Pull networking fixes from Paolo Abeni:
"Including fixes from bpf.
Relatively calm week, likely due to public holiday in most places. No
known outstanding regressions.
Current release - regressions:
- rxrpc: fix wrong alignmask in __page_frag_alloc_align()
- eth: e1000e: change usleep_range to udelay in PHY mdic access
Previous releases - regressions:
- gro: fix udp bad offset in socket lookup
- bpf: fix incorrect runtime stat for arm64
- tipc: fix UAF in error path
- netfs: fix a potential infinite loop in extract_user_to_sg()
- eth: ice: ensure the copied buf is NUL terminated
- eth: qeth: fix kernel panic after setting hsuid
Previous releases - always broken:
- bpf:
- verifier: prevent userspace memory access
- xdp: use flags field to disambiguate broadcast redirect
- bridge: fix multicast-to-unicast with fraglist GSO
- mptcp: ensure snd_nxt is properly initialized on connect
- nsh: fix outer header access in nsh_gso_segment().
- eth: bcmgenet: fix racing registers access
- eth: vxlan: fix stats counters.
Misc:
- a bunch of MAINTAINERS file updates"
* tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
MAINTAINERS: mark MYRICOM MYRI-10G as Orphan
MAINTAINERS: remove Ariel Elior
net: gro: add flush check in udp_gro_receive_segment
net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb
ipv4: Fix uninit-value access in __ip_make_skb()
s390/qeth: Fix kernel panic after setting hsuid
vxlan: Pull inner IP header in vxlan_rcv().
tipc: fix a possible memleak in tipc_buf_append
tipc: fix UAF in error path
rxrpc: Clients must accept conn from any address
net: core: reject skb_copy(_expand) for fraglist GSO skbs
net: bridge: fix multicast-to-unicast with fraglist GSO
mptcp: ensure snd_nxt is properly initialized on connect
e1000e: change usleep_range to udelay in PHY mdic access
net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341
cxgb4: Properly lock TX queue for the selftest.
rxrpc: Fix using alignmask being zero for __page_frag_alloc_align()
vxlan: Add missing VNI filter counter update in arp_reduce().
vxlan: Fix racy device stats updates.
net: qede: use return from qede_parse_actions()
...
Pull workqueue fixes from Tejun Heo:
"Two doc update patches and the following three fixes:
- On single node systems, the default pool is used but the
node_nr_active for the default pool was set to min_active. This
effectively limited the max concurrency of unbound pools on single
node systems to 8 causing performance regressions on some
workloads. Fixed by setting the default pool's node_nr_active to
max_active.
- wq_update_node_max_active() could trigger divide-by-zero if the
intersection between the allowed CPUs for an unbound workqueue and
online CPUs becomes empty.
- When kick_pool() was trying to repatriate a worker to a CPU in its
pod by setting task->wake_cpu, it didn't consider whether the CPU
being selected is online or not which obviously can lead to
subobtimal behaviors. On s390, this triggered a crash in arch code.
The workqueue patch removes the gross misbehavior but doesn't fix
the crash completely as there's a race window in which CPUs can go
down after wake_cpu is set. Need to decide whether the fix should
be on the core or arch side"
* tag 'wq-for-6.9-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Fix divide error in wq_update_node_max_active()
workqueue: The default node_nr_active should have its max set to max_active
workqueue: Fix selection of wake_cpu in kick_pool()
docs/zh_CN: core-api: Update translation of workqueue.rst to 6.9-rc1
Documentation/core-api: Update events_freezable_power references.
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-04-29
We've added 147 non-merge commits during the last 32 day(s) which contain
a total of 158 files changed, 9400 insertions(+), 2213 deletions(-).
The main changes are:
1) Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86 BPF JIT. This allows
inlining per-CPU array and hashmap lookups
and the bpf_get_smp_processor_id() helper, from Andrii Nakryiko.
2) Add BPF link support for sk_msg and sk_skb programs, from Yonghong Song.
3) Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction,
from Alexei Starovoitov.
4) Add support for passing mark with bpf_fib_lookup helper,
from Anton Protopopov.
5) Add a new bpf_wq API for deferring events and refactor sleepable
bpf_timer code to keep common code where possible,
from Benjamin Tissoires.
6) Fix BPF_PROG_TEST_RUN infra with regards to bpf_dummy_struct_ops programs
to check when NULL is passed for non-NULLable parameters,
from Eduard Zingerman.
7) Harden the BPF verifier's and/or/xor value tracking,
from Harishankar Vishwanathan.
8) Introduce crypto kfuncs to make BPF programs able to utilize the kernel
crypto subsystem, from Vadim Fedorenko.
9) Various improvements to the BPF instruction set standardization doc,
from Dave Thaler.
10) Extend libbpf APIs to partially consume items from the BPF ringbuffer,
from Andrea Righi.
11) Bigger batch of BPF selftests refactoring to use common network helpers
and to drop duplicate code, from Geliang Tang.
12) Support bpf_tail_call_static() helper for BPF programs with GCC 13,
from Jose E. Marchesi.
13) Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled,
from Kumar Kartikeya Dwivedi.
14) Allow invoking BPF kfuncs from BPF_PROG_TYPE_SYSCALL programs,
from David Vernet.
15) Extend the BPF verifier to allow different input maps for a given
bpf_for_each_map_elem() helper call in a BPF program, from Philo Lu.
16) Add support for PROBE_MEM32 and bpf_addr_space_cast instructions
for riscv64 and arm64 JITs to enable BPF Arena, from Puranjay Mohan.
17) Shut up a false-positive KMSAN splat in interpreter mode by unpoison
the stack memory, from Martin KaFai Lau.
18) Improve xsk selftest coverage with new tests on maximum and minimum
hardware ring size configurations, from Tushar Vyavahare.
19) Various ReST man pages fixes as well as documentation and bash completion
improvements for bpftool, from Rameez Rehman & Quentin Monnet.
20) Fix libbpf with regards to dumping subsequent char arrays,
from Quentin Deslandes.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (147 commits)
bpf, docs: Clarify PC use in instruction-set.rst
bpf_helpers.h: Define bpf_tail_call_static when building with GCC
bpf, docs: Add introduction for use in the ISA Internet Draft
selftests/bpf: extend BPF_SOCK_OPS_RTT_CB test for srtt and mrtt_us
bpf: add mrtt and srtt as BPF_SOCK_OPS_RTT_CB args
selftests/bpf: dummy_st_ops should reject 0 for non-nullable params
bpf: check bpf_dummy_struct_ops program params for test runs
selftests/bpf: do not pass NULL for non-nullable params in dummy_st_ops
selftests/bpf: adjust dummy_st_ops_success to detect additional error
bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable
selftests/bpf: Add ring_buffer__consume_n test.
bpf: Add bpf_guard_preempt() convenience macro
selftests: bpf: crypto: add benchmark for crypto functions
selftests: bpf: crypto skcipher algo selftests
bpf: crypto: add skcipher to bpf crypto
bpf: make common crypto API for TC/XDP programs
bpf: update the comment for BTF_FIELDS_MAX
selftests/bpf: Fix wq test.
selftests/bpf: Use make_sockaddr in test_sock_addr
selftests/bpf: Use connect_to_addr in test_sock_addr
...
====================
Link: https://lore.kernel.org/r/20240429131657.19423-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull scheduler fixes from Ingo Molnar:
- Fix EEVDF corner cases
- Fix two nohz_full= related bugs that can cause boot crashes
and warnings
* tag 'sched-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/isolation: Fix boot crash when maxcpus < first housekeeping CPU
sched/isolation: Prevent boot crash when the boot CPU is nohz_full
sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf()
sched/eevdf: Fix miscalculation in reweight_entity() when se is not curr
sched/eevdf: Always update V if se->on_rq when reweighting
Pull x86 fixes from Ingo Molnar:
- Make the CPU_MITIGATIONS=n interaction with conflicting
mitigation-enabling boot parameters a bit saner.
- Re-enable CPU mitigations by default on non-x86
- Fix TDX shared bit propagation on mprotect()
- Fix potential show_regs() system hang when PKE initialization
is not fully finished yet.
- Add the 0x10-0x1f model IDs to the Zen5 range
- Harden #VC instruction emulation some more
* tag 'x86-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Ignore "mitigations" kernel parameter if CPU_MITIGATIONS=n
cpu: Re-enable CPU mitigations by default for !X86 architectures
x86/tdx: Preserve shared bit on mprotect()
x86/cpu: Fix check for RDPKRU in __show_regs()
x86/CPU/AMD: Add models 0x10-0x1f to the Zen5 range
x86/sev: Check for MWAITX and MONITORX opcodes in the #VC handler
housekeeping_setup() checks cpumask_intersects(present, online) to ensure
that the kernel will have at least one housekeeping CPU after smp_init(),
but this doesn't work if the maxcpus= kernel parameter limits the number of
processors available after bootup.
For example, a kernel with "maxcpus=2 nohz_full=0-2" parameters crashes at
boot time on a virtual machine with 4 CPUs.
Change housekeeping_setup() to use cpumask_first_and() and check that the
returned CPU number is valid and less than setup_max_cpus.
Another corner case is "nohz_full=0" on a machine with a single CPU or with
the maxcpus=1 kernel argument. In this case non_housekeeping_mask is empty
and tick_nohz_full_setup() makes no sense. And indeed, the kernel hits the
WARN_ON(tick_nohz_full_running) in tick_sched_do_timer().
And how should the kernel interpret the "nohz_full=" parameter? It should
be silently ignored, but currently cpulist_parse() happily returns the
empty cpumask and this leads to the same problem.
Change housekeeping_setup() to check cpumask_empty(non_housekeeping_mask)
and do nothing in this case.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240413141746.GA10008@redhat.com
Documentation/timers/no_hz.rst states that the "nohz_full=" mask must not
include the boot CPU, which is no longer true after:
08ae95f4fd ("nohz_full: Allow the boot CPU to be nohz_full").
However after:
aae17ebb53 ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")
the kernel will crash at boot time in this case; housekeeping_any_cpu()
returns an invalid CPU number until smp_init() brings the first
housekeeping CPU up.
Change housekeeping_any_cpu() to check the result of cpumask_any_and() and
return smp_processor_id() in this case.
This is just the simple and backportable workaround which fixes the
symptom, but smp_processor_id() at boot time should be safe at least for
type == HK_TYPE_TIMER, this more or less matches the tick_do_timer_boot_cpu
logic.
There is no worry about cpu_down(); tick_nohz_cpu_down() will not allow to
offline tick_do_timer_cpu (the 1st online housekeeping CPU).
Fixes: aae17ebb53 ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")
Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240411143905.GA19288@redhat.com
Closes: https://lore.kernel.org/all/20240402105847.GA24832@redhat.com/
Daniel Borkmann says:
====================
pull-request: bpf 2024-04-26
We've added 12 non-merge commits during the last 22 day(s) which contain
a total of 14 files changed, 168 insertions(+), 72 deletions(-).
The main changes are:
1) Fix BPF_PROBE_MEM in verifier and JIT to skip loads from vsyscall page,
from Puranjay Mohan.
2) Fix a crash in XDP with devmap broadcast redirect when the latter map
is in process of being torn down, from Toke Høiland-Jørgensen.
3) Fix arm64 and riscv64 BPF JITs to properly clear start time for BPF
program runtime stats, from Xu Kuohai.
4) Fix a sockmap KCSAN-reported data race in sk_psock_skb_ingress_enqueue,
from Jason Xing.
5) Fix BPF verifier error message in resolve_pseudo_ldimm64,
from Anton Protopopov.
6) Fix missing DEBUG_INFO_BTF_MODULES Kconfig menu item,
from Andrii Nakryiko.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test PROBE_MEM of VSYSCALL_ADDR on x86-64
bpf, x86: Fix PROBE_MEM runtime load check
bpf: verifier: prevent userspace memory access
xdp: use flags field to disambiguate broadcast redirect
arm32, bpf: Reimplement sign-extension mov instruction
riscv, bpf: Fix incorrect runtime stats
bpf, arm64: Fix incorrect runtime stats
bpf: Fix a verifier verbose message
bpf, skmsg: Fix NULL pointer dereference in sk_psock_skb_ingress_enqueue
MAINTAINERS: bpf: Add Lehui and Puranjay as riscv64 reviewers
MAINTAINERS: Update email address for Puranjay Mohan
bpf, kconfig: Fix DEBUG_INFO_BTF_MODULES Kconfig definition
====================
Link: https://lore.kernel.org/r/20240426224248.26197-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull misc fixes from Andrew Morton:
"11 hotfixes. 8 are cc:stable and the remaining 3 (nice ratio!) address
post-6.8 issues or aren't considered suitable for backporting.
All except one of these are for MM. I see no particular theme - it's
singletons all over"
* tag 'mm-hotfixes-stable-2024-04-26-13-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/hugetlb: fix DEBUG_LOCKS_WARN_ON(1) when dissolve_free_hugetlb_folio()
selftests: mm: protection_keys: save/restore nr_hugepages value from launch script
stackdepot: respect __GFP_NOLOCKDEP allocation flag
hugetlb: check for anon_vma prior to folio allocation
mm: zswap: fix shrinker NULL crash with cgroup_disable=memory
mm: turn folio_test_hugetlb into a PageType
mm: support page_mapcount() on page_has_type() pages
mm: create FOLIO_FLAG_FALSE and FOLIO_TYPE_OPS macros
mm/hugetlb: fix missing hugetlb_lock for resv uncharge
selftests: mm: fix unused and uninitialized variable warning
selftests/harness: remove use of LINE_MAX
Explicitly disallow enabling mitigations at runtime for kernels that were
built with CONFIG_CPU_MITIGATIONS=n, as some architectures may omit code
entirely if mitigations are disabled at compile time.
E.g. on x86, a large pile of Kconfigs are buried behind CPU_MITIGATIONS,
and trying to provide sane behavior for retroactively enabling mitigations
is extremely difficult, bordering on impossible. E.g. page table isolation
and call depth tracking require build-time support, BHI mitigations will
still be off without additional kernel parameters, etc.
[ bp: Touchups. ]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240420000556.2645001-3-seanjc@google.com
Rename x86's to CPU_MITIGATIONS, define it in generic code, and force it
on for all architectures exception x86. A recent commit to turn
mitigations off by default if SPECULATION_MITIGATIONS=n kinda sorta
missed that "cpu_mitigations" is completely generic, whereas
SPECULATION_MITIGATIONS is x86-specific.
Rename x86's SPECULATIVE_MITIGATIONS instead of keeping both and have it
select CPU_MITIGATIONS, as having two configs for the same thing is
unnecessary and confusing. This will also allow x86 to use the knob to
manage mitigations that aren't strictly related to speculative
execution.
Use another Kconfig to communicate to common code that CPU_MITIGATIONS
is already defined instead of having x86's menu depend on the common
CPU_MITIGATIONS. This allows keeping a single point of contact for all
of x86's mitigations, and it's not clear that other architectures *want*
to allow disabling mitigations at compile-time.
Fixes: f337a6a21e ("x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n")
Closes: https://lkml.kernel.org/r/20240413115324.53303a68%40canb.auug.org.au
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240420000556.2645001-2-seanjc@google.com
The current folio_test_hugetlb() can be fooled by a concurrent folio split
into returning true for a folio which has never belonged to hugetlbfs.
This can't happen if the caller holds a refcount on it, but we have a few
places (memory-failure, compaction, procfs) which do not and should not
take a speculative reference.
Since hugetlb pages do not use individual page mapcounts (they are always
fully mapped and use the entire_mapcount field to record the number of
mappings), the PageType field is available now that page_mapcount()
ignores the value in this field.
In compaction and with CONFIG_DEBUG_VM enabled, the current implementation
can result in an oops, as reported by Luis. This happens since 9c5ccf2db0
("mm: remove HUGETLB_PAGE_DTOR") effectively added some VM_BUG_ON() checks
in the PageHuge() testing path.
[willy@infradead.org: update vmcoreinfo]
Link: https://lkml.kernel.org/r/ZgGZUvsdhaT1Va-T@casper.infradead.org
Link: https://lkml.kernel.org/r/20240321142448.1645400-6-willy@infradead.org
Fixes: 9c5ccf2db0 ("mm: remove HUGETLB_PAGE_DTOR")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218227
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add crypto API support to BPF to be able to decrypt or encrypt packets
in TC/XDP BPF programs. Special care should be taken for initialization
part of crypto algo because crypto alloc) doesn't work with preemtion
disabled, it can be run only in sleepable BPF program. Also async crypto
is not supported because of the very same issue - TC/XDP BPF programs
are not sleepable.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://lore.kernel.org/r/20240422225024.2847039-2-vadfed@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Introduce two new BPF kfuncs, bpf_preempt_disable and
bpf_preempt_enable. These kfuncs allow disabling preemption in BPF
programs. Nesting is allowed, since the intended use cases includes
building native BPF spin locks without kernel helper involvement. Apart
from that, this can be used to per-CPU data structures for cases where
programs (or userspace) may preempt one or the other. Currently, while
per-CPU access is stable, whether it will be consistent is not
guaranteed, as only migration is disabled for BPF programs.
Global functions are disallowed from being called, but support for them
will be added as a follow up not just preempt kfuncs, but rcu_read_lock
kfuncs as well. Static subprog calls are permitted. Sleepable helpers
and kfuncs are disallowed in non-preemptible regions.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240424031315.2757363-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
__bpf_prog_enter_sleepable_recur does recursion check which is not applicable
to wq callback. The callback function is part of bpf program and bpf prog might
be running on the same cpu. So recursion check would incorrectly prevent
callback from running. The code can call __bpf_prog_enter_sleepable(), but
run_ctx would be fake, hence use explicit rcu_read_lock_trace();
migrate_disable(); to address this problem. Another reason to open code is
__bpf_prog_enter* are not available in !JIT configs.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404241719.IIGdpAku-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202404241811.FFV4Bku3-lkp@intel.com/
Fixes: eb48f6cd41 ("bpf: wq: add bpf_wq_init")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The default nna (node_nr_active) is used when the pool isn't tied to a
specific NUMA node. This can happen in the following cases:
1. On NUMA, if per-node pwq init failure and the fallback pwq is used.
2. On NUMA, if a pool is configured to span multiple nodes.
3. On single node setups.
5797b1c189 ("workqueue: Implement system-wide nr_active enforcement for
unbound workqueues") set the default nna->max to min_active because only #1
was being considered. For #2 and #3, using min_active means that the max
concurrency in normal operation is pushed down to min_active which is
currently 8, which can obviously lead to performance issues.
exact value nna->max is set to doesn't really matter. #2 can only happen if
the workqueue is intentionally configured to ignore NUMA boundaries and
there's no good way to distribute max_active in this case. #3 is the default
behavior on single node machines.
Let's set it the default nna->max to max_active. This fixes the artificially
lowered concurrency problem on single node machines and shouldn't hurt
anything for other cases.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 5797b1c189 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
Link: https://lore.kernel.org/dm-devel/20240410084531.2134621-1-shinichiro.kawasaki@wdc.com/
Signed-off-by: Tejun Heo <tj@kernel.org>
We need to teach the verifier about the second argument which is declared
as void * but which is of type KF_ARG_PTR_TO_MAP. We could have dropped
this extra case if we declared the second argument as struct bpf_map *,
but that means users will have to do extra casting to have their program
compile.
We also need to duplicate the timer code for the checking if the map
argument is matching the provided workqueue.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-11-6c986a5a741f@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce support for KF_ARG_PTR_TO_WORKQUEUE. The kfuncs will use bpf_wq
as argument and that will be recognized as workqueue argument by verifier.
bpf_wq_kern casting can happen inside kfunc, but using bpf_wq in
argument makes life easier for users who work with non-kern type in BPF
progs.
Duplicate process_timer_func into process_wq_func.
meta argument is only needed to ensure bpf_wq_init's workqueue and map
arguments are coming from the same map (map_uid logic is necessary for
correct inner-map handling), so also amend check_kfunc_args() to
match what helpers functions check is doing.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-8-6c986a5a741f@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
To be able to add workqueues and reuse most of the timer code, we need
to make bpf_hrtimer more generic.
There is no code change except that the new struct gets a new u64 flags
attribute. We are still below 2 cache lines, so this shouldn't impact
the current running codes.
The ordering is also changed. Everything related to async callback
is now on top of bpf_hrtimer.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-1-6c986a5a741f@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With cpu_possible_mask=0-63 and cpu_online_mask=0-7 the following
kernel oops was observed:
smp: Bringing up secondary CPUs ...
smp: Brought up 1 node, 8 CPUs
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0000000000000000 TEID: 0000000000000803
[..]
Call Trace:
arch_vcpu_is_preempted+0x12/0x80
select_idle_sibling+0x42/0x560
select_task_rq_fair+0x29a/0x3b0
try_to_wake_up+0x38e/0x6e0
kick_pool+0xa4/0x198
__queue_work.part.0+0x2bc/0x3a8
call_timer_fn+0x36/0x160
__run_timers+0x1e2/0x328
__run_timer_base+0x5a/0x88
run_timer_softirq+0x40/0x78
__do_softirq+0x118/0x388
irq_exit_rcu+0xc0/0xd8
do_ext_irq+0xae/0x168
ext_int_handler+0xbe/0xf0
psw_idle_exit+0x0/0xc
default_idle_call+0x3c/0x110
do_idle+0xd4/0x158
cpu_startup_entry+0x40/0x48
rest_init+0xc6/0xc8
start_kernel+0x3c4/0x5e0
startup_continue+0x3c/0x50
The crash is caused by calling arch_vcpu_is_preempted() for an offline
CPU. To avoid this, select the cpu with cpumask_any_and_distribute()
to mask __pod_cpumask with cpu_online_mask. In case no cpu is left in
the pool, skip the assignment.
tj: This doesn't fully fix the bug as CPUs can still go down between picking
the target CPU and the wake call. Fixing that likely requires adding
cpu_online() test to either the sched or s390 arch code. However, regardless
of how that is fixed, workqueue shouldn't be picking a CPU which isn't
online as that would result in unpredictable and worse behavior.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Fixes: 8639ecebc9 ("workqueue: Implement non-strict affinity scope for unbound workqueues")
Cc: stable@vger.kernel.org # v6.6+
Signed-off-by: Tejun Heo <tj@kernel.org>
To be able to constify instances of struct ctl_tables it is necessary to
remove ways through which non-const versions are exposed from the
sysctl core.
One of these is the ctl_table_arg member of struct ctl_table_header.
Constify this reference as a prerequisite for the full constification of
struct ctl_table instances.
No functional change.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull scheduler fix from Borislav Petkov:
- Add a missing memory barrier in the concurrency ID mm switching
* tag 'sched_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Add missing memory barrier in switch_mm_cid
This patch addresses a latent unsoundness issue in the
scalar(32)_min_max_and/or/xor functions. While it is not a bugfix,
it ensures that the functions produce sound outputs for all inputs.
The issue occurs in these functions when setting signed bounds. The
following example illustrates the issue for scalar_min_max_and(),
but it applies to the other functions.
In scalar_min_max_and() the following clause is executed when ANDing
positive numbers:
/* ANDing two positives gives a positive, so safe to
* cast result into s64.
*/
dst_reg->smin_value = dst_reg->umin_value;
dst_reg->smax_value = dst_reg->umax_value;
However, if umin_value and umax_value of dst_reg cross the sign boundary
(i.e., if (s64)dst_reg->umin_value > (s64)dst_reg->umax_value), then we
will end up with smin_value > smax_value, which is unsound.
Previous works [1, 2] have discovered and reported this issue. Our tool
Agni [2, 3] consideres it a false positive. This is because, during the
verification of the abstract operator scalar_min_max_and(), Agni restricts
its inputs to those passing through reg_bounds_sync(). This mimics
real-world verifier behavior, as reg_bounds_sync() is invariably executed
at the tail of every abstract operator. Therefore, such behavior is
unlikely in an actual verifier execution.
However, it is still unsound for an abstract operator to set signed bounds
such that smin_value > smax_value. This patch fixes it, making the abstract
operator sound for all (well-formed) inputs.
It is worth noting that while the previous code updated the signed bounds
(using the output unsigned bounds) only when the *input signed* bounds
were positive, the new code updates them whenever the *output unsigned*
bounds do not cross the sign boundary.
An alternative approach to fix this latent unsoundness would be to
unconditionally set the signed bounds to unbounded [S64_MIN, S64_MAX], and
let reg_bounds_sync() refine the signed bounds using the unsigned bounds
and the tnum. We found that our approach produces more precise (tighter)
bounds.
For example, consider these inputs to BPF_AND:
/* dst_reg */
var_off.value: 8608032320201083347
var_off.mask: 615339716653692460
smin_value: 8070450532247928832
smax_value: 8070450532247928832
umin_value: 13206380674380886586
umax_value: 13206380674380886586
s32_min_value: -2110561598
s32_max_value: -133438816
u32_min_value: 4135055354
u32_max_value: 4135055354
/* src_reg */
var_off.value: 8584102546103074815
var_off.mask: 9862641527606476800
smin_value: 2920655011908158522
smax_value: 7495731535348625717
umin_value: 7001104867969363969
umax_value: 8584102543730304042
s32_min_value: -2097116671
s32_max_value: 71704632
u32_min_value: 1047457619
u32_max_value: 4268683090
After going through tnum_and() -> scalar32_min_max_and() ->
scalar_min_max_and() -> reg_bounds_sync(), our patch produces the following
bounds for s32:
s32_min_value: -1263875629
s32_max_value: -159911942
Whereas, setting the signed bounds to unbounded in scalar_min_max_and()
produces:
s32_min_value: -1263875629
s32_max_value: -1
As observed, our patch produces a tighter s32 bound. We also confirmed
using Agni and SMT verification that our patch always produces signed
bounds that are equal to or more precise than setting the signed bounds to
unbounded in scalar_min_max_and().
[1] https://sanjit-bhat.github.io/assets/pdf/ebpf-verifier-range-analysis22.pdf
[2] https://link.springer.com/chapter/10.1007/978-3-031-37709-9_12
[3] https://github.com/bpfverif/agni
Co-developed-by: Matan Shachnai <m.shachnai@rutgers.edu>
Signed-off-by: Matan Shachnai <m.shachnai@rutgers.edu>
Co-developed-by: Srinivas Narayana <srinivas.narayana@rutgers.edu>
Signed-off-by: Srinivas Narayana <srinivas.narayana@rutgers.edu>
Co-developed-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu>
Signed-off-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu>
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240402212039.51815-1-harishankar.vishwanathan@gmail.com
Link: https://lore.kernel.org/bpf/20240416115303.331688-1-harishankar.vishwanathan@gmail.com
If the BTF code is enabled in the build configuration, the start/stop
BTF markers are guaranteed to exist. Only when CONFIG_DEBUG_INFO_BTF=n,
the references in btf_parse_vmlinux() will remain unsatisfied, relying
on the weak linkage of the external references to avoid breaking the
build.
Avoid GOT based relocations to these markers in the final executable by
dropping the weak attribute and instead, make btf_parse_vmlinux() return
ERR_PTR(-ENOENT) directly if CONFIG_DEBUG_INFO_BTF is not enabled to
begin with. The compiler will drop any subsequent references to
__start_BTF and __stop_BTF in that case, allowing the link to succeed.
Note that Clang will notice that taking the address of __start_BTF can
no longer yield NULL, so testing for that condition becomes unnecessary.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240415162041.2491523-8-ardb+git@google.com
Many architectures' switch_mm() (e.g. arm64) do not have an smp_mb()
which the core scheduler code has depended upon since commit:
commit 223baf9d17 ("sched: Fix performance regression introduced by mm_cid")
If switch_mm() doesn't call smp_mb(), sched_mm_cid_remote_clear() can
unset the actively used cid when it fails to observe active task after it
sets lazy_put.
There *is* a memory barrier between storing to rq->curr and _return to
userspace_ (as required by membarrier), but the rseq mm_cid has stricter
requirements: the barrier needs to be issued between store to rq->curr
and switch_mm_cid(), which happens earlier than:
- spin_unlock(),
- switch_to().
So it's fine when the architecture switch_mm() happens to have that
barrier already, but less so when the architecture only provides the
full barrier in switch_to() or spin_unlock().
It is a bug in the rseq switch_mm_cid() implementation. All architectures
that don't have memory barriers in switch_mm(), but rather have the full
barrier either in finish_lock_switch() or switch_to() have them too late
for the needs of switch_mm_cid().
Introduce a new smp_mb__after_switch_mm(), defined as smp_mb() in the
generic barrier.h header, and use it in switch_mm_cid() for scheduler
transitions where switch_mm() is expected to provide a memory barrier.
Architectures can override smp_mb__after_switch_mm() if their
switch_mm() implementation provides an implicit memory barrier.
Override it with a no-op on x86 which implicitly provide this memory
barrier by writing to CR3.
Fixes: 223baf9d17 ("sched: Fix performance regression introduced by mm_cid")
Reported-by: levi.yun <yeoreum.yun@arm.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> # for arm64
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> # for x86
Cc: <stable@vger.kernel.org> # 6.4.x
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240415152114.59122-2-mathieu.desnoyers@efficios.com
kernel/configs/hardening.config turns on UBSAN for the bounds sanitizer,
as that in combination with trapping can stop the exploitation of buffer
overflows within the kernel. At the same time, hardening.config turns
off every other UBSAN sanitizer because trapping means all UBSAN reports
will be fatal and the problems brought up by other sanitizers generally
do not have security implications.
The signed integer overflow sanitizer was recently added back to the
kernel and it is default on with just CONFIG_UBSAN=y, meaning that it
gets enabled when merging hardening.config into another configuration.
While this sanitizer does have security implications like the array
bounds sanitizer, work to clean up enough instances to allow this to run
in production environments is still ramping up, which means regular
users and testers may be broken by these instances with
CONFIG_UBSAN_TRAP=y. Disable CONFIG_UBSAN_SIGNED_WRAP in
hardening.config to avoid this situation.
Fixes: 557f8c582a ("ubsan: Reintroduce signed overflow sanitizer")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240411-fix-ubsan-in-hardening-config-v1-2-e0177c80ffaa@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The initial change that added kernel/configs/hardening.config attempted
to disable all UBSAN sanitizers except for the array bounds one while
turning on UBSAN_TRAP. Unfortunately, it only got the syntax for
CONFIG_UBSAN_SHIFT correct, so configurations that are on by default
with CONFIG_UBSAN=y such as CONFIG_UBSAN_{BOOL,ENUM} do not get disabled
properly.
CONFIG_ARCH_HAS_UBSAN=y
CONFIG_UBSAN=y
CONFIG_UBSAN_TRAP=y
CONFIG_CC_HAS_UBSAN_BOUNDS_STRICT=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS_STRICT=y
# CONFIG_UBSAN_SHIFT is not set
# CONFIG_UBSAN_DIV_ZERO is not set
# CONFIG_UBSAN_UNREACHABLE is not set
CONFIG_UBSAN_SIGNED_WRAP=y
CONFIG_UBSAN_BOOL=y
CONFIG_UBSAN_ENUM=y
# CONFIG_TEST_UBSAN is not set
Add the missing 'is not set' to each configuration that needs it so that
they get disabled as intended.
CONFIG_ARCH_HAS_UBSAN=y
CONFIG_UBSAN=y
CONFIG_UBSAN_TRAP=y
CONFIG_CC_HAS_UBSAN_BOUNDS_STRICT=y
CONFIG_UBSAN_BOUNDS=y
CONFIG_UBSAN_BOUNDS_STRICT=y
# CONFIG_UBSAN_SHIFT is not set
# CONFIG_UBSAN_DIV_ZERO is not set
# CONFIG_UBSAN_UNREACHABLE is not set
CONFIG_UBSAN_SIGNED_WRAP=y
# CONFIG_UBSAN_BOOL is not set
# CONFIG_UBSAN_ENUM is not set
# CONFIG_TEST_UBSAN is not set
Fixes: 215199e3d9 ("hardening: Provide Kconfig fragments for basic options")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240411-fix-ubsan-in-hardening-config-v1-1-e0177c80ffaa@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Pull misc x86 fixes from Ingo Molnar:
- Follow up fixes for the BHI mitigations code
- Fix !SPECULATION_MITIGATIONS bug not turning off mitigations as
expected
- Work around an APIC emulation bug when the kernel is built with Clang
and run as a SEV guest
- Follow up x86 topology fixes
* tag 'x86-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/amd: Move TOPOEXT enablement into the topology parser
x86/cpu/amd: Make the NODEID_MSR union actually work
x86/cpu/amd: Make the CPUID 0x80000008 parser correct
x86/bugs: Replace CONFIG_SPECTRE_BHI_{ON,OFF} with CONFIG_MITIGATION_SPECTRE_BHI
x86/bugs: Remove CONFIG_BHI_MITIGATION_AUTO and spectre_bhi=auto
x86/bugs: Clarify that syscall hardening isn't a BHI mitigation
x86/bugs: Fix BHI handling of RRSBA
x86/bugs: Rename various 'ia32_cap' variables to 'x86_arch_cap_msr'
x86/bugs: Cache the value of MSR_IA32_ARCH_CAPABILITIES
x86/bugs: Fix BHI documentation
x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n
x86/topology: Don't update cpu_possible_map in topo_set_cpuids()
x86/bugs: Fix return type of spectre_bhi_state()
x86/apic: Force native_apic_mem_read() to use the MOV instruction
