On SM8350 platform the PCIe PIPE clocks require additional handling to
function correctly. They are to be switched to the tcxo source before
turning PCIe GDSCs off and should be switched to PHY PIPE source once
they are working. Switch PCIe PHY clocks to use clk_regmap_phy_mux_ops,
which provide support for this dance.
Fixes: 44c20c9ed3 ("clk: qcom: gcc: Add clock driver for SM8350")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230412134829.3686467-1-dmitry.baryshkov@linaro.org
The qdsp6ss memory region is being shared by ADSP remoteproc device and
lpasscc clock device, hence causing memory conflict.
To avoid this, when qdsp6ss clocks are being enabled in remoteproc driver,
skip qdsp6ss clock registration if "qcom,adsp-pil-mode" is enabled and
also assign max_register value.
Fixes: 4ab43d1711 ("clk: qcom: Add lpass clock controller driver for SC7280")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407092255.119690-3-quic_mohs@quicinc.com
The USB controller on msm8998 doesn't retain its state when the system
goes into low power state and the GDSCs are turned off.
This can be observed by the USB connection not coming back alive after
putting the device into suspend, essentially breaking USB.
Work around this by updating the .pwrsts for the USB GDSCs so they only
transition to retention state in low power.
This change should be reverted when a proper suspend sequence is
implemented in the USB drivers.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230307123159.3797551-3-konrad.dybcio@linaro.org
The USB controller on MSM8996 doesn't retain its state when the system
goes into low power state and the GDSCs are turned off.
This can be observed by the USB connection not coming back alive after
putting the device into suspend, essentially breaking USB.
Work around this by updating the .pwrsts for the USB GDSCs so they only
transition to retention state in low power.
This change should be reverted when a proper suspend sequence is
implemented in the USB drivers.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230307123159.3797551-2-konrad.dybcio@linaro.org
The USB controller on sm6375 doesn't retain its state when the system
goes into low power state and the GDSCs are turned off.
This can be observed by the USB connection not coming back alive after
putting the device into suspend, essentially breaking USB.
Work around this by updating the .pwrsts for the USB GDSCs so they only
transition to retention state in low power.
This change should be reverted when a proper suspend sequence is
implemented in the USB drivers.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230307123159.3797551-1-konrad.dybcio@linaro.org
Clock framework disables the GPLL4 source since there are no active users
for this source currently. Some of the clocks initialized by the
bootloaders uses the GPLL4 as the source. Due to this, when the GPLL4 is
disabled by the clock framework, system is going for the reboot.
To avoid this, mark the GPLL4 as ignore unused so that clock framework
doesn't disable it. Once the users of this source is enabled, we can get
rid of this flag.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230307062232.4889-6-quic_kathirav@quicinc.com
gcc with W=1 reports these errors
drivers/clk/qcom/gpucc-sm6375.c:145:37: error:
‘gpucc_parent_data_2’ defined but not used [-Werror=unused-const-variable=]
145 | static const struct clk_parent_data gpucc_parent_data_2[] = {
| ^~~~~~~~~~~~~~~~~~~
drivers/clk/qcom/gpucc-sm6375.c:139:32: error:
‘gpucc_parent_map_2’ defined but not used [-Werror=unused-const-variable=]
139 | static const struct parent_map gpucc_parent_map_2[] = {
| ^~~~~~~~~~~~~~~~~~
These variables are not used, so remove them.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230315155630.1740065-1-trix@redhat.com
.determine_rate is meant to replace .round_rate. The former comes with a
benefit which is especially relevant on 32-bit systems: since
.determine_rate uses an "unsigned long" (compared to a "signed long"
which is used by .round_rate) the maximum value on 32-bit systems
increases from 2^31 (or approx. 2.14GHz) to 2^32 (or approx. 4.29GHz).
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Tested-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230212-clk-qcom-determine_rate-v1-2-b4e447d4926e@z3ntu.xyz
.determine_rate is meant to replace .round_rate. The former comes with a
benefit which is especially relevant on 32-bit systems: since
.determine_rate uses an "unsigned long" (compared to a "signed long"
which is used by .round_rate) the maximum value on 32-bit systems
increases from 2^31 (or approx. 2.14GHz) to 2^32 (or approx. 4.29GHz).
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Tested-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230212-clk-qcom-determine_rate-v1-1-b4e447d4926e@z3ntu.xyz
HLOS-controlled branch clocks on non-ancient Qualcomm platforms
feature SLEEP and WAKE fields which can be written to to configure
how long the clock hardware should wait internally before being
(un)gated. Some very sensitive clocks need to have these values
programmed to prevent putting the hardware in a not-exactly-good
state. Add definitions of these fields and introduce helpers for
setting them inside clock drivers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208091340.124641-3-konrad.dybcio@linaro.org
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312161512.2715500-23-u.kleine-koenig@pengutronix.de
Revert the postponement of clk_disable_unused() for clock providers that
implement sync_state, and the change to drivers implementing this, until
agreement on the implementation has been reached.
This reverts:
29e31415e1 ("clk: qcom: Remove need for clk_ignore_unused on sc8280xp")
99c0f7d35c ("clk: qcom: sdm845: Use generic clk_sync_state_disable_unused callback")
26b36df751 ("clk: Add generic sync_state callback for disabling unused clocks")
Requested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a simple driver handling the APCS clocks on MSM8996. For now it
supports just a single aux clock, linking GPLL0 to CPU and CBF clocks.
Note, there is little sense in registering sys_apcs_aux as a child of
gpll0. The PLL is always-on. And listing the gpll0 as a property of the
apcs would delay its probing until the GCC has been probed (while we
would like for the apcs to be probed as early as possible).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[bjorn: Fixed spelling of register, per Stephen's feedback]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230126230319.3977109-8-dmitry.baryshkov@linaro.org
