Move dcn32_calculate_wm_and_dlg from dcn32 resources to the FPU code.
Additionally, this commit adds an interface to it.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It looks like many of the code related to SubVP uses FPU operation, and
we have many static functions that are part of this feature. This commit
is a little bit large, but it only moves SubVP operation from one file
to another, and I had to do it in a single change due to dependencies
between functions.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit moves phanton FPU stream to dcn32_fpu file.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The insert_entry_into_table_sorted function uses FPU operation and calls
other static functions support. This commit moves the insert entry
function with all the required struct and static functions to the FPU
file.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This simplifies existing coherence handling for Arcturus and Aldabaran
to account for !coherent && uncached scenarios.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current approach breaks S3/S4 as asic reset is needed for them.
And putting SMU out of service(via SMU_MSG_PrepareMp1ForUnload) will make
that(asic reset) failed. Considering with current designs, there is
actually also asic reset involved on driver reloading. That can make
asic back to a clean state. So, the SMU_MSG_PrepareMp1ForUnload operation
will be not so necessary. Thus we will just drop the SMU_MSG_PrepareMp1ForUnload
operation. We may revise the whole driver reloading sequences when there
is a better design.
Fixes: 72aeb6ee0c ("drm/amd/pm: fix driver reload SMC firmware fail issue for smu13")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only PP_MP1_STATE_UNLOAD is supported for now. For other mp1 state, we
should just ignore it. Otherwise, there will be errors coming out.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To fit the latest 78.49.0 PMFW. Also, bump the version
to 0x2B.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The feature is ready with latest firmwares.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function dcn32_predict_pipe_split uses FPU operations. This commit
moves this function to the dcn32_fpu file, and we ensure that we only
invoke it under the kernel_fpu protection.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
It's useful to disable MPO when debugging or testing. Therefore, add a
dcdebugmask option to disable MPO.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Being able to configure visual confirm at boot or in cmdline is helpful
when debugging.
[How]
Add a module parameter to configure DC visual confirm, which works the
same way as the equivalent debugfs entry.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function dcn32_helper_populate_phantom_dlg_params uses FPU
operations. For this reason, this commit moves this function to the
dcn32_fpu file, and we ensure that we only invoke it under the
kernel_fpu protection.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are working to isolate FPU operations inside the DML folder, and the
file dcn32_clk_mgr has some of these operations. This commit moves the
FPU operations inside the clock manager and creates the dcn32_fpu file
to aggregate those operations. Note that there is no functional change
ere, just moving code from one part to another.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit e7ef5569e71bf3fec01ea513c27c6081c0dbbc64.
Idle optimization was disabled due to SMU and firmware bugs. Enable it
back for DCN32. DCN321 has them enabled already
Fixes: 6a640b95b0 ("drm/amd/display: disable idle optimizations")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-and-tested-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Unbounded request logic in resource/DML has some issues where unbounded
request is being enabled incorrectly. SW today enables unbounded request
unconditionally in hardware, on the assumption that HW can always
support it in single pipe scenarios.
This worked until now because the same assumption is made in DML. A new
DML update is needed to fix a bug, where there are single pipe scenarios
where unbounded cannot be enabled, and this change in DML needs to be
ported in, and dcn32 resource logic fixed.
[how]
First, dcn32_resource should program unbounded req in HW according to
unbounded req enablement output from DML, as opposed to DML input.
Second, port in DML update which disables unbounded req in some
scenarios to fix an issue with poor stutter performance
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Cursor size can update without MALL cache update.
Update the register on cursor attribute as well.
[How]
Update cursor MALL cache on cursor attribute update.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The double `to' is duplicated in the comment, remove one.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The double `have' is duplicated in line 696, remove one.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding dm ip block to enable display on dcn 3.1.4.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN 3.1.4 uses dmub not dmcu. Attempt to identify
dmcu firmware for dcn314 results in dm init error:
"Unsupported ASIC type"
[How]
Add dcn314 to the list of asics that don't require dmcu
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
There are cases where the pipes populated are not all at the top
of the pipes list under context. Loop through all pipes for DET
allocation instead of just the number of populated ones, even if
some unpopulated pipes are iterated through unnecessarily.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
VM enabled in IP configuration causes UCLK not
reaching DPM0. The expectation for VM enable should
be that KMD will indicate to DAL when VM is enabled,
then DAL will set the bit accordingly
[How]
Set gpuvm_enable to zero in DCN3_20 and DCN3_21 resource.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a GFXOFF section at "GPU Power Controls" file, explaining what it is
and how userspace can interact with it.
v2: minor tweaks to the documenation (Alex)
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFXOFF has two different "state" values: one to define if the GPU is
allowed/disallowed to enter GFXOFF, usually called state; and another
one to define if currently GFXOFF is being used, usually called status.
Even when GFXOFF is allowed, GPU firmware can decide to not used it
accordingly to the GPU load.
Userspace can allow/disallow GPUs to enter into GFXOFF via debugfs. The
kernel maintains a counter of requests for GFXOFF (gfx_off_req_count)
that should be decreased to allow GFXOFF and increased to disallow.
The issue with this interface is that userspace can't be sure if GFXOFF
is currently allowed. Even by checking amdgpu_gfxoff file, one might get
an ambiguous 2, that means that GPU is currently out of GFXOFF, but that
can be either because it's currently disallowed or because it's allowed
but given the current GPU load it's enabled. Then, userspace needs to
rely on the fact that GFXOFF is enabled by default on boot and to track
this information.
To make userspace life easier and GFXOFF more reliable, return the
current state of GFXOFF to userspace when reading amdgpu_gfxoff with the
same semantics of writing: 0 means not allowed, not 0 means allowed.
Expose the current status of GFXOFF through a new file,
amdgpu_gfxoff_status.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Although dcn31_update_soc_for_wm_a() is only called in dml/dcn31/dcn31_fpu by
dc->res_pool->funcs->update_soc_for_wm_a(dc, context), it's declared in
dcn31_resource that is not FPU protected. Move this function to dcn31_fpu
file as part of the work to isolate FPU code.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the variable MaxUsedBW from the function
DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerformanceCalculation.
As a side-effect, the variables MaxPerPlaneVActiveWRBandwidth and
WRBandwidth are also removed.
This was pointed by clang with the following warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/display_mode_vba_30.c:3043:10:
warning: variable 'MaxUsedBW' set but not used [-Wunused-but-set-variable]
double MaxUsedBW = 0;
^
1 warning generated.
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variable regval from the function enc1_update_generic_info_packet
and the variables dynamic_range_rgb and dynamic_range_ycbcr from the
function enc1_stream_encoder_dp_set_stream_attribute are not currently
used.
This was pointed by clang with the following warnings:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_stream_encoder.c:62:11:
warning: variable 'regval' set but not used [-Wunused-but-set-variable]
uint32_t regval;
^
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_stream_encoder.c:262:10:
warning: variable 'dynamic_range_rgb' set but not used [-Wunused-but-set-variable]
uint8_t dynamic_range_rgb = 0; /*full range*/
^
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_stream_encoder.c:263:10:
warning: variable 'dynamic_range_ycbcr' set but not used [-Wunused-but-set-variable]
uint8_t dynamic_range_ycbcr = 1; /*bt709*/
^
3 warnings generated.
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the variables dispclk_delay_subtotal and dppclk_delay_subtotal from
the function dml_rq_dlg_get_dlg_params.
This was pointed by clang with the following warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_rq_dlg_calc_31.c:920:15:
warning: variable 'dispclk_delay_subtotal' set but not used [-Wunused-but-set-variable]
unsigned int dispclk_delay_subtotal;
^
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_rq_dlg_calc_31.c:919:15:
warning: variable 'dppclk_delay_subtotal' set but not used [-Wunused-but-set-variable]
unsigned int dppclk_delay_subtotal;
^
2 warnings generated.
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the unused unsigned int NumberOfStates from the file, which was
declared but never hooked up.
This was pointed by clang with the following warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:33:27:
warning: unused variable 'NumberOfStates' [-Wunused-const-variable]
static const unsigned int NumberOfStates = DC__VOLTAGE_STATES;
^
1 warning generated.
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove dml32_CalculatedoublePipeDPPCLKAndSCLThroughput function, which is not used in
the codebase.
This was pointed by clang with the following warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:393:6:
warning: no previous prototype for function
'dml32_CalculatedoublePipeDPPCLKAndSCLThroughput' [-Wmissing-prototypes]
void dml32_CalculatedoublePipeDPPCLKAndSCLThroughput(
^
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:393:1:
note: declare 'static' if the function is not intended to be used outside of
this translation unit
void dml32_CalculatedoublePipeDPPCLKAndSCLThroughput(
^
static
1 warning generated.
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the variable clk_src from the function dcn3_get_pix_clk_dividers.
This was pointed by clang with the following warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_clock_source.c:1279:25: warning:
variable 'clk_src' set but not used [-Wunused-but-set-variable]
struct dce110_clk_src *clk_src;
^
1 warning generated.
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For certain MPO configurations, DML will split a pipe after DET buffer has
already been allocated by driver, resulting in allocation of more DET
segments than the configurable return buffer has, causing underflow.
[How]
Determine during DET override calculation whether or not a pipe will be
split later on by DML, and distribute DET segments based on expected
number of pipes.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
In general cases we want to keep the dram clock change requirement (we
prefer configs that support MCLK switch). Only override to false for
SubVP.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We want to calculate the DTB clock values when DSC is enabled; however,
this is not the current behavior implemented in DCN32. Right now, DML is
trying to calculate DSC values even if DSC is disabled; as a result, we
can have a hard hang due to wrong clock calculation. This commit fixes
this issue by moving the calculation after the DSC check.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Number of DSC slices is an input to DML with high dependency
on display specific capability. This isn't something DML can decide
on its own. DML has to use the original number of DSC slices input
to DML during validation without modification. Otherwise the
computed DSC delay will not reflect the current configuration
and therefore causes validation failures.
[how]
Remove DML override for number of DSC slices parameter.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The amdgpu_dm file contains most of the code that works as an interface
between DRM API and DC. As a result, this file becomes very large since
it comprises multiple abstractions such as CRTC manipulation.
[How]
This commit extracts the CRTC code to its specific file named
amdgpu_dm_crtc. This change does not change anything inside the
functions; the only exception is converting some static functions to a
global function.
v2: fix ifdef merge mix up (Alex)
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- All related to the Small BAR support: (and all by Matt Auld)
* add probed_cpu_visible_size
* expose the avail memory region tracking
* apply ALLOC_GPU only by default
* add NEEDS_CPU_ACCESS hint
* tweak error capture on recoverable contexts
Driver highlights:
- Add Small BAR support (Matt)
- Add MeteorLake support (RK)
- Add support for LMEM PCIe resizable BAR (Akeem)
Driver important fixes:
- ttm related fixes (Matt Auld)
- Fix a performance regression related to waitboost (Chris)
- Fix GT resets (Chris)
Driver others:
- Adding GuC SLPC selftest (Vinay)
- Fix ADL-N GuC load (Daniele)
- Add platform workaround (Gustavo, Matt Roper)
- DG2 and ATS-M device ID updates (Matt Roper)
- Add VM_BIND doc rfc with uAPI documentation (Niranjana)
- Fix user-after-free in vma destruction (Thomas)
- Async flush of GuC log regions (Alan)
- Fixes in selftests (Chris, Dan, Andrzej)
- Convert to drm_dbg (Umesh)
- Disable OA sseu config param for newer hardware (Umesh)
- Multi-cast register steering changes (Matt Roper)
- Add lmem_bar_size modparam (Priyanka)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmLPOTUACgkQ+mJfZA7r
E8rnPQf+NcelYE/Zmt5ExAkBoqECHBHvWbAZsJ4Ve7pxFQMoCn1vMWcpzHhizD8m
ga9ZLQ8cURcNst0Zrc73LLNPtZyqGu3tn9dhw+atIkmFjb4nJ40gvSyEwuPVOYiD
Z0JjcmU9cUfPiYTadHoY+yYGPh9LkF61nOxVZdEJ/ykeQZ1ThgDlFRpjfw7pteMp
SET3Iy1pZXGlJMmlOU9fJXivyN3yO6fO8xY2mqhiPbtf/HUapVpovNYleYBtJt3i
zS52DnuGGsC/gY+rhKfaQE/BfsXBhQK5fy39oZLKRz8uL7PXzYVV6bMAwnODqPwq
Q5+4C2J9M8jChfrkRJyD0TK6U80Zlw==
=l7gi
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-gt-next-2022-07-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Driver uAPI changes:
- All related to the Small BAR support: (and all by Matt Auld)
* add probed_cpu_visible_size
* expose the avail memory region tracking
* apply ALLOC_GPU only by default
* add NEEDS_CPU_ACCESS hint
* tweak error capture on recoverable contexts
Driver highlights:
- Add Small BAR support (Matt)
- Add MeteorLake support (RK)
- Add support for LMEM PCIe resizable BAR (Akeem)
Driver important fixes:
- ttm related fixes (Matt Auld)
- Fix a performance regression related to waitboost (Chris)
- Fix GT resets (Chris)
Driver others:
- Adding GuC SLPC selftest (Vinay)
- Fix ADL-N GuC load (Daniele)
- Add platform workaround (Gustavo, Matt Roper)
- DG2 and ATS-M device ID updates (Matt Roper)
- Add VM_BIND doc rfc with uAPI documentation (Niranjana)
- Fix user-after-free in vma destruction (Thomas)
- Async flush of GuC log regions (Alan)
- Fixes in selftests (Chris, Dan, Andrzej)
- Convert to drm_dbg (Umesh)
- Disable OA sseu config param for newer hardware (Umesh)
- Multi-cast register steering changes (Matt Roper)
- Add lmem_bar_size modparam (Priyanka)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Ys85pcMYLkqF/HtB@intel.com
[Why]
The amdgpu_dm file contains most of the code that works as an interface
between DRM API and DC. As a result, this file becomes very large since
it comprises multiple abstractions such as plane manipulation.
[How]
This commit extracts the plane code to its specific file named
amdgpu_dm_plane. This change does not change anything inside the
functions; the only exception is converting some static functions to a
global function.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
In order to leverage igt tool to maintain mst feature, expose new
debugfs entry "mst_progress_status".
In our dm flow, record down the result of each phase of mst and user
can examine the mst result by checking whether each phase get completed
successfully.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add "is_mst_connector" debugfs entry to help distinguish whether
a connector is in a mst topology or not.
Access it with the following command:
cat /sys/kernel/debug/dri/0/DP-X/is_mst_connector
Result:
- "root" stands for the root connector of the topology
- "branch" stands for branch device of the topology
- "end" stands for leaf node connector of the topology
- "no" stands for the connector is not a device of a mst topology
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Correct few problems below to have debugfs trigger_hotplug entry
supports mst case
* Adjust the place for acquiring the hpd_lock. We'll also access
dc_link when simulate unplug
* When detect the connector is a mst root, call
reset_cur_dp_mst_topology() to simulate unplug
* Don't support hotplug caused by CSN message since we can't change
mst topology info directly. We can't simulate that
* Clean up redundant code
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Need to leverage this function out of dc_link.c. Change it to public.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rodrigo Siqueira
Rajneesh Bhardwaj
Chengming Gui
Evan Quan
Kenneth Feng
YiPeng Chai
Leo Li
Alex Deucher
Aurabindo Pillai
Jun Lei
Chris Park
Jason Wang
Roman Li
Taimur Hassan
Vladimir Stempen
André Almeida
Melissa Wen
Maíra Canal
Alvin Lee
Wenjing Liu
Dave Airlie
Wayne Lin