As the updated MIDI 2.0 spec has been published freshly, this is a
catch up to add the support for new specs, especially UMP v1.1
features, on Linux kernel.
The new UMP v1.1 introduced the concept of Function Blocks (FB), which
is a kind of superset of USB MIDI 2.0 Group Terminal Blocks (GTB).
The patch set adds the support for FB as the primary information
source while keeping the parse of GTB as fallback. Also UMP v1.1
supports the groupless messages, the protocol switch, static FBs, and
other new fundamental features, and those are supported as well.
Link: https://www.midi.org/midi-articles/details-about-midi-2-0-midi-ci-profiles-and-property-exchange
Link: https://lore.kernel.org/r/20230612081054.17200-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
UMP v1.1 spec allows to inform whether the function blocks are static
and not dynamically updated. Add a new flag bit to
snd_ump_endpoint_info to reflect that attribute, too.
The flag is set when a USB MIDI device is still in the old MIDI 2.0
without UMP 1.1 support. Then the driver falls back to GTBs, and they
are supposed to be static-only.
Link: https://lore.kernel.org/r/20230612081054.17200-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The UMP Utility and Stream messages are "groupless", i.e. an incoming
groupless packet should be sent only to the UMP EP port, and the event
with the groupless message is sent to UMP EP as is without the group
translation per port.
Also, the former reserved bit 0 for the client group filter is now
used for groupless events. When the bit 0 is set, the groupless
events are filtered out and skipped.
Link: https://lore.kernel.org/r/20230612081054.17200-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a few more fields to snd_ump_endpoint_info and snd_ump_block_info
that are added in the new v1.1 spec. Those are filled by the UMP Stream
messages.
The rawmidi protocol version is bumped to 2.0.4 to indicate those
updates.
Also, update the proc outputs to show the newly introduced fields.
Link: https://lore.kernel.org/r/20230612081054.17200-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a (largish) patch set for adding the support of MIDI 2.0
functionality, mainly targeted for USB devices. MIDI 2.0 is a
complete overhaul of the 40-years old MIDI 1.0. Unlike MIDI 1.0 byte
stream, MIDI 2.0 uses packets in 32bit words for Universal MIDI Packet
(UMP) protocol. It supports both MIDI 1.0 commands for compatibility
and the extended MIDI 2.0 commands for higher resolutions and more
functions.
For supporting the UMP, the patch set extends the existing ALSA
rawmidi and sequencer interfaces, and adds the USB MIDI 2.0 support to
the standard USB-audio driver.
The rawmidi for UMP has a different device name (/dev/snd/umpC*D*) and
it reads/writes UMP packet data in 32bit CPU-native endianness. For
the old MIDI 1.0 applications, the legacy rawmidi interface is
provided, too.
As default, USB-audio driver will take the alternate setting for MIDI
2.0 interface, and the compatibility with MIDI 1.0 is provided via the
rawmidi common layer. However, user may let the driver falling back
to the old MIDI 1.0 interface by a module option, too.
A UMP-capable rawmidi device can create the corresponding ALSA
sequencer client(s) to support the UMP Endpoint and UMP Group
connections. As a nature of ALSA sequencer, arbitrary connections
between clients/ports are allowed, and the ALSA sequencer core
performs the automatic conversions for the connections between a new
UMP sequencer client and a legacy MIDI 1.0 sequencer client. It
allows the existing application to use MIDI 2.0 devices without
changes.
The MIDI-CI, which is another major extension in MIDI 2.0, isn't
covered by this patch set. It would be implemented rather in
user-space.
Roughly speaking, the first half of this patch set is for extending
the rawmidi and USB-audio, and the second half is for extending the
ALSA sequencer interface.
The patch set is based on 6.4-rc2 kernel, but all patches can be
cleanly applicable on 6.2 and 6.3 kernels, too (while 6.1 and older
kernels would need minor adjustment for uapi header changes).
The updates for alsa-lib and alsa-utils will follow shortly later.
The author thanks members of MIDI Association OS/API Working Group,
especially Andrew Mee, for great helps for the initial design and
debugging / testing the drivers.
Link: https://lore.kernel.org/r/20230523075358.9672-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a new filter bitmap for UMP groups for reducing the unnecessary
read/write when the client is connected to UMP EP seq port.
The new group_filter field contains the bitmap for the groups, i.e.
when the bit is set, the corresponding group is filtered out and
the messages to that group won't be delivered.
The filter bitmap consists of each bit of 1-based UMP Group number.
The bit 0 is reserved for the future use.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-37-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add new ioctls for sequencer clients to query and set the UMP endpoint
and block information.
As a sequencer client corresponds to a UMP Endpoint, one UMP Endpoint
information can be assigned at most to a single sequencer client while
multiple UMP block infos can be assigned by passing the type with the
offset of block id (i.e. type = block_id + 1).
For the kernel client, only SNDRV_SEQ_IOCTL_GET_CLIENT_UMP_INFO is
allowed.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-35-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch introduces a new ALSA sequencer client for the kernel UMP
object, snd-seq-ump-client. It's a UMP version of snd-seq-midi
driver, while this driver creates a sequencer client per UMP endpoint
which contains (fixed) 16 ports.
The UMP rawmidi device is opened in APPEND mode for output, so that
multiple sequencer clients can share the same UMP endpoint, as well as
the legacy UMP rawmidi devices that are opened in APPEND mode, too.
For input, on the other hand, the incoming data is processed on the
fly in the dedicated hook, hence it doesn't open a rawmidi device.
The UMP packet group is updated upon delivery depending on the target
sequencer port (which corresponds to the actual UMP group).
Each sequencer port sets a new port type bit,
SNDRV_SEQ_PORT_TYPE_MIDI_UMP, in addition to the other standard
types for MIDI.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-33-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A sequencer client like seq_dummy rather doesn't want to convert UMP
events but receives / sends as is. Add a new event filter flag to
suppress the automatic UMP conversion and applies accordingly.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-32-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add yet more new filed "ump_group" to snd_seq_port_info for specifying
the associated UMP Group number for each sequencer port. This will be
referred in the upcoming automatic UMP conversion in sequencer core.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-30-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a new field "direction" to snd_seq_port_info for allowing a client
to tell the expected direction of the port access. A port might still
allow subscriptions for read/write (e.g. for MIDI-CI) even if the
primary usage of the port is a single direction (either input or
output only). This new "direction" field can help to indicate such
cases.
When the direction is unspecified at creating a port and the port has
either read or write capability, the corresponding direction bits are
set automatically as default.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-29-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is an extension to ALSA sequencer infrastructure to support the
MIDI 2.0 UMP Endpoint port. It's a "catch-all" port that is supposed
to be present for each UMP Endpoint. When this port is read via
subscription, it sends any events from all ports (UMP Groups) found in
the same client.
A UMP Endpoint port can be created with the new capability bit
SNDRV_SEQ_PORT_CAP_UMP_ENDPOINT. Although the port assignment isn't
strictly defined, it should be the port number 0.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-28-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This extends the ALSA sequencer port capability bit to indicate the
"inactive" flag. When this flag is set, the port is essentially
invisible, and doesn't appear in the port query ioctls, while the
direct access and the connection to this port are still allowed. The
active/inactive state can be flipped dynamically, so that it can be
visible at any time later.
This feature is introduced basically for UMP; some UMP Groups in a UMP
Block may be unassigned, hence those are practically invisible. On
ALSA sequencer, the corresponding sequencer ports will get this new
"inactive" flag to indicate the invisible state.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-27-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Starting from this commit, we add the basic support of UMP (Universal
MIDI Packet) events on ALSA sequencer infrastructure. The biggest
change here is that, for transferring UMP packets that are up to 128
bits, we extend the data payload of ALSA sequencer event record when
the client is declared to support for the new UMP events.
A new event flag bit, SNDRV_SEQ_EVENT_UMP, is defined and it shall be
set for the UMP packet events that have the larger payload of 128
bits, defined as struct snd_seq_ump_event.
For controlling the UMP feature enablement in kernel, a new Kconfig,
CONFIG_SND_SEQ_UMP is introduced. The extended event for UMP is
available only when this Kconfig item is set. Similarly, the size of
the internal snd_seq_event_cell also increases (in 4 bytes) when the
Kconfig item is set. (But the size increase is effective only for
32bit architectures; 64bit archs already have padding there.)
Overall, when CONFIG_SND_SEQ_UMP isn't set, there is no change in the
event and cell, keeping the old sizes.
For applications that want to access the UMP packets, first of all, a
sequencer client has to declare the user-protocol to match with the
latest one via the new SNDRV_SEQ_IOCTL_USER_PVERSION; otherwise it's
treated as if a legacy client without UMP support.
Then the client can switch to the new UMP mode (MIDI 1.0 or MIDI 2.0)
with a new field, midi_version, in snd_seq_client_info. When switched
to UMP mode (midi_version = 1 or 2), the client can write the UMP
events with SNDRV_SEQ_EVENT_UMP flag. For reads, the alignment size
is changed from snd_seq_event (28 bytes) to snd_seq_ump_event (32
bytes). When a UMP sequencer event is delivered to a legacy sequencer
client, it's ignored or handled as an error.
Conceptually, ALSA sequencer client and port correspond to the UMP
Endpoint and Group, respectively; each client may have multiple ports
and each port has the fixed number (16) of channels, total up to 256
channels.
As of this commit, ALSA sequencer core just sends and receives the UMP
events as-is from/to clients. The automatic conversions between the
legacy events and the new UMP events will be implemented in a later
patch.
Along with this commit, bump the sequencer protocol version to 1.0.3.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-26-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For the future extension of ALSA sequencer ABI, introduce a new ioctl
SNDRV_SEQ_IOCTL_USER_PVERSION. This is similar like the ioctls used
in PCM and other interfaces, for an application to specify its
supporting ABI version.
The use of this ioctl will be mandatory for the upcoming UMP support.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-25-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It'd be convenient to have ioctls to inquiry the UMP Endpoint and UMP
Block information directly via the control API without opening the
rawmidi interface, just like SNDRV_CTL_IOCTL_RAWMIDI_INFO.
This patch extends the rawmidi ioctl handler to support those; new
ioctls, SNDRV_CTL_IOCTL_UMP_ENDPOINT_INFO and
SNDRV_CTL_IOCTL_UMP_BLOCK_INFO, return the snd_ump_endpoint and
snd_ump_block data that is specified by the device field,
respectively.
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Applications may look for rawmidi devices with the ioctl
SNDRV_CTL_IOCTL_RAWMIDI_NEXT_DEVICE. Returning a UMP device from this
ioctl may confuse the existing applications that support only the
legacy rawmidi.
This patch changes the code to skip the UMP devices from the lookup
for avoiding the confusion, and introduces a new ioctl to look for the
UMP devices instead.
Along with this change, bump the CTL protocol version to 2.0.9.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the support helpers for UMP (Universal MIDI Packet) in
ALSA core.
The basic design is that a rawmidi instance is assigned to each UMP
Endpoint. A UMP Endpoint provides a UMP stream, typically
bidirectional (but can be also uni-directional, too), which may hold
up to 16 UMP Groups, where each UMP (input/output) Group corresponds
to the traditional MIDI I/O Endpoint.
Additionally, the ALSA UMP abstraction provides the multiple UMP
Blocks that can be assigned to each UMP Endpoint. A UMP Block is a
metadata to hold the UMP Group clusters, and can represent the
functions assigned to each UMP Group. A typical implementation of UMP
Block is the Group Terminal Blocks of USB MIDI 2.0 specification.
For distinguishing from the legacy byte-stream MIDI device, a new
device "umpC*D*" will be created, instead of the standard (MIDI 1.0)
devices "midiC*D*". The UMP instance can be identified by the new
rawmidi info bit SNDRV_RAWMIDI_INFO_UMP, too.
A UMP rawmidi device reads/writes only in 4-bytes words alignment,
stored in CPU native endianness.
The transmit and receive functions take care of the input/out data
alignment, and may return zero or aligned size, and the params ioctl
may return -EINVAL when the given input/output buffer size isn't
aligned.
A few new UMP-specific ioctls are added for obtaining the new UMP
endpoint and block information.
As of this commit, no ALSA sequencer instance is attached to UMP
devices yet. They will be supported by later patches.
Along with those changes, the protocol version for rawmidi is bumped
to 2.0.3.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fractional multiplication with the maximal value 2^31-1 causes some tiny
distortion. Instead, we want to multiply with the full 2^31. The catch
is of course that this cannot be represented in the DSP's signed 32 bit
registers.
One way to deal with this is to encode 1.0 as a negative number and
special-case it. As a matter of fact, the SbLive! code path already
contained such code, though the controls never actually exercised it.
A more efficient approach is to use negative values, which actually
extend to -2^31. Accordingly, for all the volume adjustments we now use
the MAC1 instruction which negates the X operand.
The range of the controls in highres mode is extended downwards, so -1
is the new zero/mute. At maximal excursion, real zero is not mute any
more, but I don't think anyone will notice this behavior change. ;-)
That also required making the min/max/values in the control structs
signed. This technically changes the user space interface, but it seems
implausible that someone would notice - the numbers were actually
treated as if they were signed anyway (and in the actual mixer iface
they _are_). And without this change, the min value didn't even make
sense in the first place (and no-one noticed, because it was always 0).
Tested-by: Jonathan Dowland <jon@dow.land>
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230514170323.3408834-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduce SNDRV_PCM_INFO_PERFECT_DRAIN and SNDRV_PCM_HW_PARAMS_NO_DRAIN_SILENCE
flags to fully control the filling of the silence samples in the drain ioctl.
Actually, the configurable silencing is going to be implemented in the user
space [1], but drivers (hardware) may not require this operation. Those flags
do the bidirectional setup for this operation:
1) driver may notify the presence of the perfect drain
2) user space may not require the filling of the silence samples to inhibit clicks
If we decide to move this operation to the kernel space in future, the
SNDRV_PCM_INFO_PERFECT_DRAIN flag may handle this situation without
double "silence" processing (user + kernel space).
The ALSA API should be universal, so forcing the behaviour (modifying of
the ring buffer with any samples) for the drain operation is not ideal.
[1] https://lore.kernel.org/alsa-devel/20230502115010.986325-1-perex@perex.cz/
[ fixed a typo in comment by tiwai ]
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230502115536.986900-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----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=gAYf
-----END PGP SIGNATURE-----
Merge tag 'for-6.4/block-2023-05-06' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- MD pull request via Song:
- Improve raid5 sequential IO performance on spinning disks, which
fixes a regression since v6.0 (Jan Kara)
- Fix bitmap offset types, which fixes an issue introduced in this
merge window (Jonathan Derrick)
- Cleanup of hweight type used for cgroup writeback (Maxim)
- Fix a regression with the "has_submit_bio" changes across partitions
(Ming)
- Cleanup of QUEUE_FLAG_ADD_RANDOM clearing.
We used to set this flag on queues non blk-mq queues, and hence some
drivers clear it unconditionally. Since all of these have since been
converted to true blk-mq drivers, drop the useless clear as the bit
is not set (Chaitanya)
- Fix the flags being set in a bio for a flush for drbd (Christoph)
- Cleanup and deduplication of the code handling setting block device
capacity (Damien)
- Fix for ublk handling IO timeouts (Ming)
- Fix for a regression in blk-cgroup teardown (Tao)
- NBD documentation and code fixes (Eric)
- Convert blk-integrity to using device_attributes rather than a second
kobject to manage lifetimes (Thomas)
* tag 'for-6.4/block-2023-05-06' of git://git.kernel.dk/linux:
ublk: add timeout handler
drbd: correctly submit flush bio on barrier
mailmap: add mailmap entries for Jens Axboe
block: Skip destroyed blkg when restart in blkg_destroy_all()
writeback: fix call of incorrect macro
md: Fix bitmap offset type in sb writer
md/raid5: Improve performance for sequential IO
docs nbd: userspace NBD now favors github over sourceforge
block nbd: use req.cookie instead of req.handle
uapi nbd: add cookie alias to handle
uapi nbd: improve doc links to userspace spec
blk-integrity: register sysfs attributes on struct device
blk-integrity: convert to struct device_attribute
blk-integrity: use sysfs_emit
block/drivers: remove dead clear of random flag
block: sync part's ->bd_has_submit_bio with disk's
block: Cleanup set_capacity()/bdev_set_nr_sectors()
New support:
- Apple admac t8112 device support
- StarFive JH7110 DMA controller
Updates:
- Big pile of idxd updates to support IAA 2.0 device capabilities, DSA
2.0 Event Log and completion record faulting features and new DSA
operations
- at_xdmac supend & resume updates and driver code cleanup
- k3-udma supend & resume support
- k3-psil thread support for J784s4
-----BEGIN PGP SIGNATURE-----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=Vqrw
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support:
- Apple admac t8112 device support
- StarFive JH7110 DMA controller
Updates:
- Big pile of idxd updates to support IAA 2.0 device capabilities,
DSA 2.0 Event Log and completion record faulting features and
new DSA operations
- at_xdmac supend & resume updates and driver code cleanup
- k3-udma supend & resume support
- k3-psil thread support for J784s4"
* tag 'dmaengine-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (57 commits)
dmaengine: idxd: add per wq PRS disable
dmaengine: idxd: add pid to exported sysfs attribute for opened file
dmaengine: idxd: expose fault counters to sysfs
dmaengine: idxd: add a device to represent the file opened
dmaengine: idxd: add per file user counters for completion record faults
dmaengine: idxd: process batch descriptor completion record faults
dmaengine: idxd: add descs_completed field for completion record
dmaengine: idxd: process user page faults for completion record
dmaengine: idxd: add idxd_copy_cr() to copy user completion record during page fault handling
dmaengine: idxd: create kmem cache for event log fault items
dmaengine: idxd: add per DSA wq workqueue for processing cr faults
dmanegine: idxd: add debugfs for event log dump
dmaengine: idxd: add interrupt handling for event log
dmaengine: idxd: setup event log configuration
dmaengine: idxd: add event log size sysfs attribute
dmaengine: idxd: make misc interrupt one shot
dt-bindings: dma: snps,dw-axi-dmac: constrain the items of resets for JH7110 dma
dt-bindings: dma: Drop unneeded quotes
dmaengine: at_xdmac: align declaration of ret with the rest of variables
dmaengine: at_xdmac: add a warning message regarding for unpaused channels
...
* More phys_to_virt conversions
* Improvement of AP management for VSIE (nested virtualization)
ARM64:
* Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
* New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features
being moved to VMMs rather than be implemented in the kernel.
* Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one.
This last part allows the NV timer code to be implemented on
top.
* A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
* The usual selftest fixes and improvements.
KVM x86 changes for 6.4:
* Optimize CR0.WP toggling by avoiding an MMU reload when TDP is enabled,
and by giving the guest control of CR0.WP when EPT is enabled on VMX
(VMX-only because SVM doesn't support per-bit controls)
* Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long" return
as a bool
* Move AMD_PSFD to cpufeatures.h and purge KVM's definition
* Avoid unnecessary writes+flushes when the guest is only adding new PTEs
* Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s optimizations
when emulating invalidations
* Clean up the range-based flushing APIs
* Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a single
A/D bit using a LOCK AND instead of XCHG, and skip all of the "handle
changed SPTE" overhead associated with writing the entire entry
* Track the number of "tail" entries in a pte_list_desc to avoid having
to walk (potentially) all descriptors during insertion and deletion,
which gets quite expensive if the guest is spamming fork()
* Disallow virtualizing legacy LBRs if architectural LBRs are available,
the two are mutually exclusive in hardware
* Disallow writes to immutable feature MSRs (notably PERF_CAPABILITIES)
after KVM_RUN, similar to CPUID features
* Overhaul the vmx_pmu_caps selftest to better validate PERF_CAPABILITIES
* Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
x86 AMD:
* Add support for virtual NMIs
* Fixes for edge cases related to virtual interrupts
x86 Intel:
* Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if XTILE_DATA is
not being reported due to userspace not opting in via prctl()
* Fix a bug in emulation of ENCLS in compatibility mode
* Allow emulation of NOP and PAUSE for L2
* AMX selftests improvements
* Misc cleanups
MIPS:
* Constify MIPS's internal callbacks (a leftover from the hardware enabling
rework that landed in 6.3)
Generic:
* Drop unnecessary casts from "void *" throughout kvm_main.c
* Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the struct
size by 8 bytes on 64-bit kernels by utilizing a padding hole
Documentation:
* Fix goof introduced by the conversion to rST
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRNExkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNyjwf+MkzDael9y9AsOZoqhEZ5OsfQYJ32
Im5ZVYsPRU2K5TuoWql6meIihgclCj1iIU32qYHa2F1WYt2rZ72rJp+HoY8b+TaI
WvF0pvNtqQyg3iEKUBKPA4xQ6mj7RpQBw86qqiCHmlfNt0zxluEGEPxH8xrWcfhC
huDQ+NUOdU7fmJ3rqGitCvkUbCuZNkw3aNPR8dhU8RAWrwRzP2hBOmdxIeo81WWY
XMEpJSijbGpXL9CvM0Jz9nOuMJwZwCCBGxg1vSQq0xTfLySNMxzvWZC2GFaBjucb
j0UOQ7yE0drIZDVhd3sdNslubXXU6FcSEzacGQb9aigMUon3Tem9SHi7Kw==
=S2Hq
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"s390:
- More phys_to_virt conversions
- Improvement of AP management for VSIE (nested virtualization)
ARM64:
- Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
- New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features being
moved to VMMs rather than be implemented in the kernel.
- Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one. This
last part allows the NV timer code to be implemented on top.
- A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
- The usual selftest fixes and improvements.
x86:
- Optimize CR0.WP toggling by avoiding an MMU reload when TDP is
enabled, and by giving the guest control of CR0.WP when EPT is
enabled on VMX (VMX-only because SVM doesn't support per-bit
controls)
- Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long"
return as a bool
- Move AMD_PSFD to cpufeatures.h and purge KVM's definition
- Avoid unnecessary writes+flushes when the guest is only adding new
PTEs
- Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s
optimizations when emulating invalidations
- Clean up the range-based flushing APIs
- Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a
single A/D bit using a LOCK AND instead of XCHG, and skip all of
the "handle changed SPTE" overhead associated with writing the
entire entry
- Track the number of "tail" entries in a pte_list_desc to avoid
having to walk (potentially) all descriptors during insertion and
deletion, which gets quite expensive if the guest is spamming
fork()
- Disallow virtualizing legacy LBRs if architectural LBRs are
available, the two are mutually exclusive in hardware
- Disallow writes to immutable feature MSRs (notably
PERF_CAPABILITIES) after KVM_RUN, similar to CPUID features
- Overhaul the vmx_pmu_caps selftest to better validate
PERF_CAPABILITIES
- Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
- AMD SVM:
- Add support for virtual NMIs
- Fixes for edge cases related to virtual interrupts
- Intel AMX:
- Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if
XTILE_DATA is not being reported due to userspace not opting in
via prctl()
- Fix a bug in emulation of ENCLS in compatibility mode
- Allow emulation of NOP and PAUSE for L2
- AMX selftests improvements
- Misc cleanups
MIPS:
- Constify MIPS's internal callbacks (a leftover from the hardware
enabling rework that landed in 6.3)
Generic:
- Drop unnecessary casts from "void *" throughout kvm_main.c
- Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the
struct size by 8 bytes on 64-bit kernels by utilizing a padding
hole
Documentation:
- Fix goof introduced by the conversion to rST"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (211 commits)
KVM: s390: pci: fix virtual-physical confusion on module unload/load
KVM: s390: vsie: clarifications on setting the APCB
KVM: s390: interrupt: fix virtual-physical confusion for next alert GISA
KVM: arm64: Have kvm_psci_vcpu_on() use WRITE_ONCE() to update mp_state
KVM: arm64: Acquire mp_state_lock in kvm_arch_vcpu_ioctl_vcpu_init()
KVM: selftests: Test the PMU event "Instructions retired"
KVM: selftests: Copy full counter values from guest in PMU event filter test
KVM: selftests: Use error codes to signal errors in PMU event filter test
KVM: selftests: Print detailed info in PMU event filter asserts
KVM: selftests: Add helpers for PMC asserts in PMU event filter test
KVM: selftests: Add a common helper for the PMU event filter guest code
KVM: selftests: Fix spelling mistake "perrmited" -> "permitted"
KVM: arm64: vhe: Drop extra isb() on guest exit
KVM: arm64: vhe: Synchronise with page table walker on MMU update
KVM: arm64: pkvm: Document the side effects of kvm_flush_dcache_to_poc()
KVM: arm64: nvhe: Synchronise with page table walker on TLBI
KVM: arm64: Handle 32bit CNTPCTSS traps
KVM: arm64: nvhe: Synchronise with page table walker on vcpu run
KVM: arm64: vgic: Don't acquire its_lock before config_lock
KVM: selftests: Add test to verify KVM's supported XCR0
...
- Refactor the DOE infrastructure (Data Object Exchange PCI-config-cycle
mailbox) to be a facility of the PCI core rather than the CXL core.
This is foundational for upcoming support for PCI device-attestation and
PCIe / CXL link encryption.
- Add support for retrieving and injecting poison for CXL memory
expanders. This enabling uses trace-events to convey CXL media error
records to user tooling. It includes translation of device-local
addresses (DPA) to system physical addresses (SPA) and their
corresponding CXL region.
- Fixes for decoder enumeration that missed v6.3-final
- Miscellaneous fixups
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZE2nNwAKCRDfioYZHlFs
Z5c2AQCTWebok6CD+HN01xnIx+CBWAUQe0QIGR40dT2P6/WGEgEA8wMae0w/FDlc
lQDvSoIyPvy1hGO7Ppb0K2AT6jrQAgU=
=blcC
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull compute express link updates from Dan Williams:
"DOE support is promoted from drivers/cxl/ to drivers/pci/ with Bjorn's
blessing, and the CXL core continues to mature its media management
capabilities with support for listing and injecting media errors. Some
late fixes that missed v6.3-final are also included:
- Refactor the DOE infrastructure (Data Object Exchange
PCI-config-cycle mailbox) to be a facility of the PCI core rather
than the CXL core.
This is foundational for upcoming support for PCI
device-attestation and PCIe / CXL link encryption.
- Add support for retrieving and injecting poison for CXL memory
expanders.
This enabling uses trace-events to convey CXL media error records
to user tooling. It includes translation of device-local addresses
(DPA) to system physical addresses (SPA) and their corresponding
CXL region.
- Fixes for decoder enumeration that missed v6.3-final
- Miscellaneous fixups"
* tag 'cxl-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (38 commits)
cxl/test: Add mock test for set_timestamp
cxl/mbox: Update CMD_RC_TABLE
tools/testing/cxl: Require CONFIG_DEBUG_FS
tools/testing/cxl: Add a sysfs attr to test poison inject limits
tools/testing/cxl: Use injected poison for get poison list
tools/testing/cxl: Mock the Clear Poison mailbox command
tools/testing/cxl: Mock the Inject Poison mailbox command
cxl/mem: Add debugfs attributes for poison inject and clear
cxl/memdev: Trace inject and clear poison as cxl_poison events
cxl/memdev: Warn of poison inject or clear to a mapped region
cxl/memdev: Add support for the Clear Poison mailbox command
cxl/memdev: Add support for the Inject Poison mailbox command
tools/testing/cxl: Mock support for Get Poison List
cxl/trace: Add an HPA to cxl_poison trace events
cxl/region: Provide region info to the cxl_poison trace event
cxl/memdev: Add trigger_poison_list sysfs attribute
cxl/trace: Add TRACE support for CXL media-error records
cxl/mbox: Add GET_POISON_LIST mailbox command
cxl/mbox: Initialize the poison state
cxl/mbox: Restrict poison cmds to debugfs cxl_raw_allow_all
...
Usual wide collection of unrelated items in drivers:
- Driver bug fixes and treewide cleanups in hfi1, siw, qib, mlx5, rxe,
usnic, usnic, bnxt_re, ocrdma, iser
* Unnecessary NULL checks
* kmap obsolescence
* pci_enable_pcie_error_reporting() obsolescence
* Unused variables and macros
* trace event related warnings
* casting warnings
- Code cleanups for irdm and erdma
- EFA reporting of 128 byte PCIe TLP support
- mlx5 more agressively uses the out of order HW feature
- Big rework of how state machines and tasks work in rxe
- Fix a syzkaller found crash netdev refcount leak in siw
- bnxt_re revises their HW description header
- Congestion control for bnxt_re
- Use mmu_notifiers more safely in hfi1
- mlx5 gets better support for PCIe relaxed ordering inside VMs
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZEva5wAKCRCFwuHvBreF
YZFmAQC9T3b/XQ3bRknYciuzbatC98o9xB0FTqmEFYGj+Y2lVAD9EEVe3HKfHfi3
t/GxXYB5r22oxg5bgsblZfEdEdTVCg8=
=akMm
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Usual wide collection of unrelated items in drivers:
- Driver bug fixes and treewide cleanups in hfi1, siw, qib, mlx5,
rxe, usnic, usnic, bnxt_re, ocrdma, iser:
- remove unnecessary NULL checks
- kmap obsolescence
- pci_enable_pcie_error_reporting() obsolescence
- unused variables and macros
- trace event related warnings
- casting warnings
- Code cleanups for irdm and erdma
- EFA reporting of 128 byte PCIe TLP support
- mlx5 more agressively uses the out of order HW feature
- Big rework of how state machines and tasks work in rxe
- Fix a syzkaller found crash netdev refcount leak in siw
- bnxt_re revises their HW description header
- Congestion control for bnxt_re
- Use mmu_notifiers more safely in hfi1
- mlx5 gets better support for PCIe relaxed ordering inside VMs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (81 commits)
RDMA/efa: Add rdma write capability to device caps
RDMA/mlx5: Use correct device num_ports when modify DC
RDMA/irdma: Drop spurious WQ_UNBOUND from alloc_ordered_workqueue() call
RDMA/rxe: Fix spinlock recursion deadlock on requester
RDMA/mlx5: Fix flow counter query via DEVX
RDMA/rxe: Protect QP state with qp->state_lock
RDMA/rxe: Move code to check if drained to subroutine
RDMA/rxe: Remove qp->req.state
RDMA/rxe: Remove qp->comp.state
RDMA/rxe: Remove qp->resp.state
RDMA/mlx5: Allow relaxed ordering read in VFs and VMs
net/mlx5: Update relaxed ordering read HCA capabilities
RDMA/mlx5: Check pcie_relaxed_ordering_enabled() in UMR
RDMA/mlx5: Remove pcie_relaxed_ordering_enabled() check for RO write
RDMA: Add ib_virt_dma_to_page()
RDMA/rxe: Fix the error "trying to register non-static key in rxe_cleanup_task"
RDMA/irdma: Slightly optimize irdma_form_ah_cm_frame()
RDMA/rxe: Fix incorrect TASKLET_STATE_SCHED check in rxe_task.c
IB/hfi1: Place struct mmu_rb_handler on cache line start
IB/hfi1: Fix bugs with non-PAGE_SIZE-end multi-iovec user SDMA requests
...
The big ticket item for this release is support for RPC-with-TLS
[RFC 9289] has been added to the Linux NFS server. The goal is to
provide a simple-to-deploy, low-overhead in-transit confidentiality
and peer authentication mechanism. It can supplement NFS Kerberos
and it can protect the use of legacy non-cryptographic user
authentication flavors such as AUTH_SYS. The TLS Record protocol is
handled entirely by kTLS, meaning it can use either software
encryption or offload encryption to smart NICs.
Work continues on improving NFSD's open file cache. Among the many
clean-ups in that area is a patch to convert the rhashtable to use
the list-hashing version of that data structure.
-----BEGIN PGP SIGNATURE-----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=lA2+
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"The big ticket item for this release is that support for RPC-with-TLS
[RFC 9289] has been added to the Linux NFS server.
The goal is to provide a simple-to-deploy, low-overhead in-transit
confidentiality and peer authentication mechanism. It can supplement
NFS Kerberos and it can protect the use of legacy non-cryptographic
user authentication flavors such as AUTH_SYS. The TLS Record protocol
is handled entirely by kTLS, meaning it can use either software
encryption or offload encryption to smart NICs.
Aside from that, work continues on improving NFSD's open file cache.
Among the many clean-ups in that area is a patch to convert the
rhashtable to use the list-hashing version of that data structure"
* tag 'nfsd-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (31 commits)
NFSD: Handle new xprtsec= export option
SUNRPC: Support TLS handshake in the server-side TCP socket code
NFSD: Clean up xattr memory allocation flags
NFSD: Fix problem of COMMIT and NFS4ERR_DELAY in infinite loop
SUNRPC: Clear rq_xid when receiving a new RPC Call
SUNRPC: Recognize control messages in server-side TCP socket code
SUNRPC: Be even lazier about releasing pages
SUNRPC: Convert svc_xprt_release() to the release_pages() API
SUNRPC: Relocate svc_free_res_pages()
nfsd: simplify the delayed disposal list code
SUNRPC: Ignore return value of ->xpo_sendto
SUNRPC: Ensure server-side sockets have a sock->file
NFSD: Watch for rq_pages bounds checking errors in nfsd_splice_actor()
sunrpc: simplify two-level sysctl registration for svcrdma_parm_table
SUNRPC: return proper error from get_expiry()
lockd: add some client-side tracepoints
nfs: move nfs_fhandle_hash to common include file
lockd: server should unlock lock if client rejects the grant
lockd: fix races in client GRANTED_MSG wait logic
lockd: move struct nlm_wait to lockd.h
...
- User events are finally ready!
After lots of collaboration between various parties, we finally locked
down on a stable interface for user events that can also work with user
space only tracing. This is implemented by telling the kernel (or user
space library, but that part is user space only and not part of this
patch set), where the variable is that the application uses to know if
something is listening to the trace. There's also an interface to tell
the kernel about these events, which will show up in the
/sys/kernel/tracing/events/user_events/ directory, where it can be
enabled. When it's enabled, the kernel will update the variable, to tell
the application to start writing to the kernel.
See https://lwn.net/Articles/927595/
- Cleaned up the direct trampolines code to simplify arm64 addition of
direct trampolines. Direct trampolines use the ftrace interface but
instead of jumping to the ftrace trampoline, applications (mostly BPF)
can register their own trampoline for performance reasons.
- Some updates to the fprobe infrastructure. fprobes are more efficient than
kprobes, as it does not need to save all the registers that kprobes on
ftrace do. More work needs to be done before the fprobes will be exposed
as dynamic events.
- More updates to references to the obsolete path of
/sys/kernel/debug/tracing for the new /sys/kernel/tracing path.
- Add a seq_buf_do_printk() helper to seq_bufs, to print a large buffer line
by line instead of all at once. There's users in production kernels that
have a large data dump that originally used printk() directly, but the
data dump was larger than what printk() allowed as a single print.
Using seq_buf() to do the printing fixes that.
- Add /sys/kernel/tracing/touched_functions that shows all functions that
was every traced by ftrace or a direct trampoline. This is used for
debugging issues where a traced function could have caused a crash by
a bpf program or live patching.
- Add a "fields" option that is similar to "raw" but outputs the fields of
the events. It's easier to read by humans.
- Some minor fixes and clean ups.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZEr36xQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quZHAQCzuqnn2S8DsPd3Sy1vKIYaj0uajW5D
Kz1oUJH4F0H7kgEA8XwXkdtfKpOXWc/ZH4LWfL7Orx2wJZJQMV9dVqEPDAE=
=w0Z1
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- User events are finally ready!
After lots of collaboration between various parties, we finally
locked down on a stable interface for user events that can also work
with user space only tracing.
This is implemented by telling the kernel (or user space library, but
that part is user space only and not part of this patch set), where
the variable is that the application uses to know if something is
listening to the trace.
There's also an interface to tell the kernel about these events,
which will show up in the /sys/kernel/tracing/events/user_events/
directory, where it can be enabled.
When it's enabled, the kernel will update the variable, to tell the
application to start writing to the kernel.
See https://lwn.net/Articles/927595/
- Cleaned up the direct trampolines code to simplify arm64 addition of
direct trampolines.
Direct trampolines use the ftrace interface but instead of jumping to
the ftrace trampoline, applications (mostly BPF) can register their
own trampoline for performance reasons.
- Some updates to the fprobe infrastructure. fprobes are more efficient
than kprobes, as it does not need to save all the registers that
kprobes on ftrace do. More work needs to be done before the fprobes
will be exposed as dynamic events.
- More updates to references to the obsolete path of
/sys/kernel/debug/tracing for the new /sys/kernel/tracing path.
- Add a seq_buf_do_printk() helper to seq_bufs, to print a large buffer
line by line instead of all at once.
There are users in production kernels that have a large data dump
that originally used printk() directly, but the data dump was larger
than what printk() allowed as a single print.
Using seq_buf() to do the printing fixes that.
- Add /sys/kernel/tracing/touched_functions that shows all functions
that was every traced by ftrace or a direct trampoline. This is used
for debugging issues where a traced function could have caused a
crash by a bpf program or live patching.
- Add a "fields" option that is similar to "raw" but outputs the fields
of the events. It's easier to read by humans.
- Some minor fixes and clean ups.
* tag 'trace-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (41 commits)
ring-buffer: Sync IRQ works before buffer destruction
tracing: Add missing spaces in trace_print_hex_seq()
ring-buffer: Ensure proper resetting of atomic variables in ring_buffer_reset_online_cpus
recordmcount: Fix memory leaks in the uwrite function
tracing/user_events: Limit max fault-in attempts
tracing/user_events: Prevent same address and bit per process
tracing/user_events: Ensure bit is cleared on unregister
tracing/user_events: Ensure write index cannot be negative
seq_buf: Add seq_buf_do_printk() helper
tracing: Fix print_fields() for __dyn_loc/__rel_loc
tracing/user_events: Set event filter_type from type
ring-buffer: Clearly check null ptr returned by rb_set_head_page()
tracing: Unbreak user events
tracing/user_events: Use print_format_fields() for trace output
tracing/user_events: Align structs with tabs for readability
tracing/user_events: Limit global user_event count
tracing/user_events: Charge event allocs to cgroups
tracing/user_events: Update documentation for ABI
tracing/user_events: Use write ABI in example
tracing/user_events: Add ABI self-test
...
- updates to scripts/gdb from Glenn Washburn
- kexec cleanups from Bjorn Helgaas
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr+6wAKCRDdBJ7gKXxA
jn4NAP4u/hj/kR2dxYehcVLuQqJspCRZZBZlAReFJyHNQO6voAEAk0NN9rtG2+/E
r0G29CJhK+YL0W6mOs8O1yo9J1rZnAM=
=2CUV
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-04-27-16-01' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Mainly singleton patches all over the place.
Series of note are:
- updates to scripts/gdb from Glenn Washburn
- kexec cleanups from Bjorn Helgaas"
* tag 'mm-nonmm-stable-2023-04-27-16-01' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (50 commits)
mailmap: add entries for Paul Mackerras
libgcc: add forward declarations for generic library routines
mailmap: add entry for Oleksandr
ocfs2: reduce ioctl stack usage
fs/proc: add Kthread flag to /proc/$pid/status
ia64: fix an addr to taddr in huge_pte_offset()
checkpatch: introduce proper bindings license check
epoll: rename global epmutex
scripts/gdb: add GDB convenience functions $lx_dentry_name() and $lx_i_dentry()
scripts/gdb: create linux/vfs.py for VFS related GDB helpers
uapi/linux/const.h: prefer ISO-friendly __typeof__
delayacct: track delays from IRQ/SOFTIRQ
scripts/gdb: timerlist: convert int chunks to str
scripts/gdb: print interrupts
scripts/gdb: raise error with reduced debugging information
scripts/gdb: add a Radix Tree Parser
lib/rbtree: use '+' instead of '|' for setting color.
proc/stat: remove arch_idle_time()
checkpatch: check for misuse of the link tags
checkpatch: allow Closes tags with links
...
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page().
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather
than exclusive, and has fixed a bunch of errors which were caused by its
unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr3zQAKCRDdBJ7gKXxA
jlLoAP0fpQBipwFxED0Us4SKQfupV6z4caXNJGPeay7Aj11/kQD/aMRC2uPfgr96
eMG3kwn2pqkB9ST2QpkaRbxA//eMbQY=
=J+Dj
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
The uapi <linux/nbd.h> header declares a 'char handle[8]' per request;
which is overloaded in English (are you referring to "handle" the
verb, such as handling a signal or writing a callback handler, or
"handle" the noun, the value used in a lookup table to correlate a
response back to the request). Many user-space NBD implementations
(both servers and clients) have instead used 'uint64_t cookie' or
similar, as it is easier to directly assign an integer than to futz
around with memcpy. In fact, upstream documentation is now
encouraging this shift in terminology:
https://github.com/NetworkBlockDevice/nbd/commit/ca4392eb2b
Accomplish this by use of an anonymous union to provide the alias for
anyone getting the definition from the uapi; this does not break
existing clients, while exposing the nicer name for those who prefer
it. Note that block/nbd.c still uses the term handle (in fact, it
actually combines a 32-bit cookie and a 32-bit tag into the 64-bit
handle), but that internal usage is not changed by the public uapi,
since no compliant NBD server has any reason to inspect or alter the
64 bits sent over the socket.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20230410180611.1051618-3-eblake@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The uapi <linux/nbd.h> header intentionally documents only the NBD
server features that the kernel module will utilize as a client. But
while it already had one mention of skipped bits due to userspace
extensions, it did not actually direct the reader to the canonical
source to learn about those extensions.
While touching comments, fix an outdated reference that listed only
READ and WRITE as commands.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20230410180611.1051618-2-eblake@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
reduction in interrupt rate in virtio
perf improvement for VDUSE
scalability for vhost-scsi
non power of 2 ring support for packed rings
better management for mlx5 vdpa
suspend for snet
VIRTIO_F_NOTIFICATION_DATA
shared backend with vdpa-sim-blk
user VA support in vdpa-sim
better struct packing for virtio
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmRG+QcPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpMyAIALpq8Z9ljl7ADGLuvt/xeCnIdifo7NXam71s
+algalRplF3QplnMxZ0vH19Z8Gvyl18fkk/l0tHoCrZZgyseYR6DbyZXPv8YIfFh
NSBokhil+ZURH6eNJc2PLcBUF3QIL3rSv7tBq7/++PN3KIqdHIePbyUFLlwqb272
NLkOkHT30QBtncRWJORj/GqDxi/4H1zHDmfMd6xD/1B6IrC3gin205RnLuCa2H65
bP0IE025VrmrRqNGX7nhi7dIFo6SmMPwG5O0YWeEhFHaSOL9PJM/Z9EN4tLhC1v1
Y34fryH9e+MMSgBnCK2ExxTq/pGWsbhPbvisDfDf3M1m1HHfhYI=
=N1SV
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"virtio,vhost,vdpa: features, fixes, and cleanups:
- reduction in interrupt rate in virtio
- perf improvement for VDUSE
- scalability for vhost-scsi
- non power of 2 ring support for packed rings
- better management for mlx5 vdpa
- suspend for snet
- VIRTIO_F_NOTIFICATION_DATA
- shared backend with vdpa-sim-blk
- user VA support in vdpa-sim
- better struct packing for virtio
and fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (52 commits)
vhost_vdpa: fix unmap process in no-batch mode
MAINTAINERS: make me a reviewer of VIRTIO CORE AND NET DRIVERS
tools/virtio: fix build caused by virtio_ring changes
virtio_ring: add a struct device forward declaration
vdpa_sim_blk: support shared backend
vdpa_sim: move buffer allocation in the devices
vdpa/snet: use likely/unlikely macros in hot functions
vdpa/snet: implement kick_vq_with_data callback
virtio-vdpa: add VIRTIO_F_NOTIFICATION_DATA feature support
virtio: add VIRTIO_F_NOTIFICATION_DATA feature support
vdpa/snet: support the suspend vDPA callback
vdpa/snet: support getting and setting VQ state
MAINTAINERS: add vringh.h to Virtio Core and Net Drivers
vringh: address kdoc warnings
vdpa: address kdoc warnings
virtio_ring: don't update event idx on get_buf
vdpa_sim: add support for user VA
vdpa_sim: replace the spinlock with a mutex to protect the state
vdpa_sim: use kthread worker
vdpa_sim: make devices agnostic for work management
...
Enable administrators to require clients to use transport layer
security when accessing particular exports.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Here is the "big" set of char/misc and other driver subsystems for
6.4-rc1.
It's pretty big, but due to the removal of pcmcia drivers, almost breaks
even for number of lines added vs. removed, a nice change.
Included in here are:
- removal of unused PCMCIA drivers (finally!)
- Interconnect driver updates and additions
- Lots of IIO driver updates and additions
- MHI driver updates
- Coresight driver updates
- NVMEM driver updates, which required some OF updates
- W1 driver updates and a new maintainer to manage the subsystem
- FPGA driver updates
- New driver subsystem, CDX, for AMD systems
- lots of other small driver updates and additions
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp5Eg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynSXgCg0kSw3vUYwpsnhAsQkoPw1QVA23sAn2edRCMa
GEkPWjrROueCom7xbLMu
=eR+P
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc drivers updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystems for
6.4-rc1.
It's pretty big, but due to the removal of pcmcia drivers, almost
breaks even for number of lines added vs. removed, a nice change.
Included in here are:
- removal of unused PCMCIA drivers (finally!)
- Interconnect driver updates and additions
- Lots of IIO driver updates and additions
- MHI driver updates
- Coresight driver updates
- NVMEM driver updates, which required some OF updates
- W1 driver updates and a new maintainer to manage the subsystem
- FPGA driver updates
- New driver subsystem, CDX, for AMD systems
- lots of other small driver updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (196 commits)
mcb-lpc: Reallocate memory region to avoid memory overlapping
mcb-pci: Reallocate memory region to avoid memory overlapping
mcb: Return actual parsed size when reading chameleon table
kernel/configs: Drop Android config fragments
virt: acrn: Replace obsolete memalign() with posix_memalign()
spmi: Add a check for remove callback when removing a SPMI driver
spmi: fix W=1 kernel-doc warnings
spmi: mtk-pmif: Drop of_match_ptr for ID table
spmi: pmic-arb: Convert to platform remove callback returning void
spmi: mtk-pmif: Convert to platform remove callback returning void
spmi: hisi-spmi-controller: Convert to platform remove callback returning void
w1: gpio: remove unnecessary ENOMEM messages
w1: omap-hdq: remove unnecessary ENOMEM messages
w1: omap-hdq: add SPDX tag
w1: omap-hdq: allow compile testing
w1: matrox: remove unnecessary ENOMEM messages
w1: matrox: use inline over __inline__
w1: matrox: switch from asm to linux header
w1: ds2482: do not use assignment in if condition
w1: ds2482: drop unnecessary header
...
Here is the big set of tty/serial driver updates for 6.4-rc1.
Nothing major, just lots of tiny, constant, forward development. This
includes:
- obligatory n_gsm updates and feature additions
- 8250_em driver updates
- sh-sci driver updates
- dts cleanups and updates
- general cleanups and improvements by Ilpo and Jiri
- other small serial driver core fixes and driver updates
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEqB7w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylQuwCgwU9bGoihDtFsoFYUra/FKPPoC88Anj6t1a1f
X5HZmADnwrFNNq/jP4vH
=FeNF
-----END PGP SIGNATURE-----
Merge tag 'tty-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty/serial driver updates for 6.4-rc1.
Nothing major, just lots of tiny, constant, forward development. This
includes:
- obligatory n_gsm updates and feature additions
- 8250_em driver updates
- sh-sci driver updates
- dts cleanups and updates
- general cleanups and improvements by Ilpo and Jiri
- other small serial driver core fixes and driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (87 commits)
n_gsm: Use array_index_nospec() with index that comes from userspace
tty: vt: drop checks for undefined VT_SINGLE_DRIVER
tty: vt: distribute EXPORT_SYMBOL()
tty: vt: simplify some cases in tioclinux()
tty: vt: reformat tioclinux()
tty: serial: sh-sci: Fix end of transmission on SCI
tty: serial: sh-sci: Add support for tx end interrupt handling
tty: serial: sh-sci: Fix TE setting on SCI IP
tty: serial: sh-sci: Add RZ/G2L SCIFA DMA rx support
tty: serial: sh-sci: Add RZ/G2L SCIFA DMA tx support
serial: max310x: fix IO data corruption in batched operations
serial: core: Disable uart_start() on uart_remove_one_port()
serial: 8250: Reinit port->pm on port specific driver unbind
serial: 8250: Add missing wakeup event reporting
tty: serial: fsl_lpuart: use UARTMODIR register bits for lpuart32 platform
tty: serial: fsl_lpuart: adjust buffer length to the intended size
serial: fix TIOCSRS485 locking
serial: make SiFive serial drivers depend on ARCH_ symbols
tty: synclink_gt: don't allocate and pass dummy flags
tty: serial: simplify qcom_geni_serial_send_chunk_fifo()
...
At this time, it's an interesting mixture of changes for both old and
new stuff. Majority of changes are about ASoC (lots of systematic
changes for converting remove callbacks to void, and cleanups), while
we got the fixes and the enhancements of very old PCI cards, too.
Here are some highlights:
ALSA/ASoC Core:
- Continued effort of more ASoC core cleanups
- Minor improvements for XRUN handling in indirect PCM helpers
- Code refactoring of PCM core code
ASoC:
- Continued feature and simplification work on SOF, including addition
of a no-DSP mode for bringup, HDA MLink and extensions to the IPC4
protocol
- Hibernation support for CS35L45
- More DT binding conversions
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas R-Car
Gen4, Rockchip RK3588 and TI TAS5733
ALSA:
- Lots of works for legacy emu10k1 and ymfpci PCI drivers
- PCM kselftest fixes and enhancements
-----BEGIN PGP SIGNATURE-----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=7XGG
-----END PGP SIGNATURE-----
Merge tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"At this time, it's an interesting mixture of changes for both old and
new stuff. Majority of changes are about ASoC (lots of systematic
changes for converting remove callbacks to void, and cleanups), while
we got the fixes and the enhancements of very old PCI cards, too.
Here are some highlights:
ALSA/ASoC Core:
- Continued effort of more ASoC core cleanups
- Minor improvements for XRUN handling in indirect PCM helpers
- Code refactoring of PCM core code
ASoC:
- Continued feature and simplification work on SOF, including
addition of a no-DSP mode for bringup, HDA MLink and extensions to
the IPC4 protocol
- Hibernation support for CS35L45
- More DT binding conversions
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas
R-Car Gen4, Rockchip RK3588 and TI TAS5733
ALSA:
- Lots of works for legacy emu10k1 and ymfpci PCI drivers
- PCM kselftest fixes and enhancements"
* tag 'sound-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (586 commits)
ALSA: emu10k1: use high-level I/O in set_filterQ()
ALSA: emu10k1: use high-level I/O functions also during init
ALSA: emu10k1: fix error handling in snd_audigy_i2c_volume_put()
ALSA: emu10k1: don't stop DSP in _snd_emu10k1_{,audigy_}init_efx()
ALSA: emu10k1: fix SNDRV_EMU10K1_IOCTL_SINGLE_STEP
ALSA: emu10k1: skip Sound Blaster-specific hacks for E-MU cards
ALSA: emu10k1: fixup DSP defines
ALSA: emu10k1: pull in some register definitions from kX-project
ALSA: emu10k1: remove some bogus defines
ALSA: emu10k1: eliminate some unused defines
ALSA: emu10k1: fix lineup of EMU_HANA_* defines
ALSA: emu10k1: comment updates
ALSA: emu10k1: fix snd_emu1010_fpga_read() input masking for rev2 cards
ALSA: emu10k1: remove unused emu->pcm_playback_efx_substream field
ALSA: emu10k1: remove unused `resume` parameter from snd_emu10k1_init()
ALSA: emu10k1: minor optimizations
ALSA: emu10k1: remove remaining cruft from snd_emu10k1_emu1010_init()
ALSA: emu10k1: remove apparently pointless EMU_HANA_OPTION_CARDS reads
ALSA: emu10k1: remove apparently pointless FPGA reads
ALSA: emu10k1: stop doing weird things with HCFG in snd_emu10k1_emu1010_init()
...
Core
----
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances.
- Reduce compound page head access for zero-copy data transfers.
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible.
- Threaded NAPI improvements, adding defer skb free support and unneeded
softirq avoidance.
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking.
- Add lockless accesses annotation to sk_err[_soft].
- Optimize again the skb struct layout.
- Extends the skb drop reasons to make it usable by multiple
subsystems.
- Better const qualifier awareness for socket casts.
BPF
---
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and variable-sized
accesses.
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward.
- Add more precise memory usage reporting for all BPF map types.
- Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params.
- Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton.
- Bigger batch of BPF verifier improvements to prepare for upcoming BPF
open-coded iterators allowing for less restrictive looping capabilities.
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
programs to NULL-check before passing such pointers into kfunc.
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
local storage maps.
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps.
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree.
- Add BPF verifier support for ST instructions in convert_ctx_access()
which will help new -mcpu=v4 clang flag to start emitting them.
- Add ARM32 USDT support to libbpf.
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations.
Protocols
---------
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address.
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition.
- Add the handshake upcall mechanism, allowing the user-space
to implement generic TLS handshake on kernel's behalf.
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures.
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers.
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction.
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore.
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter
---------
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged.
- Update bridge netfilter and ovs conntrack helpers to handle
IPv6 Jumbo packets properly, i.e. fetch the packet length
from hop-by-hop extension header. This is needed for BIT TCP
support.
- The iptables 32bit compat interface isn't compiled in by default
anymore.
- Move ip(6)tables builtin icmp matches to the udptcp one.
This has the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used.
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device.
Driver API
----------
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time.
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them.
- Allow the page_pool to directly recycle the pages from safely
localized NAPI.
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization.
- Add YNL support for user headers and struct attrs.
- Add partial YNL specification for devlink.
- Add partial YNL specification for ethtool.
- Add tc-mqprio and tc-taprio support for preemptible traffic classes.
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device.
- Add basic LED support for switch/phy.
- Add NAPI documentation, stop relaying on external links.
- Convert dsa_master_ioctl() to netdev notifier. This is a preparatory
work to make the hardware timestamping layer selectable by user
space.
- Add transceiver support and improve the error messages for CAN-FD
controllers.
New hardware / drivers
----------------------
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers
-------
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors.
- add support for configuring max SDU for each Tx queue.
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only
on shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll.
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates.
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices
(e.g. MAC address from efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmRI/mUSHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkgO0QAJGxpuN67YgYV0BIM+/atWKEEexJYG7B
9MMpU4jMO3EW/pUS5t7VRsBLUybLYVPmqCZoHodObDfnu59jiPOegb6SikJv/ZwJ
Zw62PVk5MvDnQjlu4e6kDcGwkplteN08TlgI+a49BUTedpdFitrxHAYGW8f2fRO6
cK2XSld+ZucMoym5vRwf8yWS1BwdxnslPMxDJ+/8ZbWBZv44qAnG2vMB/kIx7ObC
Vel/4m6MzTwVsLYBsRvcwMVbNNlZ9GuhztlTzEbfGA4ZhTadIAMgb5VTWXB84Ws7
Aic5wTdli+q+x6/2cxhbyeoVuB9HHObYmLBAciGg4GNljP5rnQBY3X3+KVZ/x9TI
HQB7CmhxmAZVrO9pLARFV+ECrMTH2/dy3NyrZ7uYQ3WPOXJi8hJZjOTO/eeEGL7C
eTjdz0dZBWIBK2gON/6s4nExXVQUTEF2ZsPi52jTTClKjfe5pz/ddeFQIWaY1DTm
pInEiWPAvd28JyiFmhFNHsuIBCjX/Zqe2JuMfMBeBibDAC09o/OGdKJYUI15AiRf
F46Pdb7use/puqfrYW44kSAfaPYoBiE+hj1RdeQfen35xD9HVE4vdnLNeuhRlFF9
aQfyIRHYQofkumRDr5f8JEY66cl9NiKQ4IVW1xxQfYDNdC6wQqREPG1md7rJVMrJ
vP7ugFnttneg
=ITVa
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
Updates to the usual drivers (megaraid_sas, scsi_debug, lpfc, target,
mpi3mr, hisi_sas, arcmsr). The major core change is the
constification of the host templates (which touches everything) along
with other minor fixups and clean ups.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZEmJACYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishU4FAP0WYhFC
rkbY203/+ErUuwvOKum0VwJKUowCaUD0MBwScAD+Ok/NWobmjdXUBbPUbvVkr+hE
8B/xs9hodX+1fVJcVG0=
=fS/j
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (megaraid_sas, scsi_debug, lpfc, target,
mpi3mr, hisi_sas, arcmsr).
The major core change is the constification of the host templates
(which touches everything) along with other minor fixups and clean
ups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits)
scsi: ufs: mcq: Use pointer arithmetic in ufshcd_send_command()
scsi: ufs: mcq: Annotate ufshcd_inc_sq_tail() appropriately
scsi: cxlflash: s/semahpore/semaphore/
scsi: lpfc: Silence an incorrect device output
scsi: mpi3mr: Use IRQ save variants of spinlock to protect chain frame allocation
scsi: scsi_debug: Fix missing error code in scsi_debug_init()
scsi: hisi_sas: Work around build failure in suspend function
scsi: lpfc: Fix ioremap issues in lpfc_sli4_pci_mem_setup()
scsi: mpt3sas: Fix an issue when driver is being removed
scsi: mpt3sas: Remove HBA BIOS version in the kernel log
scsi: target: core: Fix invalid memory access
scsi: scsi_debug: Drop sdebug_queue
scsi: scsi_debug: Only allow sdebug_max_queue be modified when no shosts
scsi: scsi_debug: Use scsi_host_busy() in delay_store() and ndelay_store()
scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in stop_all_queued()
scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in sdebug_blk_mq_poll()
scsi: scsi_debug: Dynamically allocate sdebug_queued_cmd
scsi: scsi_debug: Use scsi_block_requests() to block queues
scsi: scsi_debug: Protect block_unblock_all_queues() with mutex
scsi: scsi_debug: Change shost list lock to a mutex
...
* Many cleanups of the pata_parport driver and of its protocol modules,
from Ondrej.
* Remove unused code (ata_id_xxx() functions), from Sergey.
* Add Add UniPhier SATA controller DT bindings, from Kunihiko.
* Fix dependencies for the Freescale QorIQ AHCI SATA controller driver,
from Geert.
* DT property handling improvements, from Rob.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZEfg+AAKCRDdoc3SxdoY
dl+WAQDypaM0OuXFqVin9s49pR2UsOE7TKNrlPUsjN2p+gCBNAEA1bFLzuTWVriA
qlzl3/3gU33aeBqrAnxkH7k6gf0q2gY=
=8CO+
-----END PGP SIGNATURE-----
Merge tag 'ata-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata updates from Damien Le Moal:
- Many cleanups of the pata_parport driver and of its protocol modules
(Ondrej)
- Remove unused code (ata_id_xxx() functions) (Sergey)
- Add Add UniPhier SATA controller DT bindings (Kunihiko)
- Fix dependencies for the Freescale QorIQ AHCI SATA controller driver
(Geert)
- DT property handling improvements (Rob)
* tag 'ata-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (57 commits)
ata: pata_parport-bpck6: Declare mode_map as static
ata: pata_parport-bpck6: Remove dependency on 64BIT
ata: pata_parport-bpck6: reduce indents in bpck6_open
ata: pata_parport-bpck6: delete ppc6lnx.c
ata: pata_parport-bpck6: move defines and mode_map to bpck6.c
ata: pata_parport-bpck6: move ppc6_wr_data_byte to bpck6.c and rename
ata: pata_parport-bpck6: move ppc6_rd_data_byte to bpck6.c and rename
ata: pata_parport-bpck6: move ppc6_send_cmd to bpck6.c and rename
ata: pata_parport-bpck6: move ppc6_deselect to bpck6.c and rename
ata: pata_parport-bpck6: merge ppc6_select into bpck6_open
ata: pata_parport-bpck6: move ppc6_open to bpck6.c and rename
ata: pata_parport-bpck6: move ppc6_wr_extout to bpck6.c and rename
ata: pata_parport-bpck6: move ppc6_wait_for_fifo to bpck6.c and rename
ata: pata_parport-bpck6: merge ppc6_wr_data_blk into bpck6_write_block
ata: pata_parport-bpck6: merge ppc6_rd_data_blk into bpck6_read_block
ata: pata_parport-bpck6: merge ppc6_wr_port16_blk into bpck6_write_block
ata: pata_parport-bpck6: merge ppc6_rd_port16_blk into bpck6_read_block
ata: pata_parport-bpck6: merge ppc6_wr_port into bpck6_write_regr
ata: pata_parport-bpck6: merge ppc6_rd_port into bpck6_read_regr
ata: pata_parport-bpck6: remove ppc6_close
...
dm-bufio's locking to allow increased concurrent IO -- particularly
for read access for buffers already in dm-bufio's cache.
- Also split dm-bio-prison-v1's spinlock and rbtree with comparable
aim at improving concurrent IO (for the DM thinp target).
- Both the dm-bufio and dm-bio-prison-v1 scaling of the number of
locks and rbtrees used are managed by dm_num_hash_locks(). And the
hash function used by both is dm_hash_locks_index().
- Allow DM targets to require DISCARD, WRITE_ZEROES and SECURE_ERASE
to be split at the target specified boundary (in terms of
max_discard_sectors, max_write_zeroes_sectors and
max_secure_erase_sectors respectively).
- DM verity error handling fix for check_at_most_once on FEC.
- Update DM verity target to emit audit events on verification failure
and more.
- DM core ->io_hints improvements needed in support of new discard
support that is added to the DM "zero" and "error" targets.
- Fix missing kmem_cache_destroy() call in initialization error path
of both the DM integrity and DM clone targets.
- A couple fixes for DM flakey, also add "error_reads" feature.
- Fix DM core's resume to not lock FS when the DM map is NULL;
otherwise initial table load can race with FS mount that takes
superblock's ->s_umount rw_semaphore.
- Various small improvements to both DM core and DM targets.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmRGtWwACgkQxSPxCi2d
A1pBqgf/W7op3/PdXBI+tlb7j05MEvMaZx0vz3l+qF36SMglaP1yZLZPiU9MCX2V
Sm2t4p7VEn5gAxvmzqa0/pLINC7u/m1IW9O6y3qdOEFAgwJ2st+/yaDqgguN5kiA
uOzecyDfR7n0WU5rkaO2EUneO7MrYweLR3IROFNFNHndl4bVJOafDcOJvmsI4YYe
5PIMHb+AGND+O2lIVOvSiPD6e85trcRWkr2X6DUYlllV3XEaBLke5MP1OAp+o/Y5
MFPfznnuiEvcFAzsBoDebC5j7RBQjHw12Bp8ltZV1ZFbdvluw9q1GD2/uyR5UolV
jmerZXKThV7lRJYqilUmt74Rxl2JSg==
=zPkM
-----END PGP SIGNATURE-----
Merge tag 'for-6.4/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Split dm-bufio's rw_semaphore and rbtree. Offers improvements to
dm-bufio's locking to allow increased concurrent IO -- particularly
for read access for buffers already in dm-bufio's cache.
- Also split dm-bio-prison-v1's spinlock and rbtree with comparable aim
at improving concurrent IO (for the DM thinp target).
- Both the dm-bufio and dm-bio-prison-v1 scaling of the number of locks
and rbtrees used are managed by dm_num_hash_locks(). And the hash
function used by both is dm_hash_locks_index().
- Allow DM targets to require DISCARD, WRITE_ZEROES and SECURE_ERASE to
be split at the target specified boundary (in terms of
max_discard_sectors, max_write_zeroes_sectors and
max_secure_erase_sectors respectively).
- DM verity error handling fix for check_at_most_once on FEC.
- Update DM verity target to emit audit events on verification failure
and more.
- DM core ->io_hints improvements needed in support of new discard
support that is added to the DM "zero" and "error" targets.
- Fix missing kmem_cache_destroy() call in initialization error path of
both the DM integrity and DM clone targets.
- A couple fixes for DM flakey, also add "error_reads" feature.
- Fix DM core's resume to not lock FS when the DM map is NULL;
otherwise initial table load can race with FS mount that takes
superblock's ->s_umount rw_semaphore.
- Various small improvements to both DM core and DM targets.
* tag 'for-6.4/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (40 commits)
dm: don't lock fs when the map is NULL in process of resume
dm flakey: add an "error_reads" option
dm flakey: remove trailing space in the table line
dm flakey: fix a crash with invalid table line
dm ioctl: fix nested locking in table_clear() to remove deadlock concern
dm: unexport dm_get_queue_limits()
dm: allow targets to require splitting WRITE_ZEROES and SECURE_ERASE
dm: add helper macro for simple DM target module init and exit
dm raid: remove unused d variable
dm: remove unnecessary (void*) conversions
dm mirror: add DMERR message if alloc_workqueue fails
dm: push error reporting down to dm_register_target()
dm integrity: call kmem_cache_destroy() in dm_integrity_init() error path
dm clone: call kmem_cache_destroy() in dm_clone_init() error path
dm error: add discard support
dm zero: add discard support
dm table: allow targets without devices to set ->io_hints
dm verity: emit audit events on verification failure and more
dm verity: fix error handling for check_at_most_once on FEC
dm: improve hash_locks sizing and hash function
...
-----BEGIN PGP SIGNATURE-----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=W1Zb
-----END PGP SIGNATURE-----
Merge tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- drbd patches, bringing us closer to unifying the out-of-tree version
and the in tree one (Andreas, Christoph)
- support for auto-quiesce for the s390 dasd driver (Stefan)
- MD pull request via Song:
- md/bitmap: Optimal last page size (Jon Derrick)
- Various raid10 fixes (Yu Kuai, Li Nan)
- md: add error_handlers for raid0 and linear (Mariusz Tkaczyk)
- NVMe pull request via Christoph:
- Drop redundant pci_enable_pcie_error_reporting (Bjorn Helgaas)
- Validate nvmet module parameters (Chaitanya Kulkarni)
- Fence TCP socket on receive error (Chris Leech)
- Fix async event trace event (Keith Busch)
- Minor cleanups (Chaitanya Kulkarni, zhenwei pi)
- Fix and cleanup nvmet Identify handling (Damien Le Moal,
Christoph Hellwig)
- Fix double blk_mq_complete_request race in the timeout handler
(Lei Yin)
- Fix irq locking in nvme-fcloop (Ming Lei)
- Remove queue mapping helper for rdma devices (Sagi Grimberg)
- use structured request attribute checks for nbd (Jakub)
- fix blk-crypto race conditions between keyslot management (Eric)
- add sed-opal support for reading read locking range attributes
(Ondrej)
- make fault injection configurable for null_blk (Akinobu)
- clean up the request insertion API (Christoph)
- clean up the queue running API (Christoph)
- blkg config helper cleanups (Tejun)
- lazy init support for blk-iolatency (Tejun)
- various fixes and tweaks to ublk (Ming)
- remove hybrid polling. It hasn't really been useful since we got
async polled IO support, and these days we don't support sync polled
IO at all (Keith)
- misc fixes, cleanups, improvements (Zhong, Ondrej, Colin, Chengming,
Chaitanya, me)
* tag 'for-6.4/block-2023-04-21' of git://git.kernel.dk/linux: (118 commits)
nbd: fix incomplete validation of ioctl arg
ublk: don't return 0 in case of any failure
sed-opal: geometry feature reporting command
null_blk: Always check queue mode setting from configfs
block: ublk: switch to ioctl command encoding
blk-mq: fix the blk_mq_add_to_requeue_list call in blk_kick_flush
block, bfq: Fix division by zero error on zero wsum
fault-inject: fix build error when FAULT_INJECTION_CONFIGFS=y and CONFIGFS_FS=m
block: store bdev->bd_disk->fops->submit_bio state in bdev
block: re-arrange the struct block_device fields for better layout
md/raid5: remove unused working_disks variable
md/raid10: don't call bio_start_io_acct twice for bio which experienced read error
md/raid10: fix memleak of md thread
md/raid10: fix memleak for 'conf->bio_split'
md/raid10: fix leak of 'r10bio->remaining' for recovery
md/raid10: don't BUG_ON() in raise_barrier()
md: fix soft lockup in status_resync
md: add error_handlers for raid0 and linear
md: Use optimal I/O size for last bitmap page
md: Fix types in sb writer
...
- Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
- New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features
being moved to VMMs rather than be implemented in the kernel.
- Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one.
This last part allows the NV timer code to be implemented on
top.
- A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
- The usual selftest fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmRCZIwPHG1hekBrZXJu
ZWwub3JnAAoJECPQ0LrRPXpDoZ8P/ioXAdDbAE4hTuyD2YdKJ3IGWN3pg52Z7xc2
rBXXFrbK9+n9FEc3AVdHoGsRPDP0Ynl+apj+aB0Klr/Fl0KKqac+W0ARX9rn1mI1
HjeygFPaGnXjMUp0BjeSLS+g3b0gebELJ6R1QEe1/MIPb8Se7M1y3ZpMWdhe0PPL
vyzw3LZq2OAlLgWKZhAfhh03qdr2kqJxypYs6nMrcexfn8dXT78dsYKW1nXmqKcE
61Gg23MDPUoexYpUhm+ym5t8hltoI1di8faPmxEpaFzpSDyAg8V5vo6LiW9jn3cf
RX0Sikk1laiRAhVbbIFCKC148vFyKxum3scpKyb91Qc+sK1kmIcxvEqlc6SfG9je
+5ndZwAfXtW6SMSOyX8y5fXbee7M0sx3n3le9BNgwXfmLWg/GHXJ544dJgVIlf/e
0Z+8QnP1IUDfARR/b2FlW7A7XLzNHQzO379ekcAdUptbGwlS9CrW6SJ83QR7K6fB
bh0aSSELKsD7pX8wnNyNACvmz2zL12ITlDKdZWUr8MSxyTjgVy7s0BDsQT3sbrA1
1sH++RvUWfC2k7tVT3vjZFzUDlPw3bnZmo5YMWRTMbXEdr1V5rDw5F5IXit13KeT
8bk0hnJgnLmyoX2A17v5dkFMIKD7p13tqDRdfFcn0ru63HIKxgkS3ITkDmsAQELK
DHT7RBE0
=Bhta
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.4
- Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
- New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features
being moved to VMMs rather than be implemented in the kernel.
- Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one.
This last part allows the NV timer code to be implemented on
top.
- A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
- The usual selftest fixes and improvements.
-----BEGIN PGP SIGNATURE-----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=Erfk
-----END PGP SIGNATURE-----
Merge tag 'for-6.4/io_uring-2023-04-21' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
- Cleanup of the io-wq per-node mapping, notably getting rid of it so
we just have a single io_wq entry per ring (Breno)
- Followup to the above, move accounting to io_wq as well and
completely drop struct io_wqe (Gabriel)
- Enable KASAN for the internal io_uring caches (Breno)
- Add support for multishot timeouts. Some applications use timeouts to
wake someone waiting on completion entries, and this makes it a bit
easier to just have a recurring timer rather than needing to rearm it
every time (David)
- Support archs that have shared cache coloring between userspace and
the kernel, and hence have strict address requirements for mmap'ing
the ring into userspace. This should only be parisc/hppa. (Helge, me)
- XFS has supported O_DIRECT writes without needing to lock the inode
exclusively for a long time, and ext4 now supports it as well. This
is true for the common cases of not extending the file size. Flag the
fs as having that feature, and utilize that to avoid serializing
those writes in io_uring (me)
- Enable completion batching for uring commands (me)
- Revert patch adding io_uring restriction to what can be GUP mapped or
not. This does not belong in io_uring, as io_uring isn't really
special in this regard. Since this is also getting in the way of
cleanups and improvements to the GUP code, get rid of if (me)
- A few series greatly reducing the complexity of registered resources,
like buffers or files. Not only does this clean up the code a lot,
the simplified code is also a LOT more efficient (Pavel)
- Series optimizing how we wait for events and run task_work related to
it (Pavel)
- Fixes for file/buffer unregistration with DEFER_TASKRUN (Pavel)
- Misc cleanups and improvements (Pavel, me)
* tag 'for-6.4/io_uring-2023-04-21' of git://git.kernel.dk/linux: (71 commits)
Revert "io_uring/rsrc: disallow multi-source reg buffers"
io_uring: add support for multishot timeouts
io_uring/rsrc: disassociate nodes and rsrc_data
io_uring/rsrc: devirtualise rsrc put callbacks
io_uring/rsrc: pass node to io_rsrc_put_work()
io_uring/rsrc: inline io_rsrc_put_work()
io_uring/rsrc: add empty flag in rsrc_node
io_uring/rsrc: merge nodes and io_rsrc_put
io_uring/rsrc: infer node from ctx on io_queue_rsrc_removal
io_uring/rsrc: remove unused io_rsrc_node::llist
io_uring/rsrc: refactor io_queue_rsrc_removal
io_uring/rsrc: simplify single file node switching
io_uring/rsrc: clean up __io_sqe_buffers_update()
io_uring/rsrc: inline switch_start fast path
io_uring/rsrc: remove rsrc_data refs
io_uring/rsrc: fix DEFER_TASKRUN rsrc quiesce
io_uring/rsrc: use wq for quiescing
io_uring/rsrc: refactor io_rsrc_ref_quiesce
io_uring/rsrc: remove io_rsrc_node::done
io_uring/rsrc: use nospec'ed indexes
...
Remove some unused features (related to lock timeouts) that have been
previously scheduled for removal.
Fix a bug where the pending callback flag would be incorrectly cleared,
which could potentially result in missing a completion callback.
Use an unbound workqueue for dlm socket handling so that socket
operations can be processed with less delay.
Fix possible lockspace join connection errors with large clusters (e.g.
over 16 nodes) caused by a small socket backlog setting.
Use atomic bit ops for internal flags to help avoid mistakes copying
flag values from messages.
Fix recently introduced bug where memory for lvb data could be
unnecessarily allocated for a lock.
-----BEGIN PGP SIGNATURE-----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=900J
-----END PGP SIGNATURE-----
Merge tag 'dlm-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
- Remove some unused features (related to lock timeouts) that have been
previously scheduled for removal
- Fix a bug where the pending callback flag would be incorrectly
cleared, which could potentially result in missing a completion
callback
- Use an unbound workqueue for dlm socket handling so that socket
operations can be processed with less delay
- Fix possible lockspace join connection errors with large clusters
(e.g. over 16 nodes) caused by a small socket backlog setting
- Use atomic bit ops for internal flags to help avoid mistakes copying
flag values from messages
- Fix recently introduced bug where memory for lvb data could be
unnecessarily allocated for a lock
* tag 'dlm-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
fs: dlm: stop unnecessarily filling zero ms_extra bytes
fs: dlm: switch lkb_sbflags to atomic ops
fs: dlm: rsb hash table flag value to atomic ops
fs: dlm: move internal flags to atomic ops
fs: dlm: change dflags to use atomic bits
fs: dlm: store lkb distributed flags into own value
fs: dlm: remove DLM_IFL_LOCAL_MS flag
fs: dlm: rename stub to local message flag
fs: dlm: remove deprecated code parts
DLM: increase socket backlog to avoid hangs with 16 nodes
fs: dlm: add unbound flag to dlm_io workqueue
fs: dlm: fix DLM_IFL_CB_PENDING gets overwritten
-----BEGIN PGP SIGNATURE-----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=Jt7p
-----END PGP SIGNATURE-----
Merge tag 'for-6.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Mostly core changes and cleanups, some notable fixes and two
performance improvements in directory logging.
The IO path cleanups are removing or refactoring old code, scrub main
loop has been completely rewritten also refactoring old code.
There are some changes to non-btrfs code, mostly trivial, the cgroup
punt bio logic is only moved from generic code.
Performance improvements:
- improve logging changes in a directory during one transaction,
avoid iterating over items and reduce lock contention (fsync time
4x lower)
- when logging directory entries during one transaction, reduce
locking of subvolume trees by checking tree-log instead
(improvement in throughput and latency for concurrent access to a
subvolume)
Notable fixes:
- dev-replace:
- properly honor read mode when requested to avoid reading from
source device
- target device won't be used for eventual read repair, this is
unreliable for NODATASUM files
- when there are unpaired (and unrepairable) metadata during
replace, exit early with error and don't try to finish whole
operation
- scrub ioctl properly rejects unknown flags
- fix global block reserve calculations
- fix partial direct io write when there's a page fault in the
middle, iomap will try to continue with partial request but the
btrfs part did not match that, this can lead to zeros written
instead of data
Core changes:
- io path:
- continued cleanups and refactoring around bio handling
- extent io submit path simplifications and cleanups
- flush write path simplifications and cleanups
- rework logic of passing sync mode of bio, with further cleanups
- rewrite scrub code flow, restructure how the stripes are enumerated
and verified in a more unified way
- allow to set lower threshold for block group reclaim in debug mode
to aid zoned mode testing
- remove obsolete time-based delayed ref throttling logic when
truncating items
- DREW locks are not using percpu variables anymore
- more warning fixes (-Wmaybe-uninitialized)
- u64 division simplifications
- error handling improvements
Non-btrfs code changes:
- push cgroup punt bio logic to btrfs code (there was no other user
of that), the functionality can be now selected separately by
BLK_CGROUP_PUNT_BIO
- crc32c_impl removed after removing last uses in btrfs code
- add btrfs_assertfail() to objtool table"
* tag 'for-6.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (147 commits)
btrfs: mark btrfs_assertfail() __noreturn
btrfs: fix uninitialized variable warnings
btrfs: use log root when iterating over index keys when logging directory
btrfs: avoid iterating over all indexes when logging directory
btrfs: dev-replace: error out if we have unrepaired metadata error during
btrfs: remove pointless loop at btrfs_get_next_valid_item()
btrfs: scrub: reject unsupported scrub flags
btrfs: reinterpret async discard iops_limit=0 as no delay
btrfs: set default discard iops_limit to 1000
btrfs: remove unused raid56 functions which were dedicated for scrub
btrfs: scrub: remove scrub_bio structure
btrfs: scrub: remove scrub_block and scrub_sector structures
btrfs: scrub: remove the old scrub recheck code
btrfs: scrub: remove the old writeback infrastructure
btrfs: scrub: remove scrub_parity structure
btrfs: scrub: use scrub_stripe to implement RAID56 P/Q scrub
btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure
btrfs: scrub: introduce helper to queue a stripe for scrub
btrfs: scrub: introduce error reporting functionality for scrub_stripe
btrfs: scrub: introduce a writeback helper for scrub_stripe
...
* The data=journal writepath has been significantly cleaned up and
simplified, and reduces a large number of data=journal special cases
by Jan Kara.
* Ojaswin Muhoo has replaced linked list used to track extents that
have been used for inode preallocation with a red-black tree in the
multi-block allocator. This improves performance for workloads
which do a large number of random allocating writes.
* Thanks to Kemeng Shi for a lot of cleanup and bug fixes in the
multi-block allocator.
* Matthew wilcox has converted the code paths for reading and writing
ext4 pages to use folios.
* Jason Yan has continued to factor out ext4_fill_super() into smaller
functions for improve ease of maintenance and comprehension.
* Josh Triplett has created an uapi header for ext4 userspace API's.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmRHS3IACgkQ8vlZVpUN
gaNN7AgAnFiWfk4UqKpBsUL5iQKJgf2K4tjlNXgPd6ghNns0IdFEyeWSHhr6KLv/
SQeoMMyiWaUcTvZs9DokD8U/9M1ELPUiE9W5c9GxJjM86SXp8BlLYSZTiRoNHzGJ
noQpvikj4qTRviK0rA3q5ICTP2eh1ECHMFJy2wcsZQgwnBelUejQHsTGtOwSvFWF
8wMdfuVtAFDZJjzOxzVKfHP22R5HVRWlAU7P1d97qKjBj4Se3+QchI+zdcIrmU9A
tTmCXj57NpTDyLjS9dIDmLygtTv93lOzOmZS8glw0BFonPcd3ObI4RHVxR+V9xu1
lN13YYgBrK6yfApn9L5XL/31PuLfbg==
=VLBx
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"There are a number of major cleanups in ext4 this cycle:
- The data=journal writepath has been significantly cleaned up and
simplified, and reduces a large number of data=journal special
cases by Jan Kara.
- Ojaswin Muhoo has replaced linked list used to track extents that
have been used for inode preallocation with a red-black tree in the
multi-block allocator. This improves performance for workloads
which do a large number of random allocating writes.
- Thanks to Kemeng Shi for a lot of cleanup and bug fixes in the
multi-block allocator.
- Matthew wilcox has converted the code paths for reading and writing
ext4 pages to use folios.
- Jason Yan has continued to factor out ext4_fill_super() into
smaller functions for improve ease of maintenance and
comprehension.
- Josh Triplett has created an uapi header for ext4 userspace API's"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (105 commits)
ext4: Add a uapi header for ext4 userspace APIs
ext4: remove useless conditional branch code
ext4: remove unneeded check of nr_to_submit
ext4: move dax and encrypt checking into ext4_check_feature_compatibility()
ext4: factor out ext4_block_group_meta_init()
ext4: move s_reserved_gdt_blocks and addressable checking into ext4_check_geometry()
ext4: rename two functions with 'check'
ext4: factor out ext4_flex_groups_free()
ext4: use ext4_group_desc_free() in ext4_put_super() to save some duplicated code
ext4: factor out ext4_percpu_param_init() and ext4_percpu_param_destroy()
ext4: factor out ext4_hash_info_init()
Revert "ext4: Fix warnings when freezing filesystem with journaled data"
ext4: Update comment in mpage_prepare_extent_to_map()
ext4: Simplify handling of journalled data in ext4_bmap()
ext4: Drop special handling of journalled data from ext4_quota_on()
ext4: Drop special handling of journalled data from ext4_evict_inode()
ext4: Fix special handling of journalled data from extent zeroing
ext4: Drop special handling of journalled data from extent shifting operations
ext4: Drop special handling of journalled data from ext4_sync_file()
ext4: Commit transaction before writing back pages in data=journal mode
...
Hi Linus,
Please, pull the following patches that transform zero-length and
one-element arrays into C99 flexible-array members. These patches
have been baking in linux-next for a while now.
Thanks
--
Gustavo
-----BEGIN PGP SIGNATURE-----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=RNbE
-----END PGP SIGNATURE-----
Merge tag 'flex-array-transformations-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull flexible-array updates from Gustavo Silva:
"Transform more zero-length and one-element arrays into C99
flexible-array members"
* tag 'flex-array-transformations-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
uapi: net: ipv6: Replace fake flex-array with flex-array member
drm/vmwgfx: Replace one-element array with flexible-array member
ASoC: uapi: Replace zero-length arrays with __DECLARE_FLEX_ARRAY() helper
Highlights:
- AMD PMC and PMF drivers:
- Numerous bugfixes
- Intel Speed Select Technology (ISST):
- TPMI (Topology Aware Register and PM Capsule Interface) support
for ISST support on upcoming processor models
- Various other improvements / new hw support
- tools/intel-speed-select: TPMI support + other improvements
- Intel In Field Scan (IFS):
- Add Array Bist test support
- New drivers:
- intel_bytcrc_pwrsrc Crystal Cove PMIC pwrsrc / reset-reason driver
- lenovo-ymc Yoga Mode Control driver for reporting SW_TABLET_MODE
- msi-ec Driver for MSI laptop EC features like battery charging limits
- apple-gmux:
- Support for new MMIO based models (T2 Macs)
- Honor acpi_backlight= auto-detect-code + kernel cmdline option
to switch between gmux and apple_bl backlight drivers and remove
own custom handling for this
- x86-android-tablets: Refactor / cleanup + new hw support
- Miscellaneous other cleanups / fixes
The following is an automated git shortlog grouped by driver:
Add driver for Yoga Tablet Mode switch:
- Add driver for Yoga Tablet Mode switch
Add intel_bytcrc_pwrsrc driver:
- Add intel_bytcrc_pwrsrc driver
Add new msi-ec driver:
- Add new msi-ec driver
Documentation/ABI:
- Update IFS ABI doc
ISST:
- unlock on error path in tpmi_sst_init()
- Add suspend/resume callbacks
- Add SST-TF support via TPMI
- Add SST-BF support via TPMI
- Add SST-PP support via TPMI
- Add SST-CP support via TPMI
- Parse SST MMIO and update instance
- Enumerate TPMI SST and create framework
- Add support for MSR 0x54
- Add API version of the target
- Add IOCTL default callback
- Add TPMI target
Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans:
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-hans
Merge tag 'ib-pdx86-backlight-6.4' into review-hans:
- Merge tag 'ib-pdx86-backlight-6.4' into review-hans
Move ideapad ACPI helpers to a new header:
- Move ideapad ACPI helpers to a new header
acer-wmi:
- Convert to platform remove callback returning void
acerhdf:
- Remove unneeded semicolon
adv_swbutton:
- Convert to platform remove callback returning void
amilo-rfkill:
- Convert to platform remove callback returning void
apple-gmux:
- Fix iomem_base __iomem annotation
- return -EFAULT if copy fails
- Update apple_gmux_detect documentation
- Add acpi_video_get_backlight_type() check
- add debugfs interface
- support MMIO gmux on T2 Macs
- refactor gmux types
- use first bit to check switch state
backlight:
- apple_bl: Use acpi_video_get_backlight_type()
barco-p50-gpio:
- Convert to platform remove callback returning void
classmate:
- mark SPI related data as maybe unused
compal-laptop:
- Convert to platform remove callback returning void
dell:
- dell-smo8800: Convert to platform remove callback returning void
- dcdbas: Convert to platform remove callback returning void
dell-laptop:
- Register ctl-led for speaker-mute
hp:
- tc1100-wmi: Convert to platform remove callback returning void
- hp_accel: Convert to platform remove callback returning void
huawei-wmi:
- Convert to platform remove callback returning void
ideapad-laptop:
- Convert to platform remove callback returning void
intel:
- vbtn: Convert to platform remove callback returning void
- telemetry: pltdrv: Convert to platform remove callback returning void
- pmc: core: Convert to platform remove callback returning void
- mrfld_pwrbtn: Convert to platform remove callback returning void
- int3472: discrete: Convert to platform remove callback returning void
- int1092: intel_sar: Convert to platform remove callback returning void
- int0002_vgpio: Convert to platform remove callback returning void
- hid: Convert to platform remove callback returning void
- chtwc_int33fe: Convert to platform remove callback returning void
- chtdc_ti_pwrbtn: Convert to platform remove callback returning void
- bxtwc_tmu: Convert to platform remove callback returning void
intel-uncore-freq:
- Add client processors
mlxbf-bootctl:
- Add sysfs file for BlueField boot fifo
pcengines-apuv2:
- Drop platform:pcengines-apuv2 module-alias
platform/mellanox:
- add firmware reset support
platform/olpc:
- olpc-xo175-ec: Use SPI device ID data to bind device
platform/surface:
- aggregator_registry: Add support for tablet-mode switch on Surface Pro 9
- aggregator_tabletsw: Add support for Type-Cover posture source
- aggregator_tabletsw: Properly handle different posture source IDs
platform/x86/amd:
- pmc: provide user message where s0ix is not supported
- pmc: Remove __maybe_unused from amd_pmc_suspend_handler()
- pmc: Convert to platform remove callback returning void
- pmc: Fix memory leak in amd_pmc_stb_debugfs_open_v2()
- pmc: Move out of BIOS SMN pair for STB init
- pmc: Utilize SMN index 0 for driver probe
- pmc: Move idlemask check into `amd_pmc_idlemask_read`
- pmc: Don't dump data after resume from s0i3 on picasso
- pmc: Hide SMU version and program attributes for Picasso
- pmc: Don't try to read SMU version on Picasso
- pmf: core: Convert to platform remove callback returning void
- hsmp: Convert to platform remove callback returning void
platform/x86/amd/pmf:
- Move out of BIOS SMN pair for driver probe
platform/x86/intel:
- vsec: Use intel_vsec_dev_release() to simplify init() error cleanup
- vsec: Explicitly enable capabilities
platform/x86/intel/ifs:
- Update IFS doc
- Implement Array BIST test
- Sysfs interface for Array BIST
- Introduce Array Scan test to IFS
- IFS cleanup
- Reorganize driver data
- Separate ifs_pkg_auth from ifs_data
platform/x86/intel/pmc/mtl:
- Put GNA/IPU/VPU devices in D3
platform/x86/intel/pmt:
- Ignore uninitialized entries
- Add INTEL_PMT module namespace
platform/x86/intel/sdsi:
- Change mailbox timeout
samsung-q10:
- Convert to platform remove callback returning void
serial-multi-instantiate:
- Convert to platform remove callback returning void
sony:
- mark SPI related data as maybe unused
think-lmi:
- Remove unnecessary casts for attributes
- Remove custom kobject sysfs_ops
- Properly interpret return value of tlmi_setting
thinkpad_acpi:
- Fix Embedded Controller access on X380 Yoga
tools/power/x86/intel-speed-select:
- Update version
- Change TRL display for Emerald Rapids
- Identify Emerald Rapids
- Display AMX base frequency
- Use cgroup v2 isolation
- Add missing free cpuset
- Fix clos-max display with TPMI I/F
- Add cpu id check
- Avoid setting duplicate tdp level
- Remove cpu mask display for non-cpu power domain
- Hide invalid TRL level
- Display fact info for non-cpu power domain
- Show level 0 name for new api_version
- Prevent cpu clos config for non-cpu power domain
- Allow display non-cpu power domain info
- Display amx_p1 and cooling_type
- Display punit info
- Introduce TPMI interface support
- Get punit core mapping information
- Introduce api_version helper
- Support large clos_min/max
- Introduce is_debug_enabled()
- Allow api_version based platform callbacks
- Move send_mbox_cmd to isst-core-mbox.c
- Abstract adjust_uncore_freq
- Abstract read_pm_config
- Abstract clos_associate
- Abstract clos_get_assoc_status
- Abstract set_clos
- Abstract pm_get_clos
- Abstract pm_qos_config
- Abstract get_clos_information
- Abstract get_get_trls
- Enhance get_tdp_info
- Abstract get_uncore_p0_p1_info
- Abstract get_fact_info
- Abstract set_pbf_fact_status
- Remove isst_get_pbf_info_complete
- Abstract get_pbf_info
- Abstract set_tdp_level
- Abstract get_trl_bucket_info
- Abstract get_get_trl
- Abstract get_coremask_info
- Abstract get_tjmax_info
- Move code right before its caller
- Abstract get_pwr_info
- Abstract get_tdp_info
- Abstract get_ctdp_control
- Abstract get_config_levels
- Abstract is_punit_valid
- Introduce isst-core-mbox.c
- Always invoke isst_fill_platform_info
- Introduce isst_get_disp_freq_multiplier
- Move mbox functions to isst-core.c
- Improve isst_print_extended_platform_info
- Rename for_each_online_package_in_set
- Introduce support for multi-punit
- Introduce isst_is_punit_valid()
- Introduce punit to isst_id
- Follow TRL nameing for FACT info
- Unify TRL levels
wmi:
- Convert to platform remove callback returning void
x86-android-tablets:
- Add accelerometer support for Yoga Tablet 2 1050/830 series
- Add "yogabook-touch-kbd-digitizer-switch" pdev for Lenovo Yoga Book
- Add Wacom digitizer info for Lenovo Yoga Book
- Update Yoga Book HiDeep touchscreen comment
- Add Lenovo Yoga Book X90F/L data
- Share lp855x_platform_data between different models
- Use LP8557 in direct mode on both the Yoga 830 and the 1050
- Add depends on PMIC_OPREGION
- Lenovo Yoga Book match is for YB1-X91 models only
- Add LID switch support for Yoga Tablet 2 1050/830 series
- Add backlight ctrl for Lenovo Yoga Tab 3 Pro YT3-X90F
- Add touchscreen support for Lenovo Yoga Tab 3 Pro YT3-X90F
- Add support for the Dolby button on Peaq C1010
- Add gpio_keys support to x86_android_tablet_init()
- Move remaining tablets to other.c
- Move Lenovo tablets to their own file
- Move Asus tablets to their own file
- Move shared power-supply fw-nodes to a separate file
- Move DMI match table into its own dmi.c file
- Move core code into new core.c file
- Move into its own subdir
- Add Acer Iconia One 7 B1-750 data
x86/include/asm/msr-index.h:
- Add IFS Array test bits
xo1-rfkill:
- Convert to platform remove callback returning void
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmRGmK4UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yBCAf+PebzfccC2ABHq+nFGSok18beRtFf
fGs9NI21Mjdbhhy+KsKddgZceh7pbdcaIznuka3TZAK0UXcHRe30X3eoDvSCk9YW
Xj/Uf3ExsipNh1Ung+Q1qTWtzUw7XdJWqMZ5HxlUI2ZlmSTAIOyZBpSEPrK052oi
lAbSqrnB1DEh1qYV4Q7g71R82iAR791DAH1dsDZwC1Zb6KK6fxI/zQhw4JP1XSCs
htE5RFUzPWiXG2ou5t6Nteju/QqEaCoIS7z7ZK/SgWcLlPxeksxwso3obI/U8PvD
JMmMiY4VFzizuGqTZHiy/EtKXo1pq+fOcMEqSuaaDfcYgdHmLm0OIU12Ig==
=51xc
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- AMD PMC and PMF drivers:
- Numerous bugfixes
- Intel Speed Select Technology (ISST):
- TPMI (Topology Aware Register and PM Capsule Interface) support
for ISST support on upcoming processor models
- Various other improvements / new hw support
- tools/intel-speed-select: TPMI support + other improvements
- Intel In Field Scan (IFS):
- Add Array Bist test support
- New drivers:
- intel_bytcrc_pwrsrc Crystal Cove PMIC pwrsrc / reset-reason driver
- lenovo-ymc Yoga Mode Control driver for reporting SW_TABLET_MODE
- msi-ec Driver for MSI laptop EC features like battery charging limits
- apple-gmux:
- Support for new MMIO based models (T2 Macs)
- Honor acpi_backlight= auto-detect-code + kernel cmdline option
to switch between gmux and apple_bl backlight drivers and remove
own custom handling for this
- x86-android-tablets: Refactor / cleanup + new hw support
- Miscellaneous other cleanups / fixes
* tag 'platform-drivers-x86-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (178 commits)
platform/x86: x86-android-tablets: Add accelerometer support for Yoga Tablet 2 1050/830 series
platform/x86: x86-android-tablets: Add "yogabook-touch-kbd-digitizer-switch" pdev for Lenovo Yoga Book
platform/x86: x86-android-tablets: Add Wacom digitizer info for Lenovo Yoga Book
platform/x86: x86-android-tablets: Update Yoga Book HiDeep touchscreen comment
platform/x86: thinkpad_acpi: Fix Embedded Controller access on X380 Yoga
platform/x86/intel/sdsi: Change mailbox timeout
platform/x86/intel/pmt: Ignore uninitialized entries
platform/x86: amd: pmc: provide user message where s0ix is not supported
platform/x86/amd: pmc: Fix memory leak in amd_pmc_stb_debugfs_open_v2()
mlxbf-bootctl: Add sysfs file for BlueField boot fifo
platform/x86: amd: pmc: Remove __maybe_unused from amd_pmc_suspend_handler()
platform/x86/intel/pmc/mtl: Put GNA/IPU/VPU devices in D3
platform/x86/amd: pmc: Move out of BIOS SMN pair for STB init
platform/x86/amd: pmc: Utilize SMN index 0 for driver probe
platform/x86/amd: pmc: Move idlemask check into `amd_pmc_idlemask_read`
platform/x86/amd: pmc: Don't dump data after resume from s0i3 on picasso
platform/x86/amd: pmc: Hide SMU version and program attributes for Picasso
platform/x86/amd: pmc: Don't try to read SMU version on Picasso
platform/x86/amd/pmf: Move out of BIOS SMN pair for driver probe
platform/x86: intel-uncore-freq: Add client processors
...
-----BEGIN PGP SIGNATURE-----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=ocor
-----END PGP SIGNATURE-----
Merge tag 'media/v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Removal of some old unused sensor drivers: ad9389b, m5mols, mt9m032,
mt9t001, noon010pc30, s5k6aa, sr030pc30 and vs6624
- New i.MX8 image sensor interface driver
- Some new RC keymaps
- lots of cleanups at atomisp driver to make it support standard
features present on other webcam drivers
- the cx18 and saa7146 now uses VB2
- lots of cleanups and driver improvements
* tag 'media/v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (460 commits)
media: ov5670: Fix probe on ACPI
media: nxp: imx8-isi: Remove 300ms sleep after enabling channel
media: nxp: imx8-isi: Replace udelay() with fsleep()
media: nxp: imx8-isi: Drop partial support for i.MX8QM and i.MX8QXP
media: nxp: Add i.MX8 ISI driver
media: dt-bindings: media: Add i.MX8 ISI DT bindings
media: atomisp: gmin_platform: Add Lenovo Ideapad Miix 310 gmin_vars
media: atomisp: gmin_platform: Make DMI quirks take precedence over the _DSM table
media: atomisp: Remove struct atomisp_sub_device index field
media: atomisp: Drop support for streaming from 2 sensors at once
media: atomisp: Remove atomisp_try_fmt() call from atomisp_set_fmt()
media: atomisp: Remove unused ATOM_ISP_MAX_WIDTH_TMP and ATOM_ISP_MAX_HEIGHT_TMP
media: atomisp: Remove snr_mbus_fmt local var from atomisp_try_fmt()
media: atomisp: Remove custom V4L2_CID_FMT_AUTO control
media: atomisp: Remove continuous mode related code from atomisp_set_fmt()
media: atomisp: Remove duplicate atomisp_[start|stop]_streaming() prototypes
media: atomisp: gc0310: Switch over to ACPI powermanagement
media: atomisp: gc0310: Use devm_kzalloc() for data struct
media: atomisp: gc0310: Add runtime-pm support
media: atomisp: gc0310: Delay power-on till streaming is started
...
New drivers:
- add QAIC acceleration driver
dma-buf:
- constify kobj_type structs
- Reject prime DMA-Buf attachment if get_sg_table is missing.
fbdev:
- cmdline parser fixes
- implement fbdev emulation for GEM DMA drivers
- always use shadow buffer in fbdev emulation helpers
dma-fence:
- add deadline hint to fences
- signal private stub fence
core:
- improve DisplayID 2.0 and EDID parsing
- add gem eviction function + callback
- prep to convert shmem helper to GEM resv lock
- move suballocator from radeon/amdgpu to core for Xe
- HPD polling fixes
- Documentation improvements
- Add atomic enable_plane callback
- use tgid instead of pid for client tracking
- DP: Add SDP Error Detection Configuration Register
- Add prime import/export to vram-helper
- use pci aperture helpers in more drivers
panel:
- Radxa 8/10HD support
- Samsung AMD495QA01 support
- Elida KD50T048A
- Sony TD4353
- Novatek NT36523
- STARRY 2081101QFH032011-53G
- B133UAN01.0
- AUO NE135FBM-N41
i915:
- More MTL enabling
- fix s/r problems with MEI/PXP
- Implement fb_dirty for PSR,FBC,DRRS fixes
- Fix eDP+DSI dual panel systems
- Fix issue #6333: "list_add corruption" and full system lockup from
performance monitoring
- Don't use stolen memory or BAR for ring buffers on LLC platforms
- Make sure DSM size has correct 1MiB granularity on Gen12+
- Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+
- Add engine TLB invalidation for Meteorlake
- Fix GSC races on driver load/unload on Meteorlake+
- Make kobj_type structures constant
- Move fd_install after last use of fence
- wm/vblank refactoring
- display code refactoring
- Create GSC submission targeting HDCP and PXP usages on MTL+
- Enable HDCP2.x via GSC CS
- Fix context runtime accounting on sysfs fdinfo for heavy workloads
- Use i915 instead of dev_priv insied the file_priv structure
- Replace fake flex-array with flexible-array member
amdgpu:
- Make kobj structures const
- Generalize dmabuf import to work with KFD
- Add capped/uncapped workload handling for supported APUs
- Expose additional memory stats via fdinfo
- Register vga_switcheroo for apple-gmux
- Initial NBIO7.9, GC 9.4.3, GFXHUB 1.2, MMHUB 1.8 support
- Initial DC FAM infrastructure
- Link DC backlight to connector device rather than PCI device
- Add sysfs nodes for secondary VCN clocks
amdkfd:
- Make kobj structures const
- Support for exporting buffers via dmabuf
- Multi-VMA page migration fixes
- initial GC 9.4.3 support
radeon:
- iMac fix
- convert to client based fbdev emulation
habanalabs:
- Add opcodes to the CS ioctl to allow user to stall/resume specific engines
inside Gaudi2.
- INFO ioctl the amount of device memory that the driver
and f/w reserve for themselves.
- INFO ioctl a bit-mask of the available rotator engines
- INFO ioctl the register's address of the f/w that should
be used to trigger interrupts
- INFO ioctl two new opcodes to fetch information on h/w and f/w events
- Enable graceful reset mechanism for compute-reset.
- Align to the latest firmware specs.
- Enforce the release order of the compute device and dma-buf.
msm:
- UBWC decoder programming rework
- SM8550, SM8450 bindings update
- uapi C++ fix
- a3xx and a4xx devfreq support
- GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
- dma-fence deadline hint support and wait-boost
- a640/650 speed bin support
cirrus:
- convert to regular atomic helpers
- add damage clipping
mediatek:
- 10-bit overlay support
- mt8195 support
- Only trigger DRM HPD events if bridge is attached
- Change the aux retries times when receiving AUX_DEFER
rockchip:
- add 4K support
vc4:
- use drm_gem_objects
virtio:
- allow KMS support to be disabled
- add damage clipping
vmwgfx:
- buffer object lifetime fixes
exynos:
- move MIPI DSI driver to drm bridge for iMX sharing
- use kernel fbdev emulation
panfrost:
- add support for mali MT81xx devices
- add speed binning support
lima:
- add usage stats
tegra:
- fbdev client conversion
vkms:
- Add primary plane positioning support
-----BEGIN PGP SIGNATURE-----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=NUEy
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-04-24' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"There is a new Qualcomm accel driver for their QAIC, dma-fence got a
deadline feature added, lots of refactoring around fbdev emulation,
and the usual pre-release hw enablements from AMD and Intel and fixes
everywhere.
New drivers:
- add QAIC acceleration driver
dma-buf:
- constify kobj_type structs
- Reject prime DMA-Buf attachment if get_sg_table is missing.
fbdev:
- cmdline parser fixes
- implement fbdev emulation for GEM DMA drivers
- always use shadow buffer in fbdev emulation helpers
dma-fence:
- add deadline hint to fences
- signal private stub fence
core:
- improve DisplayID 2.0 and EDID parsing
- add gem eviction function + callback
- prep to convert shmem helper to GEM resv lock
- move suballocator from radeon/amdgpu to core for Xe
- HPD polling fixes
- Documentation improvements
- Add atomic enable_plane callback
- use tgid instead of pid for client tracking
- DP: Add SDP Error Detection Configuration Register
- Add prime import/export to vram-helper
- use pci aperture helpers in more drivers
panel:
- Radxa 8/10HD support
- Samsung AMD495QA01 support
- Elida KD50T048A
- Sony TD4353
- Novatek NT36523
- STARRY 2081101QFH032011-53G
- B133UAN01.0
- AUO NE135FBM-N41
i915:
- More MTL enabling
- fix s/r problems with MEI/PXP
- Implement fb_dirty for PSR,FBC,DRRS fixes
- Fix eDP+DSI dual panel systems
- Fix issue #6333: "list_add corruption" and full system lockup from
performance monitoring
- Don't use stolen memory or BAR for ring buffers on LLC platforms
- Make sure DSM size has correct 1MiB granularity on Gen12+
- Whitelist COMMON_SLICE_CHICKEN3 for UMD access on Gen12+
- Add engine TLB invalidation for Meteorlake
- Fix GSC races on driver load/unload on Meteorlake+
- Make kobj_type structures constant
- Move fd_install after last use of fence
- wm/vblank refactoring
- display code refactoring
- Create GSC submission targeting HDCP and PXP usages on MTL+
- Enable HDCP2.x via GSC CS
- Fix context runtime accounting on sysfs fdinfo for heavy workloads
- Use i915 instead of dev_priv insied the file_priv structure
- Replace fake flex-array with flexible-array member
amdgpu:
- Make kobj structures const
- Generalize dmabuf import to work with KFD
- Add capped/uncapped workload handling for supported APUs
- Expose additional memory stats via fdinfo
- Register vga_switcheroo for apple-gmux
- Initial NBIO7.9, GC 9.4.3, GFXHUB 1.2, MMHUB 1.8 support
- Initial DC FAM infrastructure
- Link DC backlight to connector device rather than PCI device
- Add sysfs nodes for secondary VCN clocks
amdkfd:
- Make kobj structures const
- Support for exporting buffers via dmabuf
- Multi-VMA page migration fixes
- initial GC 9.4.3 support
radeon:
- iMac fix
- convert to client based fbdev emulation
habanalabs:
- Add opcodes to the CS ioctl to allow user to stall/resume specific
engines inside Gaudi2.
- INFO ioctl the amount of device memory that the driver and f/w
reserve for themselves.
- INFO ioctl a bit-mask of the available rotator engines
- INFO ioctl the register's address of the f/w that should be used to
trigger interrupts
- INFO ioctl two new opcodes to fetch information on h/w and f/w
events
- Enable graceful reset mechanism for compute-reset.
- Align to the latest firmware specs.
- Enforce the release order of the compute device and dma-buf.
msm:
- UBWC decoder programming rework
- SM8550, SM8450 bindings update
- uapi C++ fix
- a3xx and a4xx devfreq support
- GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
- dma-fence deadline hint support and wait-boost
- a640/650 speed bin support
cirrus:
- convert to regular atomic helpers
- add damage clipping
mediatek:
- 10-bit overlay support
- mt8195 support
- Only trigger DRM HPD events if bridge is attached
- Change the aux retries times when receiving AUX_DEFER
rockchip:
- add 4K support
vc4:
- use drm_gem_objects
virtio:
- allow KMS support to be disabled
- add damage clipping
vmwgfx:
- buffer object lifetime fixes
exynos:
- move MIPI DSI driver to drm bridge for iMX sharing
- use kernel fbdev emulation
panfrost:
- add support for mali MT81xx devices
- add speed binning support
lima:
- add usage stats
tegra:
- fbdev client conversion
vkms:
- Add primary plane positioning support"
* tag 'drm-next-2023-04-24' of git://anongit.freedesktop.org/drm/drm: (1495 commits)
drm/i915/dp_mst: Fix active port PLL selection for secondary MST streams
drm/exynos: Implement fbdev emulation as in-kernel client
drm/exynos: Initialize fbdev DRM client
drm/exynos: Remove fb_helper from struct exynos_drm_private
drm/exynos: Remove struct exynos_drm_fbdev
drm/exynos: Remove exynos_gem from struct exynos_drm_fbdev
drm/i915: Fix memory leaks in i915 selftests
drm/i915: Make intel_get_crtc_new_encoder() less oopsy
drm/i915/gt: Avoid out-of-bounds access when loading HuC
drm/amdgpu: add some basic elements for multiple XCD case
drm/amdgpu: move vmhub out of amdgpu_ring_funcs (v4)
Revert "drm/amdgpu: enable ras for mp0 v13_0_10 on SRIOV"
drm/amdgpu: add common ip block for GC 9.4.3
drm/amd/display: Add logging when DP link training Clock recovery is Successful
drm/amdgpu: add common early init support for GC 9.4.3
drm/amdgpu: switch to v9_4_3 gfx_funcs callbacks for GC 9.4.3
drm/amd/display: Add logging when setting DP sink power state fails
drm/amdkfd: Add gfx_target_version for GC 9.4.3
drm/amdkfd: Enable HW_UPDATE_RPTR on GC 9.4.3
drm/amdgpu: reserve the old gc_11_0_*_mes.bin
...
Takashi Iwai
Oswald Buddenhagen
Jaroslav Kysela
Linus Torvalds
Eric Blake
Chuck Lever
Paolo Bonzini