Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Current release - regressions:
- veth: fix packet segmentation in veth_convert_skb_to_xdp_buff
Current release - new code bugs:
- tcp: assorted fixes to the new Auth Option support
Older releases - regressions:
- tcp: fix mid stream window clamp
- tls: fix incorrect splice handling
- ipv4: ip_gre: handle skb_pull() failure in ipgre_xmit()
- dsa: mv88e6xxx: restore USXGMII support for 6393X
- arcnet: restore support for multiple Sohard Arcnet cards
Older releases - always broken:
- tcp: do not accept ACK of bytes we never sent
- require admin privileges to receive packet traces via netlink
- packet: move reference count in packet_sock to atomic_long_t
- bpf:
- fix incorrect branch offset comparison with cpu=v4
- fix prog_array_map_poke_run map poke update
- netfilter:
- three fixes for crashes on bad admin commands
- xt_owner: fix race accessing sk->sk_socket, TOCTOU null-deref
- nf_tables: fix 'exist' matching on bigendian arches
- leds: netdev: fix RTNL handling to prevent potential deadlock
- eth: tg3: prevent races in error/reset handling
- eth: r8169: fix rtl8125b PAUSE storm when suspended
- eth: r8152: improve reset and surprise removal handling
- eth: hns: fix race between changing features and sending
- eth: nfp: fix sleep in atomic for bonding offload"
* tag 'net-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
vsock/virtio: fix "comparison of distinct pointer types lacks a cast" warning
net/smc: fix missing byte order conversion in CLC handshake
net: dsa: microchip: provide a list of valid protocols for xmit handler
drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group
psample: Require 'CAP_NET_ADMIN' when joining "packets" group
bpf: sockmap, updating the sg structure should also update curr
net: tls, update curr on splice as well
nfp: flower: fix for take a mutex lock in soft irq context and rcu lock
net: dsa: mv88e6xxx: Restore USXGMII support for 6393X
tcp: do not accept ACK of bytes we never sent
selftests/bpf: Add test for early update in prog_array_map_poke_run
bpf: Fix prog_array_map_poke_run map poke update
netfilter: xt_owner: Fix for unsafe access of sk->sk_socket
netfilter: nf_tables: validate family when identifying table via handle
netfilter: nf_tables: bail out on mismatching dynset and set expressions
netfilter: nf_tables: fix 'exist' matching on bigendian arches
netfilter: nft_set_pipapo: skip inactive elements during set walk
netfilter: bpf: fix bad registration on nf_defrag
leds: trigger: netdev: fix RTNL handling to prevent potential deadlock
octeontx2-af: Update Tx link register range
...
This patch promotes the arithmetic around checking stack bounds to be
done in the 64-bit domain, instead of the current 32bit. The arithmetic
implies adding together a 64-bit register with a int offset. The
register was checked to be below 1<<29 when it was variable, but not
when it was fixed. The offset either comes from an instruction (in which
case it is 16 bit), from another register (in which case the caller
checked it to be below 1<<29 [1]), or from the size of an argument to a
kfunc (in which case it can be a u32 [2]). Between the register being
inconsistently checked to be below 1<<29, and the offset being up to an
u32, it appears that we were open to overflowing the `int`s which were
currently used for arithmetic.
[1] 815fb87b75/kernel/bpf/verifier.c (L7494-L7498)
[2] 815fb87b75/kernel/bpf/verifier.c (L11904)
Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231207041150.229139-4-andreimatei1@gmail.com
This patch fixes a bug around the verification of possibly-zero-sized
stack accesses. When the access was done through a var-offset stack
pointer, check_stack_access_within_bounds was incorrectly computing the
maximum-offset of a zero-sized read to be the same as the register's min
offset. Instead, we have to take in account the register's maximum
possible value. The patch also simplifies how the max offset is checked;
the check is now simpler than for min offset.
The bug was allowing accesses to erroneously pass the
check_stack_access_within_bounds() checks, only to later crash in
check_stack_range_initialized() when all the possibly-affected stack
slots are iterated (this time with a correct max offset).
check_stack_range_initialized() is relying on
check_stack_access_within_bounds() for its accesses to the
stack-tracking vector to be within bounds; in the case of zero-sized
accesses, we were essentially only verifying that the lowest possible
slot was within bounds. We would crash when the max-offset of the stack
pointer was >= 0 (which shouldn't pass verification, and hopefully is
not something anyone's code attempts to do in practice).
Thanks Hao for reporting!
Fixes: 01f810ace9 ("bpf: Allow variable-offset stack access")
Reported-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231207041150.229139-2-andreimatei1@gmail.com
Closes: https://lore.kernel.org/bpf/CACkBjsZGEUaRCHsmaX=h-efVogsRfK1FPxmkgb0Os_frnHiNdw@mail.gmail.com/
Pull cgroup fix from Tejun Heo:
"Just one fix.
Commit f5d39b0208 ("freezer,sched: Rewrite core freezer logic")
changed how freezing state is recorded which made cgroup_freezing()
disagree with the actual state of the task while thawing triggering a
warning. Fix it by updating cgroup_freezing()"
* tag 'cgroup-for-6.7-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup_freezer: cgroup_freezing: Check if not frozen
Pull workqueue fix from Tejun Heo:
"Just one patch to fix a bug which can crash the kernel if the
housekeeping and wq_unbound_cpu cpumask configuration combination
leaves the latter empty"
* tag 'wq-for-6.7-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Make sure that wq_unbound_cpumask is never empty
Instead of blindly allocating PAGE_SIZE for each trampoline, check the size
of the trampoline with arch_bpf_trampoline_size(). This size is saved in
bpf_tramp_image->size, and used for modmem charge/uncharge. The fallback
arch_alloc_bpf_trampoline() still allocates a whole page because we need to
use set_memory_* to protect the memory.
struct_ops trampoline still uses a whole page for multiple trampolines.
With this size check at caller (regular trampoline and struct_ops
trampoline), remove arch_bpf_trampoline_size() from
arch_prepare_bpf_trampoline() in archs.
Also, update bpf_image_ksym_add() to handle symbol of different sizes.
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> # on s390x
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # on riscv
Link: https://lore.kernel.org/r/20231206224054.492250-7-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This helper will be used to calculate the size of the trampoline before
allocating the memory.
arch_prepare_bpf_trampoline() for arm64 and riscv64 can use
arch_bpf_trampoline_size() to check the trampoline fits in the image.
OTOH, arch_prepare_bpf_trampoline() for s390 has to call the JIT process
twice, so it cannot use arch_bpf_trampoline_size().
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> # on s390x
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # on riscv
Link: https://lore.kernel.org/r/20231206224054.492250-6-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As BPF trampoline of different archs moves from bpf_jit_[alloc|free]_exec()
to bpf_prog_pack_[alloc|free](), we need to use different _alloc, _free for
different archs during the transition. Add the following helpers for this
transition:
void *arch_alloc_bpf_trampoline(unsigned int size);
void arch_free_bpf_trampoline(void *image, unsigned int size);
void arch_protect_bpf_trampoline(void *image, unsigned int size);
void arch_unprotect_bpf_trampoline(void *image, unsigned int size);
The fallback version of these helpers require size <= PAGE_SIZE, but they
are only called with size == PAGE_SIZE. They will be called with size <
PAGE_SIZE when arch_bpf_trampoline_size() helper is introduced later.
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> # on s390x
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20231206224054.492250-4-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We are using "im" for "struct bpf_tramp_image" and "tr" for "struct
bpf_trampoline" in most of the code base. The only exception is the
prototype and fallback version of arch_prepare_bpf_trampoline(). Update
them to match the rest of the code base.
We mix "orig_call" and "func_addr" for the argument in different versions
of arch_prepare_bpf_trampoline(). s/orig_call/func_addr/g so they match.
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> # on s390x
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20231206224054.492250-3-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ignat Korchagin complained that a potential config regression was
introduced by commit 89cde45591 ("kexec: consolidate kexec and crash
options into kernel/Kconfig.kexec"). Before the commit, CONFIG_CRASH_DUMP
has no dependency on CONFIG_KEXEC. After the commit, CRASH_DUMP selects
KEXEC. That enforces system to have CONFIG_KEXEC=y as long as
CONFIG_CRASH_DUMP=Y which people may not want.
In Ignat's case, he sets CONFIG_CRASH_DUMP=y, CONFIG_KEXEC_FILE=y and
CONFIG_KEXEC=n because kexec_load interface could have security issue if
kernel/initrd has no chance to be signed and verified.
CRASH_DUMP has select of KEXEC because Eric, author of above commit, met a
LKP report of build failure when posting patch of earlier version. Please
see below link to get detail of the LKP report:
https://lore.kernel.org/all/3e8eecd1-a277-2cfb-690e-5de2eb7b988e@oracle.com/T/#u
In fact, that LKP report is triggered because arm's <asm/kexec.h> is
wrapped in CONFIG_KEXEC ifdeffery scope. That is wrong. CONFIG_KEXEC
controls the enabling/disabling of kexec_load interface, but not kexec
feature. Removing the wrongly added CONFIG_KEXEC ifdeffery scope in
<asm/kexec.h> of arm allows us to drop the select KEXEC for CRASH_DUMP.
Meanwhile, change arch/arm/kernel/Makefile to let machine_kexec.o
relocate_kernel.o depend on KEXEC_CORE.
Link: https://lkml.kernel.org/r/20231128054457.659452-1-bhe@redhat.com
Fixes: 89cde45591 ("kexec: consolidate kexec and crash options into kernel/Kconfig.kexec")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Ignat Korchagin <ignat@cloudflare.com>
Tested-by: Ignat Korchagin <ignat@cloudflare.com> [compile-time only]
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com>
Tested-by: Eric DeVolder <eric_devolder@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lee pointed out issue found by syscaller [0] hitting BUG in prog array
map poke update in prog_array_map_poke_run function due to error value
returned from bpf_arch_text_poke function.
There's race window where bpf_arch_text_poke can fail due to missing
bpf program kallsym symbols, which is accounted for with check for
-EINVAL in that BUG_ON call.
The problem is that in such case we won't update the tail call jump
and cause imbalance for the next tail call update check which will
fail with -EBUSY in bpf_arch_text_poke.
I'm hitting following race during the program load:
CPU 0 CPU 1
bpf_prog_load
bpf_check
do_misc_fixups
prog_array_map_poke_track
map_update_elem
bpf_fd_array_map_update_elem
prog_array_map_poke_run
bpf_arch_text_poke returns -EINVAL
bpf_prog_kallsyms_add
After bpf_arch_text_poke (CPU 1) fails to update the tail call jump, the next
poke update fails on expected jump instruction check in bpf_arch_text_poke
with -EBUSY and triggers the BUG_ON in prog_array_map_poke_run.
Similar race exists on the program unload.
Fixing this by moving the update to bpf_arch_poke_desc_update function which
makes sure we call __bpf_arch_text_poke that skips the bpf address check.
Each architecture has slightly different approach wrt looking up bpf address
in bpf_arch_text_poke, so instead of splitting the function or adding new
'checkip' argument in previous version, it seems best to move the whole
map_poke_run update as arch specific code.
[0] https://syzkaller.appspot.com/bug?extid=97a4fe20470e9bc30810
Fixes: ebf7d1f508 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT")
Reported-by: syzbot+97a4fe20470e9bc30810@syzkaller.appspotmail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Cc: Lee Jones <lee@kernel.org>
Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20231206083041.1306660-2-jolsa@kernel.org
Since 64 bit cmpxchg() is very expensive on 32bit architectures, the
timestamp used by the ring buffer does some interesting tricks to be able
to still have an atomic 64 bit number. It originally just used 60 bits and
broke it up into two 32 bit words where the extra 2 bits were used for
synchronization. But this was not enough for all use cases, and all 64
bits were required.
The 32bit version of the ring buffer timestamp was then broken up into 3
32bit words using the same counter trick. But one update was not done. The
check to see if the read operation was done without interruption only
checked the first two words and not last one (like it had before this
update). Fix it by making sure all three updates happen without
interruption by comparing the initial counter with the last updated
counter.
Link: https://lore.kernel.org/linux-trace-kernel/20231206100050.3100b7bb@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: f03f2abce4 ("ring-buffer: Have 32 bit time stamps use all 64 bits")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There's a race where if an event is discarded from the ring buffer and an
interrupt were to happen at that time and insert an event, the time stamp
is still used from the discarded event as an offset. This can screw up the
timings.
If the event is going to be discarded, set the "before_stamp" to zero.
When a new event comes in, it compares the "before_stamp" with the
"write_stamp" and if they are not equal, it will insert an absolute
timestamp. This will prevent the timings from getting out of sync due to
the discarded event.
Link: https://lore.kernel.org/linux-trace-kernel/20231206100244.5130f9b3@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 6f6be606e7 ("ring-buffer: Force before_stamp and write_stamp to be different on discard")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, the cpu_is_isolated() function checks only the statically
isolated CPUs specified via the "isolcpus" and "nohz_full" kernel
command line options. This function is used by vmstat and memcg to
reduce interference with isolated CPUs by not doing stat flushing
or scheduling works on those CPUs.
Workloads running on isolated CPUs within isolated cpuset
partitions should receive the same treatment to reduce unnecessary
interference. This patch introduces a new cpuset_cpu_is_isolated()
function to be called by cpu_is_isolated() so that the set of dynamically
created cpuset isolated CPUs will be included in the check.
Assuming that testing a bit in a cpumask is atomic, no synchronization
primitive is currently used to synchronize access to the cpuset's
isolated_cpus mask.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Wire up bpf_token_create and bpf_token_free LSM hooks, which allow to
allocate LSM security blob (we add `void *security` field to struct
bpf_token for that), but also control who can instantiate BPF token.
This follows existing pattern for BPF map and BPF prog.
Also add security_bpf_token_allow_cmd() and security_bpf_token_capable()
LSM hooks that allow LSM implementation to control and negate (if
necessary) BPF token's delegation of a specific bpf_cmd and capability,
respectively.
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-12-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Similarly to bpf_prog_alloc LSM hook, rename and extend bpf_map_alloc
hook into bpf_map_create, taking not just struct bpf_map, but also
bpf_attr and bpf_token, to give a fuller context to LSMs.
Unlike bpf_prog_alloc, there is no need to move the hook around, as it
currently is firing right before allocating BPF map ID and FD, which
seems to be a sweet spot.
But like bpf_prog_alloc/bpf_prog_free combo, make sure that bpf_map_free
LSM hook is called even if bpf_map_create hook returned error, as if few
LSMs are combined together it could be that one LSM successfully
allocated security blob for its needs, while subsequent LSM rejected BPF
map creation. The former LSM would still need to free up LSM blob, so we
need to ensure security_bpf_map_free() is called regardless of the
outcome.
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-11-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Based on upstream discussion ([0]), rework existing
bpf_prog_alloc_security LSM hook. Rename it to bpf_prog_load and instead
of passing bpf_prog_aux, pass proper bpf_prog pointer for a full BPF
program struct. Also, we pass bpf_attr union with all the user-provided
arguments for BPF_PROG_LOAD command. This will give LSMs as much
information as we can basically provide.
The hook is also BPF token-aware now, and optional bpf_token struct is
passed as a third argument. bpf_prog_load LSM hook is called after
a bunch of sanity checks were performed, bpf_prog and bpf_prog_aux were
allocated and filled out, but right before performing full-fledged BPF
verification step.
bpf_prog_free LSM hook is now accepting struct bpf_prog argument, for
consistency. SELinux code is adjusted to all new names, types, and
signatures.
Note, given that bpf_prog_load (previously bpf_prog_alloc) hook can be
used by some LSMs to allocate extra security blob, but also by other
LSMs to reject BPF program loading, we need to make sure that
bpf_prog_free LSM hook is called after bpf_prog_load/bpf_prog_alloc one
*even* if the hook itself returned error. If we don't do that, we run
the risk of leaking memory. This seems to be possible today when
combining SELinux and BPF LSM, as one example, depending on their
relative ordering.
Also, for BPF LSM setup, add bpf_prog_load and bpf_prog_free to
sleepable LSM hooks list, as they are both executed in sleepable
context. Also drop bpf_prog_load hook from untrusted, as there is no
issue with refcount or anything else anymore, that originally forced us
to add it to untrusted list in c0c852dd18 ("bpf: Do not mark certain LSM
hook arguments as trusted"). We now trigger this hook much later and it
should not be an issue anymore.
[0] https://lore.kernel.org/bpf/9fe88aef7deabbe87d3fc38c4aea3c69.paul@paul-moore.com/
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-10-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of performing unconditional system-wide bpf_capable() and
perfmon_capable() calls inside bpf_base_func_proto() function (and other
similar ones) to determine eligibility of a given BPF helper for a given
program, use previously recorded BPF token during BPF_PROG_LOAD command
handling to inform the decision.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-8-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add basic support of BPF token to BPF_PROG_LOAD. Wire through a set of
allowed BPF program types and attach types, derived from BPF FS at BPF
token creation time. Then make sure we perform bpf_token_capable()
checks everywhere where it's relevant.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Accept BPF token FD in BPF_BTF_LOAD command to allow BTF data loading
through delegated BPF token. BTF loading is a pretty straightforward
operation, so as long as BPF token is created with allow_cmds granting
BPF_BTF_LOAD command, kernel proceeds to parsing BTF data and creating
BTF object.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow providing token_fd for BPF_MAP_CREATE command to allow controlled
BPF map creation from unprivileged process through delegated BPF token.
Wire through a set of allowed BPF map types to BPF token, derived from
BPF FS at BPF token creation time. This, in combination with allowed_cmds
allows to create a narrowly-focused BPF token (controlled by privileged
agent) with a restrictive set of BPF maps that application can attempt
to create.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add new kind of BPF kernel object, BPF token. BPF token is meant to
allow delegating privileged BPF functionality, like loading a BPF
program or creating a BPF map, from privileged process to a *trusted*
unprivileged process, all while having a good amount of control over which
privileged operations could be performed using provided BPF token.
This is achieved through mounting BPF FS instance with extra delegation
mount options, which determine what operations are delegatable, and also
constraining it to the owning user namespace (as mentioned in the
previous patch).
BPF token itself is just a derivative from BPF FS and can be created
through a new bpf() syscall command, BPF_TOKEN_CREATE, which accepts BPF
FS FD, which can be attained through open() API by opening BPF FS mount
point. Currently, BPF token "inherits" delegated command, map types,
prog type, and attach type bit sets from BPF FS as is. In the future,
having an BPF token as a separate object with its own FD, we can allow
to further restrict BPF token's allowable set of things either at the
creation time or after the fact, allowing the process to guard itself
further from unintentionally trying to load undesired kind of BPF
programs. But for now we keep things simple and just copy bit sets as is.
When BPF token is created from BPF FS mount, we take reference to the
BPF super block's owning user namespace, and then use that namespace for
checking all the {CAP_BPF, CAP_PERFMON, CAP_NET_ADMIN, CAP_SYS_ADMIN}
capabilities that are normally only checked against init userns (using
capable()), but now we check them using ns_capable() instead (if BPF
token is provided). See bpf_token_capable() for details.
Such setup means that BPF token in itself is not sufficient to grant BPF
functionality. User namespaced process has to *also* have necessary
combination of capabilities inside that user namespace. So while
previously CAP_BPF was useless when granted within user namespace, now
it gains a meaning and allows container managers and sys admins to have
a flexible control over which processes can and need to use BPF
functionality within the user namespace (i.e., container in practice).
And BPF FS delegation mount options and derived BPF tokens serve as
a per-container "flag" to grant overall ability to use bpf() (plus further
restrict on which parts of bpf() syscalls are treated as namespaced).
Note also, BPF_TOKEN_CREATE command itself requires ns_capable(CAP_BPF)
within the BPF FS owning user namespace, rounding up the ns_capable()
story of BPF token.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add few new mount options to BPF FS that allow to specify that a given
BPF FS instance allows creation of BPF token (added in the next patch),
and what sort of operations are allowed under BPF token. As such, we get
4 new mount options, each is a bit mask
- `delegate_cmds` allow to specify which bpf() syscall commands are
allowed with BPF token derived from this BPF FS instance;
- if BPF_MAP_CREATE command is allowed, `delegate_maps` specifies
a set of allowable BPF map types that could be created with BPF token;
- if BPF_PROG_LOAD command is allowed, `delegate_progs` specifies
a set of allowable BPF program types that could be loaded with BPF token;
- if BPF_PROG_LOAD command is allowed, `delegate_attachs` specifies
a set of allowable BPF program attach types that could be loaded with
BPF token; delegate_progs and delegate_attachs are meant to be used
together, as full BPF program type is, in general, determined
through both program type and program attach type.
Currently, these mount options accept the following forms of values:
- a special value "any", that enables all possible values of a given
bit set;
- numeric value (decimal or hexadecimal, determined by kernel
automatically) that specifies a bit mask value directly;
- all the values for a given mount option are combined, if specified
multiple times. E.g., `mount -t bpf nodev /path/to/mount -o
delegate_maps=0x1 -o delegate_maps=0x2` will result in a combined 0x3
mask.
Ideally, more convenient (for humans) symbolic form derived from
corresponding UAPI enums would be accepted (e.g., `-o
delegate_progs=kprobe|tracepoint`) and I intend to implement this, but
it requires a bunch of UAPI header churn, so I postponed it until this
feature lands upstream or at least there is a definite consensus that
this feature is acceptable and is going to make it, just to minimize
amount of wasted effort and not increase amount of non-essential code to
be reviewed.
Attentive reader will notice that BPF FS is now marked as
FS_USERNS_MOUNT, which theoretically makes it mountable inside non-init
user namespace as long as the process has sufficient *namespaced*
capabilities within that user namespace. But in reality we still
restrict BPF FS to be mountable only by processes with CAP_SYS_ADMIN *in
init userns* (extra check in bpf_fill_super()). FS_USERNS_MOUNT is added
to allow creating BPF FS context object (i.e., fsopen("bpf")) from
inside unprivileged process inside non-init userns, to capture that
userns as the owning userns. It will still be required to pass this
context object back to privileged process to instantiate and mount it.
This manipulation is important, because capturing non-init userns as the
owning userns of BPF FS instance (super block) allows to use that userns
to constraint BPF token to that userns later on (see next patch). So
creating BPF FS with delegation inside unprivileged userns will restrict
derived BPF token objects to only "work" inside that intended userns,
making it scoped to a intended "container". Also, setting these
delegation options requires capable(CAP_SYS_ADMIN), so unprivileged
process cannot set this up without involvement of a privileged process.
There is a set of selftests at the end of the patch set that simulates
this sequence of steps and validates that everything works as intended.
But careful review is requested to make sure there are no missed gaps in
the implementation and testing.
This somewhat subtle set of aspects is the result of previous
discussions ([0]) about various user namespace implications and
interactions with BPF token functionality and is necessary to contain
BPF token inside intended user namespace.
[0] https://lore.kernel.org/bpf/20230704-hochverdient-lehne-eeb9eeef785e@brauner/
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Within BPF syscall handling code CAP_NET_ADMIN checks stand out a bit
compared to CAP_BPF and CAP_PERFMON checks. For the latter, CAP_BPF or
CAP_PERFMON are checked first, but if they are not set, CAP_SYS_ADMIN
takes over and grants whatever part of BPF syscall is required.
Similar kind of checks that involve CAP_NET_ADMIN are not so consistent.
One out of four uses does follow CAP_BPF/CAP_PERFMON model: during
BPF_PROG_LOAD, if the type of BPF program is "network-related" either
CAP_NET_ADMIN or CAP_SYS_ADMIN is required to proceed.
But in three other cases CAP_NET_ADMIN is required even if CAP_SYS_ADMIN
is set:
- when creating DEVMAP/XDKMAP/CPU_MAP maps;
- when attaching CGROUP_SKB programs;
- when handling BPF_PROG_QUERY command.
This patch is changing the latter three cases to follow BPF_PROG_LOAD
model, that is allowing to proceed under either CAP_NET_ADMIN or
CAP_SYS_ADMIN.
This also makes it cleaner in subsequent BPF token patches to switch
wholesomely to a generic bpf_token_capable(int cap) check, that always
falls back to CAP_SYS_ADMIN if requested capability is missing.
Cc: Jakub Kicinski <kuba@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Function trace_buffered_event_disable() is responsible for freeing pages
backing buffered events and this process can run concurrently with
trace_event_buffer_lock_reserve().
The following race is currently possible:
* Function trace_buffered_event_disable() is called on CPU 0. It
increments trace_buffered_event_cnt on each CPU and waits via
synchronize_rcu() for each user of trace_buffered_event to complete.
* After synchronize_rcu() is finished, function
trace_buffered_event_disable() has the exclusive access to
trace_buffered_event. All counters trace_buffered_event_cnt are at 1
and all pointers trace_buffered_event are still valid.
* At this point, on a different CPU 1, the execution reaches
trace_event_buffer_lock_reserve(). The function calls
preempt_disable_notrace() and only now enters an RCU read-side
critical section. The function proceeds and reads a still valid
pointer from trace_buffered_event[CPU1] into the local variable
"entry". However, it doesn't yet read trace_buffered_event_cnt[CPU1]
which happens later.
* Function trace_buffered_event_disable() continues. It frees
trace_buffered_event[CPU1] and decrements
trace_buffered_event_cnt[CPU1] back to 0.
* Function trace_event_buffer_lock_reserve() continues. It reads and
increments trace_buffered_event_cnt[CPU1] from 0 to 1. This makes it
believe that it can use the "entry" that it already obtained but the
pointer is now invalid and any access results in a use-after-free.
Fix the problem by making a second synchronize_rcu() call after all
trace_buffered_event values are set to NULL. This waits on all potential
users in trace_event_buffer_lock_reserve() that still read a previous
pointer from trace_buffered_event.
Link: https://lore.kernel.org/all/20231127151248.7232-2-petr.pavlu@suse.com/
Link: https://lkml.kernel.org/r/20231205161736.19663-4-petr.pavlu@suse.com
Cc: stable@vger.kernel.org
Fixes: 0fc1b09ff1 ("tracing: Use temp buffer when filtering events")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Function trace_buffered_event_disable() produces an unexpected warning
when the previous call to trace_buffered_event_enable() fails to
allocate pages for buffered events.
The situation can occur as follows:
* The counter trace_buffered_event_ref is at 0.
* The soft mode gets enabled for some event and
trace_buffered_event_enable() is called. The function increments
trace_buffered_event_ref to 1 and starts allocating event pages.
* The allocation fails for some page and trace_buffered_event_disable()
is called for cleanup.
* Function trace_buffered_event_disable() decrements
trace_buffered_event_ref back to 0, recognizes that it was the last
use of buffered events and frees all allocated pages.
* The control goes back to trace_buffered_event_enable() which returns.
The caller of trace_buffered_event_enable() has no information that
the function actually failed.
* Some time later, the soft mode is disabled for the same event.
Function trace_buffered_event_disable() is called. It warns on
"WARN_ON_ONCE(!trace_buffered_event_ref)" and returns.
Buffered events are just an optimization and can handle failures. Make
trace_buffered_event_enable() exit on the first failure and left any
cleanup later to when trace_buffered_event_disable() is called.
Link: https://lore.kernel.org/all/20231127151248.7232-2-petr.pavlu@suse.com/
Link: https://lkml.kernel.org/r/20231205161736.19663-3-petr.pavlu@suse.com
Fixes: 0fc1b09ff1 ("tracing: Use temp buffer when filtering events")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The following warning appears when using buffered events:
[ 203.556451] WARNING: CPU: 53 PID: 10220 at kernel/trace/ring_buffer.c:3912 ring_buffer_discard_commit+0x2eb/0x420
[...]
[ 203.670690] CPU: 53 PID: 10220 Comm: stress-ng-sysin Tainted: G E 6.7.0-rc2-default #4 56e6d0fcf5581e6e51eaaecbdaec2a2338c80f3a
[ 203.670704] Hardware name: Intel Corp. GROVEPORT/GROVEPORT, BIOS GVPRCRB1.86B.0016.D04.1705030402 05/03/2017
[ 203.670709] RIP: 0010:ring_buffer_discard_commit+0x2eb/0x420
[ 203.735721] Code: 4c 8b 4a 50 48 8b 42 48 49 39 c1 0f 84 b3 00 00 00 49 83 e8 01 75 b1 48 8b 42 10 f0 ff 40 08 0f 0b e9 fc fe ff ff f0 ff 47 08 <0f> 0b e9 77 fd ff ff 48 8b 42 10 f0 ff 40 08 0f 0b e9 f5 fe ff ff
[ 203.735734] RSP: 0018:ffffb4ae4f7b7d80 EFLAGS: 00010202
[ 203.735745] RAX: 0000000000000000 RBX: ffffb4ae4f7b7de0 RCX: ffff8ac10662c000
[ 203.735754] RDX: ffff8ac0c750be00 RSI: ffff8ac10662c000 RDI: ffff8ac0c004d400
[ 203.781832] RBP: ffff8ac0c039cea0 R08: 0000000000000000 R09: 0000000000000000
[ 203.781839] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[ 203.781842] R13: ffff8ac10662c000 R14: ffff8ac0c004d400 R15: ffff8ac10662c008
[ 203.781846] FS: 00007f4cd8a67740(0000) GS:ffff8ad798880000(0000) knlGS:0000000000000000
[ 203.781851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 203.781855] CR2: 0000559766a74028 CR3: 00000001804c4000 CR4: 00000000001506f0
[ 203.781862] Call Trace:
[ 203.781870] <TASK>
[ 203.851949] trace_event_buffer_commit+0x1ea/0x250
[ 203.851967] trace_event_raw_event_sys_enter+0x83/0xe0
[ 203.851983] syscall_trace_enter.isra.0+0x182/0x1a0
[ 203.851990] do_syscall_64+0x3a/0xe0
[ 203.852075] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 203.852090] RIP: 0033:0x7f4cd870fa77
[ 203.982920] Code: 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 90 b8 89 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e9 43 0e 00 f7 d8 64 89 01 48
[ 203.982932] RSP: 002b:00007fff99717dd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000089
[ 203.982942] RAX: ffffffffffffffda RBX: 0000558ea1d7b6f0 RCX: 00007f4cd870fa77
[ 203.982948] RDX: 0000000000000000 RSI: 00007fff99717de0 RDI: 0000558ea1d7b6f0
[ 203.982957] RBP: 00007fff99717de0 R08: 00007fff997180e0 R09: 00007fff997180e0
[ 203.982962] R10: 00007fff997180e0 R11: 0000000000000246 R12: 00007fff99717f40
[ 204.049239] R13: 00007fff99718590 R14: 0000558e9f2127a8 R15: 00007fff997180b0
[ 204.049256] </TASK>
For instance, it can be triggered by running these two commands in
parallel:
$ while true; do
echo hist:key=id.syscall:val=hitcount > \
/sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger;
done
$ stress-ng --sysinfo $(nproc)
The warning indicates that the current ring_buffer_per_cpu is not in the
committing state. It happens because the active ring_buffer_event
doesn't actually come from the ring_buffer_per_cpu but is allocated from
trace_buffered_event.
The bug is in function trace_buffered_event_disable() where the
following normally happens:
* The code invokes disable_trace_buffered_event() via
smp_call_function_many() and follows it by synchronize_rcu(). This
increments the per-CPU variable trace_buffered_event_cnt on each
target CPU and grants trace_buffered_event_disable() the exclusive
access to the per-CPU variable trace_buffered_event.
* Maintenance is performed on trace_buffered_event, all per-CPU event
buffers get freed.
* The code invokes enable_trace_buffered_event() via
smp_call_function_many(). This decrements trace_buffered_event_cnt and
releases the access to trace_buffered_event.
A problem is that smp_call_function_many() runs a given function on all
target CPUs except on the current one. The following can then occur:
* Task X executing trace_buffered_event_disable() runs on CPU 0.
* The control reaches synchronize_rcu() and the task gets rescheduled on
another CPU 1.
* The RCU synchronization finishes. At this point,
trace_buffered_event_disable() has the exclusive access to all
trace_buffered_event variables except trace_buffered_event[CPU0]
because trace_buffered_event_cnt[CPU0] is never incremented and if the
buffer is currently unused, remains set to 0.
* A different task Y is scheduled on CPU 0 and hits a trace event. The
code in trace_event_buffer_lock_reserve() sees that
trace_buffered_event_cnt[CPU0] is set to 0 and decides the use the
buffer provided by trace_buffered_event[CPU0].
* Task X continues its execution in trace_buffered_event_disable(). The
code incorrectly frees the event buffer pointed by
trace_buffered_event[CPU0] and resets the variable to NULL.
* Task Y writes event data to the now freed buffer and later detects the
created inconsistency.
The issue is observable since commit dea499781a ("tracing: Fix warning
in trace_buffered_event_disable()") which moved the call of
trace_buffered_event_disable() in __ftrace_event_enable_disable()
earlier, prior to invoking call->class->reg(.. TRACE_REG_UNREGISTER ..).
The underlying problem in trace_buffered_event_disable() is however
present since the original implementation in commit 0fc1b09ff1
("tracing: Use temp buffer when filtering events").
Fix the problem by replacing the two smp_call_function_many() calls with
on_each_cpu_mask() which invokes a given callback on all CPUs.
Link: https://lore.kernel.org/all/20231127151248.7232-2-petr.pavlu@suse.com/
Link: https://lkml.kernel.org/r/20231205161736.19663-2-petr.pavlu@suse.com
Cc: stable@vger.kernel.org
Fixes: 0fc1b09ff1 ("tracing: Use temp buffer when filtering events")
Fixes: dea499781a ("tracing: Fix warning in trace_buffered_event_disable()")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
It use to be that only the top level instance had a snapshot buffer (for
latency tracers like wakeup and irqsoff). When stopping a tracer in an
instance would not disable the snapshot buffer. This could have some
unintended consequences if the irqsoff tracer is enabled.
Consolidate the tracing_start/stop() with tracing_start/stop_tr() so that
all instances behave the same. The tracing_start/stop() functions will
just call their respective tracing_start/stop_tr() with the global_array
passed in.
Link: https://lkml.kernel.org/r/20231205220011.041220035@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 6d9b3fa5e7 ("tracing: Move tracing_max_latency into trace_array")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the ring buffer is being resized, it can cause side effects to the
running tracer. For instance, there's a race with irqsoff tracer that
swaps individual per cpu buffers between the main buffer and the snapshot
buffer. The resize operation modifies the main buffer and then the
snapshot buffer. If a swap happens in between those two operations it will
break the tracer.
Simply stop the running tracer before resizing the buffers and enable it
again when finished.
Link: https://lkml.kernel.org/r/20231205220010.748996423@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 3928a8a2d9 ("ftrace: make work with new ring buffer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
It use to be that only the top level instance had a snapshot buffer (for
latency tracers like wakeup and irqsoff). The update of the ring buffer
size would check if the instance was the top level and if so, it would
also update the snapshot buffer as it needs to be the same as the main
buffer.
Now that lower level instances also has a snapshot buffer, they too need
to update their snapshot buffer sizes when the main buffer is changed,
otherwise the following can be triggered:
# cd /sys/kernel/tracing
# echo 1500 > buffer_size_kb
# mkdir instances/foo
# echo irqsoff > instances/foo/current_tracer
# echo 1000 > instances/foo/buffer_size_kb
Produces:
WARNING: CPU: 2 PID: 856 at kernel/trace/trace.c:1938 update_max_tr_single.part.0+0x27d/0x320
Which is:
ret = ring_buffer_swap_cpu(tr->max_buffer.buffer, tr->array_buffer.buffer, cpu);
if (ret == -EBUSY) {
[..]
}
WARN_ON_ONCE(ret && ret != -EAGAIN && ret != -EBUSY); <== here
That's because ring_buffer_swap_cpu() has:
int ret = -EINVAL;
[..]
/* At least make sure the two buffers are somewhat the same */
if (cpu_buffer_a->nr_pages != cpu_buffer_b->nr_pages)
goto out;
[..]
out:
return ret;
}
Instead, update all instances' snapshot buffer sizes when their main
buffer size is updated.
Link: https://lkml.kernel.org/r/20231205220010.454662151@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 6d9b3fa5e7 ("tracing: Move tracing_max_latency into trace_array")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Similar to special handling of STACK_ZERO, when reading 1/2/4 bytes from
stack from slot that has register spilled into it and that register has
a constant value zero, preserve that zero and mark spilled register as
precise for that. This makes spilled const zero register and STACK_ZERO
cases equivalent in their behavior.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231205184248.1502704-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of always forcing STACK_ZERO slots to STACK_MISC, preserve it in
situations where this is possible. E.g., when spilling register as
1/2/4-byte subslots on the stack, all the remaining bytes in the stack
slot do not automatically become unknown. If we knew they contained
zeroes, we can preserve those STACK_ZERO markers.
Add a helper mark_stack_slot_misc(), similar to scrub_spilled_slot(),
but that doesn't overwrite either STACK_INVALID nor STACK_ZERO. Note
that we need to take into account possibility of being in unprivileged
mode, in which case STACK_INVALID is forced to STACK_MISC for correctness,
as treating STACK_INVALID as equivalent STACK_MISC is only enabled in
privileged mode.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231205184248.1502704-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When register is spilled onto a stack as a 1/2/4-byte register, we set
slot_type[BPF_REG_SIZE - 1] (plus potentially few more below it,
depending on actual spill size). So to check if some stack slot has
spilled register we need to consult slot_type[7], not slot_type[0].
To avoid the need to remember and double-check this in the future, just
use is_spilled_reg() helper.
Fixes: 27113c59b6 ("bpf: Check the other end of slot_type for STACK_SPILL")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231205184248.1502704-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use instruction (jump) history to record instructions that performed
register spill/fill to/from stack, regardless if this was done through
read-only r10 register, or any other register after copying r10 into it
*and* potentially adjusting offset.
To make this work reliably, we push extra per-instruction flags into
instruction history, encoding stack slot index (spi) and stack frame
number in extra 10 bit flags we take away from prev_idx in instruction
history. We don't touch idx field for maximum performance, as it's
checked most frequently during backtracking.
This change removes basically the last remaining practical limitation of
precision backtracking logic in BPF verifier. It fixes known
deficiencies, but also opens up new opportunities to reduce number of
verified states, explored in the subsequent patches.
There are only three differences in selftests' BPF object files
according to veristat, all in the positive direction (less states).
File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF)
-------------------------------------- ------------- --------- --------- ------------- ---------- ---------- -------------
test_cls_redirect_dynptr.bpf.linked3.o cls_redirect 2987 2864 -123 (-4.12%) 240 231 -9 (-3.75%)
xdp_synproxy_kern.bpf.linked3.o syncookie_tc 82848 82661 -187 (-0.23%) 5107 5073 -34 (-0.67%)
xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 85116 84964 -152 (-0.18%) 5162 5130 -32 (-0.62%)
Note, I avoided renaming jmp_history to more generic insn_hist to
minimize number of lines changed and potential merge conflicts between
bpf and bpf-next trees.
Notice also cur_hist_entry pointer reset to NULL at the beginning of
instruction verification loop. This pointer avoids the problem of
relying on last jump history entry's insn_idx to determine whether we
already have entry for current instruction or not. It can happen that we
added jump history entry because current instruction is_jmp_point(), but
also we need to add instruction flags for stack access. In this case, we
don't want to entries, so we need to reuse last added entry, if it is
present.
Relying on insn_idx comparison has the same ambiguity problem as the one
that was fixed recently in [0], so we avoid that.
[0] https://patchwork.kernel.org/project/netdevbpf/patch/20231110002638.4168352-3-andrii@kernel.org/
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Reported-by: Tao Lyu <tao.lyu@epfl.ch>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231205184248.1502704-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When removing the inner map from the outer map, the inner map will be
freed after one RCU grace period and one RCU tasks trace grace
period, so it is certain that the bpf program, which may access the
inner map, has exited before the inner map is freed.
However there is no need to wait for one RCU tasks trace grace period if
the outer map is only accessed by non-sleepable program. So adding
sleepable_refcnt in bpf_map and increasing sleepable_refcnt when adding
the outer map into env->used_maps for sleepable program. Although the
max number of bpf program is INT_MAX - 1, the number of bpf programs
which are being loaded may be greater than INT_MAX, so using atomic64_t
instead of atomic_t for sleepable_refcnt. When removing the inner map
from the outer map, using sleepable_refcnt to decide whether or not a
RCU tasks trace grace period is needed before freeing the inner map.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231204140425.1480317-6-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When updating or deleting an inner map in map array or map htab, the map
may still be accessed by non-sleepable program or sleepable program.
However bpf_map_fd_put_ptr() decreases the ref-counter of the inner map
directly through bpf_map_put(), if the ref-counter is the last one
(which is true for most cases), the inner map will be freed by
ops->map_free() in a kworker. But for now, most .map_free() callbacks
don't use synchronize_rcu() or its variants to wait for the elapse of a
RCU grace period, so after the invocation of ops->map_free completes,
the bpf program which is accessing the inner map may incur
use-after-free problem.
Fix the free of inner map by invoking bpf_map_free_deferred() after both
one RCU grace period and one tasks trace RCU grace period if the inner
map has been removed from the outer map before. The deferment is
accomplished by using call_rcu() or call_rcu_tasks_trace() when
releasing the last ref-counter of bpf map. The newly-added rcu_head
field in bpf_map shares the same storage space with work field to
reduce the size of bpf_map.
Fixes: bba1dc0b55 ("bpf: Remove redundant synchronize_rcu.")
Fixes: 638e4b825d ("bpf: Allows per-cpu maps and map-in-map in sleepable programs")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231204140425.1480317-5-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Both map deletion operation, map release and map free operation use
fd_array_map_delete_elem() to remove the element from fd array and
need_defer is always true in fd_array_map_delete_elem(). For the map
deletion operation and map release operation, need_defer=true is
necessary, because the bpf program, which accesses the element in fd
array, may still alive. However for map free operation, it is certain
that the bpf program which owns the fd array has already been exited, so
setting need_defer as false is appropriate for map free operation.
So fix it by adding need_defer parameter to bpf_fd_array_map_clear() and
adding a new helper __fd_array_map_delete_elem() to handle the map
deletion, map release and map free operations correspondingly.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231204140425.1480317-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
map is the pointer of outer map, and need_defer needs some explanation.
need_defer tells the implementation to defer the reference release of
the passed element and ensure that the element is still alive before
the bpf program, which may manipulate it, exits.
The following three cases will invoke map_fd_put_ptr() and different
need_defer values will be passed to these callers:
1) release the reference of the old element in the map during map update
or map deletion. The release must be deferred, otherwise the bpf
program may incur use-after-free problem, so need_defer needs to be
true.
2) release the reference of the to-be-added element in the error path of
map update. The to-be-added element is not visible to any bpf
program, so it is OK to pass false for need_defer parameter.
3) release the references of all elements in the map during map release.
Any bpf program which has access to the map must have been exited and
released, so need_defer=false will be OK.
These two parameters will be used by the following patches to fix the
potential use-after-free problem for map-in-map.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231204140425.1480317-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently get_free_mem_region() searches for available capacity
in increments equal to the region size being requested. This can
cause the search to take giant steps through the resource leaving
needless gaps and missing available space.
Specifically 'cxl create-region' fails with ERANGE even though capacity
of the given size and CXL's expected 256M x InterleaveWays alignment can
be satisfied.
Replace the total-request-size increment with a next alignment increment
so that the next possible address is always examined for availability.
Fixes: 14b80582c4 ("resource: Introduce alloc_free_mem_region()")
Reported-by: Dmytro Adamenko <dmytro.adamenko@intel.com>
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231113221324.1118092-1-alison.schofield@intel.com
Cc: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull probes fixes from Masami Hiramatsu:
- objpool: Fix objpool overrun case on memory/cache access delay
especially on the big.LITTLE SoC. The objpool uses a copy of object
slot index internal loop, but the slot index can be changed on
another processor in parallel. In that case, the difference of 'head'
local copy and the 'slot->last' index will be bigger than local slot
size. In that case, we need to re-read the slot::head to update it.
- kretprobe: Fix to use appropriate rcu API for kretprobe holder. Since
kretprobe_holder::rp is RCU managed, it should use
rcu_assign_pointer() and rcu_dereference_check() correctly. Also
adding __rcu tag for finding wrong usage by sparse.
- rethook: Fix to use appropriate rcu API for rethook::handler. The
same as kretprobe, rethook::handler is RCU managed and it should use
rcu_assign_pointer() and rcu_dereference_check(). This also adds
__rcu tag for finding wrong usage by sparse.
* tag 'probes-fixes-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rethook: Use __rcu pointer for rethook::handler
kprobes: consistent rcu api usage for kretprobe holder
lib: objpool: fix head overrun on RK3588 SBC
