Add VCN_5_0_0 IP init, ring functions, DPG support.
v2: squash in warning fixes (Alex)
v3: squash in block and ring init, boot, doorbell enablement,
DPG support (Alex)
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
implement new RAS ACA driver code framework.
v2:
- rename aca_bank_set to aca_banks.
- rename aca_source_xxx to aca_handle_xxx.
v3:
Optimize some function implementation details. (from Hawking's suggestion)
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Developed a new driver which allocates a 64bit memory on
each request in sequence order. At the moment, user queue
fence memory is the main consumer of this seq64 driver.
v2: Worked on review comments from Christian for the following
modifications
- Move driver name from "semaphore" to "seq64"
- Remove unnecessary PT/PD mapping
- Move enable_mes check into init/fini functions.
v3: Worked on review comments from Christian
- drop enable_mes check
- use DECLARE_BITMAP for bit array
- added kerneldoc for seq64
v4: Worked on review comments from Christian
- Rename amdgpu_seq64_get name with amdgpu_seq64_alloc
v5: Worked on review comments from Christian
- Fix seq64 lockdep warning
- move fpriv->seq64_va check into amdgpu_seq64_unmap()
- make the function amdgpu_seq64_unmap() return as void.
- reserve the buffers as not interruptible.
v6: port to drm_exec (Alex)
v7: disable for now (Arun)
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add basic data structure, dummy ring functions
and ip functions for UMSCH.
Implement sw_init(ring_init and init_microcodede) and
hw_init(load_microcode), UMSCH can boot up now.
Implement hw_init(ring_start) and hw_fini(ring_stop),
UMSCH is ready for command submission now.
Implement set_hw_resources and add/remove_queue,
UMSCH is ready for scheduling now.
Aggregated doorbell is used to notify UMSCH FW that
there is unmapped queue with corresponding priority level
(e.g., AGDB[0] for Real time band, etc.) is updating its job.
v2: squash together initial patches to avoid breaking the
build (Alex)
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add skeleton driver code. (Ray)
Add initial support for Video Processing Engine. (Lang)
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add initial implementation for mmhub 3.3.0.
v2: squash in client id fix (Alex)
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add initial support for IH 6.1.
v2: Fix copyright date (Alex)
Signed-off-by: Ben Li <ben.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch:
- creates a new file for doorbell management.
- moves doorbell code from amdgpu_device.c to this file.
V2:
- remove doc from function declaration (Christian)
- remove 'device' from function names to make it consistent (Alex)
- add SPDX license identifier (Luben)
V3:
- change license to MIT license(Christian)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We have a clean build with W=1 as of
commit c168feed5d ("drm/amd/display/amdgpu_dm/amdgpu_dm_helpers: Move
SYNAPTICS_DEVICE_ID into CONFIG_DRM_AMD_DC_DCN ifdef"). So, let's enable
these checks unconditionally for the entire module to catch these errors
during development.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-Wunused-but-set-variable was only supported in clang starting with
13.0.0, so earlier versions will emit a warning, which is turned into a
hard error for the kernel to mirror GCC:
error: unknown warning option '-Wunused-but-set-variable'; did you mean '-Wunused-const-variable'? [-Werror,-Wunknown-warning-option]
The minimum supported version of clang for building the kernel is
11.0.0, so match the rest of the kernel and wrap
-Wunused-but-set-variable in a cc-option call, so that it is only used
when supported by the compiler.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1869
Fixes: 1b320ad3f5 ("drm/amd/amdgpu: introduce DRM_AMDGPU_WERROR")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We want to do -Werror builds on our CI. However, non-amdgpu breakages
have prevented us from doing so thus far. Also, there are a number of
additional checks that we should enable, that the community cares about
and are hidden behind -Wextra. So, define DRM_AMDGPU_WERROR to only
enable -Werror for the amdgpu kernel module and enable -Wextra while
disabling all of the checks that are too noisy.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Kenny Ho <kenny.ho@amd.com>
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Kenny Ho <Kenny.Ho@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Within a device, an accelerator core partition can be constituted with
different IP instances. These partitions are spatial in nature. Number
of partitions which can exist at the same time depends on the 'partition
mode'. Add a manager entity which is responsible for switching between
different partition modes and maintaining partitions. It is also
responsible for suspend/resume of different partitions.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Four basic reasons as below to do the change:
1. number of ring expand a lot on aqua_vanjaram, and adjustment on old
assignment cannot make each ring in a continuous doorbell space.
2. the SDMA doorbell index should not exceed 0x1FF on aqua_vanjaram due to
regDOORBELLx_CTRL_ENTRY.BIF_DOORBELLx_RANGE_OFFSET_ENTRY field width.
3. re-design the doorbell assignment and unify the calculation as
"start + ring/inst id" will make the code much concise.
4. only defining the START/END makes the table look simple
v2: (Lijo)
1. replace name
2. use num_inst_per_aid/sdma_doorbell_range instead of hardcoding
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New GC (v9.4.3) and ATHUB (v1.8.0) versions
are used. Add kgd_gfx_v9_4_3_*
functions if registers in use of kgd_gfx_v9_*
functions are changed or have different offset.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
all the gc v9_4_3 registers fall in gc_rlcpdec address range
have different relative offsets and base_idx from the ones
defined in gc v9_0 ip headers. gc_v9_0_rlc_funcs can not be
reused anymore for gc v9_4_3
v2: drop unused handshake function (Alex)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hack the mmhub 1.7 reg offset for initial support
v2: squash in header switch, CG funcs (Alex)
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize hdp ras block only when mmhub ip block
supports ras features. Driver queries ras capabilities
after early_init, ras block init needs to be moved to
sw_init.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize mmhub ras block only when mmhub ip block
supports ras features. Driver queries ras capabilities
after early_init, ras block init needs to be moved to
sw_init.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for SDMA 4.4.2.
v1: Create sdma_v4_4_2.[c|h] for initial support (Le)
v2: update amdgpu_ring_init call with atomic score (Hawking)
v3: Squash in sdma_start fixes (Alex)
v4: Comment out currently unused RAS code (Alex)
Signed-off-by: Le Ma <le.ma@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The path for the "mod_info_packet.h" header file is
incomplete, so add its location to the header search path
in the amdgpu Makefile.
See on ARCH=alpha (275 times in one build).
In file included from ../drivers/gpu/drm/amd/amdgpu/amdgpu.h:90,
from ../drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c:43:
../drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.h:62:10: fatal error: mod_info_packet.h: No such file or directory
62 | #include "mod_info_packet.h"
| ^~~~~~~~~~~~~~~~~~~
compilation terminated.
Fixes: 5b49da02dd ("drm/amd/display: Enable Freesync over PCon")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add gfx ras function on gfx v11_0_3.
V2:
1. Add separate source files for gfx v11_0_3.
2. Create a common function to initialize gfx ras block.
V3:
1. Rename amdgpu_gfx_ras_block_init to amdgpu_gfx_ras_sw_init.
2. Adjust the calling position of amdgpu_gfx_ras_sw_init.
3. Remove gfx_v11_0_3_ras_ops.
V4:
Revert changes in amdgpu_ras_interrupt_poison_consumption_handler.
V5:
1. Remove invalid include file in gfx_v11_0_3.c.
2. Reduce the number of parameters of amdgpu_gfx_ras_sw_init.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The software ring is created to support priority context while there is only
one hardware queue for gfx.
Every software ring has its fence driver and could be used as an ordinary ring
for the GPU scheduler.
Multiple software rings are bound to a real ring with the ring muxer. The
packages committed on the software ring are copied to the real ring.
v2: Use array to store software ring entry.
v3: Remove unnecessary prints.
v4: Remove amdgpu_ring_sw_init/fini functions,
using gtt for sw ring buffer for later dma copy
optimization.
v5: Allocate ring entry dynamically in the muxer.
v6: Update comments for the ring muxer.
v7: Modify for function naming.
v8: Combine software ring functions into amdgpu_ring_mux.c
v9: Use kernel-doc comment on the get_rptr function.
Cc: Christian Koenig <Christian.Koenig@amd.com>
Cc: Luben Tuikov <Luben.Tuikov@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Jiadong.Zhu <Jiadong.Zhu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All gc v11_0_3 registers in gcvml2 range have different
register offset from the ones in gc v11_0_0. v11_0_3
imu_rlc_ram programming has to be separated from v11_0_0
implementation
v2: fix checkpatch errors (Alex)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To meet the requirement for multi container usecase which needs
a quicker reset and not causing VRAM lost, adding the Mode2
reset handler for sienna_cichlid.
v2: move skip mode2 flag part separately
v3: remove the use of asic_reset_res
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
