We need it here for the USB fixes, and it resolves a merge conflict as
reported in linux-next in drivers/usb/roles/class.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since only 64bit KVM selftests were supported on all architectures,
add the CONFIG_64BIT definition in kvm/Makefile to ensure only 64bit
definitions were available in the corresponding included files.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Split the arch-neutral test code out of aarch64/arch_timer.c
and put them into a common arch_timer.c. This is a preparation
to share timer test codes in riscv.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
There are intermittent failures occurred when stressing the
arch-timer test in a Qemu VM:
Guest assert failed, vcpu 0; stage; 4; iter: 3
==== Test Assertion Failure ====
aarch64/arch_timer.c:196: config_iter + 1 == irq_iter
pid=4048 tid=4049 errno=4 - Interrupted system call
1 0x000000000040253b: test_vcpu_run at arch_timer.c:248
2 0x0000ffffb60dd5c7: ?? ??:0
3 0x0000ffffb6145d1b: ?? ??:0
0x3 != 0x2 (config_iter + 1 != irq_iter)e
Further test and debug show that the timeout for an interrupt
to arrive do have random high fluctuation, espectially when
testing in an virtual environment.
To alleviate this issue, just expose the timeout value as user
configurable and print some hint message to increase the value
when hitting the failure..
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
The introduction of $(SPLIT_TESTS) also introduced a warning when
building selftests on architectures that include get-reg-lists:
make: Entering directory '/root/kvm/tools/testing/selftests/kvm'
Makefile:272: warning: overriding recipe for target '/root/kvm/tools/testing/selftests/kvm/get-reg-list'
Makefile:267: warning: ignoring old recipe for target '/root/kvm/tools/testing/selftests/kvm/get-reg-list'
make: Leaving directory '/root/kvm/tools/testing/selftests/kvm'
In addition, the rule for $(SPLIT_TESTS_TARGETS) includes _all_
the $(SPLIT_TESTS_OBJS), which only works because there is just one.
So fix both by adjusting the rules:
- remove $(SPLIT_TESTS_TARGETS) from the $(TEST_GEN_PROGS) rules,
and rename it to $(SPLIT_TEST_GEN_PROGS)
- fix $(SPLIT_TESTS_OBJS) so that it plays well with $(OUTPUT),
rename it to $(SPLIT_TEST_GEN_OBJ), and list the object file
explicitly in the $(SPLIT_TEST_GEN_PROGS) link rule
Fixes: 17da79e009 ("KVM: arm64: selftests: Split get-reg-list test code", 2023-08-09)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
Pull cxl fixes from Dan Williams:
"A collection of significant fixes for the CXL subsystem.
The largest change in this set, that bordered on "new development", is
the fix for the fact that the location of the new qos_class attribute
did not match the Documentation. The fix ends up deleting more code
than it added, and it has a new unit test to backstop basic errors in
this interface going forward. So the "red-diff" and unit test saved
the "rip it out and try again" response.
In contrast, the new notification path for firmware reported CXL
errors (CXL CPER notifications) has a locking context bug that can not
be fixed with a red-diff. Given where the release cycle stands, it is
not comfortable to squeeze in that fix in these waning days. So, that
receives the "back it out and try again later" treatment.
There is a regression fix in the code that establishes memory NUMA
nodes for platform CXL regions. That has an ack from x86 folks. There
are a couple more fixups for Linux to understand (reassemble) CXL
regions instantiated by platform firmware. The policy around platforms
that do not match host-physical-address with system-physical-address
(i.e. systems that have an address translation mechanism between the
address range reported in the ACPI CEDT.CFMWS and endpoint decoders)
has been softened to abort driver load rather than teardown the memory
range (can cause system hangs). Lastly, there is a robustness /
regression fix for cases where the driver would previously continue in
the face of error, and a fixup for PCI error notification handling.
Summary:
- Fix NUMA initialization from ACPI CEDT.CFMWS
- Fix region assembly failures due to async init order
- Fix / simplify export of qos_class information
- Fix cxl_acpi initialization vs single-window-init failures
- Fix handling of repeated 'pci_channel_io_frozen' notifications
- Workaround platforms that violate host-physical-address ==
system-physical address assumptions
- Defer CXL CPER notification handling to v6.9"
* tag 'cxl-fixes-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/acpi: Fix load failures due to single window creation failure
acpi/ghes: Remove CXL CPER notifications
cxl/pci: Fix disabling memory if DVSEC CXL Range does not match a CFMWS window
cxl/test: Add support for qos_class checking
cxl: Fix sysfs export of qos_class for memdev
cxl: Remove unnecessary type cast in cxl_qos_class_verify()
cxl: Change 'struct cxl_memdev_state' *_perf_list to single 'struct cxl_dpa_perf'
cxl/region: Allow out of order assembly of autodiscovered regions
cxl/region: Handle endpoint decoders in cxl_region_find_decoder()
x86/numa: Fix the sort compare func used in numa_fill_memblks()
x86/numa: Fix the address overlap check in numa_fill_memblks()
cxl/pci: Skip to handle RAS errors if CXL.mem device is detached
Add tests for both L2 and L3 CAT to verify the return values
generated by writing non-contiguous CBMs don't contradict the
reported non-contiguous support information.
Use a logical XOR to confirm return value of write_schemata() and
non-contiguous CBMs support information match.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Feature checking done by resctrl_mon_feature_exists() covers features
represented by the feature name presence inside the 'mon_features' file
in /sys/fs/resctrl/info/L3_MON directory. There exists a different way
to represent feature support and that is by the presence of 0 or 1 in a
single file in the info/resource directory. In this case the filename
represents what feature support is being indicated.
Add a generic function to check file presence in the
/sys/fs/resctrl/info/<RESOURCE> directory.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
validate_resctrl_feature_request() is used to test both if a resource is
present in the info directory, and if a passed monitoring feature is
present in the mon_features file.
Refactor validate_resctrl_feature_request() into two smaller functions
that each accomplish one check to give feature checking more
granularity:
- Resource directory presence in the /sys/fs/resctrl/info directory.
- Feature name presence in the /sys/fs/resctrl/info/<RESOURCE>/mon_features
file.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The CAT non-contiguous selftests have to read the file responsible for
reporting support of non-contiguous CBMs in kernel (resctrl). Then the
test compares if that information matches what is reported by CPUID
output.
Add a generic helper function to read an unsigned number from
/sys/fs/resctrl/info/<RESOURCE>/<FILE>.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
To select test to run -t parameter can be used. However, -t cat
currently maps to L3 CAT test which will be confusing after more CAT
related tests will be added.
Allow selecting tests as groups and call L3 CAT test "L3_CAT", "CAT"
group will enable all CAT related tests.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull misc fixes from Andrew Morton:
"A batch of MM (and one non-MM) hotfixes.
Ten are cc:stable and the remainder address post-6.7 issues or aren't
considered appropriate for backporting"
* tag 'mm-hotfixes-stable-2024-02-22-15-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
kasan: guard release_free_meta() shadow access with kasan_arch_is_ready()
mm/damon/lru_sort: fix quota status loss due to online tunings
mm/damon/reclaim: fix quota stauts loss due to online tunings
MAINTAINERS: mailmap: update Shakeel's email address
mm/damon/sysfs-schemes: handle schemes sysfs dir removal before commit_schemes_quota_goals
mm: memcontrol: clarify swapaccount=0 deprecation warning
mm/memblock: add MEMBLOCK_RSRV_NOINIT into flagname[] array
mm/zswap: invalidate duplicate entry when !zswap_enabled
lib/Kconfig.debug: TEST_IOV_ITER depends on MMU
mm/swap: fix race when skipping swapcache
mm/swap_state: update zswap LRU's protection range with the folio locked
selftests/mm: uffd-unit-test check if huge page size is 0
mm/damon/core: check apply interval in damon_do_apply_schemes()
mm: zswap: fix missing folio cleanup in writeback race path
Extend set_memory_region_test's invalid flags subtest to verify that
GUEST_MEMFD is incompatible with READONLY. GUEST_MEMFD doesn't currently
support writes from userspace and KVM doesn't support emulated MMIO on
private accesses, and so KVM is supposed to reject the GUEST_MEMFD+READONLY
in order to avoid configuration that KVM can't support.
Link: https://lore.kernel.org/r/20240222190612.2942589-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Actually create a GUEST_MEMFD instance and pass it to KVM when doing
negative tests for KVM_SET_USER_MEMORY_REGION2 + KVM_MEM_GUEST_MEMFD.
Without a valid GUEST_MEMFD file descriptor, KVM_SET_USER_MEMORY_REGION2
will always fail with -EINVAL, resulting in false passes for any and all
tests of illegal combinations of KVM_MEM_GUEST_MEMFD and other flags.
Fixes: 5d74316466 ("KVM: selftests: Add a memory region subtest to validate invalid flags")
Link: https://lore.kernel.org/r/20240222190612.2942589-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Patch series "selftests/mm: Improve run_vmtests.sh", v3.
In this series, I'm trying to add 3 missing tests to vm_runtests.sh which
is used to run all the tests in mm suite. These tests weren't running by
CIs. While enabling them and through review feedback, I've fixed some
problems in tests as well. I've found more flakiness in more tests which
I'll be fixing with future patches.
hugetlb-read-hwpoison test is being added where it can only run with newly
added "-d" (destructive) flag only. Not sure why it is failing again. So
once it become stable, we can think of moving it to default set of tests
if it doesn't have any side-effect to them.
This patch (of 5):
Do not unmount the cgroup if it wasn't mounted by the test. The earlier
patch had fixed this for charge_reserved_hugetlb, but not for this test.
I'm adding fixes tag to that earlier patch.
Link: https://lkml.kernel.org/r/20240125154608.720072-1-usama.anjum@collabora.com
Link: https://lkml.kernel.org/r/20240125154608.720072-2-usama.anjum@collabora.com
Fixes: 209376ed2a ("selftests/vm: make charge_reserved_hugetlb.sh work with existing cgroup setting")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ensure struct_ops rejects the registration of struct_ops types without
proper CFI stub functions.
bpf_test_no_cfi.ko is a module that attempts to register a struct_ops type
called "bpf_test_no_cfi_ops" with cfi_stubs of NULL and non-NULL value.
The NULL one should fail, and the non-NULL one should succeed. The module
can only be loaded successfully if these registrations yield the expected
results.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240222021105.1180475-3-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Pull iommufd fixes from Jason Gunthorpe:
- Fix dirty tracking bitmap collection when using reporting bitmaps
that are not neatly aligned to u64's or match the IO page table radix
tree layout.
- Add self tests to cover the cases that were found to be broken.
- Add missing enforcement of invalidation type in the uapi.
- Fix selftest config generation
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
selftests/iommu: fix the config fragment
iommufd: Reject non-zero data_type if no data_len is provided
iommufd/iova_bitmap: Consider page offset for the pages to be pinned
iommufd/selftest: Add mock IO hugepages tests
iommufd/selftest: Hugepage mock domain support
iommufd/selftest: Refactor mock_domain_read_and_clear_dirty()
iommufd/selftest: Refactor dirty bitmap tests
iommufd/iova_bitmap: Handle recording beyond the mapped pages
iommufd/selftest: Test u64 unaligned bitmaps
iommufd/iova_bitmap: Switch iova_bitmap::bitmap to an u8 array
iommufd/iova_bitmap: Bounds check mapped::pages access
Every test result report in the compaction test prints a distinct log
messae, and some of the reports print a name that varies at runtime. This
causes problems for automation since a lot of automation software uses the
printed string as the name of the test, if the name varies from run to run
and from pass to fail then the automation software can't identify that a
test changed result or that the same tests are being run.
Refactor the logging to use a consistent name when printing the result of
the test, printing the existing messages as diagnostic information instead
so they are still available for people trying to interpret the results.
Link: https://lkml.kernel.org/r/20240209-kselftest-mm-cleanup-v1-2-a3c0386496b5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a selftest for verifying the DAMOS quota feature. The test is very
similar to sysfs_update_schemes_tried_regions_wss_estimation.py. It
starts an artificial workload of 20 MiB working set, run DAMON to find the
working set size, but with 1 MiB/100 ms size quota. Then, it collect the
DAMON-found working set size every 100 ms and check if the quota was
always applied as expected. For the confirmation, the tests shows the
stat-applied region size and the qt_exceeds stat.
Link: https://lkml.kernel.org/r/20240207203134.69976-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/damon: add more tests for core functionalities and
corner cases".
Continue DAMON selftests' test coverage improvement works with a trivial
improvement of the test code itself. The sequence of the patches in
patchset is as follows.
The first five patches add two DAMON core functionalities tests. Those
begins with three patches (patches 1-3) that update the test-purpose DAMON
sysfs interface wrapper to support DAMOS quota, stats, and apply interval
features, respectively. The fourth patch implements and adds a selftest
for DAMOS quota feature, using the DAMON sysfs interface wrapper's newly
added support of the quota and the stats feature. The fifth patch further
implements and adds a selftest for DAMOS apply interval using the DAMON
sysfs interface wrapper's newly added support of the apply interval and
the stats feature.
Two patches (patches 6 and 7) for implementing and adding two corner cases
handling selftests follow. Those try to avoid two previously fixed bugs
from recurring.
Finally, a patch for making DAMON debugfs selftests dependency checker to
use /proc/mounts instead of the hard-coded mount point assumption follows.
This patch (of 8):
Update the test-purpose DAMON sysfs control Python module to support DAMOS
quota.
Link: https://lkml.kernel.org/r/20240207203134.69976-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240207203134.69976-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Also remove unneeded logging which isn't enabled. Skip a hugepage size if
it has less free pages to avoid unnecessary failures. For examples, some
systems may not have 1GB hugepage free. So skip 1GB for testing in this
test instead of failing the entire test.
Link: https://lkml.kernel.org/r/20240202113119.2047740-11-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
