Pull ARM SoC fixes from Arnd Bergmann:
"The bulk of the changes this time are for device tree files in the
rockchips platform, addressing correctness issues on individual
boards, plus one change in the rk356x SoC file to make it match the
binding.
The only other changes that came in are
- a CPU frequencey scaling fix for JH7110 (RISC-V)
- a build fix for the cznic hwrandom driver
- a fix for a deadlock in qualcomm uefi secure application firmware
driver"
* tag 'arm-fixes-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
platform: cznic: turris-omnia-mcu: fix HW_RANDOM dependency
riscv: dts: starfive: jh7110-common: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz
firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire()
arm64: dts: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
dt-bindings: soc: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma
arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma
arm64: dts: rockchip: fix PMIC interrupt pin in pinctrl for ROCK Pi E
arm64: dts: rockchip: Remove broken tsadc pinctrl binding for rk356x
Pull ARM SoC fixes from Arnd Bergmann:
"There is a fairly large number of bug fixes for Qualcomm platforms,
most of them addressing issues with the devicetree files for the newly
added Snapdragon X1 based laptops to make them more reliable.
The Qualcomm driver changes address a few build-time issues as well as
runtime problems in the tzmem and scm firmware, the USB Type-C driver,
and the cmd-db and pmic_glink soc drivers.
The NXP i.MX usually gets a bunch of devicetree fixes that is
proportional to the number of supported machines. This includes both
warning fixes and correctness for the 64-bit i.MX9, i.MX8 and
layerscape platforms, as well as a single fix for a 32-bit i.MX6 based
board.
The other changes are the usual minor changes, including an update to
the MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs
(risc-v)"
* tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
firmware: microchip: fix incorrect error report of programming:timeout on success
soc: qcom: pd-mapper: Fix singleton refcount
firmware: qcom: tzmem: disable sdm670 platform
soc: qcom: pmic_glink: Actually communicate when remote goes down
usb: typec: ucsi: Move unregister out of atomic section
soc: qcom: pmic_glink: Fix race during initialization
firmware: qcom: qseecom: remove unused functions
firmware: qcom: tzmem: fix virtual-to-physical address conversion
firmware: qcom: scm: Mark get_wq_ctx() as atomic call
arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt
arm64: dts: qcom: disable GPU on x1e80100 by default
arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
arm64: dts: imx95: correct L3Cache cache-sets
arm64: dts: imx95: correct a55 power-domains
arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
arm64: dts: imx93: update default value for snps,clk-csr
arm64: dts: freescale: tqma9352: Fix watchdog reset
arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
...
Qualcomm driver fixes for v6.11
This corrects the tzmem virt-to-phys conversion, which caused issues for
the uefisecapp implementation of EFI variable access. SDM670 is excluded
from tzmem usage due to reported issues.
The SCM get wait queue context call is corrected to be marked ATOMIC and
some dead code in qseecom, following the tzmem conversion, is removed.
The memory backing command DB is remapped writecombined, to avoid XPU
violations when Linux runs without the Qualcomm hypervisor.
Two compile fixes are added for pd-mapper, and the broken reference
count is corrected, to make pd-mapper deal with remoteprocs going away.
In pmic_glink a race condition where the client callbacks might be
called before we returned the client handle is corrected. The broken conditions
for when to signal that the firmware is going down is also corrected.
In the pmic_glink UCSI driver, the ucsi_unregister() is moved out of the
pdr callback, as this is being invoked in atomic context.
Konrad's email address is updated in MAINTAINERS, and related mailmap
entries are added.
* tag 'qcom-drivers-fixes-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pd-mapper: Fix singleton refcount
firmware: qcom: tzmem: disable sdm670 platform
soc: qcom: pmic_glink: Actually communicate when remote goes down
usb: typec: ucsi: Move unregister out of atomic section
soc: qcom: pmic_glink: Fix race during initialization
firmware: qcom: qseecom: remove unused functions
firmware: qcom: tzmem: fix virtual-to-physical address conversion
firmware: qcom: scm: Mark get_wq_ctx() as atomic call
MAINTAINERS: Update Konrad Dybcio's email address
mailmap: Add an entry for Konrad Dybcio
soc: qcom: pd-mapper: mark qcom_pdm_domains as __maybe_unused
soc: qcom: cmd-db: Map shared memory as WC, not WB
soc: qcom: pd-mapper: Depend on ARCH_QCOM || COMPILE_TEST
Link: https://lore.kernel.org/r/20240826145209.1646159-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In aperture_remove_conflicting_pci_devices(), we currently only
call sysfb_disable() on vga class devices. This leads to the
following problem when the pimary device is not VGA compatible:
1. A PCI device with a non-VGA class is the boot display
2. That device is probed first and it is not a VGA device so
sysfb_disable() is not called, but the device resources
are freed by aperture_detach_platform_device()
3. Non-primary GPU has a VGA class and it ends up calling sysfb_disable()
4. NULL pointer dereference via sysfb_disable() since the resources
have already been freed by aperture_detach_platform_device() when
it was called by the other device.
Fix this by passing a device pointer to sysfb_disable() and checking
the device to determine if we should execute it or not.
v2: Fix build when CONFIG_SCREEN_INFO is not set
v3: Move device check into the mutex
Drop primary variable in aperture_remove_conflicting_pci_devices()
Drop __init on pci sysfb_pci_dev_is_enabled()
Fixes: 5ae3716cfd ("video/aperture: Only remove sysfb on the default vga pci device")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821191135.829765-1-alexander.deucher@amd.com
After successfully programming the SPI flash with an MFPS auto update
image, the error sysfs attribute reports programming:timeout.
This is caused by an incorrect check on the return value from
wait_for_completion_timeout() in mpfs_auto_update_poll_complete().
Fixes: ec5b0f1193 ("firmware: microchip: add PolarFire SoC Auto Update support")
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Currently get_wq_ctx() is wrongly configured as a standard call. When two
SMC calls are in sleep and one SMC wakes up, it calls get_wq_ctx() to
resume the corresponding sleeping thread. But if get_wq_ctx() is
interrupted, goes to sleep and another SMC call is waiting to be allocated
a waitq context, it leads to a deadlock.
To avoid this get_wq_ctx() must be an atomic call and can't be a standard
SMC call. Hence mark get_wq_ctx() as a fast call.
Fixes: 6bf3259922 ("firmware: qcom: scm: Add wait-queue handling logic")
Cc: stable@vger.kernel.org
Signed-off-by: Murali Nalajala <quic_mnalajal@quicinc.com>
Signed-off-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240814223244.40081-1-quic_uchalich@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Pull ARM updates from Russell King:
- ftrace: don't assume stack frames are contiguous in memory
- remove unused mod_inwind_map structure
- spelling fixes
- allow use of LD dead code/data elimination
- fix callchain_trace() return value
- add support for stackleak gcc plugin
- correct some reset asm function prototypes for CFI
[ Missed the merge window because Russell forgot to push out ]
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9408/1: mm: CFI: Fix some erroneous reset prototypes
ARM: 9407/1: Add support for STACKLEAK gcc plugin
ARM: 9406/1: Fix callchain_trace() return value
ARM: 9404/1: arm32: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION
ARM: 9403/1: Alpine: Spelling s/initialiing/initializing/
ARM: 9402/1: Kconfig: Spelling s/Cortex A-/Cortex-A/
ARM: 9400/1: Remove unused struct 'mod_unwind_map'
Pull more RISC-V updates from Palmer Dabbelt:
- Support for NUMA (via SRAT and SLIT), console output (via SPCR), and
cache info (via PPTT) on ACPI-based systems.
- The trap entry/exit code no longer breaks the return address stack
predictor on many systems, which results in an improvement to trap
latency.
- Support for HAVE_ARCH_STACKLEAK.
- The sv39 linear map has been extended to support 128GiB mappings.
- The frequency of the mtime CSR is now visible via hwprobe.
* tag 'riscv-for-linus-6.11-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits)
RISC-V: Provide the frequency of time CSR via hwprobe
riscv: Extend sv39 linear mapping max size to 128G
riscv: enable HAVE_ARCH_STACKLEAK
riscv: signal: Remove unlikely() from WARN_ON() condition
riscv: Improve exception and system call latency
RISC-V: Select ACPI PPTT drivers
riscv: cacheinfo: initialize cacheinfo's level and type from ACPI PPTT
riscv: cacheinfo: remove the useless input parameter (node) of ci_leaf_init()
RISC-V: ACPI: Enable SPCR table for console output on RISC-V
riscv: boot: remove duplicated targets line
trace: riscv: Remove deprecated kprobe on ftrace support
riscv: cpufeature: Extract common elements from extension checking
riscv: Introduce vendor variants of extension helpers
riscv: Add vendor extensions to /proc/cpuinfo
riscv: Extend cpufeature.c to detect vendor extensions
RISC-V: run savedefconfig for defconfig
RISC-V: hwprobe: sort EXT_KEY()s in hwprobe_isa_ext0() alphabetically
ACPI: NUMA: replace pr_info with pr_debug in arch_acpi_numa_init
ACPI: NUMA: change the ACPI_NUMA to a hidden option
ACPI: NUMA: Add handler for SRAT RINTC affinity structure
...
Add support for the stackleak feature. Whenever the kernel returns to user
space the kernel stack is filled with a poison value.
At the same time, disables the plugin in EFI stub code because EFI stub
is out of scope for the protection.
Tested on qemu and milkv duo:
/ # echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT
[ 38.675575] lkdtm: Performing direct entry STACKLEAK_ERASING
[ 38.678448] lkdtm: stackleak stack usage:
[ 38.678448] high offset: 288 bytes
[ 38.678448] current: 496 bytes
[ 38.678448] lowest: 1328 bytes
[ 38.678448] tracked: 1328 bytes
[ 38.678448] untracked: 448 bytes
[ 38.678448] poisoned: 14312 bytes
[ 38.678448] low offset: 8 bytes
[ 38.689887] lkdtm: OK: the rest of the thread stack is properly erased
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240623235316.2010-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull EFI fixes from Ard Biesheuvel:
- Wipe screen_info after allocating it from the heap - used by arm32
and EFI zboot, other EFI architectures allocate it statically
- Revert to allocating boot_params from the heap on x86 when entering
via the native PE entrypoint, to work around a regression on older
Dell hardware
* tag 'efi-fixes-for-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efistub: Revert to heap allocated boot_params for PE entrypoint
efi/libstub: Zero initialize heap allocated struct screen_info
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
Pull LoongArch updates from Huacai Chen:
- Define __ARCH_WANT_NEW_STAT in unistd.h
- Always enumerate MADT and setup logical-physical CPU mapping
- Add irq_work support via self IPIs
- Add RANDOMIZE_KSTACK_OFFSET support
- Add ARCH_HAS_PTE_DEVMAP support
- Add ARCH_HAS_DEBUG_VM_PGTABLE support
- Add writecombine support for DMW-based ioremap()
- Add architectural preparation for CPUFreq
- Add ACPI standard hardware register based S3 support
- Add support for relocating the kernel with RELR relocation
- Some bug fixes and other small changes
* tag 'loongarch-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Make the users of larch_insn_gen_break() constant
LoongArch: Check TIF_LOAD_WATCH to enable user space watchpoint
LoongArch: Use rustc option -Zdirect-access-external-data
LoongArch: Add support for relocating the kernel with RELR relocation
LoongArch: Remove a redundant checking in relocator
LoongArch: Use correct API to map cmdline in relocate_kernel()
LoongArch: Automatically disable KASLR for hibernation
LoongArch: Add ACPI standard hardware register based S3 support
LoongArch: Add architectural preparation for CPUFreq
LoongArch: Add writecombine support for DMW-based ioremap()
LoongArch: Add ARCH_HAS_DEBUG_VM_PGTABLE support
LoongArch: Add ARCH_HAS_PTE_DEVMAP support
LoongArch: Add RANDOMIZE_KSTACK_OFFSET support
LoongArch: Add irq_work support via self IPIs
LoongArch: Always enumerate MADT and setup logical-physical CPU mapping
LoongArch: Define __ARCH_WANT_NEW_STAT in unistd.h
Pull RISC-V updates from Palmer Dabbelt:
- Support for various new ISA extensions:
* The Zve32[xf] and Zve64[xfd] sub-extensios of the vector
extension
* Zimop and Zcmop for may-be-operations
* The Zca, Zcf, Zcd and Zcb sub-extensions of the C extension
* Zawrs
- riscv,cpu-intc is now dtschema
- A handful of performance improvements and cleanups to text patching
- Support for memory hot{,un}plug
- The highest user-allocatable virtual address is now visible in
hwprobe
* tag 'riscv-for-linus-6.11-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (58 commits)
riscv: lib: relax assembly constraints in hweight
riscv: set trap vector earlier
KVM: riscv: selftests: Add Zawrs extension to get-reg-list test
KVM: riscv: Support guest wrs.nto
riscv: hwprobe: export Zawrs ISA extension
riscv: Add Zawrs support for spinlocks
dt-bindings: riscv: Add Zawrs ISA extension description
riscv: Provide a definition for 'pause'
riscv: hwprobe: export highest virtual userspace address
riscv: Improve sbi_ecall() code generation by reordering arguments
riscv: Add tracepoints for SBI calls and returns
riscv: Optimize crc32 with Zbc extension
riscv: Enable DAX VMEMMAP optimization
riscv: mm: Add support for ZONE_DEVICE
virtio-mem: Enable virtio-mem for RISC-V
riscv: Enable memory hotplugging for RISC-V
riscv: mm: Take memory hotplug read-lock during kernel page table dump
riscv: mm: Add memory hotplugging support
riscv: mm: Add pfn_to_kaddr() implementation
riscv: mm: Refactor create_linear_mapping_range() for memory hot add
...
Currently, only TLB-based ioremap() support writecombine, so add the
counterpart for DMW-based ioremap() with help of DMW2. The base address
(WRITECOMBINE_BASE) is configured as 0xa000000000000000.
DMW3 is unused by kernel now, however firmware may leave garbage in them
and interfere kernel's address mapping. So clear it as necessary.
BTW, centralize the DMW configuration to macro SETUP_DMWINS.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Pull sound updates from Takashi Iwai:
"Lots of changes in this cycle, but mostly for cleanups and
refactoring.
Significant amount of changes are about DT schema conversions for ASoC
at this time while we see other usual suspects, too.
Some highlights below:
Core:
- Re-introduction of PCM sync ID support API
- MIDI2 time-base extension in ALSA sequencer API
ASoC:
- Syncing of features between simple-audio-card and the two
audio-graph cards
- Support for specifying the order of operations for components
within cards to allow quirking for unusual systems
- Lots of DT schema conversions
- Continued SOF/Intel updates for topology, SoundWire, IPC3/4
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5
and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments
PCM5242
HD-audio:
- More quirks, Intel PantherLake support, senarytech codec support
- Refactoring of Cirrus codec component-binding
Others:
- ALSA control kselftest improvements, and fixes for input value
checks in various drivers"
* tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (349 commits)
kselftest/alsa: Log the PCM ID in pcm-test
kselftest/alsa: Use card name rather than number in test names
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
ALSA: hda/tas2781: Add new quirk for Lenovo Hera2 Laptop
ALSA: seq: ump: Skip useless ports for static blocks
ALSA: pcm_dmaengine: Don't synchronize DMA channel when DMA is paused
ALSA: usb: Use BIT() for bit values
ALSA: usb: Fix UBSAN warning in parse_audio_unit()
ALSA: hda/realtek: Enable headset mic on Positivo SU C1400
ASoC: tas2781: Add new Kontrol to set tas2563 digital Volume
ASoC: codecs: wcd937x: Remove separate handling for vdd-buck supply
ASoC: codecs: wcd937x: Remove the string compare in MIC BIAS widget settings
ASoC: codecs: wcd937x-sdw: Fix Unbalanced pm_runtime_enable
ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema
ASoC: cs530x: Remove bclk from private structure
ASoC: cs530x: Calculate proper bclk rate using TDM
ASoC: dt-bindings: cirrus,cs4270: Convert to dtschema
firmware: cs_dsp: Rename fw_ver to wmfw_ver
firmware: cs_dsp: Clarify wmfw format version log message
firmware: cs_dsp: Make wmfw and bin filename arguments const char *
...
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- Virtio find vqs API has been reworked (required to fix the
scalability issue we have with adminq, which I hope to merge later
in the cycle)
- vDPA driver for Marvell OCTEON
- virtio fs performance improvement
- mlx5 migration speedups
Fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (56 commits)
virtio: rename virtio_find_vqs_info() to virtio_find_vqs()
virtio: remove unused virtio_find_vqs() and virtio_find_vqs_ctx() helpers
virtio: convert the rest virtio_find_vqs() users to virtio_find_vqs_info()
virtio_balloon: convert to use virtio_find_vqs_info()
virtiofs: convert to use virtio_find_vqs_info()
scsi: virtio_scsi: convert to use virtio_find_vqs_info()
virtio_net: convert to use virtio_find_vqs_info()
virtio_crypto: convert to use virtio_find_vqs_info()
virtio_console: convert to use virtio_find_vqs_info()
virtio_blk: convert to use virtio_find_vqs_info()
virtio: rename find_vqs_info() op to find_vqs()
virtio: remove the original find_vqs() op
virtio: call virtio_find_vqs_info() from virtio_find_single_vq() directly
virtio: convert find_vqs() op implementations to find_vqs_info()
virtio_pci: convert vp_*find_vqs() ops to find_vqs_info()
virtio: introduce virtio_queue_info struct and find_vqs_info() config op
virtio: make virtio_find_single_vq() call virtio_find_vqs()
virtio: make virtio_find_vqs() call virtio_find_vqs_ctx()
caif_virtio: use virtio_find_single_vq() for single virtqueue finding
vdpa/mlx5: Don't enable non-active VQs in .set_vq_ready()
...
This is a partial revert of commit
8117961d98f ("x86/efi: Disregard setup header of loaded image")
which triggers boot issues on older Dell laptops. As it turns out,
switching back to a heap allocation for the struct boot_params
constructed by the EFI stub works around this, even though it is unclear
why.
Cc: Christian Heusel <christian@heusel.eu>
Reported-by: <mavrix#kernel@simplelogin.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Pull MFD updates from Lee Jones:
"New Drivers:
- ROHM BD96801 Power Management IC
- Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Marvell 88PM886 Power Management IC
New Device Support:
- Keyboard Backlight to ChromeOS Embedded Controller
- LEDs to ChromeOS Embedded Controller
- Charge Control to ChromeOS Embedded Controller
- HW Monitoring Service to ChromeOS Embedded Controller
- AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
New Functionality:
- Allow Syscon consumers to supply their own Regmaps on registration
Fix-ups:
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid
simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
Bug Fixes:
- Ensure potentially asserted recent lines are deasserted during
initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings"
* tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (87 commits)
mfd: timberdale: Attach device properties to TSC2007 board info
mfd: tmio: Move header to platform_data
mfd: tmio: Sanitize comments
mfd: tmio: Update include files
mmc: tmio/sdhi: Fix includes
mfd: tmio: Remove obsolete io accessors
mfd: tmio: Remove obsolete platform_data
watchdog: bd96801_wdt: Add missing include for FIELD_*()
dt-bindings: mfd: syscon: Add APM poweroff mailbox
dt-bindings: mfd: syscon: Split and enforce documenting MFD children
dt-bindings: mfd: rk817: Merge support for RK809
dt-bindings: mfd: rk817: Fixup clocks and reference dai-common
dt-bindings: mfd: syscon: Add TI's opp table compatible
mfd: omap-usb-tll: Use struct_size to allocate tll
dt-bindings: mfd: Explain lack of child dependency in simple-mfd
dt-bindings: mfd: Dual licensing for st,stpmic1 bindings
mfd: omap-usb-tll: Annotate struct usbtll_omap with __counted_by
mfd: tps6594-core: Remove unneeded semicolon in tps6594_check_crc_mode()
mfd: lm3533: Move to new GPIO descriptor-based APIs
mfd: tps65912: Use devm helper functions to simplify probe
...
After calling uefi interface allocate_pool to apply for memory, we
should clear 0 to prevent the possibility of using random values.
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Cc: <stable@vger.kernel.org> # v6.6+
Fixes: 732ea9db9d ("efi: libstub: Move screen_info handling to common code")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Pull EFI updates from Ard Biesheuvel:
"Note the removal of the EFI fake memory map support - this is believed
to be unused and no longer worth supporting. However, we could easily
bring it back if needed.
With recent developments regarding confidential VMs and unaccepted
memory, combined with kexec, creating a known inaccurate view of the
firmware's memory map and handing it to the OS is a feature we can
live without, hence the removal. Alternatively, I could imagine making
this feature mutually exclusive with those confidential VM related
features, but let's try simply removing it first.
Summary:
- Drop support for the 'fake' EFI memory map on x86
- Add an SMBIOS based tweak to the EFI stub instructing the firmware
on x86 Macbook Pros to keep both GPUs enabled
- Replace 0-sized array with flexible array in EFI memory attributes
table handling
- Drop redundant BSS clearing when booting via the native PE
entrypoint on x86
- Avoid returning EFI_SUCCESS when aborting on an out-of-memory
condition
- Cosmetic tweak for arm64 KASLR loading logic"
* tag 'efi-next-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Replace efi_memory_attributes_table_t 0-sized array with flexible array
efi: Rename efi_early_memdesc_ptr() to efi_memdesc_ptr()
arm64/efistub: Clean up KASLR logic
x86/efistub: Drop redundant clearing of BSS
x86/efistub: Avoid returning EFI_SUCCESS on error
x86/efistub: Call Apple set_os protocol on dual GPU Intel Macs
x86/efistub: Enable SMBIOS protocol handling for x86
efistub/smbios: Simplify SMBIOS enumeration API
x86/efi: Drop support for fake EFI memory maps
Pull SoC driver updates from Arnd Bergmann:
"The updates to the mediatek, allwinner, ti, tegra, microchip, stm32,
samsung, imx, zynq and amlogic platoforms are fairly small maintenance
changes, either addressing minor mistakes or enabling additional
hardware.
The qualcomm platform changes add a number of features and are larger
than the other ones combined, introducing the use of linux/cleanup.h
across several drivers, adding support for Snapdragon X1E and other
SoCs in platform drivers, a new "protection domain mapper" driver, and
a "shared memory bridge" driver.
The cznic "turris omnia" router based on Marvell Armada gets a
platform driver that talks to the board specific microcontroller.
The reset and cache subsystems get a few minor updates to SoC specific
drivers, while the ff-a, scmi and optee firmware drivers get some code
refactoring and new features"
* tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (122 commits)
firmware: turris-mox-rwtm: Initialize completion before mailbox
firmware: turris-mox-rwtm: Fix checking return value of wait_for_completion_timeout()
firmware: turris-mox-rwtm: Do not complete if there are no waiters
MAINTAINERS: drop riscv list from cache controllers
platform: cznic: turris-omnia-mcu: fix Kconfig dependencies
bus: sunxi-rsb: Constify struct regmap_bus
soc: sunxi: sram: Constify struct regmap_config
platform: cznic: turris-omnia-mcu: Depend on WATCHDOG
platform: cznic: turris-omnia-mcu: Depend on OF
soc: samsung: exynos-pmu: add support for PMU_ALIVE non atomic registers
arm64: stm32: enable scmi regulator for stm32
firmware: qcom: tzmem: blacklist more platforms for SHM Bridge
soc: qcom: wcnss: simplify with cleanup.h
soc: qcom: pdr: simplify with cleanup.h
soc: qcom: ocmem: simplify with cleanup.h
soc: qcom: mdt_loader: simplify with cleanup.h
soc: qcom: llcc: simplify with cleanup.h
firmware: qcom: tzmem: simplify returning pointer without cleanup
soc: qcom: socinfo: Add PM6350 PMIC
arm64: dts: renesas: rz-smarc: Replace fixed regulator for USB VBUS
...
Initialize the completion before the mailbox channel is requested.
Fixes: 389711b374 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The wait_for_completion_timeout() function returns 0 if timed out, and a
positive value if completed. Fix the usage of this function.
Fixes: 389711b374 ("firmware: Add Turris Mox rWTM firmware driver")
Fixes: 2eab59cf0d ("firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Do not complete the "command done" completion if there are no waiters.
This can happen if a wait_for_completion() timed out or was interrupted.
Fixes: 389711b374 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull sound fixes from Takashi Iwai:
"The majority of changes here are small device-specific fixes for ASoC
SOF / Intel and usual HD-audio quirks.
The only significant high LOC is found in the Cirrus firmware driver,
but all those are for hardening against malicious firmware blobs, and
they look fine for taking as a last minute fix, too"
* tag 'sound-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Enable Mute LED on HP 250 G7
firmware: cs_dsp: Use strnlen() on name fields in V1 wmfw files
ALSA: hda/realtek: Limit mic boost on VAIO PRO PX
ALSA: hda: cs35l41: Fix swapped l/r audio channels for Lenovo ThinBook 13x Gen4
ASoC: SOF: Intel: hda-pcm: Limit the maximum number of periods by MAX_BDL_ENTRIES
ASoC: rt711-sdw: add missing readable registers
ASoC: SOF: Intel: hda: fix null deref on system suspend entry
ALSA: hda/realtek: add quirk for Clevo V5[46]0TU
firmware: cs_dsp: Prevent buffer overrun when processing V2 alg headers
firmware: cs_dsp: Validate payload length before processing block
firmware: cs_dsp: Return error if block header overflows file
firmware: cs_dsp: Fix overflow checking of wmfw header
While efi_memory_attributes_table_t::entry isn't used directly as an
array, it is used as a base for pointer arithmetic. The type is wrong
as it's not technically an array of efi_memory_desc_t's; they could be
larger. Regardless, leave the type unchanged and remove the old style
"0" array size. Additionally replace the open-coded entry offset code
with the existing efi_memdesc_ptr() helper.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Change the log message of the wmfw format version to include
the file name, and change the message to say "format" instead
of "Firmware version". Merge this with the message that logs
the timestamp.
The wmfw format version is information that is useful to have
logged because the behaviour of firmware controls depends on
the wmfw format. So "unexpected" behaviour could be caused by
having expectations based on one format of wmfw when a
different format has been loaded.
But the original message was confusing. It reported the file
format version but didn't actually log the name of the file it
referred to. It also called it "Firmware version", which is
confusing when a later message also logs a firmware version
that is the version of the actual firmware within the wmfw.
The logging of the firmware timestamp has been merged into this.
That was originally a dbg-only message, but as we are already
logging a line of info, we might as well add a few extra
characters to log the timestamp. The timestamp is now logged
in hexadecimal - it's not particularly useful as a decimal
value.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240710103640.78197-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't allocate a temporary buffer to hold a NUL-terminated copy
of the NAME/INFO string from the wmfw/bin. It can be printed
directly to the log. Also limit the maximum number of characters
that will be logged from this string.
The NAME/INFO blocks in the firmware files are an array of
characters with a length, not a NUL-terminated C string. The
original code allocated a temporary buffer to make a
NUL-terminated copy of the string and then passed that to
dev_info(). There's no need for this: printf formatting can
use "%.*s" to print a character array of a given length.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240710103640.78197-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A few more Qualcomm driver updates for v6.11
This adds a quirk to skip using the newly introduced SHM Bridge
implementation while regressions are being investigated.
One occurance of return no_free_ptr() is replaced with return_ptr() to
make code easier to read. llcc, mdt_loader, ocmem, pdr, socinfo and
wcnss drivers gets simplified using cleanup.h.
* tag 'qcom-drivers-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: tzmem: blacklist more platforms for SHM Bridge
soc: qcom: wcnss: simplify with cleanup.h
soc: qcom: pdr: simplify with cleanup.h
soc: qcom: ocmem: simplify with cleanup.h
soc: qcom: mdt_loader: simplify with cleanup.h
soc: qcom: llcc: simplify with cleanup.h
firmware: qcom: tzmem: simplify returning pointer without cleanup
soc: qcom: socinfo: Add PM6350 PMIC
Link: https://lore.kernel.org/r/20240709191246.3053-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm driver updates for v6.11
Support for Shared Memory (shm) Bridge is added, which provides a
stricter interface for handling of buffers passed to TrustZone.
The X1Elite platform is added to uefisecapp allow list, to instantiate
the efivars implementation.
A new in-kernel implementation of the pd-mapper (or servreg) service is
introduced, to replace the userspace dependency for USB Type-C and
battery management.
Support for sharing interrupts across multiple bwmon instances is added,
and a refcount imbalance issue is corrected.
The LLCC support for recent platforms is corrected, and SA8775P support
is added.
A new interface is added to SMEM, to expose "feature codes". One example
of the usecase for this is to indicate to the GPU driver which
frequencies are available on the given device.
The interrupt consumer and provider side of SMP2P is updated to provide
more useful names in interrupt stats.
Support for using the mailbox binding and driver for outgoing IPC
interrupt in the SMSM driver is introduced.
socinfo driver learns about SDM670 and IPQ5321, as well as get some
updates to the X1E PMICs.
pmic_glink is bumped to now support managing 3 USB Type-C ports.
* tag 'qcom-drivers-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (48 commits)
soc: qcom: smp2p: Use devname for interrupt descriptions
soc: qcom: smsm: Add missing mailbox dependency to Kconfig
soc: qcom: add missing pd-mapper dependencies
soc: qcom: icc-bwmon: Allow for interrupts to be shared across instances
dt-bindings: interconnect: qcom,msm8998-bwmon: Add X1E80100 BWMON instances
dt-bindings: interconnect: qcom,msm8998-bwmon: Remove opp-table from the required list
firmware: qcom: tzmem: export devm_qcom_tzmem_pool_new()
soc: qcom: add pd-mapper implementation
soc: qcom: pdr: extract PDR message marshalling data
soc: qcom: pdr: fix parsing of domains lists
soc: qcom: pdr: protect locator_addr with the main mutex
firmware: qcom: scm: clarify the comment in qcom_scm_pas_init_image()
firmware: qcom: scm: add support for SHM bridge memory carveout
firmware: qcom: tzmem: enable SHM Bridge support
firmware: qcom: scm: add support for SHM bridge operations
firmware: qcom: qseecom: convert to using the TZ allocator
firmware: qcom: scm: make qcom_scm_qseecom_app_get_id() use the TZ allocator
firmware: qcom: scm: make qcom_scm_lmh_dcvsh() use the TZ allocator
firmware: qcom: scm: make qcom_scm_ice_set_key() use the TZ allocator
firmware: qcom: scm: make qcom_scm_assign_mem() use the TZ allocator
...
Link: https://lore.kernel.org/r/20240705034410.13968-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
TI SoC driver updates for v6.11
- Update TISCI protocol URL link which was dead
- socinfo: Add j721E SR 2.0 detection support
- MAINTAINER list additions: ti,pruss.yaml and ti,j721e-system-controller.yaml
- pm33xx: log statement improvement
- knav_qmss: minor data structure optimization
* tag 'ti-driver-soc-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
dt-bindings: soc: ti: Move ti,j721e-system-controller.yaml to soc/ti
MAINTAINERS: Add entry for ti,pruss.yaml to TI KEYSTONE MULTICORE NAVIGATOR DRIVERS
soc: ti: k3-socinfo: Add J721E SR2.0
soc: ti: knav_qmss: Constify struct knav_range_ops
firmware: ti_sci: fix TISCI protocol URL link
dt-bindings: ti: fix TISCI protocol URL link
soc: ti: pm33xx: Fix missing newlines in log statements
Link: https://lore.kernel.org/r/20240705151449.s4rngkehjn73favn@stream
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
RISC-V firmware drivers for v6.11
Microchip:
Support for writing "bitstream info" to the flash using the auto-update
driver. At this point the "bitstream info" is a glorified dtbo wrapper,
but there's plans to add more info there in the future. Additionally,
rework some allocations in the driver and use scope-based cleanup on
them.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-firmware-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
firmware: microchip: use scope-based cleanup where possible
firmware: microchip: move buffer allocation into mpfs_auto_update_set_image_address()
firmware: microchip: support writing bitstream info to flash
Link: https://lore.kernel.org/r/20240707-lukewarm-film-8a9da40a1c27@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use strnlen() instead of strlen() on the algorithm and coefficient name
string arrays in V1 wmfw files.
In V1 wmfw files the name is a NUL-terminated string in a fixed-size
array. cs_dsp should protect against overrunning the array if the NUL
terminator is missing.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f6bc909e76 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs")
Link: https://patch.msgid.link/20240708144855.385332-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As it turns out, clearing the BSS was not the right fix for the issue
that was ultimately fixed by commit decd347c2a ("x86/efistub:
Reinstate soft limit for initrd loading"), and given that the Windows
EFI loader becomes very unhappy when entered with garbage in BSS, this
is one thing that x86 PC EFI implementations can be expected to get
right.
So drop it from the pure PE entrypoint. The handover protocol entrypoint
still needs this - it is used by the flaky distro bootloaders that
barely implement PE/COFF at all.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
