Rather than checking hwversion, follow the usual patter and add special
bit to the lm->features to check whether the LM has combined or separate
alpha registers. While we are at it, rename
dpu_hw_lm_setup_blend_config_sdm845() to
dpu_hw_lm_setup_blend_config_combined_alpha().
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/488155/
Link: https://lore.kernel.org/r/20220602202447.1755115-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add writeback support for sc7180 devices. This has been
validated on sc7180 chromebook using IGT writeback test
suite.
localhost /usr/local/libexec/igt-gpu-tools # ./kms_writeback
Starting subtest: writeback-pixel-formats
Subtest writeback-pixel-formats: SUCCESS (0.001s)
Starting subtest: writeback-invalid-parameters
Subtest writeback-invalid-parameters: SUCCESS (0.004s)
Starting subtest: writeback-fb-id
Subtest writeback-fb-id: SUCCESS (0.009s)
Starting subtest: writeback-check-output
Subtest writeback-check-output: SUCCESS (0.203s)
Adding this will increase IGT coverage on chromebooks and also
allow using writeback functionality for other use-cases as
necessary.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/485787/
Link: https://lore.kernel.org/r/20220510235439.31916-1-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Another set of minor patches for Arm DTS files and soc specific drivers:
- More reference counting bug fixes for DT nodes, and other
trivial code fixes
- Multiple code fixes for the Arm SCMI firmware driver to improve
compatibility with firmware implementations.
- A patch series for at91 to address power management issues from
using the wrong DT compatible properties.
- A series of patches to fix pad settings for NXP imx8mp to leave the
configuration untouched from the boot loader
- Additional DT fixes for qualcomm and NXP platforms
- A boot time fix for stm32mp15 DT
- Konrad Dybcio becomes an additional reviewer for the Qualcomm
platforms
-----BEGIN PGP SIGNATURE-----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=5KYh
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of minor patches for Arm DTS files and soc specific
drivers:
- More reference counting bug fixes for DT nodes, and other trivial
code fixes
- Multiple code fixes for the Arm SCMI firmware driver to improve
compatibility with firmware implementations.
- A patch series for at91 to address power management issues from
using the wrong DT compatible properties.
- A series of patches to fix pad settings for NXP imx8mp to leave the
configuration untouched from the boot loader
- Additional DT fixes for qualcomm and NXP platforms
- A boot time fix for stm32mp15 DT
- Konrad Dybcio becomes an additional reviewer for the Qualcomm
platforms"
* tag 'soc-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
soc: qcom: smem: use correct format characters
ARM: dts: stm32: add missing usbh clock and fix clk order on stm32mp15
ARM: dts: stm32: delete fixed clock node on STM32MP15-SCMI
ARM: dts: stm32: DSI should use LSE SCMI clock on DK1/ED1 STM32 board
ARM: dts: stm32: use the correct clock source for CEC on stm32mp151
ARM: dts: stm32: fix pwr regulators references to use scmi
soc: ixp4xx/npe: Fix unused match warning
ARM: at91: pm: Mark at91_pm_secure_init as __init
ARM: at91: fix soc detection for SAM9X60 SiPs
ARM: dts: at91: sama5d2_icp: fix eeprom compatibles
ARM: dts: at91: sam9x60ek: fix eeprom compatible and size
ARM: at91: pm: use proper compatibles for sama7g5's rtc and rtt
ARM: at91: pm: use proper compatibles for sam9x60's rtc and rtt
ARM: at91: pm: use proper compatible for sama5d2's rtc
arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typo
firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx API
firmware: arm_scmi: Fix response size warning for OPTEE transport
arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settings
...
Add flexibility by moving the yuv422 en bit to SoC specific config
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220701035845.16458-12-rex-bc.chen@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add flexibility by moving the swap shift value to SoC specific config.
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220701035845.16458-11-rex-bc.chen@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add flexibility by moving the hvsize mask to SoC specific config.
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220701035845.16458-10-rex-bc.chen@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add flexibility by moving the dimension mask to the SoC config
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220701035845.16458-9-rex-bc.chen@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
The hardware design of dp_intf does not support input swap, so we add
a bit of flexibility to support SoCs without swap_input support.
We also add a warning message if the hardware is not supported and it
needs to swap input.
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220701035845.16458-8-rex-bc.chen@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Dp_intf does not support CK/DE polarity because the polarity information
is not used for eDP and DP while dp_intf is only for eDP and DP.
Therefore, we add a bit of flexibility to support SoCs without CK/DE pol
support.
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220701035845.16458-7-rex-bc.chen@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
For RGB colorimetry, CTA-861 support both limited and full range data
when receiving video with RGB color space.
We use drm_default_rgb_quant_range() to determine the correct setting.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220701035845.16458-6-rex-bc.chen@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Enabling the dpi too early causes glitches on screen.
Move the call to mtk_dpi_enable() at the end of the bridge_enable
callback to ensure everything is setup properly before enabling dpi.
Fixes: 9e629c17aa ("drm/mediatek: Add DPI sub driver")
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220701035845.16458-16-rex-bc.chen@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
This driver will support dp_intf and there are many configs between dpi
and dp_intf. Therefore, we will add many configs in "struct mtk_dpi_conf".
To let this structure more readable, we add this kernel doc.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220701035845.16458-4-rex-bc.chen@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
DP_INTF is similar to DPI but does not have the exact same feature set
or register layouts.
DP_INTF is the sink of the display pipeline that is connected to the
DisplayPort controller and encoder unit. It takes the same clocks as
DPI.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220701035845.16458-2-rex-bc.chen@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Make sure bridge_disable will be called before suspend by calling
drm_mode_config_helper_suspend() in .prepare callback.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220629190545.478113-1-hsinyi@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Until now, when running at the maximum resolution of 1280x720 at 32bpp
on the JZ4770 SoC the output was garbled, the X/Y position of the
top-left corner of the framebuffer warping to a random position with
the whole image being offset accordingly, every time a new frame was
being submitted.
This problem can be eliminated by using a bigger burst size for the DMA.
Set in each soc_info structure the maximum burst size supported by the
corresponding SoC, and use it in the driver.
Set the new value using regmap_update_bits() instead of
regmap_set_bits(), since we do want to override the old value of the
burst size. (Note that regmap_set_bits() wasn't really valid before for
the same reason, but it never seemed to be a problem).
Cc: <stable@vger.kernel.org>
Fixes: 90b86fcc47 ("DRM: Add KMS driver for the Ingenic JZ47xx SoCs")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20220702230727.66704-1-paul@crapouillou.net
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Christophe Branchereau <cbranchereau@gmail.com>
When compiling with -Wformat, clang emits the following warnings:
drivers/soc/qcom/smem.c:847:41: warning: format specifies type 'unsigned
short' but the argument has type 'unsigned int' [-Wformat]
dev_err(smem->dev, "bad host %hu\n", remote_host);
~~~ ^~~~~~~~~~~
%u
./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err'
dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
~~~ ^~~~~~~~~~~
./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap'
_p_func(dev, fmt, ##__VA_ARGS__); \
~~~ ^~~~~~~~~~~
drivers/soc/qcom/smem.c:852:47: warning: format specifies type 'unsigned
short' but the argument has type 'unsigned int' [-Wformat]
dev_err(smem->dev, "duplicate host %hu\n", remote_host);
~~~ ^~~~~~~~~~~
%u
./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err'
dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
~~~ ^~~~~~~~~~~
./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap'
_p_func(dev, fmt, ##__VA_ARGS__); \
~~~ ^~~~~~~~~~~
The types of these arguments are unconditionally defined, so this patch
updates the format character to the correct one and change type of
remote_host to "u16" to match with other types.
Signed-off-by: Bill Wendling <morbo@google.com>
Tested-by: Justin Stitt <jstitt007@gmail.com>
Reviewed-by: Justin Stitt <jstitt007@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A collection of fixes for v5.19, quite large but nothing major - a good
chunk of it is more stuff that was identified by mixer-test regarding
event generation.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmK12zAACgkQJNaLcl1U
h9C1MQf/Z2R0KmA73QWqSut9IXwUGpAvPQJtx8hOUKkA7efQNcK4xywa0CbnmFLp
kUAAXD5FhpPkZpLDAmjpTVgmgB6Wep2FX5LM5YnUgC4/sha3OpnBPD3ryGVuhJ2b
X/70GfflZRmlLCzp4UALieqgRjXb/Lk6gqeCNOzr6A5ewYLq4/1h4rPRaWluZ4MQ
kjL4TXYfRXbK1g39EQMelV/HEgRiZ5NhnoujtOfQGZa8iUF9r9EAmD3PKqR0kp8d
vUD4nxt7PuQW+ksdnJuRsBII3/MwrkF8S5lgfyBW80C71YeGVaba0Ty05oTF2u2H
GAWHfoGTw1dDnI3JwcI+7ZT6zX+HpA==
=3OmW
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.19
A collection of fixes for v5.19, quite large but nothing major - a good
chunk of it is more stuff that was identified by mixer-test regarding
event generation.
The patch applies the same quirks used for SC-01 at firmware v1.1.0 to
the ones running v1.0.0, with respect to hard-coded sample rates.
I got two more units and successfully tested the patch series with both
firmwares.
The support is now complete (not accounting ASIO).
Signed-off-by: Egor Vorontsov <sdoregor@sdore.me>
Link: https://lore.kernel.org/r/20220627100041.2861494-2-sdoregor@sdore.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fiero SC-01 is a USB sound card with two mono inputs and a single
stereo output. The inputs are composed into a single stereo stream.
The device uses a vendor-provided driver on Windows and does not work
at all without it. The driver mostly provides ASIO functionality, but
also alters the way the sound card is queried for sample rates and
clocks.
ALSA queries those failing with an EPIPE (same as Windows 10 does).
Presumably, the vendor-provided driver does not query it at all, simply
matching by VID:PID. Thus, I consider this a buggy firmware and adhere
to a set of fixed endpoint quirks instead.
The soundcard has an internal clock. Implicit feedback mode is required
for the playback.
I have updated my device to v1.1.0 from a Windows 10 VM using a vendor-
provided binary prior to the development, hoping for it to just begin
working. The device provides no obvious way to downgrade the firmware,
and regardless, there's no binary available for v1.0.0 anyway.
Thus, I will be getting another unit to extend the patch with support
for that. Expected to be a simple copy-paste of the existing one,
though.
There were no previous reports of that device in context of Linux
anywhere. Other issues have been reported though, but that's out of the
scope.
Signed-off-by: Egor Vorontsov <sdoregor@sdore.me>
Link: https://lore.kernel.org/r/20220627100041.2861494-1-sdoregor@sdore.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Treat the claimed 96kHz 1ch in the descriptors as 48kHz 2ch, so that
the audio stream doesn't sound mono. Also fix initial stream
alignment, so that left and right channels are in the correct order.
Signed-off-by: John Veness <john-linux@pelago.org.uk>
Link: https://lore.kernel.org/r/20220624140757.28758-1-john-linux@pelago.org.uk
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The platform device for the rng must be created much later in boot.
Otherwise it tries to connect to a parent that doesn't yet exist,
resulting in this splat:
[ 0.000478] kobject: '(null)' ((____ptrval____)): is not initialized, yet kobject_get() is being called.
[ 0.002925] [c000000002a0fb30] [c00000000073b0bc] kobject_get+0x8c/0x100 (unreliable)
[ 0.003071] [c000000002a0fba0] [c00000000087e464] device_add+0xf4/0xb00
[ 0.003194] [c000000002a0fc80] [c000000000a7f6e4] of_device_add+0x64/0x80
[ 0.003321] [c000000002a0fcb0] [c000000000a800d0] of_platform_device_create_pdata+0xd0/0x1b0
[ 0.003476] [c000000002a0fd00] [c00000000201fa44] pnv_get_random_long_early+0x240/0x2e4
[ 0.003623] [c000000002a0fe20] [c000000002060c38] random_init+0xc0/0x214
This patch fixes the issue by doing the platform device creation inside
of machine_subsys_initcall.
Fixes: f3eac42665 ("powerpc/powernv: wire up rng during setup_arch")
Cc: stable@vger.kernel.org
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
[mpe: Change "of node" to "platform device" in change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220630121654.1939181-1-Jason@zx2c4.com
In mcp251xfd_register_get_dev_id() the device ID register is read with
handcrafted SPI transfers. As all registers, this register is in
little endian. Further it is not naturally aligned in struct
mcp251xfd_map_buf_nocrc::data. However after the transfer the register
content is converted from big endian to CPU endianness not taking care
of being unaligned.
Fix the conversion by converting from little endian to CPU endianness
taking the unaligned source into account.
Side note: So far the register content is 0x0 on all mcp251xfd
compatible chips, and is only used for an informative printk.
Link: https://lore.kernel.org/all/20220627092859.809042-1-mkl@pengutronix.de
Fixes: 55e5b97f00 ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The device ID register is 32 bits wide. The driver uses incorrectly
the size of a pointer to a u32 to calculate the length of the SPI
transfer. This results in a read of 2 registers on 64 bit platforms.
This is no problem on the Linux side, as the RX buffer of the SPI
transfer is large enough. In the mpc251xfd chip this results in the
read of an undocumented register. So far no problems were observed.
Fix the length of the SPI transfer to read the device ID register
only.
Link: https://lore.kernel.org/all/20220616094914.244440-1-mkl@pengutronix.de
Fixes: 55e5b97f00 ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In commit 169d00a256 ("can: mcp251xfd: add TX IRQ coalescing
support") software based TX coalescing was added to the driver. The
key idea is to keep the TX complete IRQ disabled for some time after
processing it and re-enable later by a hrtimer. When bringing the
interface down, this timer has to be stopped.
Add the missing hrtimer_cancel() of the tx_irq_time hrtimer to
mcp251xfd_stop().
Link: https://lore.kernel.org/all/20220620143942.891811-1-mkl@pengutronix.de
Fixes: 169d00a256 ("can: mcp251xfd: add TX IRQ coalescing support")
Cc: stable@vger.kernel.org # v5.18
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The mcp251xfd compatible chips have an erratum ([1], [2]), where the
received CRC doesn't match the calculated CRC. In commit
c7eb923c3c ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work
around broken CRC on TBC register") the following workaround was
implementierend.
- If a CRC read error on the TBC register is detected and the first
byte is 0x00 or 0x80, the most significant bit of the first byte is
flipped and the CRC is calculated again.
- If the CRC now matches, the _original_ data is passed to the reader.
For now we assume transferred data was OK.
New investigations and simulations indicate that the CRC send by the
device is calculated on correct data, and the data is incorrectly
received by the SPI host controller.
Use flipped instead of original data and update workaround description
in mcp251xfd_regmap_crc_read().
[1] mcp2517fd: DS80000792C: "Incorrect CRC for certain READ_CRC commands"
[2] mcp2518fd: DS80000789C: "Incorrect CRC for certain READ_CRC commands"
Link: https://lore.kernel.org/all/DM4PR11MB53901D49578FE265B239E55AFB7C9@DM4PR11MB5390.namprd11.prod.outlook.com
Fixes: c7eb923c3c ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Kopp <thomas.kopp@microchip.com>
[mkl: split into 2 patches, update patch description and documentation]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The mcp251xfd compatible chips have an erratum ([1], [2]), where the
received CRC doesn't match the calculated CRC. In commit
c7eb923c3c ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work
around broken CRC on TBC register") the following workaround was
implementierend.
- If a CRC read error on the TBC register is detected and the first
byte is 0x00 or 0x80, the most significant bit of the first byte is
flipped and the CRC is calculated again.
- If the CRC now matches, the _original_ data is passed to the reader.
For now we assume transferred data was OK.
Measurements on the mcp2517fd show that the workaround is applicable
not only of the lowest byte is 0x00 or 0x80, but also if 3 least
significant bits are set.
Update check on 1st data byte and workaround description accordingly.
[1] mcp2517fd: DS80000792C: "Incorrect CRC for certain READ_CRC commands"
[2] mcp2518fd: DS80000789C: "Incorrect CRC for certain READ_CRC commands"
Link: https://lore.kernel.org/all/DM4PR11MB53901D49578FE265B239E55AFB7C9@DM4PR11MB5390.namprd11.prod.outlook.com
Fixes: c7eb923c3c ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register")
Cc: stable@vger.kernel.org
Reported-by: Pavel Modilaynen <pavel.modilaynen@volvocars.com>
Signed-off-by: Thomas Kopp <thomas.kopp@microchip.com>
[mkl: split into 2 patches, update patch description and documentation]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Use correct bittiming limits depending on device. For devices based on
USBcanII, Leaf M32C or Leaf i.MX28.
Fixes: 080f40a6fa ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Fixes: b4f20130af ("can: kvaser_usb: add support for Kvaser Leaf v2 and usb mini PCIe")
Fixes: f5d4abea3c ("can: kvaser_usb: Add support for the USBcan-II family")
Link: https://lore.kernel.org/all/20220603083820.800246-4-extja@kvaser.com
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
[mkl: remove stray netlink.h include]
[mkl: keep struct can_bittiming_const kvaser_usb_flexc_bittiming_const in kvaser_usb_hydra.c]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The firmware of M32C based Leaf devices expects bittiming parameters
calculated for 16MHz clock. Since we use the actual clock frequency of
the device, the device may end up with wrong bittiming parameters,
depending on user requested parameters.
This regression affects M32C based Leaf devices with non-16MHz clock.
Fixes: fb12797ab1 ("can: kvaser_usb: get CAN clock frequency from device")
Link: https://lore.kernel.org/all/20220603083820.800246-3-extja@kvaser.com
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Unify and move compile-time known information into new struct
kvaser_usb_driver_info, in favor of run-time checks.
All Kvaser USBcanII supports listen-only mode and error counter
reporting.
Link: https://lore.kernel.org/all/20220603083820.800246-2-extja@kvaser.com
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
[mkl: move struct kvaser_usb_driver_info into kvaser_usb_core.c]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
During a reset, there may have been transmits in flight that are no
longer valid and cannot be fulfilled. Resetting and clearing the
queues is insufficient; each skb also needs to be explicitly freed
so that upper levels are not left waiting for confirmation of a
transmit that will never happen. If this happens frequently enough,
the apparent backlog will cause TCP to begin "congestion control"
unnecessarily, culminating in permanently decreased throughput.
Fixes: d7c0ef36bd ("ibmvnic: Free and re-allocate scrqs when tx/rx scrqs change")
Tested-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Rick Lindsley <ricklind@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 1be37d3b04 ("can: m_can: fix periph RX path: use
rx-offload to ensure skbs are sent from softirq context") the RX path
for peripheral devices was switched to RX-offload.
Received CAN frames are pushed to RX-offload together with a
timestamp. RX-offload is designed to handle overflows of the timestamp
correctly, if 32 bit timestamps are provided.
The timestamps of m_can core are only 16 bits wide. So this patch
shifts them to full 32 bit before passing them to RX-offload.
Link: https://lore.kernel.org/all/20220612211410.4081390-1-mkl@pengutronix.de
Fixes: 1be37d3b04 ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context")
Cc: <stable@vger.kernel.org> # 5.13
Cc: Torin Cooper-Bennun <torin@maxiluxsystems.com>
Reviewed-by: Chandrasekar Ramakrishnan <rcsekar@samsung.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In commit df06fd6782 ("can: m_can: m_can_chip_config(): enable and
configure internal timestamps") the timestamping in the m_can core
should be enabled. In peripheral mode, the RX'ed CAN frames, TX
compete frames and error events are sorted by the timestamp.
The above mentioned commit however forgot to enable the timestamping.
Add the missing bits to enable the timestamp counter to the write of
the Timestamp Counter Configuration register.
Link: https://lore.kernel.org/all/20220612212708.4081756-1-mkl@pengutronix.de
Fixes: df06fd6782 ("can: m_can: m_can_chip_config(): enable and configure internal timestamps")
Cc: <stable@vger.kernel.org> # 5.13
Cc: Torin Cooper-Bennun <torin@maxiluxsystems.com>
Reviewed-by: Chandrasekar Ramakrishnan <rcsekar@samsung.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In grcan_probe(), of_find_node_by_path() has already increased the
refcount. There is no need to call of_node_get() again, so remove it.
Link: https://lore.kernel.org/all/20220619070257.4067022-1-windhl@126.com
Fixes: 1e93ed26ac ("can: grcan: grcan_probe(): fix broken system id check for errata workaround needs")
Cc: stable@vger.kernel.org # v5.18
Cc: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The gs_usb driver appears to suffer from a malady common to many USB
CAN adapter drivers in that it performs usb_alloc_coherent() to
allocate a number of USB request blocks (URBs) for RX, and then later
relies on usb_kill_anchored_urbs() to free them, but this doesn't
actually free them. As a result, this may be leaking DMA memory that's
been used by the driver.
This commit is an adaptation of the techniques found in the esd_usb2
driver where a similar design pattern led to a memory leak. It
explicitly frees the RX URBs and their DMA memory via a call to
usb_free_coherent(). Since the RX URBs were allocated in the
gs_can_open(), we remove them in gs_can_close() rather than in the
disconnect function as was done in esd_usb2.
For more information, see the 928150fad4 ("can: esd_usb2: fix memory
leak").
Link: https://lore.kernel.org/all/alpine.DEB.2.22.394.2206031547001.1630869@thelappy
Fixes: d08e973a77 ("can: gs_usb: Added support for the GS_USB CAN devices")
Cc: stable@vger.kernel.org
Signed-off-by: Rhett Aultman <rhett.aultman@samsara.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
On R-Car V3U, this driver should use suitable register offset instead of
other SoCs' one. Otherwise, data transmission failed on R-Car V3U.
Fixes: 45721c406d ("can: rcar_canfd: Add support for r8a779a0 SoC")
Link: https://lore.kernel.org/all/20220704074611.957191-1-yoshihiro.shimoda.uh@renesas.com
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This reverts commit 05ca14fdb6.
On early silicon engineering samples observed bit shrinking issue when
we use brp as 1. Hence updated brp_min as 2. As in production silicon
this issue is fixed, so reverting the patch.
Link: https://lore.kernel.org/all/20220609082433.1191060-2-srinivas.neeli@xilinx.com
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Jakub Kicinski says:
====================
docs: netdev: document more of our rules
The patch series length limit and reverse xmas tree are not documented.
Add those, and a tl;dr section summarizing how we differ.
v2: improve the series length blurb (Andrew)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Summarize the rules we see broken most often and which may
be less familiar to kernel devs who are used to working outside
of netdev.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to the 15 patch rule the reverse xmas tree is not
documented.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
We had been asking people to avoid massive patch series but it does
not appear in the FAQ.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit d5f9023fa6 ("can: bcm: delay release of struct bcm_op
after synchronize_rcu()") Thadeu Lima de Souza Cascardo introduced two
synchronize_rcu() calls in bcm_release() (only once at socket close)
and in bcm_delete_rx_op() (called on removal of each single bcm_op).
Unfortunately this slow removal of the bcm_op's affects user space
applications like cansniffer where the modification of a filter
removes 2048 bcm_op's which blocks the cansniffer application for
40(!) seconds.
In commit 181d444790 ("can: gw: use call_rcu() instead of costly
synchronize_rcu()") Eric Dumazet replaced the synchronize_rcu() calls
with several call_rcu()'s to safely remove the data structures after
the removal of CAN ID subscriptions with can_rx_unregister() calls.
This patch adopts Erics approach for the can-bcm which should be
applicable since the removal of tasklet_kill() in bcm_remove_op() and
the introduction of the HRTIMER_MODE_SOFT timer handling in Linux 5.4.
Fixes: d5f9023fa6 ("can: bcm: delay release of struct bcm_op after synchronize_rcu()") # >= 5.4
Link: https://lore.kernel.org/all/20220520183239.19111-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Cc: Eric Dumazet <edumazet@google.com>
Cc: Norbert Slusarek <nslusarek@gmx.net>
Cc: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In vma destruction, the following race may occur:
Thread 1: Thread 2:
i915_vma_destroy();
...
list_del_init(vma->vm_link);
...
mutex_unlock(vma->vm->mutex);
__i915_vm_release();
release_references();
And in release_reference() we dereference vma->vm to get to the
vm gt pointer, leading to a use-after free.
However, __i915_vm_release() grabs the vm->mutex so the vm won't be
destroyed before vma->vm->mutex is released, so extract the gt pointer
under the vm->mutex to avoid the vma->vm dereference in
release_references().
v2: Fix a typo in the commit message (Andi Shyti)
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5944
Fixes: e1a7ab4fca ("drm/i915: Remove the vm open count")
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.con>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220620123659.381772-1-thomas.hellstrom@linux.intel.com
The USBH composed of EHCI and OHCI controllers needs the PHY clock to be
initialized first, before enabling (gating) them. The reverse is also
required when going to suspend.
So, add USBPHY clock as 1st entry in both controllers, so the USBPHY PLL
gets enabled 1st upon controller init. Upon suspend/resume, this also makes
the clock to be disabled/re-enabled in the correct order.
This fixes some IRQ storm conditions seen when going to low-power, due to
PHY PLL being disabled before all clocks are cleanly gated.
Fixes: 949a0c0dec ("ARM: dts: stm32: add USB Host (USBH) support to stm32mp157c")
Fixes: db7be2cb87 ("ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Delete the node fixed clock managed by secure world with SCMI.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
LSE clock is provided by SCMI.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Dmitry Baryshkov
Abhinav Kumar
Linus Torvalds
Guillaume Ranquet
Bo-Chen Chen
Markus Schneider-Pargmann
Hsin-Yi Wang
Paul Cercueil
Arnd Bergmann
Bill Wendling
Takashi Iwai
Egor Vorontsov
Tim Crawford
John Veness
Jason A. Donenfeld
Marc Kleine-Budde
Thomas Kopp
Jimmy Assarsson
Rick Lindsley
Liang He
Rhett Aultman
Duy Nguyen
Srinivas Neeli
David S. Miller
Jakub Kicinski
Oliver Hartkopp
Thomas Hellström
Fabrice Gasnier
Gabriel Fernandez