Pull scheduler updates from Ingo Molnar:
"The main changes are:
- lockless wakeup support for futexes and IPC message queues
(Davidlohr Bueso, Peter Zijlstra)
- Replace spinlocks with atomics in thread_group_cputimer(), to
improve scalability (Jason Low)
- NUMA balancing improvements (Rik van Riel)
- SCHED_DEADLINE improvements (Wanpeng Li)
- clean up and reorganize preemption helpers (Frederic Weisbecker)
- decouple page fault disabling machinery from the preemption
counter, to improve debuggability and robustness (David
Hildenbrand)
- SCHED_DEADLINE documentation updates (Luca Abeni)
- topology CPU masks cleanups (Bartosz Golaszewski)
- /proc/sched_debug improvements (Srikar Dronamraju)"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (79 commits)
sched/deadline: Remove needless parameter in dl_runtime_exceeded()
sched: Remove superfluous resetting of the p->dl_throttled flag
sched/deadline: Drop duplicate init_sched_dl_class() declaration
sched/deadline: Reduce rq lock contention by eliminating locking of non-feasible target
sched/deadline: Make init_sched_dl_class() __init
sched/deadline: Optimize pull_dl_task()
sched/preempt: Add static_key() to preempt_notifiers
sched/preempt: Fix preempt notifiers documentation about hlist_del() within unsafe iteration
sched/stop_machine: Fix deadlock between multiple stop_two_cpus()
sched/debug: Add sum_sleep_runtime to /proc/<pid>/sched
sched/debug: Replace vruntime with wait_sum in /proc/sched_debug
sched/debug: Properly format runnable tasks in /proc/sched_debug
sched/numa: Only consider less busy nodes as numa balancing destinations
Revert 095bebf61a ("sched/numa: Do not move past the balance point if unbalanced")
sched/fair: Prevent throttling in early pick_next_task_fair()
preempt: Reorganize the notrace definitions a bit
preempt: Use preempt_schedule_context() as the official tracing preemption point
sched: Make preempt_schedule_context() function-tracing safe
x86: Remove cpu_sibling_mask() and cpu_core_mask()
x86: Replace cpu_**_mask() with topology_**_cpumask()
...
Pull perf fixes from Ingo Molnar:
"These are the left over fixes from the v4.1 cycle"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Fix build breakage if prefix= is specified
perf/x86: Honor the architectural performance monitoring version
perf/x86/intel: Fix PMI handling for Intel PT
perf/x86/intel/bts: Fix DS area sharing with x86_pmu events
perf/x86: Add more Broadwell model numbers
perf: Fix ring_buffer_attach() RCU sync, again
Pull perf updates from Ingo Molnar:
"Kernel side changes mostly consist of work on x86 PMU drivers:
- x86 Intel PT (hardware CPU tracer) improvements (Alexander
Shishkin)
- x86 Intel CQM (cache quality monitoring) improvements (Thomas
Gleixner)
- x86 Intel PEBSv3 support (Peter Zijlstra)
- x86 Intel PEBS interrupt batching support for lower overhead
sampling (Zheng Yan, Kan Liang)
- x86 PMU scheduler fixes and improvements (Peter Zijlstra)
There's too many tooling improvements to list them all - here are a
few select highlights:
'perf bench':
- Introduce new 'perf bench futex' benchmark: 'wake-parallel', to
measure parallel waker threads generating contention for kernel
locks (hb->lock). (Davidlohr Bueso)
'perf top', 'perf report':
- Allow disabling/enabling events dynamicaly in 'perf top':
a 'perf top' session can instantly become a 'perf report'
one, i.e. going from dynamic analysis to a static one,
returning to a dynamic one is possible, to toogle the
modes, just press 'f' to 'freeze/unfreeze' the sampling. (Arnaldo Carvalho de Melo)
- Make Ctrl-C stop processing on TUI, allowing interrupting the load of big
perf.data files (Namhyung Kim)
'perf probe': (Masami Hiramatsu)
- Support glob wildcards for function name
- Support $params special probe argument: Collect all function arguments
- Make --line checks validate C-style function name.
- Add --no-inlines option to avoid searching inline functions
- Greatly speed up 'perf probe --list' by caching debuginfo.
- Improve --filter support for 'perf probe', allowing using its arguments
on other commands, as --add, --del, etc.
'perf sched':
- Add option in 'perf sched' to merge like comms to lat output (Josef Bacik)
Plus tons of infrastructure work - in particular preparation for
upcoming threaded perf report support, but also lots of other work -
and fixes and other improvements. See (much) more details in the
shortlog and in the git log"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (305 commits)
perf tools: Configurable per thread proc map processing time out
perf tools: Add time out to force stop proc map processing
perf report: Fix sort__sym_cmp to also compare end of symbol
perf hists browser: React to unassigned hotkey pressing
perf top: Tell the user how to unfreeze events after pressing 'f'
perf hists browser: Honour the help line provided by builtin-{top,report}.c
perf hists browser: Do not exit when 'f' is pressed in 'report' mode
perf top: Replace CTRL+z with 'f' as hotkey for enable/disable events
perf annotate: Rename source_line_percent to source_line_samples
perf annotate: Display total number of samples with --show-total-period
perf tools: Ensure thread-stack is flushed
perf top: Allow disabling/enabling events dynamicly
perf evlist: Add toggle_enable() method
perf trace: Fix race condition at the end of started workloads
perf probe: Speed up perf probe --list by caching debuginfo
perf probe: Show usage even if the last event is skipped
perf tools: Move libtraceevent dynamic list to separated LDFLAGS variable
perf tools: Fix a problem when opening old perf.data with different byte order
perf tools: Ignore .config-detected in .gitignore
perf probe: Fix to return error if no probe is added
...
Pull locking updates from Ingo Molnar:
"The main changes are:
- 'qspinlock' support, enabled on x86: queued spinlocks - these are
now the spinlock variant used by x86 as they outperform ticket
spinlocks in every category. (Waiman Long)
- 'pvqspinlock' support on x86: paravirtualized variant of queued
spinlocks. (Waiman Long, Peter Zijlstra)
- 'qrwlock' support, enabled on x86: queued rwlocks. Similar to
queued spinlocks, they are now the variant used by x86:
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
- various lockdep fixlets
- various locking primitives cleanups, further WRITE_ONCE()
propagation"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
locking/lockdep: Remove hard coded array size dependency
locking/qrwlock: Don't contend with readers when setting _QW_WAITING
lockdep: Do not break user-visible string
locking/arch: Rename set_mb() to smp_store_mb()
locking/arch: Add WRITE_ONCE() to set_mb()
rtmutex: Warn if trylock is called from hard/softirq context
arch: Remove __ARCH_HAVE_CMPXCHG
locking/rtmutex: Drop usage of __HAVE_ARCH_CMPXCHG
locking/qrwlock: Rename QUEUE_RWLOCK to QUEUED_RWLOCKS
locking/pvqspinlock: Rename QUEUED_SPINLOCK to QUEUED_SPINLOCKS
locking/pvqspinlock: Replace xchg() by the more descriptive set_mb()
locking/pvqspinlock, x86: Enable PV qspinlock for Xen
locking/pvqspinlock, x86: Enable PV qspinlock for KVM
locking/pvqspinlock, x86: Implement the paravirt qspinlock call patching
locking/pvqspinlock: Implement simple paravirt support for the qspinlock
locking/qspinlock: Revert to test-and-set on hypervisors
locking/qspinlock: Use a simple write to grab the lock
locking/qspinlock: Optimize for smaller NR_CPUS
locking/qspinlock: Extract out code snippets for the next patch
locking/qspinlock: Add pending bit
...
Pull RCU updates from Ingo Molnar:
- Continued initialization/Kconfig updates: hide most Kconfig options
from unsuspecting users.
There's now a single high level configuration option:
*
* RCU Subsystem
*
Make expert-level adjustments to RCU configuration (RCU_EXPERT) [N/y/?] (NEW)
Which if answered in the negative, leaves us with a single
interactive configuration option:
Offload RCU callback processing from boot-selected CPUs (RCU_NOCB_CPU) [N/y/?] (NEW)
All the rest of the RCU options are configured automatically. Later
on we'll remove this single leftover configuration option as well.
- Remove all uses of RCU-protected array indexes: replace the
rcu_[access|dereference]_index_check() APIs with READ_ONCE() and
rcu_lockdep_assert()
- RCU CPU-hotplug cleanups
- Updates to Tiny RCU: a race fix and further code shrinkage.
- RCU torture-testing updates: fixes, speedups, cleanups and
documentation updates.
- Miscellaneous fixes
- Documentation updates
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
rcutorture: Allow repetition factors in Kconfig-fragment lists
rcutorture: Display "make oldconfig" errors
rcutorture: Update TREE_RCU-kconfig.txt
rcutorture: Make rcutorture scripts force RCU_EXPERT
rcutorture: Update configuration fragments for rcutree.rcu_fanout_exact
rcutorture: TASKS_RCU set directly, so don't explicitly set it
rcutorture: Test SRCU cleanup code path
rcutorture: Replace barriers with smp_store_release() and smp_load_acquire()
locktorture: Change longdelay_us to longdelay_ms
rcutorture: Allow negative values of nreaders to oversubscribe
rcutorture: Exchange TREE03 and TREE08 NR_CPUS, speed up CPU hotplug
rcutorture: Exchange TREE03 and TREE04 geometries
locktorture: fix deadlock in 'rw_lock_irq' type
rcu: Correctly handle non-empty Tiny RCU callback list with none ready
rcutorture: Test both RCU-sched and RCU-bh for Tiny RCU
rcu: Further shrink Tiny RCU by making empty functions static inlines
rcu: Conditionally compile RCU's eqs warnings
rcu: Remove prompt for RCU implementation
rcu: Make RCU able to tolerate undefined CONFIG_RCU_KTHREAD_PRIO
rcu: Make RCU able to tolerate undefined CONFIG_RCU_FANOUT_LEAF
...
Jiri reported a machine stuck in multi_cpu_stop() with
migrate_swap_stop() as function and with the following src,dst cpu
pairs: {11, 4} {13, 11} { 4, 13}
4 11 13
cpuM: queue(4 ,13)
*Ma
cpuN: queue(13,11)
*N Na
*M Mb
cpuO: queue(11, 4)
*O Oa
*Nb
*Ob
Where *X denotes the cpu running the queueing of cpu-X and X[ab] denotes
the first/second queued work.
You'll observe the top of the workqueue for each cpu: 4,11,13 to be work
from cpus: M, O, N resp. IOW. deadlock.
Do away with the queueing trickery and introduce lg_double_lock() to
lock both CPUs and fully serialize the stop_two_cpus() callers instead
of the partial (and buggy) serialization we have now.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150605153023.GH19282@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The current cmpxchg() loop in setting the _QW_WAITING flag for writers
in queue_write_lock_slowpath() will contend with incoming readers
causing possibly extra cmpxchg() operations that are wasteful. This
patch changes the code to do a byte cmpxchg() to eliminate contention
with new readers.
A multithreaded microbenchmark running 5M read_lock/write_lock loop
on a 8-socket 80-core Westmere-EX machine running 4.0 based kernel
with the qspinlock patch have the following execution times (in ms)
with and without the patch:
With R:W ratio = 5:1
Threads w/o patch with patch % change
------- --------- ---------- --------
2 990 895 -9.6%
3 2136 1912 -10.5%
4 3166 2830 -10.6%
5 3953 3629 -8.2%
6 4628 4405 -4.8%
7 5344 5197 -2.8%
8 6065 6004 -1.0%
9 6826 6811 -0.2%
10 7599 7599 0.0%
15 9757 9766 +0.1%
20 13767 13817 +0.4%
With small number of contending threads, this patch can improve
locking performance by up to 10%. With more contending threads,
however, the gain diminishes.
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1433863153-30722-3-git-send-email-Waiman.Long@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull tracing filter fix from Steven Rostedt:
"Vince Weaver reported a warning when he added perf event filters into
his fuzzer tests. There's a missing check of balanced operations when
parenthesis are used, and this triggers a WARN_ON() and when reading
the failure, the filter reports no failure occurred.
The operands were not being checked if they match, this adds that"
* tag 'trace-fix-filter-4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Have filter check for balanced ops
When the following filter is used it causes a warning to trigger:
# cd /sys/kernel/debug/tracing
# echo "((dev==1)blocks==2)" > events/ext4/ext4_truncate_exit/filter
-bash: echo: write error: Invalid argument
# cat events/ext4/ext4_truncate_exit/filter
((dev==1)blocks==2)
^
parse_error: No error
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1223 at kernel/trace/trace_events_filter.c:1640 replace_preds+0x3c5/0x990()
Modules linked in: bnep lockd grace bluetooth ...
CPU: 3 PID: 1223 Comm: bash Tainted: G W 4.1.0-rc3-test+ #450
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
0000000000000668 ffff8800c106bc98 ffffffff816ed4f9 ffff88011ead0cf0
0000000000000000 ffff8800c106bcd8 ffffffff8107fb07 ffffffff8136b46c
ffff8800c7d81d48 ffff8800d4c2bc00 ffff8800d4d4f920 00000000ffffffea
Call Trace:
[<ffffffff816ed4f9>] dump_stack+0x4c/0x6e
[<ffffffff8107fb07>] warn_slowpath_common+0x97/0xe0
[<ffffffff8136b46c>] ? _kstrtoull+0x2c/0x80
[<ffffffff8107fb6a>] warn_slowpath_null+0x1a/0x20
[<ffffffff81159065>] replace_preds+0x3c5/0x990
[<ffffffff811596b2>] create_filter+0x82/0xb0
[<ffffffff81159944>] apply_event_filter+0xd4/0x180
[<ffffffff81152bbf>] event_filter_write+0x8f/0x120
[<ffffffff811db2a8>] __vfs_write+0x28/0xe0
[<ffffffff811dda43>] ? __sb_start_write+0x53/0xf0
[<ffffffff812e51e0>] ? security_file_permission+0x30/0xc0
[<ffffffff811dc408>] vfs_write+0xb8/0x1b0
[<ffffffff811dc72f>] SyS_write+0x4f/0xb0
[<ffffffff816f5217>] system_call_fastpath+0x12/0x6a
---[ end trace e11028bd95818dcd ]---
Worse yet, reading the error message (the filter again) it says that
there was no error, when there clearly was. The issue is that the
code that checks the input does not check for balanced ops. That is,
having an op between a closed parenthesis and the next token.
This would only cause a warning, and fail out before doing any real
harm, but it should still not caues a warning, and the error reported
should work:
# cd /sys/kernel/debug/tracing
# echo "((dev==1)blocks==2)" > events/ext4/ext4_truncate_exit/filter
-bash: echo: write error: Invalid argument
# cat events/ext4/ext4_truncate_exit/filter
((dev==1)blocks==2)
^
parse_error: Meaningless filter expression
And give no kernel warning.
Link: http://lkml.kernel.org/r/20150615175025.7e809215@gandalf.local.home
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: stable@vger.kernel.org # 2.6.31+
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull lockdep fix from Ingo Molnar:
"A lockdep/modules unload race fix that can oops"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Fix a race between /proc/lock_stat and module unload
Pull ring buffer benchmark buglet fix from Steven Rostedt:
"Wang Long fixed a minor bug in the module parameter for the ring
buffer benchmark, where the produce_fifo was being ignored and the
producer thread's priority was being set with the consumer_fifo
parameter"
* tag 'trace-rb-bm-fix-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer-benchmark: Fix the wrong sched_priority of producer
Jovi Zhangwei reported the following problem
Below kernel vm bug can be triggered by tcpdump which mmaped a lot of pages
with GFP_COMP flag.
[Mon May 25 05:29:33 2015] page:ffffea0015414000 count:66 mapcount:1 mapping: (null) index:0x0
[Mon May 25 05:29:33 2015] flags: 0x20047580004000(head)
[Mon May 25 05:29:33 2015] page dumped because: VM_BUG_ON_PAGE(compound_order(page) && !PageTransHuge(page))
[Mon May 25 05:29:33 2015] ------------[ cut here ]------------
[Mon May 25 05:29:33 2015] kernel BUG at mm/migrate.c:1661!
[Mon May 25 05:29:33 2015] invalid opcode: 0000 [#1] SMP
In this case it was triggered by running tcpdump but it's not necessary
reproducible on all systems.
sudo tcpdump -i bond0.100 'tcp port 4242' -c 100000000000 -w 4242.pcap
Compound pages cannot be migrated and it was not expected that such pages
be marked for NUMA balancing. This did not take into account that drivers
such as net/packet/af_packet.c may insert compound pages into userspace
with vm_insert_page. This patch tells the NUMA balancing protection
scanner to skip all VM_MIXEDMAP mappings which avoids the possibility that
compound pages are marked for migration.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reported-by: Jovi Zhangwei <jovi@cloudflare.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the PEBS interrupt threshold is larger than one record and the
machine supports multiple PEBS events, the records of these events are
mixed up and we need to demultiplex them.
Demuxing the records is hard because the hardware is deficient. The
hardware has two issues that, when combined, create impossible
scenarios to demux.
The first issue is that the 'status' field of the PEBS record is a copy
of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a
problem let us first describe the regular PEBS cycle:
A) the CTRn value reaches 0:
- the corresponding bit in GLOBAL_STATUS gets set
- we start arming the hardware assist
< some unspecified amount of time later -- this could cover multiple
events of interest >
B) the hardware assist is armed, any next event will trigger it
C) a matching event happens:
- the hardware assist triggers and generates a PEBS record
this includes a copy of GLOBAL_STATUS at this moment
- if we auto-reload we (re)set CTRn
- we clear the relevant bit in GLOBAL_STATUS
Now consider the following chain of events:
A0, B0, A1, C0
The event generated for counter 0 will include a status with counter 1
set, even though its not at all related to the record. A similar thing
can happen with a !PEBS event if it just happens to overflow at the
right moment.
The second issue is that the hardware will only emit one record for two
or more counters if the event that triggers the assist is 'close'. The
'close' can be several cycles. In some cases even the complete assist,
if the event is something that doesn't need retirement.
For instance, consider this chain of events:
A0, B0, A1, B1, C01
Where C01 is an event that triggers both hardware assists, we will
generate but a single record, but again with both counters listed in the
status field.
This time the record pertains to both events.
Note that these two cases are different but undistinguishable with the
data as generated. Therefore demuxing records with multiple PEBS bits
(we can safely ignore status bits for !PEBS counters) is impossible.
Furthermore we cannot emit the record to both events because that might
cause a data leak -- the events might not have the same privileges -- so
what this patch does is discard such events.
The assumption/hope is that such discards will be rare.
Here lists some possible ways you may get high discard rate.
- when you count the same thing multiple times. But it is not a useful
configuration.
- you can be unfortunate if you measure with a userspace only PEBS
event along with either a kernel or unrestricted PEBS event. Imagine
the event triggering and setting the overflow flag right before
entering the kernel. Then all kernel side events will end up with
multiple bits set.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
[ Changelog improvements. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Changeset a43455a1d5 ("sched/numa: Ensure task_numa_migrate() checks
the preferred node") fixes an issue where workloads would never
converge on a fully loaded (or overloaded) system.
However, it introduces a regression on less than fully loaded systems,
where workloads converge on a few NUMA nodes, instead of properly
staying spread out across the whole system. This leads to a reduction
in available memory bandwidth, and usable CPU cache, with predictable
performance problems.
The root cause appears to be an interaction between the load balancer
and NUMA balancing, where the short term load represented by the load
balancer differs from the long term load the NUMA balancing code would
like to base its decisions on.
Simply reverting a43455a1d5 would re-introduce the non-convergence
of workloads on fully loaded systems, so that is not a good option. As
an aside, the check done before a43455a1d5 only applied to a task's
preferred node, not to other candidate nodes in the system, so the
converge-on-too-few-nodes problem still happens, just to a lesser
degree.
Instead, try to compensate for the impedance mismatch between the load
balancer and NUMA balancing by only ever considering a lesser loaded
node as a destination for NUMA balancing, regardless of whether the
task is trying to move to the preferred node, or to another node.
This patch also addresses the issue that a system with a single
runnable thread would never migrate that thread to near its memory,
introduced by 095bebf61a ("sched/numa: Do not move past the balance
point if unbalanced").
A test where the main thread creates a large memory area, and spawns a
worker thread to iterate over the memory (placed on another node by
select_task_rq_fair), after which the main thread goes to sleep and
waits for the worker thread to loop over all the memory now sees the
worker thread migrated to where the memory is, instead of having all
the memory migrated over like before.
Jirka has run a number of performance tests on several systems: single
instance SpecJBB 2005 performance is 7-15% higher on a 4 node system,
with higher gains on systems with more cores per socket.
Multi-instance SpecJBB 2005 (one per node), linpack, and stream see
little or no changes with the revert of 095bebf61a and this patch.
Reported-by: Artem Bityutski <dedekind1@gmail.com>
Reported-by: Jirka Hladky <jhladky@redhat.com>
Tested-by: Jirka Hladky <jhladky@redhat.com>
Tested-by: Artem Bityutskiy <dedekind1@gmail.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150528095249.3083ade0@annuminas.surriel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The optimized task selection logic optimistically selects a new task
to run without first doing a full put_prev_task(). This is so that we
can avoid a put/set on the common ancestors of the old and new task.
Similarly, we should only call check_cfs_rq_runtime() to throttle
eligible groups if they're part of the common ancestry, otherwise it
is possible to end up with no eligible task in the simple task
selection.
Imagine:
/root
/prev /next
/A /B
If our optimistic selection ends up throttling /next, we goto simple
and our put_prev_task() ends up throttling /prev, after which we're
going to bug out in set_next_entity() because there aren't any tasks
left.
Avoid this scenario by only throttling common ancestors.
Reported-by: Mohammed Naser <mnaser@vexxhost.com>
Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Ben Segall <bsegall@google.com>
[ munged Changelog ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: pjt@google.com
Fixes: 678d5718d8 ("sched/fair: Optimize cgroup pick_next_task_fair()")
Link: http://lkml.kernel.org/r/xm26wq1oswoq.fsf@sword-of-the-dawn.mtv.corp.google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since function tracing disables preemption, it needs a safe preemption
point to use when preemption is re-enabled without worrying about tracing
recursion. Ie: to avoid tracing recursion, that preemption point can't
be traced (use of notrace qualifier) and it can't call any traceable
function before that preemption point disables preemption itself, which
disarms the recursion.
preempt_schedule() was fine until commit:
b30f0e3ffe ("sched/preempt: Optimize preemption operations on __schedule() callers")
because PREEMPT_ACTIVE (which has the property to disable preemption
and this disarm tracing preemption recursion) was set before calling
any further function.
But that commit introduced the use of preempt_count_add/sub() functions
to set PREEMPT_ACTIVE and because these functions are called before
preemption gets a chance to be disabled, we have a tracing recursion.
preempt_schedule_context() is one of the possible preemption functions
used by tracing. Its special purpose is to avoid tracing recursion
against context tracking. Lets enhance this function to become more
generally tracing safe by disabling preemption with raw accessors, such
that no function is called before preemption gets disabled and disarm
the tracing recursion.
This function is going to become the specific tracing-safe preemption
point in further commit.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1433432349-1021-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The lock_class iteration of /proc/lock_stat is not serialized against
the lockdep_free_key_range() call from module unload.
Therefore it can happen that we find a class of which ->name/->key are
no longer valid.
There is a further bug in zap_class() that left ->name dangling. Cure
this. Use RCU_INIT_POINTER() because NULL.
Since lockdep_free_key_range() is rcu_sched serialized, we can read
both ->name and ->key under rcu_read_lock_sched() (preempt-disable)
and be assured that if we observe a !NULL value it stays safe to use
for as long as we hold that lock.
If we observe both NULL, skip the entry.
Reported-by: Jerome Marchand <jmarchan@redhat.com>
Tested-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150602105013.GS3644@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull perf fixes from Ingo Molnar:
"The biggest chunk of the changes are two regression fixes: a HT
workaround fix and an event-group scheduling fix. It's been verified
with 5 days of fuzzer testing.
Other fixes:
- eBPF fix
- a BIOS breakage detection fix
- PMU driver fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/pt: Fix a refactoring bug
perf/x86: Tweak broken BIOS rules during check_hw_exists()
perf/x86/intel/pt: Untangle pt_buffer_reset_markers()
perf: Disallow sparse AUX allocations for non-SG PMUs in overwrite mode
perf/x86: Improve HT workaround GP counter constraint
perf/x86: Fix event/group validation
perf: Fix race in BPF program unregister
In the functions compat_get_bitmap() and compat_put_bitmap() the
variable nr_compat_longs stores how many compat_ulong_t words should be
copied in a loop.
The copy loop itself is this:
if (nr_compat_longs-- > 0) {
if (__get_user(um, umask)) return -EFAULT;
} else {
um = 0;
}
Since nr_compat_longs gets unconditionally decremented in each loop and
since it's type is unsigned this could theoretically lead to out of
bounds accesses to userspace if nr_compat_longs wraps around to
(unsigned)(-1).
Although the callers currently do not trigger out-of-bounds accesses, we
should better implement the loop in a safe way to completely avoid such
warp-arounds.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Remove the line-break in the user-visible string and add the
missing space in this error message:
WARNING: lockdep init error! lock-(console_sem).lock was acquiredbefore lockdep_init
Also:
- don't yell, it's just a debug warning
- denote references to function calls with '()'
- standardize the lock name quoting
- and finish the sentence.
The result:
WARNING: lockdep init error: lock '(console_sem).lock' was acquired before lockdep_init().
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150602133827.GD19887@pd.tnic
[ Added a few more stylistic tweaks to the error message. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull RCU changes from Paul E. McKenney:
- Initialization/Kconfig updates: hide most Kconfig options from unsuspecting users.
There's now a single high level configuration option:
*
* RCU Subsystem
*
Make expert-level adjustments to RCU configuration (RCU_EXPERT) [N/y/?] (NEW)
Which if answered in the negative, leaves us with a single interactive
configuration option:
Offload RCU callback processing from boot-selected CPUs (RCU_NOCB_CPU) [N/y/?] (NEW)
All the rest of the RCU options are configured automatically.
- Remove all uses of RCU-protected array indexes: replace the
rcu_[access|dereference]_index_check() APIs with READ_ONCE() and rcu_lockdep_assert().
- RCU CPU-hotplug cleanups.
- Updates to Tiny RCU: a race fix and further code shrinkage.
- RCU torture-testing updates: fixes, speedups, cleanups and
documentation updates.
- Miscellaneous fixes.
- Documentation updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull fixes for cpumask and modules from Rusty Russell:
"** NOW WITH TESTING! **
Two fixes which got lost in my recent distraction. One is a weird
cpumask function which needed to be rewritten, the other is a module
bug which is cc:stable"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
cpumask_set_cpu_local_first => cpumask_local_spread, lament
module: Call module notifier on failure after complete_formation()
The current rcutorture testing does not do any cleanup operations.
This works because the srcu_struct is statically allocated, but it
does represent a memory leak of the associated dynamically allocated
->per_cpu_ref per-CPU variables. However, rcutorture currently uses
a statically allocated srcu_struct, which cannot legally be passed to
cleanup_srcu_struct(). Therefore, this commit adds a second form
of srcu (called srcud) that dynamically allocates and frees the
associated per-CPU variables. This commit also adds a ->cleanup()
member to rcu_torture_ops that is invoked at the end of the test,
after ->cb_barriers(). This ->cleanup() pointer is NULL for all
existing tests, and thus only used for scrud. Finally, the SRCU-P
torture-test configuration selects scrud instead of srcu, with SRCU-N
continuing to use srcu, thereby testing both static and dynamic
srcu_struct structures.
Reported-by: "Ahmed, Iftekhar" <ahmedi@onid.oregonstate.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The rcutorture.c file uses several explicit memory barriers that can
easily be converted to smp_store_release() and smp_load_acquire(), which
improves maintainability and also improves performance a bit.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The locktorture long delays are in milliseconds rather than microseconds,
so this commit changes the name of the corresponding variable from
longdelay_us to longdelay_ms.
Reported-by: Ben Goodwyn <bgoodwyn@softnas.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
By default, with rcutorture.nreaders equal to -1, rcutorture provisions
N-1 reader kthreads, where N is the number of CPUs. This avoids
rcutorture-induced stalls, but also avoids heavier levels of torture.
This commit therefore allows negative values of rcutorture.nreaders
to specify larger numbers of reader kthreads, so that for example
rcutorture.nreaders=-2 provisions N kthreads and rcutorture.nreaders=-5
provisions N+3 kthreads.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Update documentation, as suggested by Josh Triplett. ]
torture_rwlock_read_unlock_irq() must use read_unlock_irqrestore()
instead of write_unlock_irqrestore().
Use read_unlock_irqrestore() instead of write_unlock_irqrestore().
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
If, at the time __rcu_process_callbacks() is invoked, there are callbacks
in Tiny RCU's callback list, but none of them are ready to be invoked,
the current list-management code will knit the non-ready callbacks out
of the list. This can result in hangs and possibly worse. This commit
therefore inserts a check for there being no callbacks that can be
invoked immediately.
This bug is unlikely to occur -- you have to get a new callback between
the time rcu_sched_qs() or rcu_bh_qs() was called, but before we get to
__rcu_process_callbacks(). It was detected by the addition of RCU-bh
testing to rcutorture, which in turn was instigated by Iftekhar Ahmed's
mutation testing. Although this bug was made much more likely by
915e8a4fe4 (rcu: Remove fastpath from __rcu_process_callbacks()), this
did not cause the bug, but rather made it much more probable. That
said, it takes more than 40 hours of rcutorture testing, on average,
for this bug to appear, so this fix cannot be considered an emergency.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The Tiny RCU counterparts to rcu_idle_enter(), rcu_idle_exit(),
rcu_irq_enter(), and rcu_irq_exit() are empty functions, but each has
EXPORT_SYMBOL_GPL(), which needlessly consumes extra memory, especially
in kernels built with module support. This commit therefore moves these
functions to static inlines in rcutiny.h, removing the need for exports.
This won't affect the size of the tiniest kernels, which are likely
built without module support, but might help semi-tiny kernels that
might include module support.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit applies some warning-omission micro-optimizations to RCU's
various extended-quiescent-state functions, which are on the kernel/user
hotpath for CONFIG_NO_HZ_FULL=y.
Reported-by: Rik van Riel <riel@redhat.com>
Reported by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit updates the initialization of the kthread_prio boot parameter
so that RCU will build even when CONFIG_RCU_KTHREAD_PRIO is undefined.
The kthread_prio boot parameter is set to CONFIG_RCU_KTHREAD_PRIO if
that is defined, otherwise to 1 if CONFIG_RCU_BOOST is defined and
to zero otherwise. This commit then makes CONFIG_RCU_KTHREAD_PRIO
depend on CONFIG_RCU_EXPERT, so that Kconfig users won't be asked about
CONFIG_RCU_KTHREAD_PRIO unless they want to be.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
This commit introduces an RCU_FANOUT_LEAF C-preprocessor macro so
that RCU will build even when CONFIG_RCU_FANOUT_LEAF is undefined.
The RCU_FANOUT_LEAF macro is set to the value of CONFIG_RCU_FANOUT_LEAF
when defined, otherwise it is set to 32 for 32-bit systems and 64 for
64-bit systems. This commit then makes CONFIG_RCU_FANOUT_LEAF depend
on CONFIG_RCU_EXPERT, so that Kconfig users won't be asked about
CONFIG_RCU_FANOUT_LEAF unless they want to be.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
