32 cpus the bitmask will start to contain
commas, leading to:
./rps_default_mask.sh: line 36: [: 00000000,00000000: integer expression expected
Remove the commas, bash doesn't interpret leading zeroes as oct
so that should be good enough. Switch to bash, Simon reports that
not all shells support this type of substitution.
Fixes: c12e0d5f26 ("self-tests: introduce self-tests for RPS default mask")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240122195815.638997-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub reported that ASSERT_EQ(cpu, i) in so_incoming_cpu.c seems to
fire somewhat randomly.
# # RUN so_incoming_cpu.before_reuseport.test3 ...
# # so_incoming_cpu.c:191:test3:Expected cpu (32) == i (0)
# # test3: Test terminated by assertion
# # FAIL so_incoming_cpu.before_reuseport.test3
# not ok 3 so_incoming_cpu.before_reuseport.test3
When the test failed, not-yet-accepted CLOSE_WAIT sockets received
SYN with a "challenging" SEQ number, which was sent from an unexpected
CPU that did not create the receiver.
The test basically does:
1. for each cpu:
1-1. create a server
1-2. set SO_INCOMING_CPU
2. for each cpu:
2-1. set cpu affinity
2-2. create some clients
2-3. let clients connect() to the server on the same cpu
2-4. close() clients
3. for each server:
3-1. accept() all child sockets
3-2. check if all children have the same SO_INCOMING_CPU with the server
The root cause was the close() in 2-4. and net.ipv4.tcp_tw_reuse.
In a loop of 2., close() changed the client state to FIN_WAIT_2, and
the peer transitioned to CLOSE_WAIT.
In another loop of 2., connect() happened to select the same port of
the FIN_WAIT_2 socket, and it was reused as the default value of
net.ipv4.tcp_tw_reuse is 2.
As a result, the new client sent SYN to the CLOSE_WAIT socket from
a different CPU, and the receiver's sk_incoming_cpu was overwritten
with unexpected CPU ID.
Also, the SYN had a different SEQ number, so the CLOSE_WAIT socket
responded with Challenge ACK. The new client properly returned RST
and effectively killed the CLOSE_WAIT socket.
This way, all clients were created successfully, but the error was
detected later by 3-2., ASSERT_EQ(cpu, i).
To avoid the failure, let's make sure that (i) the number of clients
is less than the number of available ports and (ii) such reuse never
happens.
Fixes: 6df96146b2 ("selftest: Add test for SO_INCOMING_CPU.")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240120031642.67014-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Prevent warnings of the form:
tools/testing/nvdimm/config_check.c:4:6: error: no previous prototype
for ‘check’ [-Werror=missing-prototypes]
...by locally disabling some warnings.
It turns out that:
Commit 0fcb70851f ("Makefile.extrawarn: turn on missing-prototypes globally")
...in addition to expanding in-tree coverage, also impacts out-of-tree
module builds like those in tools/testing/nvdimm/.
Filter out the warning options on unit test code that does not effect
mainline builds.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/170543984331.460832.1780246477583036191.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Prevent warnings of the form:
tools/testing/cxl/test/mock.c:44:6: error: no previous prototype for
‘__wrap_is_acpi_device_node’ [-Werror=missing-prototypes]
tools/testing/cxl/test/mock.c:63:5: error: no previous prototype for
‘__wrap_acpi_table_parse_cedt’ [-Werror=missing-prototypes]
tools/testing/cxl/test/mock.c:81:13: error: no previous prototype for
‘__wrap_acpi_evaluate_integer’ [-Werror=missing-prototypes]
...by locally disabling some warnings.
It turns out that:
Commit 0fcb70851f ("Makefile.extrawarn: turn on missing-prototypes globally")
...in addition to expanding in-tree coverage, also impacts out-of-tree
module builds like those in tools/testing/cxl/.
Filter out the warning options on unit test code that does not effect
mainline builds.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/170543983780.460832.10920261849128601697.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull more RISC-V updates from Palmer Dabbelt:
- Support for tuning for systems with fast misaligned accesses.
- Support for SBI-based suspend.
- Support for the new SBI debug console extension.
- The T-Head CMOs now use PA-based flushes.
- Support for enabling the V extension in kernel code.
- Optimized IP checksum routines.
- Various ftrace improvements.
- Support for archrandom, which depends on the Zkr extension.
- The build is no longer broken under NET=n, KUNIT=y for ports that
don't define their own ipv6 checksum.
* tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (56 commits)
lib: checksum: Fix build with CONFIG_NET=n
riscv: lib: Check if output in asm goto supported
riscv: Fix build error on rv32 + XIP
riscv: optimize ELF relocation function in riscv
RISC-V: Implement archrandom when Zkr is available
riscv: Optimize hweight API with Zbb extension
riscv: add dependency among Image(.gz), loader(.bin), and vmlinuz.efi
samples: ftrace: Add RISC-V support for SAMPLE_FTRACE_DIRECT[_MULTI]
riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support
riscv: ftrace: Make function graph use ftrace directly
riscv: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
lib/Kconfig.debug: Update AS_HAS_NON_CONST_LEB128 comment and name
riscv: Restrict DWARF5 when building with LLVM to known working versions
riscv: Hoist linker relaxation disabling logic into Kconfig
kunit: Add tests for csum_ipv6_magic and ip_fast_csum
riscv: Add checksum library
riscv: Add checksum header
riscv: Add static key for misaligned accesses
asm-generic: Improve csum_fold
RISC-V: selftests: cbo: Ensure asm operands match constraints
...
When tests are run by runner.sh, bond_options.sh gets killed before
it can complete:
make -C tools/testing/selftests run_tests TARGETS="drivers/net/bonding"
[...]
# timeout set to 120
# selftests: drivers/net/bonding: bond_options.sh
# TEST: prio (active-backup miimon primary_reselect 0) [ OK ]
# TEST: prio (active-backup miimon primary_reselect 1) [ OK ]
# TEST: prio (active-backup miimon primary_reselect 2) [ OK ]
# TEST: prio (active-backup arp_ip_target primary_reselect 0) [ OK ]
# TEST: prio (active-backup arp_ip_target primary_reselect 1) [ OK ]
# TEST: prio (active-backup arp_ip_target primary_reselect 2) [ OK ]
#
not ok 7 selftests: drivers/net/bonding: bond_options.sh # TIMEOUT 120 seconds
This test includes many sleep statements, at least some of which are
related to timers in the operation of the bonding driver itself. Increase
the test timeout to allow the test to complete.
I ran the test in slightly different VMs (including one without HW
virtualization support) and got runtimes of 13m39.760s, 13m31.238s, and
13m2.956s. Use a ~1.5x "safety factor" and set the timeout to 1200s.
Fixes: 42a8d4aaea ("selftests: bonding: add bonding prio option test")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240116104402.1203850a@kernel.org/#t
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240118001233.304759-1-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Previous releases - regressions:
- Revert "net: rtnetlink: Enslave device before bringing it up",
breaks the case inverse to the one it was trying to fix
- net: dsa: fix oob access in DSA's netdevice event handler
dereference netdev_priv() before check its a DSA port
- sched: track device in tcf_block_get/put_ext() only for clsact
binder types
- net: tls, fix WARNING in __sk_msg_free when record becomes full
during splice and MORE hint set
- sfp-bus: fix SFP mode detect from bitrate
- drv: stmmac: prevent DSA tags from breaking COE
Previous releases - always broken:
- bpf: fix no forward progress in in bpf_iter_udp if output buffer is
too small
- bpf: reject variable offset alu on registers with a type of
PTR_TO_FLOW_KEYS to prevent oob access
- netfilter: tighten input validation
- net: add more sanity check in virtio_net_hdr_to_skb()
- rxrpc: fix use of Don't Fragment flag on RESPONSE packets, avoid
infinite loop
- amt: do not use the portion of skb->cb area which may get clobbered
- mptcp: improve validation of the MPTCPOPT_MP_JOIN MCTCP option
Misc:
- spring cleanup of inactive maintainers"
* tag 'net-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
i40e: Include types.h to some headers
ipv6: mcast: fix data-race in ipv6_mc_down / mld_ifc_work
selftests: mlxsw: qos_pfc: Adjust the test to support 8 lanes
selftests: mlxsw: qos_pfc: Remove wrong description
mlxsw: spectrum_router: Register netdevice notifier before nexthop
mlxsw: spectrum_acl_tcam: Fix stack corruption
mlxsw: spectrum_acl_tcam: Fix NULL pointer dereference in error path
mlxsw: spectrum_acl_erp: Fix error flow of pool allocation failure
ethtool: netlink: Add missing ethnl_ops_begin/complete
selftests: bonding: Add more missing config options
selftests: netdevsim: add a config file
libbpf: warn on unexpected __arg_ctx type when rewriting BTF
selftests/bpf: add tests confirming type logic in kernel for __arg_ctx
bpf: enforce types for __arg_ctx-tagged arguments in global subprogs
bpf: extract bpf_ctx_convert_map logic and make it more reusable
libbpf: feature-detect arg:ctx tag support in kernel
ipvs: avoid stat macros calls from preemptible context
netfilter: nf_tables: reject NFT_SET_CONCAT with not field length description
netfilter: nf_tables: skip dead set elements in netlink dump
netfilter: nf_tables: do not allow mismatch field size and set key length
...
Pull CXL (Compute Express Link) updates from Dan Williams:
"The bulk of this update is support for enumerating the performance
capabilities of CXL memory targets and connecting that to a platform
CXL memory QoS class. Some follow-on work remains to hook up this data
into core-mm policy, but that is saved for v6.9.
The next significant update is unifying how CXL event records (things
like background scrub errors) are processed between so called
"firmware first" and native error record retrieval. The CXL driver
handler that processes the record retrieved from the device mailbox is
now the handler for that same record format coming from an EFI/ACPI
notification source.
This also contains miscellaneous feature updates, like Get Timestamp,
and other fixups.
Summary:
- Add support for parsing the Coherent Device Attribute Table (CDAT)
- Add support for calculating a platform CXL QoS class from CDAT data
- Unify the tracing of EFI CXL Events with native CXL Events.
- Add Get Timestamp support
- Miscellaneous cleanups and fixups"
* tag 'cxl-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (41 commits)
cxl/core: use sysfs_emit() for attr's _show()
cxl/pci: Register for and process CPER events
PCI: Introduce cleanup helpers for device reference counts and locks
acpi/ghes: Process CXL Component Events
cxl/events: Create a CXL event union
cxl/events: Separate UUID from event structures
cxl/events: Remove passing a UUID to known event traces
cxl/events: Create common event UUID defines
cxl/events: Promote CXL event structures to a core header
cxl: Refactor to use __free() for cxl_root allocation in cxl_endpoint_port_probe()
cxl: Refactor to use __free() for cxl_root allocation in cxl_find_nvdimm_bridge()
cxl: Fix device reference leak in cxl_port_perf_data_calculate()
cxl: Convert find_cxl_root() to return a 'struct cxl_root *'
cxl: Introduce put_cxl_root() helper
cxl/port: Fix missing target list lock
cxl/port: Fix decoder initialization when nr_targets > interleave_ways
cxl/region: fix x9 interleave typo
cxl/trace: Pass UUID explicitly to event traces
cxl/region: use %pap format to print resource_size_t
cxl/region: Add dev_dbg() detail on failure to allocate HPA space
...
Pull iommufd updates from Jason Gunthorpe:
"This brings the first of three planned user IO page table invalidation
operations:
- IOMMU_HWPT_INVALIDATE allows invalidating the IOTLB integrated into
the iommu itself. The Intel implementation will also generate an
ATC invalidation to flush the device IOTLB as it unambiguously
knows the device, but other HW will not.
It goes along with the prior PR to implement userspace IO page tables
(aka nested translation for VMs) to allow Intel to have full
functionality for simple cases. An Intel implementation of the
operation is provided.
Also fix a small bug in the selftest mock iommu driver probe"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Check the bus type during probe
iommu/vt-d: Add iotlb flush for nested domain
iommufd: Add data structure for Intel VT-d stage-1 cache invalidation
iommufd/selftest: Add coverage for IOMMU_HWPT_INVALIDATE ioctl
iommufd/selftest: Add IOMMU_TEST_OP_MD_CHECK_IOTLB test op
iommufd/selftest: Add mock_domain_cache_invalidate_user support
iommu: Add iommu_copy_struct_from_user_array helper
iommufd: Add IOMMU_HWPT_INVALIDATE
iommu: Add cache_invalidate_user op
Pull tracing updates from Steven Rostedt:
- Allow kernel trace instance creation to specify what events are
created
Inside the kernel, a subsystem may create a tracing instance that it
can use to send events to user space. This sub-system may not care
about the thousands of events that exist in eventfs. Allow the
sub-system to specify what sub-systems of events it cares about, and
only those events are exposed to this instance.
- Allow the ring buffer to be broken up into bigger sub-buffers than
just the architecture page size.
A new tracefs file called "buffer_subbuf_size_kb" is created. The
user can now specify a minimum size the sub-buffer may be in
kilobytes. Note, that the implementation currently make the
sub-buffer size a power of 2 pages (1, 2, 4, 8, 16, ...) but the user
only writes in kilobyte size, and the sub-buffer will be updated to
the next size that it will can accommodate it. If the user writes in
10, it will change the size to be 4 pages on x86 (16K), as that is
the next available size that can hold 10K pages.
- Update the debug output when a corrupt time is detected in the ring
buffer. If the ring buffer detects inconsistent timestamps, there's a
debug config options that will dump the contents of the meta data of
the sub-buffer that is used for debugging. Add some more information
to this dump that helps with debugging.
- Add more timestamp debugging checks (only triggers when the config is
enabled)
- Increase the trace_seq iterator to 2 page sizes.
- Allow strings written into tracefs_marker to be larger. Up to just
under 2 page sizes (based on what trace_seq can hold).
- Increase the trace_maker_raw write to be as big as a sub-buffer can
hold.
- Remove 32 bit time stamp logic, now that the rb_time_cmpxchg() has
been removed.
- More selftests were added.
- Some code clean ups as well.
* tag 'trace-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (29 commits)
ring-buffer: Remove stale comment from ring_buffer_size()
tracing histograms: Simplify parse_actions() function
tracing/selftests: Remove exec permissions from trace_marker.tc test
ring-buffer: Use subbuf_order for buffer page masking
tracing: Update subbuffer with kilobytes not page order
ringbuffer/selftest: Add basic selftest to test changing subbuf order
ring-buffer: Add documentation on the buffer_subbuf_order file
ring-buffer: Just update the subbuffers when changing their allocation order
ring-buffer: Keep the same size when updating the order
tracing: Stop the tracing while changing the ring buffer subbuf size
tracing: Update snapshot order along with main buffer order
ring-buffer: Make sure the spare sub buffer used for reads has same size
ring-buffer: Do no swap cpu buffers if order is different
ring-buffer: Clear pages on error in ring_buffer_subbuf_order_set() failure
ring-buffer: Read and write to ring buffers with custom sub buffer size
ring-buffer: Set new size of the ring buffer sub page
ring-buffer: Add interface for configuring trace sub buffer size
ring-buffer: Page size per ring buffer
ring-buffer: Have ring_buffer_print_page_header() be able to access ring_buffer_iter
ring-buffer: Check if absolute timestamp goes backwards
...
Pull x86 SGX updates from Dave Hansen:
"This time, these are entirely confined to SGX selftests fixes.
The mini SGX enclave built by the selftests has garnered some
attention because it stands alone and does not need the sizable
infrastructure of the official SGX SDK. I think that's why folks are
suddently interested in cleaning it up.
- Clean up selftest compilation issues, mostly from non-gcc compilers
- Avoid building selftests when not on x86"
* tag 'x86_sgx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/sgx: Skip non X86_64 platform
selftests/sgx: Remove incomplete ABI sanitization code in test enclave
selftests/sgx: Discard unsupported ELF sections
selftests/sgx: Ensure expected location of test enclave buffer
selftests/sgx: Ensure test enclave buffer is entirely preserved
selftests/sgx: Fix linker script asserts
selftests/sgx: Handle relocations in test enclave
selftests/sgx: Produce static-pie executable for test enclave
selftests/sgx: Remove redundant enclave base address save/restore
selftests/sgx: Specify freestanding environment for enclave compilation
selftests/sgx: Separate linker options
selftests/sgx: Include memory clobber for inline asm in test enclave
selftests/sgx: Fix uninitialized pointer dereferences in encl_get_entry
selftests/sgx: Fix uninitialized pointer dereference in error path
Daniel Borkmann says:
====================
pull-request: bpf 2024-01-18
We've added 10 non-merge commits during the last 5 day(s) which contain
a total of 12 files changed, 806 insertions(+), 51 deletions(-).
The main changes are:
1) Fix an issue in bpf_iter_udp under backward progress which prevents
user space process from finishing iteration, from Martin KaFai Lau.
2) Fix BPF verifier to reject variable offset alu on registers with a type
of PTR_TO_FLOW_KEYS to prevent oob access, from Hao Sun.
3) Follow up fixes for kernel- and libbpf-side logic around handling
arg:ctx tagged arguments of BPF global subprogs, from Andrii Nakryiko.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
libbpf: warn on unexpected __arg_ctx type when rewriting BTF
selftests/bpf: add tests confirming type logic in kernel for __arg_ctx
bpf: enforce types for __arg_ctx-tagged arguments in global subprogs
bpf: extract bpf_ctx_convert_map logic and make it more reusable
libbpf: feature-detect arg:ctx tag support in kernel
selftests/bpf: Add test for alu on PTR_TO_FLOW_KEYS
bpf: Reject variable offset alu on PTR_TO_FLOW_KEYS
selftests/bpf: Test udp and tcp iter batching
bpf: Avoid iter->offset making backward progress in bpf_iter_udp
bpf: iter_udp: Retry with a larger batch size without going back to the previous bucket
====================
Link: https://lore.kernel.org/r/20240118153936.11769-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'qos_pfc' test checks PFC behavior. The idea is to limit the traffic
using a shaper somewhere in the flow of the packets. In this area, the
buffer is smaller than the buffer at the beginning of the flow, so it fills
up until there is no more space left. The test configures there PFC
which is supposed to notice that the headroom is filling up and send PFC
Xoff to indicate the transmitter to stop sending traffic for the priorities
sharing this PG.
The Xon/Xoff threshold is auto-configured and always equal to
2*(MTU rounded up to cell size). Even after sending the PFC Xoff packet,
traffic will keep arriving until the transmitter receives and processes
the PFC packet. This amount of traffic is known as the PFC delay allowance.
Currently the buffer for the delay traffic is configured as 100KB. The
MTU in the test is 10KB, therefore the threshold for Xoff is about 20KB.
This allows 80KB extra to be stored in this buffer.
8-lane ports use two buffers among which the configured buffer is split,
the Xoff threshold then applies to each buffer in parallel.
The test does not take into account the behavior of 8-lane ports, when the
ports are configured to 400Gbps with 8 lanes or 800Gbps with 8 lanes,
packets are dropped and the test fails.
Check if the relevant ports use 8 lanes, in such case double the size of
the buffer, as the headroom is split half-half.
Cc: Shuah Khan <shuah@kernel.org>
Fixes: bfa804784e ("selftests: mlxsw: Add a PFC test")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/23ff11b7dff031eb04a41c0f5254a2b636cd8ebb.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When tc filters are first added to a net device, the corresponding local
port gets bound to an ACL group in the device. The group contains a list
of ACLs. In turn, each ACL points to a different TCAM region where the
filters are stored. During forwarding, the ACLs are sequentially
evaluated until a match is found.
One reason to place filters in different regions is when they are added
with decreasing priorities and in an alternating order so that two
consecutive filters can never fit in the same region because of their
key usage.
In Spectrum-2 and newer ASICs the firmware started to report that the
maximum number of ACLs in a group is more than 16, but the layout of the
register that configures ACL groups (PAGT) was not updated to account
for that. It is therefore possible to hit stack corruption [1] in the
rare case where more than 16 ACLs in a group are required.
Fix by limiting the maximum ACL group size to the minimum between what
the firmware reports and the maximum ACLs that fit in the PAGT register.
Add a test case to make sure the machine does not crash when this
condition is hit.
[1]
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: mlxsw_sp_acl_tcam_group_update+0x116/0x120
[...]
dump_stack_lvl+0x36/0x50
panic+0x305/0x330
__stack_chk_fail+0x15/0x20
mlxsw_sp_acl_tcam_group_update+0x116/0x120
mlxsw_sp_acl_tcam_group_region_attach+0x69/0x110
mlxsw_sp_acl_tcam_vchunk_get+0x492/0xa20
mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0
mlxsw_sp_acl_rule_add+0x47/0x240
mlxsw_sp_flower_replace+0x1a9/0x1d0
tc_setup_cb_add+0xdc/0x1c0
fl_hw_replace_filter+0x146/0x1f0
fl_change+0xc17/0x1360
tc_new_tfilter+0x472/0xb90
rtnetlink_rcv_msg+0x313/0x3b0
netlink_rcv_skb+0x58/0x100
netlink_unicast+0x244/0x390
netlink_sendmsg+0x1e4/0x440
____sys_sendmsg+0x164/0x260
___sys_sendmsg+0x9a/0xe0
__sys_sendmsg+0x7a/0xc0
do_syscall_64+0x40/0xe0
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Fixes: c3ab435466 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC")
Reported-by: Orel Hagag <orelh@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/2d91c89afba59c22587b444994ae419dbea8d876.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lately, a bug was found when many TC filters are added - at some point,
several bugs are printed to dmesg [1] and the switch is crashed with
segmentation fault.
The issue starts when gen_pool_free() fails because of unexpected
behavior - a try to free memory which is already freed, this leads to BUG()
call which crashes the switch and makes many other bugs.
Trying to track down the unexpected behavior led to a bug in eRP code. The
function mlxsw_sp_acl_erp_table_alloc() gets a pointer to the allocated
index, sets the value and returns an error code. When gen_pool_alloc()
fails it returns address 0, we track it and return -ENOBUFS outside, BUT
the call for gen_pool_alloc() already override the index in erp_table
structure. This is a problem when such allocation is done as part of
table expansion. This is not a new table, which will not be used in case
of allocation failure. We try to expand eRP table and override the
current index (non-zero) with zero. Then, it leads to an unexpected
behavior when address 0 is freed twice. Note that address 0 is valid in
erp_table->base_index and indeed other tables use it.
gen_pool_alloc() fails in case that there is no space left in the
pre-allocated pool, in our case, the pool is limited to
ACL_MAX_ERPT_BANK_SIZE, which is read from hardware. When more than max
erp entries are required, we exceed the limit and return an error, this
error leads to "Failed to migrate vregion" print.
Fix this by changing erp_table->base_index only in case of a successful
allocation.
Add a test case for such a scenario. Without this fix it causes
segmentation fault:
$ TESTS="max_erp_entries_test" ./tc_flower.sh
./tc_flower.sh: line 988: 1560 Segmentation fault tc filter del dev $h2 ingress chain $i protocol ip pref $i handle $j flower &>/dev/null
[1]:
kernel BUG at lib/genalloc.c:508!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 6 PID: 3531 Comm: tc Not tainted 6.7.0-rc5-custom-ga6893f479f5e #1
Hardware name: Mellanox Technologies Ltd. MSN4700/VMOD0010, BIOS 5.11 07/12/2021
RIP: 0010:gen_pool_free_owner+0xc9/0xe0
...
Call Trace:
<TASK>
__mlxsw_sp_acl_erp_table_other_dec+0x70/0xa0 [mlxsw_spectrum]
mlxsw_sp_acl_erp_mask_destroy+0xf5/0x110 [mlxsw_spectrum]
objagg_obj_root_destroy+0x18/0x80 [objagg]
objagg_obj_destroy+0x12c/0x130 [objagg]
mlxsw_sp_acl_erp_mask_put+0x37/0x50 [mlxsw_spectrum]
mlxsw_sp_acl_ctcam_region_entry_remove+0x74/0xa0 [mlxsw_spectrum]
mlxsw_sp_acl_ctcam_entry_del+0x1e/0x40 [mlxsw_spectrum]
mlxsw_sp_acl_tcam_ventry_del+0x78/0xd0 [mlxsw_spectrum]
mlxsw_sp_flower_destroy+0x4d/0x70 [mlxsw_spectrum]
mlxsw_sp_flow_block_cb+0x73/0xb0 [mlxsw_spectrum]
tc_setup_cb_destroy+0xc1/0x180
fl_hw_destroy_filter+0x94/0xc0 [cls_flower]
__fl_delete+0x1ac/0x1c0 [cls_flower]
fl_destroy+0xc2/0x150 [cls_flower]
tcf_proto_destroy+0x1a/0xa0
...
mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion
mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion
Fixes: f465261aa1 ("mlxsw: spectrum_acl: Implement common eRP core")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/4cfca254dfc0e5d283974801a24371c7b6db5989.1705502064.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a followup to commit 03fb8565c8 ("selftests: bonding: add missing
build configs"), add more networking-specific config options which are
needed for bonding tests.
For testing, I used the minimal config generated by virtme-ng and I added
the options in the config file. All bonding tests passed.
Fixes: bbb774d921 ("net: Add tests for bonding and team address list management") # for ipv6
Fixes: 6cbe791c0f ("kselftest: bonding: add num_grat_arp test") # for tc options
Fixes: 222c94ec0a ("selftests: bonding: add tests for ether type changes") # for nlmon
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240116154926.202164-1-bpoirier@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
netdevsim tests aren't very well integrated with kselftest,
which has its advantages and disadvantages. But regardless
of the intended integration - a config file to know what kernel
to build is very useful, add one.
Fixes: fc4c93f145 ("selftests: add basic netdevsim devlink flash testing")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240116154311.1945801-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add feature detector of kernel-side arg:ctx (__arg_ctx) tag support. If
this is detected, libbpf will avoid doing any __arg_ctx-related BTF
rewriting and checks in favor of letting kernel handle this completely.
test_global_funcs/ctx_arg_rewrite subtest is adjusted to do the same
feature detection (albeit in much simpler, though round-about and
inefficient, way), and skip the tests. This is done to still be able to
execute this test on older kernels (like in libbpf CI).
Note, BPF token series ([0]) does a major refactor and code moving of
libbpf-internal feature detection "framework", so to avoid unnecessary
conflicts we keep newly added feature detection stand-alone with ad-hoc
result caching. Once things settle, there will be a small follow up to
re-integrate everything back and move code into its final place in
newly-added (by BPF token series) features.c file.
[0] https://patchwork.kernel.org/project/netdevbpf/list/?series=814209&state=*
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240118033143.3384355-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem changes
for 6.8-rc1.
Other than lots of binder driver changes (as you can see by the merge
conflicts) included in here are:
- lots of iio driver updates and additions
- spmi driver updates
- eeprom driver updates
- firmware driver updates
- ocxl driver updates
- mhi driver updates
- w1 driver updates
- nvmem driver updates
- coresight driver updates
- platform driver remove callback api changes
- tags.sh script updates
- bus_type constant marking cleanups
- lots of other small driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits)
android: removed duplicate linux/errno
uio: Fix use-after-free in uio_open
drivers: soc: xilinx: add check for platform
firmware: xilinx: Export function to use in other module
scripts/tags.sh: remove find_sources
scripts/tags.sh: use -n to test archinclude
scripts/tags.sh: add local annotation
scripts/tags.sh: use more portable -path instead of -wholename
scripts/tags.sh: Update comment (addition of gtags)
firmware: zynqmp: Convert to platform remove callback returning void
firmware: turris-mox-rwtm: Convert to platform remove callback returning void
firmware: stratix10-svc: Convert to platform remove callback returning void
firmware: stratix10-rsu: Convert to platform remove callback returning void
firmware: raspberrypi: Convert to platform remove callback returning void
firmware: qemu_fw_cfg: Convert to platform remove callback returning void
firmware: mtk-adsp-ipc: Convert to platform remove callback returning void
firmware: imx-dsp: Convert to platform remove callback returning void
firmware: coreboot_table: Convert to platform remove callback returning void
firmware: arm_scpi: Convert to platform remove callback returning void
firmware: arm_scmi: Convert to platform remove callback returning void
...
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
Pull RISC-V updates from Palmer Dabbelt:
- Support for many new extensions in hwprobe, along with a handful of
cleanups
- Various cleanups to our page table handling code, so we alwayse use
{READ,WRITE}_ONCE
- Support for the which-cpus flavor of hwprobe
- Support for XIP kernels has been resurrected
* tag 'riscv-for-linus-6.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
riscv: hwprobe: export Zicond extension
riscv: hwprobe: export Zacas ISA extension
riscv: add ISA extension parsing for Zacas
dt-bindings: riscv: add Zacas ISA extension description
riscv: hwprobe: export Ztso ISA extension
riscv: add ISA extension parsing for Ztso
use linux/export.h rather than asm-generic/export.h
riscv: Remove SHADOW_OVERFLOW_STACK_SIZE macro
riscv; fix __user annotation in save_v_state()
riscv: fix __user annotation in traps_misaligned.c
riscv: Select ARCH_WANTS_NO_INSTR
riscv: Remove obsolete rv32_defconfig file
riscv: Allow disabling of BUILTIN_DTB for XIP
riscv: Fixed wrong register in XIP_FIXUP_FLASH_OFFSET macro
riscv: Make XIP bootable again
riscv: Fix set_direct_map_default_noflush() to reset _PAGE_EXEC
riscv: Fix module_alloc() that did not reset the linear mapping permissions
riscv: Fix wrong usage of lm_alias() when splitting a huge linear mapping
riscv: Check if the code to patch lies in the exit section
riscv: Use the same CPU operations for all CPUs
...
Pull misc hotfixes from Andrew Morton:
"For once not mostly MM-related.
17 hotfixes. 10 address post-6.7 issues and the other 7 are cc:stable"
* tag 'mm-hotfixes-stable-2024-01-12-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
userfaultfd: avoid huge_zero_page in UFFDIO_MOVE
MAINTAINERS: add entry for shrinker
selftests: mm: hugepage-vmemmap fails on 64K page size systems
mm/memory_hotplug: fix memmap_on_memory sysfs value retrieval
mailmap: switch email for Tanzir Hasan
mailmap: add old address mappings for Randy
kernel/crash_core.c: make __crash_hotplug_lock static
efi: disable mirror feature during crashkernel
kexec: do syscore_shutdown() in kernel_kexec
mailmap: update entry for Manivannan Sadhasivam
fs/proc/task_mmu: move mmu notification mechanism inside mm lock
mm: zswap: switch maintainers to recently active developers and reviewers
scripts/decode_stacktrace.sh: optionally use LLVM utilities
kasan: avoid resetting aux_lock
lib/Kconfig.debug: disable CONFIG_DEBUG_INFO_BTF for Hexagon
MAINTAINERS: update LTP maintainers
kdump: defer the insertion of crashkernel resources
