To make sure that we don't unintentionally perform any unclocked and/or
unpowered R/W operation on GPU registers, before turning off clocks and
regulators we must make sure that no GPU, JOB or MMU ISR execution is
pending: doing that requires to add a mechanism to synchronize the
interrupts on suspend.
Add functions panfrost_{gpu,job,mmu}_suspend_irq() which will perform
interrupts masking and ISR execution synchronization, and then call
those in the panfrost_device_runtime_suspend() handler in the exact
sequence of job (may require mmu!) -> mmu -> gpu.
As a side note, JOB and MMU suspend_irq functions needed some special
treatment: as their interrupt handlers will unmask interrupts, it was
necessary to add an `is_suspended` bitmap which is used to address the
possible corner case of unintentional IRQ unmasking because of ISR
execution after a call to synchronize_irq().
At resume, clear each is_suspended bit in the reset path of JOB/MMU
to allow unmasking the interrupts.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204114215.54575-4-angelogioacchino.delregno@collabora.com
Some SoCs may be equipped with a GPU containing two core groups
and this is exactly the case of Samsung's Exynos 5422 featuring
an ARM Mali-T628 MP6 GPU: the support for this GPU in Panfrost
is partial, as this driver currently supports using only one
core group and that's reflected on all parts of it, including
the power on (and power off, previously to this patch) function.
The issue with this is that even though executing the soft reset
operation should power off all cores unconditionally, on at least
one platform we're seeing a crash that seems to be happening due
to an interrupt firing which may be because we are calling power
transition only on the first core group, leaving the second one
unchanged, or because ISR execution was pending before entering
the panfrost_gpu_power_off() function and executed after powering
off the GPU cores, or all of the above.
Finally, solve this by:
- Avoid to enable the power transition interrupt on reset; and
- Ignoring the core_mask and ask the GPU to poweroff both core groups
Fixes: 22aa1a2090 ("drm/panfrost: Really power off GPU cores in panfrost_gpu_power_off()")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204114215.54575-2-angelogioacchino.delregno@collabora.com
It was noticed when setting the Panfrost's DVFS device to the performant
governor, GPU frequency as reported by fdinfo had dropped to 0 permamently.
There are two separate issues causing this behaviour:
- Not initialising the device's current_frequency variable to its original
value during device probe().
- Updating said variable in Panfrost devfreq's get_dev_status() rather
than after the new OPP's frequency had been retrieved in target(), which
meant the old frequency would be assigned instead.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Fixes: f11b0417ee ("drm/panfrost: Add fdinfo support GPU load metrics")
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231125205438.375407-3-adrian.larumbe@collabora.com
All of the MediaTek SoCs supported by Panfrost can completely cut power
to the GPU during full system sleep without any user-noticeable delay
in the resume operation, as shown by measurements taken on multiple
MediaTek SoCs (MT8183/86/92/95).
As an example, for MT8195 - a "before" with only runtime PM operations
(so, without turning on/off regulators), and an "after" executing both
the system sleep .resume() handler and .runtime_resume() (so the time
refers to T_Resume + T_Runtime_Resume):
Average Panfrost-only system sleep resume time, before: ~33500ns
Average Panfrost-only system sleep resume time, after: ~336200ns
Keep in mind that this additional ~308200 nanoseconds delay happens only
in resume from a full system suspend, and not in runtime PM operations,
hence it is acceptable.
Measurements were also taken on MT8186, showing a delay of ~312000 ns.
Testing of this happened on all of the aforementioned MediaTek SoCs, but:
MT8183 got tested only by KernelCI with <=10 suspend/resume cycles
MT8186, MT8192, MT8195 were tested manually with over 100 suspend/resume
cycles with GNOME DE (Mutter + Wayland).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231109102543.42971-7-angelogioacchino.delregno@collabora.com
All of the MediaTek SoCs supported by Panfrost can switch the clocks
off and on during system sleep to save some power without any user
experience penalty.
Measurements taken on multiple MediaTek SoCs (MT8183/8186/8192/8195)
show that adding this will not prolong the time that is required to
resume the system in any meaningful way.
As an example, for MT8195 - a "before" with only runtime PM operations
(so, without turning on/off GPU clocks), and an "after" executing both
the system sleep .resume() handler and .runtime_resume() (so the time
refers to T_Resume + T_Runtime_Resume):
Average Panfrost-only system sleep resume time, before: ~28000ns
Average Panfrost-only system sleep resume time, after: ~33500ns
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231109102543.42971-5-angelogioacchino.delregno@collabora.com
Currently, the GPU is being internally powered off for runtime suspend
and turned back on for runtime resume through commands sent to it, but
note that the GPU doesn't need to be clocked during the poweroff state,
hence it is possible to save some power on selected platforms.
Add suspend and resume handlers for full system sleep and then add
a new panfrost_gpu_pm enumeration and a pm_features variable in the
panfrost_compatible structure: BIT(GPU_PM_CLK_DIS) will be used to
enable this power saving technique only on SoCs that are able to
safely use it.
Note that this was implemented only for the system sleep case and not
for runtime PM because testing on one of my MediaTek platforms showed
issues when turning on and off clocks aggressively (in PM runtime)
resulting in a full system lockup.
Doing this only for full system sleep never showed issues during my
testing by suspending and resuming the system continuously for more
than 100 cycles.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231109102543.42971-4-angelogioacchino.delregno@collabora.com
In many cases, soft reset takes more than 1 microsecond, but definitely
less than 10; moreover in the poweron flow, tilers, shaders and l2 will
become ready (each) in less than 10 microseconds as well.
Even in the cases (at least on my platforms, rarely) in which those take
more than 10 microseconds, it's very unlikely to see both soft reset and
poweron to take more than 70 microseconds.
Shorten the polling delay to 10 microseconds to consistently reduce the
runtime resume time of the GPU.
As an indicative example, measurements taken on a MediaTek MT8195 SoC
Average runtime resume time in nanoseconds before this commit:
GDM, user selection up/down: 88435ns
GDM, Text Entry (typing user/password): 91489ns
GNOME Desktop, idling, GKRELLM running: 73200ns
After this commit:
GDM: user selection up/down: 26690ns
GDM: Text Entry (typing user/password): 27917ns
GNOME Desktop, idling, GKRELLM running: 25304ns
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231109102543.42971-3-angelogioacchino.delregno@collabora.com
Even though soft reset should ideally never fail, during development of
some power management features I managed to get some bits wrong: this
resulted in GPU soft reset failures, where the GPU was never able to
recover, not even after suspend/resume cycles, meaning that the only
way to get functionality back was to reboot the machine.
Perform a hard reset after a soft reset failure to be able to recover
the GPU during runtime (so, without any machine reboot).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231109102543.42971-2-angelogioacchino.delregno@collabora.com
The layout of the registers {TILER,SHADER,L2}_PWROFF_LO, used to request
powering off cores, is the same as the {TILER,SHADER,L2}_PWRON_LO ones:
this means that in order to request poweroff of cores, we are supposed
to write a bitmask of cores that should be powered off!
This means that the panfrost_gpu_power_off() function has always been
doing nothing.
Fix powering off the GPU by writing a bitmask of the cores to poweroff
to the relevant PWROFF_LO registers and then check that the transition
(from ON to OFF) has finished by polling the relevant PWRTRANS_LO
registers.
While at it, in order to avoid code duplication, move the core mask
logic from panfrost_gpu_power_on() to a new panfrost_get_core_mask()
function, used in both poweron and poweroff.
Fixes: f3ba91228e ("drm/panfrost: Add initial panfrost driver")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102141507.73481-1-angelogioacchino.delregno@collabora.com
Currently, job flow control is implemented simply by limiting the number
of jobs in flight. Therefore, a scheduler is initialized with a credit
limit that corresponds to the number of jobs which can be sent to the
hardware.
This implies that for each job, drivers need to account for the maximum
job size possible in order to not overflow the ring buffer.
However, there are drivers, such as Nouveau, where the job size has a
rather large range. For such drivers it can easily happen that job
submissions not even filling the ring by 1% can block subsequent
submissions, which, in the worst case, can lead to the ring run dry.
In order to overcome this issue, allow for tracking the actual job size
instead of the number of jobs. Therefore, add a field to track a job's
credit count, which represents the number of credits a job contributes
to the scheduler's credit limit.
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Luben Tuikov <ltuikov89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110001638.71750-1-dakr@redhat.com
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
In Xe, the new Intel GPU driver, a choice has made to have a 1 to 1
mapping between a drm_gpu_scheduler and drm_sched_entity. At first this
seems a bit odd but let us explain the reasoning below.
1. In Xe the submission order from multiple drm_sched_entity is not
guaranteed to be the same completion even if targeting the same hardware
engine. This is because in Xe we have a firmware scheduler, the GuC,
which allowed to reorder, timeslice, and preempt submissions. If a using
shared drm_gpu_scheduler across multiple drm_sched_entity, the TDR falls
apart as the TDR expects submission order == completion order. Using a
dedicated drm_gpu_scheduler per drm_sched_entity solve this problem.
2. In Xe submissions are done via programming a ring buffer (circular
buffer), a drm_gpu_scheduler provides a limit on number of jobs, if the
limit of number jobs is set to RING_SIZE / MAX_SIZE_PER_JOB we get flow
control on the ring for free.
A problem with this design is currently a drm_gpu_scheduler uses a
kthread for submission / job cleanup. This doesn't scale if a large
number of drm_gpu_scheduler are used. To work around the scaling issue,
use a worker rather than kthread for submission / job cleanup.
v2:
- (Rob Clark) Fix msm build
- Pass in run work queue
v3:
- (Boris) don't have loop in worker
v4:
- (Tvrtko) break out submit ready, stop, start helpers into own patch
v5:
- (Boris) default to ordered work queue
v6:
- (Luben / checkpatch) fix alignment in msm_ringbuffer.c
- (Luben) s/drm_sched_submit_queue/drm_sched_wqueue_enqueue
- (Luben) Update comment for drm_sched_wqueue_enqueue
- (Luben) Positive check for submit_wq in drm_sched_init
- (Luben) s/alloc_submit_wq/own_submit_wq
v7:
- (Luben) s/drm_sched_wqueue_enqueue/drm_sched_run_job_queue
v8:
- (Luben) Adjust var names / comments
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://lore.kernel.org/r/20231031032439.1558703-3-matthew.brost@intel.com
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
The drm-stats fdinfo tags made available to user space are drm-engine,
drm-cycles, drm-max-freq and drm-curfreq, one per job slot.
This deviates from standard practice in other DRM drivers, where a single
set of key:value pairs is provided for the whole render engine. However,
Panfrost has separate queues for fragment and vertex/tiler jobs, so a
decision was made to calculate bus cycles and workload times separately.
Maximum operating frequency is calculated at devfreq initialisation time.
Current frequency is made available to user space because nvtop uses it
when performing engine usage calculations.
It is important to bear in mind that both GPU cycle and kernel time numbers
provided are at best rough estimations, and always reported in excess from
the actual figure because of two reasons:
- Excess time because of the delay between the end of a job processing,
the subsequent job IRQ and the actual time of the sample.
- Time spent in the engine queue waiting for the GPU to pick up the next
job.
To avoid race conditions during enablement/disabling, a reference counting
mechanism was introduced, and a job flag that tells us whether a given job
increased the refcount. This is necessary, because user space can toggle
cycle counting through a debugfs file, and a given job might have been in
flight by the time cycle counting was disabled.
The main goal of the debugfs cycle counter knob is letting tools like nvtop
or IGT's gputop switch it at any time, to avoid power waste in case no
engine usage measuring is necessary.
Also add a documentation file explaining the possible values for fdinfo's
engine keystrings and Panfrost-specific drm-curfreq-<keystr> pairs.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230929181616.2769345-3-adrian.larumbe@collabora.com
drm-misc-next for v6.7-rc1:
UAPI Changes:
- Nouveau changed to not set NO_PREFETCH flag explicitly.
Cross-subsystem Changes:
- Update documentation of dma-buf intro and uapi.
- fbdev/sbus fixes.
- Use initializer macros in a lot of fbdev drivers.
- Add Boris Brezillon as Panfrost driver maintainer.
- Add Jessica Zhang as drm/panel reviewer.
- Make more fbdev drivers use fb_ops helpers for deferred io.
- Small hid trailing whitespace fix.
- Use fb_ops in hid/picolcd
Core Changes:
- Assorted small fixes to ttm tests, drm/mst.
- Documentation updates to bridge.
- Add kunit tests for some drm_fb functions.
- Rework drm_debugfs implementation.
- Update xe documentation to mark todos as completed.
Driver Changes:
- Add support to rockchip for rv1126 mipi-dsi and vop.
- Assorted small fixes to nouveau, bridge/samsung-dsim,
bridge/lvds-codec, loongson, rockchip, panfrost, gma500, repaper,
komeda, virtio, ssd130x.
- Add support for simple panels Mitsubishi AA084XE01,
JDI LPM102A188A,
- Documentation updates to accel/ivpu.
- Some nouveau scheduling/fence fixes.
- Power management related fixes and other fixes to ivpu.
- Assorted bridge/it66121 fixes.
- Make platform drivers return void in remove() callback.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3da6554b-3b47-fe7d-c4ea-21f4f819dbb6@linux.intel.com
Pull drm updates from Dave Airlie:
"The drm core grew a new generic gpu virtual address manager, and new
execution locking helpers. These are used by nouveau now to provide
uAPI support for the userspace Vulkan driver. AMD had a bunch of new
IP core support, loads of refactoring around fbdev, but mostly just
the usual amount of stuff across the board.
core:
- fix gfp flags in drmm_kmalloc
gpuva:
- add new generic GPU VA manager (for nouveau initially)
syncobj:
- add new DRM_IOCTL_SYNCOBJ_EVENTFD ioctl
dma-buf:
- acquire resv lock for mmap() in exporters
- support dma-buf self import automatically
- docs fixes
backlight:
- fix fbdev interactions
atomic:
- improve logging
prime:
- remove struct gem_prim_mmap plus driver updates
gem:
- drm_exec: add locking over multiple GEM objects
- fix lockdep checking
fbdev:
- make fbdev userspace interfaces optional
- use linux device instead of fbdev device
- use deferred i/o helper macros in various drivers
- Make FB core selectable without drivers
- Remove obsolete flags FBINFO_DEFAULT and FBINFO_FLAG_DEFAULT
- Add helper macros and Kconfig tokens for DMA-allocated framebuffer
ttm:
- support init_on_free
- swapout fixes
panel:
- panel-edp: Support AUO B116XAB01.4
- Support Visionox R66451 plus DT bindings
- ld9040:
- Backlight support
- magic improved
- Kconfig fix
- Convert to of_device_get_match_data()
- Fix Kconfig dependencies
- simple:
- Set bpc value to fix warning
- Set connector type for AUO T215HVN01
- Support Innolux G156HCE-L01 plus DT bindings
- ili9881: Support TDO TL050HDV35 LCD panel plus DT bindings
- startek: Support KD070FHFID015 MIPI-DSI panel plus DT bindings
- sitronix-st7789v:
- Support Inanbo T28CP45TN89 plus DT bindings
- Support EDT ET028013DMA plus DT bindings
- Various cleanups
- edp: Add timings for N140HCA-EAC
- Allow panels and touchscreens to power sequence together
- Fix Innolux G156HCE-L01 LVDS clock
bridge:
- debugfs for chains support
- dw-hdmi:
- Improve support for YUV420 bus format
- CEC suspend/resume
- update EDID on HDMI detect
- dw-mipi-dsi: Fix enable/disable of DSI controller
- lt9611uxc: Use MODULE_FIRMWARE()
- ps8640: Remove broken EDID code
- samsung-dsim: Fix command transfer
- tc358764:
- Handle HS/VS polarity
- Use BIT() macro
- Various cleanups
- adv7511: Fix low refresh rate
- anx7625:
- Switch to macros instead of hardcoded values
- locking fixes
- tc358767: fix hardware delays
- sitronix-st7789v:
- Support panel orientation
- Support rotation property
- Add support for Jasonic JT240MHQS-HWT-EK-E3 plus DT bindings
amdgpu:
- SDMA 6.1.0 support
- HDP 6.1 support
- SMUIO 14.0 support
- PSP 14.0 support
- IH 6.1 support
- Lots of checkpatch cleanups
- GFX 9.4.3 updates
- Add USB PD and IFWI flashing documentation
- GPUVM updates
- RAS fixes
- DRR fixes
- FAMS fixes
- Virtual display fixes
- Soft IH fixes
- SMU13 fixes
- Rework PSP firmware loading for other IPs
- Kernel doc fixes
- DCN 3.0.1 fixes
- LTTPR fixes
- DP MST fixes
- DCN 3.1.6 fixes
- SMU 13.x fixes
- PSP 13.x fixes
- SubVP fixes
- GC 9.4.3 fixes
- Display bandwidth calculation fixes
- VCN4 secure submission fixes
- Allow building DC on RISC-V
- Add visible FB info to bo_print_info
- HBR3 fixes
- GFX9 MCBP fix
- GMC10 vmhub index fix
- GMC11 vmhub index fix
- Create a new doorbell manager
- SR-IOV fixes
- initial freesync panel replay support
- revert zpos properly until igt regression is fixeed
- use TTM to manage doorbell BAR
- Expose both current and average power via hwmon if supported
amdkfd:
- Cleanup CRIU dma-buf handling
- Use KIQ to unmap HIQ
- GFX 9.4.3 debugger updates
- GFX 9.4.2 debugger fixes
- Enable cooperative groups fof gfx11
- SVM fixes
- Convert older APUs to use dGPU path like newer APUs
- Drop IOMMUv2 path as it is no longer used
- TBA fix for aldebaran
i915:
- ICL+ DSI modeset sequence
- HDCP improvements
- MTL display fixes and cleanups
- HSW/BDW PSR1 restored
- Init DDI ports in VBT order
- General display refactors
- Start using plane scale factor for relative data rate
- Use shmem for dpt objects
- Expose RPS thresholds in sysfs
- Apply GuC SLPC min frequency softlimit correctly
- Extend Wa_14015795083 to TGL, RKL, DG1 and ADL
- Fix a VMA UAF for multi-gt platform
- Do not use stolen on MTL due to HW bug
- Check HuC and GuC version compatibility on MTL
- avoid infinite GPU waits due to premature release of request memory
- Fixes and updates for GSC memory allocation
- Display SDVO fixes
- Take stolen handling out of FBC code
- Make i915_coherent_map_type GT-centric
- Simplify shmem_create_from_object map_type
msm:
- SM6125 MDSS support
- DPU: SM6125 DPU support
- DSI: runtime PM support, burst mode support
- DSI PHY: SM6125 support in 14nm DSI PHY driver
- GPU: prepare for a7xx
- fix a690 firmware
- disable relocs on a6xx and newer
radeon:
- Lots of checkpatch cleanups
ast:
- improve device-model detection
- Represent BMV as virtual connector
- Report DP connection status
nouveau:
- add new exec/bind interface to support Vulkan
- document some getparam ioctls
- improve VRAM detection
- various fixes/cleanups
- workraound DPCD issues
ivpu:
- MMU updates
- debugfs support
- Support vpu4
virtio:
- add sync object support
atmel-hlcdc:
- Support inverted pixclock polarity
etnaviv:
- runtime PM cleanups
- hang handling fixes
exynos:
- use fbdev DMA helpers
- fix possible NULL ptr dereference
komeda:
- always attach encoder
omapdrm:
- use fbdev DMA helpers
ingenic:
- kconfig regmap fixes
loongson:
- support display controller
mediatek:
- Small mtk-dpi cleanups
- DisplayPort: support eDP and aux-bus
- Fix coverity issues
- Fix potential memory leak if vmap() fail
mgag200:
- minor fixes
mxsfb:
- support disabling overlay planes
panfrost:
- fix sync in IRQ handling
ssd130x:
- Support per-controller default resolution plus DT bindings
- Reduce memory-allocation overhead
- Improve intermediate buffer size computation
- Fix allocation of temporary buffers
- Fix pitch computation
- Fix shadow plane allocation
tegra:
- use fbdev DMA helpers
- Convert to devm_platform_ioremap_resource()
- support bridge/connector
- enable PM
tidss:
- Support TI AM625 plus DT bindings
- Implement new connector model plus driver updates
vkms:
- improve write back support
- docs fixes
- support gamma LUT
zynqmp-dpsub:
- misc fixes"
* tag 'drm-next-2023-08-30' of git://anongit.freedesktop.org/drm/drm: (1327 commits)
drm/gpuva_mgr: remove unused prev pointer in __drm_gpuva_sm_map()
drm/tests/drm_kunit_helpers: Place correct function name in the comment header
drm/nouveau: uapi: don't pass NO_PREFETCH flag implicitly
drm/nouveau: uvmm: fix unset region pointer on remap
drm/nouveau: sched: avoid job races between entities
drm/i915: Fix HPD polling, reenabling the output poll work as needed
drm: Add an HPD poll helper to reschedule the poll work
drm/i915: Fix TLB-Invalidation seqno store
drm/ttm/tests: Fix type conversion in ttm_pool_test
drm/msm/a6xx: Bail out early if setting GPU OOB fails
drm/msm/a6xx: Move LLC accessors to the common header
drm/msm/a6xx: Introduce a6xx_llc_read
drm/ttm/tests: Require MMU when testing
drm/panel: simple: Fix Innolux G156HCE-L01 LVDS clock
Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0""
drm/amdgpu: Add memory vendor information
drm/amd: flush any delayed gfxoff on suspend entry
drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix
drm/amdgpu: Remove gfxoff check in GFX v9.4.3
drm/amd/pm: Update pci link speed for smu v13.0.6
...
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714174545.4056287-1-robh@kernel.org
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-37-u.kleine-koenig@pengutronix.de
Pull drm updates from Dave Airlie:
"There is a new Qualcomm accel driver for their QAIC, dma-fence got a
deadline feature added, lots of refactoring around fbdev emulation,
and the usual pre-release hw enablements from AMD and Intel and fixes
everywhere.
New drivers:
- add QAIC acceleration driver
dma-buf:
- constify kobj_type structs
- Reject prime DMA-Buf attachment if get_sg_table is missing.
fbdev:
- cmdline parser fixes
- implement fbdev emulation for GEM DMA drivers
- always use shadow buffer in fbdev emulation helpers
dma-fence:
- add deadline hint to fences
- signal private stub fence
core:
- improve DisplayID 2.0 and EDID parsing
- add gem eviction function + callback
- prep to convert shmem helper to GEM resv lock
- move suballocator from radeon/amdgpu to core for Xe
- HPD polling fixes
- Documentation improvements
- Add atomic enable_plane callback
- use tgid instead of pid for client tracking
- DP: Add SDP Error Detection Configuration Register
- Add prime import/export to vram-helper
- use pci aperture helpers in more drivers
panel:
- Radxa 8/10HD support
- Samsung AMD495QA01 support
- Elida KD50T048A
- Sony TD4353
- Novatek NT36523
- STARRY 2081101QFH032011-53G
- B133UAN01.0
- AUO NE135FBM-N41
i915:
- More MTL enabling
- fix s/r problems with MEI/PXP
- Implement fb_dirty for PSR,FBC,DRRS fixes
- Fix eDP+DSI dual panel systems
- Fix issue #6333: "list_add corruption" and full system lockup from
performance monitoring
- Don't use stolen memory or BAR for ring buffers on LLC platforms
- Make sure DSM size has correct 1MiB granularity on Gen12+
- Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+
- Add engine TLB invalidation for Meteorlake
- Fix GSC races on driver load/unload on Meteorlake+
- Make kobj_type structures constant
- Move fd_install after last use of fence
- wm/vblank refactoring
- display code refactoring
- Create GSC submission targeting HDCP and PXP usages on MTL+
- Enable HDCP2.x via GSC CS
- Fix context runtime accounting on sysfs fdinfo for heavy workloads
- Use i915 instead of dev_priv insied the file_priv structure
- Replace fake flex-array with flexible-array member
amdgpu:
- Make kobj structures const
- Generalize dmabuf import to work with KFD
- Add capped/uncapped workload handling for supported APUs
- Expose additional memory stats via fdinfo
- Register vga_switcheroo for apple-gmux
- Initial NBIO7.9, GC 9.4.3, GFXHUB 1.2, MMHUB 1.8 support
- Initial DC FAM infrastructure
- Link DC backlight to connector device rather than PCI device
- Add sysfs nodes for secondary VCN clocks
amdkfd:
- Make kobj structures const
- Support for exporting buffers via dmabuf
- Multi-VMA page migration fixes
- initial GC 9.4.3 support
radeon:
- iMac fix
- convert to client based fbdev emulation
habanalabs:
- Add opcodes to the CS ioctl to allow user to stall/resume specific
engines inside Gaudi2.
- INFO ioctl the amount of device memory that the driver and f/w
reserve for themselves.
- INFO ioctl a bit-mask of the available rotator engines
- INFO ioctl the register's address of the f/w that should be used to
trigger interrupts
- INFO ioctl two new opcodes to fetch information on h/w and f/w
events
- Enable graceful reset mechanism for compute-reset.
- Align to the latest firmware specs.
- Enforce the release order of the compute device and dma-buf.
msm:
- UBWC decoder programming rework
- SM8550, SM8450 bindings update
- uapi C++ fix
- a3xx and a4xx devfreq support
- GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
- dma-fence deadline hint support and wait-boost
- a640/650 speed bin support
cirrus:
- convert to regular atomic helpers
- add damage clipping
mediatek:
- 10-bit overlay support
- mt8195 support
- Only trigger DRM HPD events if bridge is attached
- Change the aux retries times when receiving AUX_DEFER
rockchip:
- add 4K support
vc4:
- use drm_gem_objects
virtio:
- allow KMS support to be disabled
- add damage clipping
vmwgfx:
- buffer object lifetime fixes
exynos:
- move MIPI DSI driver to drm bridge for iMX sharing
- use kernel fbdev emulation
panfrost:
- add support for mali MT81xx devices
- add speed binning support
lima:
- add usage stats
tegra:
- fbdev client conversion
vkms:
- Add primary plane positioning support"
* tag 'drm-next-2023-04-24' of git://anongit.freedesktop.org/drm/drm: (1495 commits)
drm/i915/dp_mst: Fix active port PLL selection for secondary MST streams
drm/exynos: Implement fbdev emulation as in-kernel client
drm/exynos: Initialize fbdev DRM client
drm/exynos: Remove fb_helper from struct exynos_drm_private
drm/exynos: Remove struct exynos_drm_fbdev
drm/exynos: Remove exynos_gem from struct exynos_drm_fbdev
drm/i915: Fix memory leaks in i915 selftests
drm/i915: Make intel_get_crtc_new_encoder() less oopsy
drm/i915/gt: Avoid out-of-bounds access when loading HuC
drm/amdgpu: add some basic elements for multiple XCD case
drm/amdgpu: move vmhub out of amdgpu_ring_funcs (v4)
Revert "drm/amdgpu: enable ras for mp0 v13_0_10 on SRIOV"
drm/amdgpu: add common ip block for GC 9.4.3
drm/amd/display: Add logging when DP link training Clock recovery is Successful
drm/amdgpu: add common early init support for GC 9.4.3
drm/amdgpu: switch to v9_4_3 gfx_funcs callbacks for GC 9.4.3
drm/amd/display: Add logging when setting DP sink power state fails
drm/amdkfd: Add gfx_target_version for GC 9.4.3
drm/amdkfd: Enable HW_UPDATE_RPTR on GC 9.4.3
drm/amdgpu: reserve the old gc_11_0_*_mes.bin
...
Some SoCs implementing ARM Mali GPUs are subject to speed binning:
this means that some versions of the same SoC model may need to be
limited to a slower frequency compared to the other:
this is being addressed by reading nvmem (usually, an eFuse array)
containing a number that identifies the speed binning of the chip,
which is usually related to silicon quality.
To address such situation, add basic support for reading the
speed-bin through nvmem, as to make it possible to specify the
supported hardware in the OPP table for GPUs.
This commit also keeps compatibility with any platform that does
not specify (and does not even support) speed-binning.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323090822.61766-3-angelogioacchino.delregno@collabora.com
I just landed the fence deadline PR from Rob that a bunch of drivers
want/need to apply driver-specific patches. Backmerge -rc4 so that
they don't have to be stuck on -rc2 for no reason at all.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The "mediatek,mt8183-mali" compatible uses platform data that calls for
getting (and managing) two regulators ("mali" and "sram") but devfreq
does not support this usecase, resulting in DVFS not working.
Since a lot of MediaTek SoCs need to set the voltages for the GPU SRAM
regulator in a specific relation to the GPU VCORE regulator, a MediaTek
SoC specific driver was introduced to automatically satisfy, through
coupling, these constraints: this means that there is at all no need to
manage both regulators in panfrost but to otherwise just manage the main
"mali" (-> gpu vcore) regulator instead.
Keeping in mind that we cannot break the ABI, the most sensible route
(avoiding hacks and uselessly overcomplicated code) to get a MT8183
node with one power supply was to add a new "mediatek,mt8183b-mali"
compatible, which effectively deprecates the former.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316102041.210269-12-angelogioacchino.delregno@collabora.com
