Pull bpf fixes from Daniel Borkmann:
- Fix a mismatching RCU unlock flavor in bpf_out_neigh_v6 (Jiawei Ye)
- Fix BPF sockmap with kTLS to reject vsock and unix sockets upon kTLS
context retrieval (Zijian Zhang)
- Fix BPF bits iterator selftest for s390x (Hou Tao)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix mismatched RCU unlock flavour in bpf_out_neigh_v6
bpf: Add sk_is_inet and IS_ICSK check in tls_sw_has_ctx_tx/rx
selftests/bpf: Use -4095 as the bad address for bits iterator
Pull misc fixes from Andrew Morton:
"10 hotfixes, 7 of which are cc:stable. 7 are MM, 3 are not. All
singletons"
* tag 'mm-hotfixes-stable-2024-11-12-16-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: swapfile: fix cluster reclaim work crash on rotational devices
selftests: hugetlb_dio: fixup check for initial conditions to skip in the start
mm/thp: fix deferred split queue not partially_mapped: fix
mm/gup: avoid an unnecessary allocation call for FOLL_LONGTERM cases
nommu: pass NULL argument to vma_iter_prealloc()
ocfs2: fix UBSAN warning in ocfs2_verify_volume()
nilfs2: fix null-ptr-deref in block_dirty_buffer tracepoint
nilfs2: fix null-ptr-deref in block_touch_buffer tracepoint
mm: page_alloc: move mlocked flag clearance into free_pages_prepare()
mm: count zeromap read and set for swapout and swapin
Pull kvm fixes from Paolo Bonzini:
"x86 and selftests fixes.
x86:
- When emulating a guest TLB flush for a nested guest, flush vpid01,
not vpid02, if L2 is active but VPID is disabled in vmcs12, i.e. if
L2 and L1 are sharing VPID '0' (from L1's perspective).
- Fix a bug in the SNP initialization flow where KVM would return '0'
to userspace instead of -errno on failure.
- Move the Intel PT virtualization (i.e. outputting host trace to
host buffer and guest trace to guest buffer) behind CONFIG_BROKEN.
- Fix memory leak on failure of KVM_SEV_SNP_LAUNCH_START
- Fix a bug where KVM fails to inject an interrupt from the IRR after
KVM_SET_LAPIC.
Selftests:
- Increase the timeout for the memslot performance selftest to avoid
false failures on arm64 and nested x86 platforms.
- Fix a goof in the guest_memfd selftest where a for-loop initialized
a bit mask to zero instead of BIT(0).
- Disable strict aliasing when building KVM selftests to prevent the
compiler from treating things like "u64 *" to "uint64_t *" cases as
undefined behavior, which can lead to nasty, hard to debug
failures.
- Force -march=x86-64-v2 for KVM x86 selftests if and only if the
uarch is supported by the compiler.
- Fix broken compilation of kvm selftests after a header sync in
tools/"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: Bury Intel PT virtualization (guest/host mode) behind CONFIG_BROKEN
KVM: x86: Unconditionally set irr_pending when updating APICv state
kvm: svm: Fix gctx page leak on invalid inputs
KVM: selftests: use X86_MEMTYPE_WB instead of VMX_BASIC_MEM_TYPE_WB
KVM: SVM: Propagate error from snp_guest_req_init() to userspace
KVM: nVMX: Treat vpid01 as current if L2 is active, but with VPID disabled
KVM: selftests: Don't force -march=x86-64-v2 if it's unsupported
KVM: selftests: Disable strict aliasing
KVM: selftests: fix unintentional noop test in guest_memfd_test.c
KVM: selftests: memslot_perf_test: increase guest sync timeout
This test verifies that a hugepage, used as a user buffer for DIO
operations, is correctly freed upon unmapping. To test this, we read the
count of free hugepages before and after the mmap, DIO, and munmap
operations, then check if the free hugepage count is the same.
Reading free hugepages before the test was removed by commit 0268d45799
('selftests: hugetlb_dio: check for initial conditions to skip at the
start'), causing the test to always fail.
This patch adds back reading the free hugepages before starting the test.
With this patch, the tests are now passing.
Test results without this patch:
./tools/testing/selftests/mm/hugetlb_dio
TAP version 13
1..4
# No. Free pages before allocation : 0
# No. Free pages after munmap : 100
not ok 1 : Huge pages not freed!
# No. Free pages before allocation : 0
# No. Free pages after munmap : 100
not ok 2 : Huge pages not freed!
# No. Free pages before allocation : 0
# No. Free pages after munmap : 100
not ok 3 : Huge pages not freed!
# No. Free pages before allocation : 0
# No. Free pages after munmap : 100
not ok 4 : Huge pages not freed!
# Totals: pass:0 fail:4 xfail:0 xpass:0 skip:0 error:0
Test results with this patch:
/tools/testing/selftests/mm/hugetlb_dio
TAP version 13
1..4
# No. Free pages before allocation : 100
# No. Free pages after munmap : 100
ok 1 : Huge pages freed successfully !
# No. Free pages before allocation : 100
# No. Free pages after munmap : 100
ok 2 : Huge pages freed successfully !
# No. Free pages before allocation : 100
# No. Free pages after munmap : 100
ok 3 : Huge pages freed successfully !
# No. Free pages before allocation : 100
# No. Free pages after munmap : 100
ok 4 : Huge pages freed successfully !
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://lkml.kernel.org/r/20241110064903.23626-1-donettom@linux.ibm.com
Fixes: 0268d45799 ("selftests: hugetlb_dio: check for initial conditions to skip in the start")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Check number of paths by fib_info_num_path(),
and update_or_create_fnhe() for every path.
Problem is that pmtu is cached only for the oif
that has received icmp message "need to frag",
other oifs will still try to use "default" iface mtu.
An example topology showing the problem:
| host1
+---------+
| dummy0 | 10.179.20.18/32 mtu9000
+---------+
+-----------+----------------+
+---------+ +---------+
| ens17f0 | 10.179.2.141/31 | ens17f1 | 10.179.2.13/31
+---------+ +---------+
| (all here have mtu 9000) |
+------+ +------+
| ro1 | 10.179.2.140/31 | ro2 | 10.179.2.12/31
+------+ +------+
| |
---------+------------+-------------------+------
|
+-----+
| ro3 | 10.10.10.10 mtu1500
+-----+
|
========================================
some networks
========================================
|
+-----+
| eth0| 10.10.30.30 mtu9000
+-----+
| host2
host1 have enabled multipath and
sysctl net.ipv4.fib_multipath_hash_policy = 1:
default proto static src 10.179.20.18
nexthop via 10.179.2.12 dev ens17f1 weight 1
nexthop via 10.179.2.140 dev ens17f0 weight 1
When host1 tries to do pmtud from 10.179.20.18/32 to host2,
host1 receives at ens17f1 iface an icmp packet from ro3 that ro3 mtu=1500.
And host1 caches it in nexthop exceptions cache.
Problem is that it is cached only for the iface that has received icmp,
and there is no way that ro3 will send icmp msg to host1 via another path.
Host1 now have this routes to host2:
ip r g 10.10.30.30 sport 30000 dport 443
10.10.30.30 via 10.179.2.12 dev ens17f1 src 10.179.20.18 uid 0
cache expires 521sec mtu 1500
ip r g 10.10.30.30 sport 30033 dport 443
10.10.30.30 via 10.179.2.140 dev ens17f0 src 10.179.20.18 uid 0
cache
So when host1 tries again to reach host2 with mtu>1500,
if packet flow is lucky enough to be hashed with oif=ens17f1 its ok,
if oif=ens17f0 it blackholes and still gets icmp msgs from ro3 to ens17f1,
until lucky day when ro3 will send it through another flow to ens17f0.
Signed-off-by: Vladimir Vdovin <deliran@verdict.gg>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20241108093427.317942-1-deliran@verdict.gg
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netconsole selftest relies on the availability of the netdevsim module.
To ensure the test can run correctly, we need to check if the netdevsim
module is either loaded or built-in before proceeding.
Update the netconsole selftest to check for the existence of
the /sys/bus/netdevsim/new_device file before running the test. If the
file is not found, the test is skipped with an explanation that the
CONFIG_NETDEVSIM kernel config option may not be enabled.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241108-netcon_selftest_deps-v1-1-1789cbf3adcd@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an epoll busy poll test using netdevsim.
This test is comprised of:
- busy_poller (via busy_poller.c)
- busy_poll_test.sh which loads netdevsim, sets up network namespaces,
and runs busy_poller to receive data and socat to send data.
The selftest tests two different scenarios:
- busy poll (the pre-existing version in the kernel)
- busy poll with suspend enabled (what this series adds)
The data transmit is a 1MiB temporary file generated from /dev/urandom
and the test is considered passing if the md5sum of the input file to
socat matches the md5sum of the output file from busy_poller.
netdevsim was chosen instead of veth due to netdevsim's support for
netdev-genl.
For now, this test uses the functionality that netdevsim provides. In the
future, perhaps netdevsim can be extended to emulate device IRQs to more
thoroughly test all pre-existing kernel options (like defer_hard_irqs)
and suspend.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Co-developed-by: Martin Karsten <mkarsten@uwaterloo.ca>
Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20241109050245.191288-6-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only RX side for now and small message to test the setup.
In the future, we can extend it to TX side and to testing
both sides with a couple of megs of data.
make \
-C tools/testing/selftests \
TARGETS="drivers/hw/net" \
install INSTALL_PATH=~/tmp/ksft
scp ~/tmp/ksft ${HOST}:
scp ~/tmp/ksft ${PEER}:
cfg+="NETIF=${DEV}\n"
cfg+="LOCAL_V6=${HOST_IP}\n"
cfg+="REMOTE_V6=${PEER_IP}\n"
cfg+="REMOTE_TYPE=ssh\n"
cfg+="REMOTE_ARGS=root@${PEER}\n"
echo -e "$cfg" | ssh root@${HOST} "cat > ksft/drivers/net/net.config"
ssh root@${HOST} "cd ksft && ./run_kselftest.sh -t drivers/net:devmem.py"
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241107181211.3934153-13-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the next patch the hard-coded queue numbers are gonna be removed.
So introduce some initial support for ethtool YNL and use
it to enable header split.
Also, tcp-data-split requires latest ethtool which is unlikely
to be present in the distros right now.
(ideally, we should not shell out to ethtool at all).
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241107181211.3934153-9-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Soft lockups have been observed on a cluster of Linux-based edge routers
located in a highly dynamic environment. Using the `bird` service, these
routers continuously update BGP-advertised routes due to frequently
changing nexthop destinations, while also managing significant IPv6
traffic. The lockups occur during the traversal of the multipath
circular linked-list in the `fib6_select_path` function, particularly
while iterating through the siblings in the list. The issue typically
arises when the nodes of the linked list are unexpectedly deleted
concurrently on a different core—indicated by their 'next' and
'previous' elements pointing back to the node itself and their reference
count dropping to zero. This results in an infinite loop, leading to a
soft lockup that triggers a system panic via the watchdog timer.
Apply RCU primitives in the problematic code sections to resolve the
issue. Where necessary, update the references to fib6_siblings to
annotate or use the RCU APIs.
Include a test script that reproduces the issue. The script
periodically updates the routing table while generating a heavy load
of outgoing IPv6 traffic through multiple iperf3 clients. It
consistently induces infinite soft lockups within a couple of minutes.
Kernel log:
0 [ffffbd13003e8d30] machine_kexec at ffffffff8ceaf3eb
1 [ffffbd13003e8d90] __crash_kexec at ffffffff8d0120e3
2 [ffffbd13003e8e58] panic at ffffffff8cef65d4
3 [ffffbd13003e8ed8] watchdog_timer_fn at ffffffff8d05cb03
4 [ffffbd13003e8f08] __hrtimer_run_queues at ffffffff8cfec62f
5 [ffffbd13003e8f70] hrtimer_interrupt at ffffffff8cfed756
6 [ffffbd13003e8fd0] __sysvec_apic_timer_interrupt at ffffffff8cea01af
7 [ffffbd13003e8ff0] sysvec_apic_timer_interrupt at ffffffff8df1b83d
-- <IRQ stack> --
8 [ffffbd13003d3708] asm_sysvec_apic_timer_interrupt at ffffffff8e000ecb
[exception RIP: fib6_select_path+299]
RIP: ffffffff8ddafe7b RSP: ffffbd13003d37b8 RFLAGS: 00000287
RAX: ffff975850b43600 RBX: ffff975850b40200 RCX: 0000000000000000
RDX: 000000003fffffff RSI: 0000000051d383e4 RDI: ffff975850b43618
RBP: ffffbd13003d3800 R8: 0000000000000000 R9: ffff975850b40200
R10: 0000000000000000 R11: 0000000000000000 R12: ffffbd13003d3830
R13: ffff975850b436a8 R14: ffff975850b43600 R15: 0000000000000007
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
9 [ffffbd13003d3808] ip6_pol_route at ffffffff8ddb030c
10 [ffffbd13003d3888] ip6_pol_route_input at ffffffff8ddb068c
11 [ffffbd13003d3898] fib6_rule_lookup at ffffffff8ddf02b5
12 [ffffbd13003d3928] ip6_route_input at ffffffff8ddb0f47
13 [ffffbd13003d3a18] ip6_rcv_finish_core.constprop.0 at ffffffff8dd950d0
14 [ffffbd13003d3a30] ip6_list_rcv_finish.constprop.0 at ffffffff8dd96274
15 [ffffbd13003d3a98] ip6_sublist_rcv at ffffffff8dd96474
16 [ffffbd13003d3af8] ipv6_list_rcv at ffffffff8dd96615
17 [ffffbd13003d3b60] __netif_receive_skb_list_core at ffffffff8dc16fec
18 [ffffbd13003d3be0] netif_receive_skb_list_internal at ffffffff8dc176b3
19 [ffffbd13003d3c50] napi_gro_receive at ffffffff8dc565b9
20 [ffffbd13003d3c80] ice_receive_skb at ffffffffc087e4f5 [ice]
21 [ffffbd13003d3c90] ice_clean_rx_irq at ffffffffc0881b80 [ice]
22 [ffffbd13003d3d20] ice_napi_poll at ffffffffc088232f [ice]
23 [ffffbd13003d3d80] __napi_poll at ffffffff8dc18000
24 [ffffbd13003d3db8] net_rx_action at ffffffff8dc18581
25 [ffffbd13003d3e40] __do_softirq at ffffffff8df352e9
26 [ffffbd13003d3eb0] run_ksoftirqd at ffffffff8ceffe47
27 [ffffbd13003d3ec0] smpboot_thread_fn at ffffffff8cf36a30
28 [ffffbd13003d3ee8] kthread at ffffffff8cf2b39f
29 [ffffbd13003d3f28] ret_from_fork at ffffffff8ce5fa64
30 [ffffbd13003d3f50] ret_from_fork_asm at ffffffff8ce03cbb
Fixes: 66f5d6ce53 ("ipv6: replace rwlock with rcu and spinlock in fib6_table")
Reported-by: Adrian Oliver <kernel@aoliver.ca>
Signed-off-by: Omid Ehtemam-Haghighi <omid.ehtemamhaghighi@menlosecurity.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241106010236.1239299-1-omid.ehtemamhaghighi@menlosecurity.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull misc fixes from Andrew Morton:
"20 hotfixes, 14 of which are cc:stable.
Three affect DAMON. Lorenzo's five-patch series to address the
mmap_region error handling is here also.
Apart from that, various singletons"
* tag 'mm-hotfixes-stable-2024-11-09-22-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Thorsten Blum
ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove()
signal: restore the override_rlimit logic
fs/proc: fix compile warning about variable 'vmcore_mmap_ops'
ucounts: fix counter leak in inc_rlimit_get_ucounts()
selftests: hugetlb_dio: check for initial conditions to skip in the start
mm: fix docs for the kernel parameter ``thp_anon=``
mm/damon/core: avoid overflow in damon_feed_loop_next_input()
mm/damon/core: handle zero schemes apply interval
mm/damon/core: handle zero {aggregation,ops_update} intervals
mm/mlock: set the correct prev on failure
objpool: fix to make percpu slot allocation more robust
mm/page_alloc: keep track of free highatomic
mm: resolve faulty mmap_region() error path behaviour
mm: refactor arch_calc_vm_flag_bits() and arm64 MTE handling
mm: refactor map_deny_write_exec()
mm: unconditionally close VMAs on error
mm: avoid unsafe VMA hook invocation when error arises on mmap hook
mm/thp: fix deferred split unqueue naming and locking
mm/thp: fix deferred split queue not partially_mapped
It is currently impossible to delete individual FDB entries (as opposed
to flushing) that were added with a VLAN that no longer exists:
# ip link add name dummy1 up type dummy
# ip link add name br1 up type bridge vlan_filtering 1
# ip link set dev dummy1 master br1
# bridge fdb add 00:11:22:33:44:55 dev dummy1 master static vlan 1
# bridge vlan del vid 1 dev dummy1
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static
# bridge fdb del 00:11:22:33:44:55 dev dummy1 master vlan 1
RTNETLINK answers: Invalid argument
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static
This is in contrast to MDB entries that can be deleted after the VLAN
was deleted:
# bridge vlan add vid 10 dev dummy1
# bridge mdb add dev br1 port dummy1 grp 239.1.1.1 permanent vid 10
# bridge vlan del vid 10 dev dummy1
# bridge mdb get dev br1 grp 239.1.1.1 vid 10
dev br1 port dummy1 grp 239.1.1.1 permanent vid 10
# bridge mdb del dev br1 port dummy1 grp 239.1.1.1 permanent vid 10
# bridge mdb get dev br1 grp 239.1.1.1 vid 10
Error: bridge: MDB entry not found.
Align the two interfaces and allow user space to delete FDB entries that
were added with a VLAN that no longer exists:
# ip link add name dummy1 up type dummy
# ip link add name br1 up type bridge vlan_filtering 1
# ip link set dev dummy1 master br1
# bridge fdb add 00:11:22:33:44:55 dev dummy1 master static vlan 1
# bridge vlan del vid 1 dev dummy1
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
00:11:22:33:44:55 dev dummy1 vlan 1 master br1 static
# bridge fdb del 00:11:22:33:44:55 dev dummy1 master vlan 1
# bridge fdb get 00:11:22:33:44:55 br br1 vlan 1
Error: Fdb entry not found.
Add a selftest to make sure this behavior does not regress:
# ./rtnetlink.sh -t kci_test_fdb_del
PASS: bridge fdb del
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Andy Roulin <aroulin@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241105133954.350479-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KVM x86 and selftests fixes for 6.12:
- Increase the timeout for the memslot performance selftest to avoid false
failures on arm64 and nested x86 platforms.
- Fix a goof in the guest_memfd selftest where a for-loop initialized a
bit mask to zero instead of BIT(0).
- Disable strict aliasing when building KVM selftests to prevent the
compiler from treating things like "u64 *" to "uint64_t *" cases as
undefined behavior, which can lead to nasty, hard to debug failures.
- Force -march=x86-64-v2 for KVM x86 selftests if and only if the uarch
is supported by the compiler.
- When emulating a guest TLB flush for a nested guest, flush vpid01, not
vpid02, if L2 is active but VPID is disabled in vmcs12, i.e. if L2 and
L1 are sharing VPID '0' (from L1's perspective).
- Fix a bug in the SNP initialization flow where KVM would return '0' to
userspace instead of -errno on failure.
The test should be skipped if initial conditions aren't fulfilled in the
start instead of failing and outputting non-compliant TAP logs. This kind
of failure pollutes the results. The initial conditions are:
- The test should only execute if /tmp file can be allocated.
- The test should only execute if huge pages are free.
Before:
TAP version 13
1..4
Bail out! Error opening file
: Read-only file system (30)
# Planned tests != run tests (4 != 0)
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0
After:
TAP version 13
1..0 # SKIP Unable to allocate file: Read-only file system
Link: https://lkml.kernel.org/r/20241101141557.3159432-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Fixes: 3a103b5315 ("selftest: mm: Test if hugepage does not get leaked during __bio_release_pages()")
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Close a socket with dump in progress. We need a dump which generates
enough info not to fit into a single skb. Policy dump fits the bill.
Use the trick discovered by syzbot for keeping a ref on the socket
longer than just close, with mqueue.
TAP version 13
1..3
# Starting 3 tests from 1 test cases.
# RUN global.test_sanity ...
# OK global.test_sanity
ok 1 global.test_sanity
# RUN global.close_in_progress ...
# OK global.close_in_progress
ok 2 global.close_in_progress
# RUN global.close_with_ref ...
# OK global.close_with_ref
ok 3 global.close_with_ref
# PASSED: 3 / 3 tests passed.
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Note that this test is not expected to fail but rather crash
the kernel if we get the cleanup wrong.
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241106015235.2458807-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull tracefs fixes from Steven Rostedt:
"Fix tracefs mount options.
Commit 78ff640819 ("vfs: Convert tracefs to use the new mount API")
broke the gid setting when set by fstab or other mount utility. It is
ignored when it is set. Fix the code so that it recognises the option
again and will honor the settings on mount at boot up.
Update the internal documentation and create a selftest to make sure
it doesn't break again in the future"
* tag 'tracefs-v6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/selftests: Add tracefs mount options test
tracing: Document tracefs gid mount option
tracing: Fix tracefs mount options
Updated to a more recent socat release and saw this:
socat E xioopen_ipdgram_listen(): unknown address family 0
socat W address is opened in read-write mode but only supports read-only
First error is avoided via pf=ipv4 option, second one via -u
(unidirectional) mode.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20241104142821.2608-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test will fail if the initial namespace has conntrack
active due to unexpected number of flows returned on dump:
conntrack_dump_flush.c:451:test_flush_by_zone:Expected ret (7) == 2 (2)
test_flush_by_zone: Test failed
FAIL conntrack_dump_flush.test_flush_by_zone
not ok 2 conntrack_dump_flush.test_flush_by_zone
Add a wrapper that unshares this program to avoid this problem.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20241104142529.2352-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently, the net/lib.sh file has been modified to include defer.sh from
net/lib/sh/ directory. The Makefile from net/lib has been modified
accordingly, but not the ones from the sub-targets using net/lib.sh.
Because of that, the new file is not installed as expected when
installing the Forwarding, MPTCP, and Netfilter targets, e.g.
# make -C tools/testing/selftests TARGETS=net/mptcp install \
INSTALL_PATH=/tmp/kself
# cd /tmp/kself/
# ./run_kselftest.sh -c net/mptcp
TAP version 13
1..7
# timeout set to 1800
# selftests: net/mptcp: mptcp_connect.sh
# ./../lib.sh: line 5: /tmp/kself/net/lib/sh/defer.sh: No such file
or directory
# (...)
This can be fixed simply by adding all the .sh files from net/lib/sh
directory to the TEST_INCLUDES variable in the different Makefile's.
Fixes: a6e263f125 ("selftests: net: lib: Introduce deferred commands")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20241104-net-next-selftests-lib-sh-deps-v1-1-7c9f7d939fc2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As reported by Byeonguk, the bad_words test in verifier_bits_iter.c
occasionally fails on s390 host. Quoting Ilya's explanation:
s390 kernel runs in a completely separate address space, there is no
user/kernel split at TASK_SIZE. The same address may be valid in both
the kernel and the user address spaces, there is no way to tell by
looking at it. The config option related to this property is
ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE.
Also, unfortunately, 0 is a valid address in the s390 kernel address
space.
Fix the issue by using -4095 as the bad address for bits iterator, as
suggested by Ilya. Verify that bpf_iter_bits_new() returns -EINVAL for
NULL address and -EFAULT for bad address.
Fixes: ebafc1e535 ("selftests/bpf: Add three test cases for bits_iter")
Reported-by: Byeonguk Jeong <jungbu2855@gmail.com>
Closes: https://lore.kernel.org/bpf/ZycSXwjH4UTvx-Cn@ub22/
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20241105043057.3371482-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Disable strict aliasing, as has been done in the kernel proper for decades
(literally since before git history) to fix issues where gcc will optimize
away loads in code that looks 100% correct, but is _technically_ undefined
behavior, and thus can be thrown away by the compiler.
E.g. arm64's vPMU counter access test casts a uint64_t (unsigned long)
pointer to a u64 (unsigned long long) pointer when setting PMCR.N via
u64p_replace_bits(), which gcc-13 detects and optimizes away, i.e. ignores
the result and uses the original PMCR.
The issue is most easily observed by making set_pmcr_n() noinline and
wrapping the call with printf(), e.g. sans comments, for this code:
printf("orig = %lx, next = %lx, want = %lu\n", pmcr_orig, pmcr, pmcr_n);
set_pmcr_n(&pmcr, pmcr_n);
printf("orig = %lx, next = %lx, want = %lu\n", pmcr_orig, pmcr, pmcr_n);
gcc-13 generates:
0000000000401c90 <set_pmcr_n>:
401c90: f9400002 ldr x2, [x0]
401c94: b3751022 bfi x2, x1, #11, #5
401c98: f9000002 str x2, [x0]
401c9c: d65f03c0 ret
0000000000402660 <test_create_vpmu_vm_with_pmcr_n>:
402724: aa1403e3 mov x3, x20
402728: aa1503e2 mov x2, x21
40272c: aa1603e0 mov x0, x22
402730: aa1503e1 mov x1, x21
402734: 940060ff bl 41ab30 <_IO_printf>
402738: aa1403e1 mov x1, x20
40273c: 910183e0 add x0, sp, #0x60
402740: 97fffd54 bl 401c90 <set_pmcr_n>
402744: aa1403e3 mov x3, x20
402748: aa1503e2 mov x2, x21
40274c: aa1503e1 mov x1, x21
402750: aa1603e0 mov x0, x22
402754: 940060f7 bl 41ab30 <_IO_printf>
with the value stored in [sp + 0x60] ignored by both printf() above and
in the test proper, resulting in a false failure due to vcpu_set_reg()
simply storing the original value, not the intended value.
$ ./vpmu_counter_access
Random seed: 0x6b8b4567
orig = 3040, next = 3040, want = 0
orig = 3040, next = 3040, want = 0
==== Test Assertion Failure ====
aarch64/vpmu_counter_access.c:505: pmcr_n == get_pmcr_n(pmcr)
pid=71578 tid=71578 errno=9 - Bad file descriptor
1 0x400673: run_access_test at vpmu_counter_access.c:522
2 (inlined by) main at vpmu_counter_access.c:643
3 0x4132d7: __libc_start_call_main at libc-start.o:0
4 0x413653: __libc_start_main at ??:0
5 0x40106f: _start at ??:0
Failed to update PMCR.N to 0 (received: 6)
Somewhat bizarrely, gcc-11 also exhibits the same behavior, but only if
set_pmcr_n() is marked noinline, whereas gcc-13 fails even if set_pmcr_n()
is inlined in its sole caller.
Cc: stable@vger.kernel.org
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=116912
Signed-off-by: Sean Christopherson <seanjc@google.com>
The loop in test_create_guest_memfd_invalid() that is supposed to test
that nothing is accepted as a valid flag to KVM_CREATE_GUEST_MEMFD was
initializing `flag` as 0 instead of BIT(0). This caused the loop to
immediately exit instead of iterating over BIT(0), BIT(1), ... .
Fixes: 8a89efd434 ("KVM: selftests: Add basic selftest for guest_memfd()")
Signed-off-by: Patrick Roy <roypat@amazon.co.uk>
Reviewed-by: James Gowans <jgowans@amazon.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20241024095956.3668818-1-roypat@amazon.co.uk
Signed-off-by: Sean Christopherson <seanjc@google.com>
