'MSR_PKG_CST_CONFIG_CONTROL' encodes the deepest allowed package C-state limit,
and turbostat decodes it.
Before this patch: turbostat does not recognize value "3" on Ice Lake Xeon
(ICX) and Sapphire Rapids Xeon (SPR), treats it as "unknown", and does not
display any package C-states in the results table.
After this patch: turbostat recognizes value 3 on ICX and SPR, treats it as
"PC6", and correctly displays package C-states in the results table.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This reverts commit 878aed8db3.
This change breaks existing setups where conntrack is used with
asymmetric paths.
In these cases, the NAT transformation occurs on the syn-ack instead of
the syn:
1. SYN x:12345 -> y -> 443 // sent by initiator, receiverd by responder
2. SYNACK y:443 -> x:12345 // First packet seen by conntrack, as sent by responder
3. tuple_force_port_remap() gets called, sees:
'tcp from 443 to port 12345 NAT' -> pick a new source port, inititor receives
4. SYNACK y:$RANDOM -> x:12345 // connection is never established
While its possible to avoid the breakage with NOTRACK rules, a kernel
update should not break working setups.
An alternative to the revert is to augment conntrack to tag
mid-stream connections plus more code in the nat core to skip NAT
for such connections, however, this leads to more interaction/integration
between conntrack and NAT.
Therefore, revert, users will need to add explicit nat rules to avoid
port shadowing.
Link: https://lore.kernel.org/netfilter-devel/20220302105908.GA5852@breakpoint.cc/#R
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2051413
Signed-off-by: Florian Westphal <fw@strlen.de>
Determine an available PCR bank to be used by a test case by querying the
capability TPM2_GET_CAP. The TPM2 returns TPML_PCR_SELECTIONS that
contains an array of TPMS_PCR_SELECTIONs indicating available PCR banks
and the bitmasks that show which PCRs are enabled in each bank. Collect
the data in a dictionary. From the dictionary determine the PCR bank that
has the PCRs enabled that the test needs. This avoids test failures with
TPM2's that either to not have a SHA-1 bank or whose SHA-1 bank is
disabled.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Dynamic linking when compiling on the host can cause issues when the
libc version does not match the one in the VM image. Update the
docs to explain how to do this.
Before:
./vmtest.sh -- ./test_progs -t test_ima
./test_progs: /usr/lib/libc.so.6: version `GLIBC_2.33' not found (required by ./test_progs)
After:
LDLIBS=-static ./vmtest.sh -- ./test_progs -t test_ima
test_ima:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Reported-by: "Geyslan G. Bem" <geyslan@gmail.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220307133048.1287644-1-kpsingh@kernel.org
Fix the following coccicheck warning:
tools/lib/bpf/bpf.c:114:31-32: WARNING: Use ARRAY_SIZE
tools/lib/bpf/xsk.c:484:34-35: WARNING: Use ARRAY_SIZE
tools/lib/bpf/xsk.c:485:35-36: WARNING: Use ARRAY_SIZE
It has been tested with gcc (Debian 8.3.0-6) 8.3.0 on x86_64.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220306023426.19324-1-guozhengkui@vivo.com
xsk_umem__create() does mmap for fill/comp rings, but xsk_umem__delete()
doesn't do the unmap. This works fine for regular cases, because
xsk_socket__delete() does unmap for the rings. But for the case that
xsk_socket__create_shared() fails, umem rings are not unmapped.
fill_save/comp_save are checked to determine if rings have already be
unmapped by xsk. If fill_save and comp_save are NULL, it means that the
rings have already been used by xsk. Then they are supposed to be
unmapped by xsk_socket__delete(). Otherwise, xsk_umem__delete() does the
unmap.
Fixes: 2f6324a393 ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Cheng Li <lic121@chinatelecom.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220301132623.GA19995@vscode.7~
Pull x86 spectre fixes from Borislav Petkov:
- Mitigate Spectre v2-type Branch History Buffer attacks on machines
which support eIBRS, i.e., the hardware-assisted speculation
restriction after it has been shown that such machines are vulnerable
even with the hardware mitigation.
- Do not use the default LFENCE-based Spectre v2 mitigation on AMD as
it is insufficient to mitigate such attacks. Instead, switch to
retpolines on all AMD by default.
- Update the docs and add some warnings for the obviously vulnerable
cmdline configurations.
* tag 'x86_bugs_for_v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation: Warn about eIBRS + LFENCE + Unprivileged eBPF + SMT
x86/speculation: Warn about Spectre v2 LFENCE mitigation
x86/speculation: Update link to AMD speculation whitepaper
x86/speculation: Use generic retpoline by default on AMD
x86/speculation: Include unprivileged eBPF status in Spectre v2 mitigation reporting
Documentation/hw-vuln: Update spectre doc
x86/speculation: Add eIBRS + Retpoline options
x86/speculation: Rename RETPOLINE_AMD to RETPOLINE_LFENCE
If the test triggers a problem it may well result in a log message from
the kernel such as a WARN() or BUG(). If these include a PID it can help
with debugging to know if it was the parent or child process that triggered
the issue, since the test is just creating a new thread the process name
will be the same either way. Print the PIDs of the parent and child on
startup so users have this information to hand should it be needed.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220303192817.2732509-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Pull virtio fixes from Michael Tsirkin:
"Some last minute fixes that took a while to get ready. Not
regressions, but they look safe and seem to be worth to have"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
tools/virtio: handle fallout from folio work
tools/virtio: fix virtio_test execution
vhost: remove avail_event arg from vhost_update_avail_event()
virtio: drop default for virtio-mem
vdpa: fix use-after-free on vp_vdpa_remove
virtio-blk: Remove BUG_ON() in virtio_queue_rq()
virtio-blk: Don't use MAX_DISCARD_SEGMENTS if max_discard_seg is zero
vhost: fix hung thread due to erroneous iotlb entries
vduse: Fix returning wrong type in vduse_domain_alloc_iova()
vdpa/mlx5: add validation for VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command
vdpa/mlx5: should verify CTRL_VQ feature exists for MQ
vdpa: factor out vdpa_set_features_unlocked for vdpa internal use
virtio_console: break out of buf poll on remove
virtio: document virtio_reset_device
virtio: acknowledge all features before access
virtio: unexport virtio_finalize_features
The type info is saved when using '-j save_type'. Output this in 'perf
script' so it can be accessed by other tools or for debugging.
It's appended to the end of the list of fields so any existing tools
that split on / and access fields via an index are not affected. Also
output '-' instead of 'N/A' when the branch type isn't saved because /
is used as a field separator.
Entries before this change look like this:
0xaaaadb350838/0xaaaadb3507a4/P/-/-/0
And afterwards like this:
0xaaaadb350838/0xaaaadb3507a4/P/-/-/0/CALL
or this if no type info is saved:
0x7fb57586df6b/0x7fb5758731f0/P/-/-/143/-
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220307171917.2555829-5-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This can help with debugging issues. It only prints when -j save_type
is used otherwise an empty string is printed.
Before the change:
101603801707130 0xa70 [0x630]: PERF_RECORD_SAMPLE(IP, 0x2): 1108/1108: 0xffff9c1df24c period: 10694 addr: 0
... branch stack: nr:64
..... 0: 0000ffff9c26029c -> 0000ffff9c26f340 0 cycles P 0
..... 1: 0000ffff9c2601bc -> 0000ffff9c26f340 0 cycles P 0
After the change:
101603801707130 0xa70 [0x630]: PERF_RECORD_SAMPLE(IP, 0x2): 1108/1108: 0xffff9c1df24c period: 10694 addr: 0
... branch stack: nr:64
..... 0: 0000ffff9c26029c -> 0000ffff9c26f340 0 cycles P 0 CALL
..... 1: 0000ffff9c2601bc -> 0000ffff9c26f340 0 cycles P 0 IND_CALL
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220307171917.2555829-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
EOPNOTSUPP is a possible return value when branch stacks are requested
but they aren't enabled in the kernel or hardware. It's also returned if
they aren't supported on the specific event type. The currently printed
error message about sampling/overflow-interrupts is not correct in this
case.
Add a check for branch stacks before sample_period is checked because
sample_period is also set (to the default value) when using branch
stacks.
Before this change (when branch stacks aren't supported):
perf record -j any
Error:
cycles: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat'
After this change:
perf record -j any
Error:
cycles: PMU Hardware or event type doesn't support branch stack sampling.
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220307171917.2555829-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add test for real address or control memory address access
error handling, using NX-GZIP engine.
The error is injected by accessing the control memory address
using illegal instruction, on successful handling the process
attempting to access control memory address using illegal
instruction receives SIGBUS.
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220107141428.67862-2-ganeshgr@linux.ibm.com
The nds32 architecture, also known as AndeStar V3, is a custom 32-bit
RISC target designed by Andes Technologies. Support was added to the
kernel in 2016 as the replacement RISC-V based V5 processors were
already announced, and maintained by (current or former) Andes
employees.
As explained by Alan Kao, new customers are now all using RISC-V,
and all known nds32 users are already on longterm stable kernels
provided by Andes, with no development work going into mainline
support any more.
While the port is still in a reasonably good shape, it only gets
worse over time without active maintainers, so it seems best
to remove it before it becomes unusable. As always, if it turns
out that there are mainline users after all, and they volunteer
to maintain the port in the future, the removal can be reverted.
Link: https://lore.kernel.org/linux-mm/YhdWNLUhk+x9RAzU@yamatobi.andestech.com/
Link: https://lore.kernel.org/lkml/20220302065213.82702-1-alankao@andestech.com/
Link: https://www.andestech.com/en/products-solutions/andestar-architecture/
Signed-off-by: Alan Kao <alankao@andestech.com>
[arnd: rewrite changelog to provide more background]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge a topic branch we are maintaining with some cross-architecture
changes to function descriptor handling and their use in LKDTM.
From Christophe's cover letter:
Fix LKDTM for PPC64/IA64/PARISC
PPC64/IA64/PARISC have function descriptors. LKDTM doesn't work on those
three architectures because LKDTM messes up function descriptors with
functions.
This series does some cleanup in the three architectures and refactors
function descriptors so that it can then easily use it in a generic way
in LKDTM.
Fit the following coccicheck warning:
tools/testing/selftests/net/reuseport_bpf_numa.c:89:28-29:
WARNING: Use ARRAY_SIZE.
It has been tested with gcc (Debian 8.3.0-6) 8.3.0 on x86_64.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test for percpu btf_type_tag. Similar to the "user" tag, we test
the following cases:
1. __percpu struct field.
2. __percpu as function parameter.
3. per_cpu_ptr() accepts dynamically allocated __percpu memory.
Because the test for "user" and the test for "percpu" are very similar,
a little bit of refactoring has been done in btf_tag.c. Basically, both
tests share the same function for loading vmlinux and module btf.
Example output from log:
> ./test_progs -v -t btf_tag
libbpf: prog 'test_percpu1': BPF program load failed: Permission denied
libbpf: prog 'test_percpu1': -- BEGIN PROG LOAD LOG --
...
; g = arg->a;
1: (61) r1 = *(u32 *)(r1 +0)
R1 is ptr_bpf_testmod_btf_type_tag_1 access percpu memory: off=0
...
test_btf_type_tag_mod_percpu:PASS:btf_type_tag_percpu 0 nsec
#26/6 btf_tag/btf_type_tag_percpu_mod1:OK
libbpf: prog 'test_percpu2': BPF program load failed: Permission denied
libbpf: prog 'test_percpu2': -- BEGIN PROG LOAD LOG --
...
; g = arg->p->a;
2: (61) r1 = *(u32 *)(r1 +0)
R1 is ptr_bpf_testmod_btf_type_tag_1 access percpu memory: off=0
...
test_btf_type_tag_mod_percpu:PASS:btf_type_tag_percpu 0 nsec
#26/7 btf_tag/btf_type_tag_percpu_mod2:OK
libbpf: prog 'test_percpu_load': BPF program load failed: Permission denied
libbpf: prog 'test_percpu_load': -- BEGIN PROG LOAD LOG --
...
; g = (__u64)cgrp->rstat_cpu->updated_children;
2: (79) r1 = *(u64 *)(r1 +48)
R1 is ptr_cgroup_rstat_cpu access percpu memory: off=48
...
test_btf_type_tag_vmlinux_percpu:PASS:btf_type_tag_percpu_load 0 nsec
#26/8 btf_tag/btf_type_tag_percpu_vmlinux_load:OK
load_btfs:PASS:could not load vmlinux BTF 0 nsec
test_btf_type_tag_vmlinux_percpu:PASS:btf_type_tag_percpu 0 nsec
test_btf_type_tag_vmlinux_percpu:PASS:btf_type_tag_percpu_helper 0 nsec
#26/9 btf_tag/btf_type_tag_percpu_vmlinux_helper:OK
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220304191657.981240-5-haoluo@google.com
Include a few verifier selftests that test against the problems being
fixed by previous commits, i.e. release kfunc always require
PTR_TO_BTF_ID fixed and var_off to be 0, and negative offset is not
permitted and returns a helpful error message.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-9-memxor@gmail.com
check_ptr_off_reg only allows fixed offset to be set for PTR_TO_BTF_ID,
where reg->off < 0 doesn't make sense. This would shift the pointer
backwards, and fails later in btf_struct_ids_match or btf_struct_walk
due to out of bounds access (since offset is interpreted as unsigned).
Improve the verifier by rejecting this case by using a better error
message for BPF helpers and kfunc, by putting a check inside the
check_func_arg_reg_off function.
Also, update existing verifier selftests to work with new error string.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-4-memxor@gmail.com
The error message when I build vm tests on debian10 (GLIBC 2.28):
userfaultfd.c: In function `userfaultfd_pagemap_test':
userfaultfd.c:1393:37: error: `MADV_PAGEOUT' undeclared (first use
in this function); did you mean `MADV_RANDOM'?
if (madvise(area_dst, test_pgsize, MADV_PAGEOUT))
^~~~~~~~~~~~
MADV_RANDOM
This patch includes these newer definitions from UAPI linux/mman.h, is
useful to fix tests build on systems without these definitions in glibc
sys/mman.h.
Link: https://lkml.kernel.org/r/20220227055330.43087-2-zhouchengming@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Building memblock simulator on x86_64 with 32BIT_PHYS_ADDR_T=1
produces "cast to pointer from integer of different size" warnings.
Fix them by building the binary in 32-bit environment when using
32-bit physical addresses.
Signed-off-by: Karolina Drobnik <karolinadrobnik@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Allow registering and unregistering custom handlers for BPF program.
This allows user applications and libraries to plug into libbpf's
declarative SEC() definition handling logic. This allows to offload
complex and intricate custom logic into external libraries, but still
provide a great user experience.
One such example is USDT handling library, which has a lot of code and
complexity which doesn't make sense to put into libbpf directly, but it
would be really great for users to be able to specify BPF programs with
something like SEC("usdt/<path-to-binary>:<usdt_provider>:<usdt_name>")
and have correct BPF program type set (BPF_PROGRAM_TYPE_KPROBE, as it is
uprobe) and even support BPF skeleton's auto-attach logic.
In some cases, it might be even good idea to override libbpf's default
handling, like for SEC("perf_event") programs. With custom library, it's
possible to extend logic to support specifying perf event specification
right there in SEC() definition without burdening libbpf with lots of
custom logic or extra library dependecies (e.g., libpfm4). With current
patch it's possible to override libbpf's SEC("perf_event") handling and
specify a completely custom ones.
Further, it's possible to specify a generic fallback handling for any
SEC() that doesn't match any other custom or standard libbpf handlers.
This allows to accommodate whatever legacy use cases there might be, if
necessary.
See doc comments for libbpf_register_prog_handler() and
libbpf_unregister_prog_handler() for detailed semantics.
This patch also bumps libbpf development version to v0.8 and adds new
APIs there.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20220305010129.1549719-3-andrii@kernel.org
Allow some BPF program types to support auto-attach only in subste of
cases. Currently, if some BPF program type specifies attach callback, it
is assumed that during skeleton attach operation all such programs
either successfully attach or entire skeleton attachment fails. If some
program doesn't support auto-attachment from skeleton, such BPF program
types shouldn't have attach callback specified.
This is limiting for cases when, depending on how full the SEC("")
definition is, there could either be enough details to support
auto-attach or there might not be and user has to use some specific API
to provide more details at runtime.
One specific example of such desired behavior might be SEC("uprobe"). If
it's specified as just uprobe auto-attach isn't possible. But if it's
SEC("uprobe/<some_binary>:<some_func>") then there are enough details to
support auto-attach. Note that there is a somewhat subtle difference
between auto-attach behavior of BPF skeleton and using "generic"
bpf_program__attach(prog) (which uses the same attach handlers under the
cover). Skeleton allow some programs within bpf_object to not have
auto-attach implemented and doesn't treat that as an error. Instead such
BPF programs are just skipped during skeleton's (optional) attach step.
bpf_program__attach(), on the other hand, is called when user *expects*
auto-attach to work, so if specified program doesn't implement or
doesn't support auto-attach functionality, that will be treated as an
error.
Another improvement to the way libbpf is handling SEC()s would be to not
require providing dummy kernel function name for kprobe. Currently,
SEC("kprobe/whatever") is necessary even if actual kernel function is
determined by user at runtime and bpf_program__attach_kprobe() is used
to specify it. With changes in this patch, it's possible to support both
SEC("kprobe") and SEC("kprobe/<actual_kernel_function"), while only in
the latter case auto-attach will be performed. In the former one, such
kprobe will be skipped during skeleton attach operation.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20220305010129.1549719-2-andrii@kernel.org
This patch updated the output info of chk_rm_nr. Renamed 'sf' to 'rmsf',
which means 'remove subflow'. Added the display of whether the inverted
namespaces has been used to check the mib counters.
The new output looks like this:
002 remove multiple subflows syn[ ok ] - synack[ ok ] - ack[ ok ]
rm [ ok ] - rmsf [ ok ]
003 remove single address syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
rm [ ok ] - rmsf [ ok ] invert
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added five more arguments for chk_join_nr(). The default
values of them are all zero.
The first two, csum_ns1 and csum_ns1, are passed to chk_csum_nr(), to
check the mib counters of the checksum errors in ns1 and ns2. A '+'
can be added into this two arguments to represent that multiple
checksum errors are allowed when doing this check. For example,
chk_csum_nr "" +2 +2
indicates that two or more checksum errors are allowed in both ns1 and
ns2.
The remaining two, fail_nr and rst_nr, are passed to chk_fail_nr() and
chk_rst_nr() respectively, to check the sending and receiving mib
counters of MP_FAIL and MP_RST.
Also did some cleanups in chk_fail_nr(), renamed two local variables
and updated the output message.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added the invert bytes check for the output data in
check_transfer().
Instead of the file mismatch error:
[ FAIL ] file received by server does not match (in, out):
-rw------- 1 root root 45643832 Jan 16 15:04 /tmp/tmp.9xpM6Paivv
Trailing bytes are:
MPTCP_TEST_FILE_END_MARKER
-rw------- 1 root root 45643832 Jan 16 15:04 /tmp/tmp.wnz1Yp4u7Z
Trailing bytes are:
MPTCP_TEST_FILE_END_MARKER
Print out the inverted bytes like this:
file received by server has inverted byte at 7454789
file received by server has inverted byte at 7454790
file received by server has inverted byte at 7454791
file received by server has inverted byte at 7454792
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added the self test for MP_FASTCLOSE. Reused the argument
addr_nr_ns2 of do_transfer() to pass the extra arguments '-I 2' to
mptcp_connect commands. Then mptcp_connect disconnected the
connections to trigger the MP_FASTCLOSE sending and receiving. Used
chk_fclose_nr to check the MP_FASTCLOSE mibs and used chk_rst_nr to
check the MP_RST mibs. This test used the test_linkfail value to make
1024KB test files.
The output looks like this:
Created /tmp/tmp.XB8sfv1hJ0 (size 1024 KB) containing data sent by client
Created /tmp/tmp.RtTDbzqrXI (size 1024 KB) containing data sent by server
001 fastclose test syn[ ok ] - synack[ ok ] - ack[ ok ]
ctx[ ok ] - fclzrx[ ok ]
rtx[ ok ] - rstrx [ ok ] invert
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch reused the test_linkfail values above 2 to make test files with
the given sizes (KB) for both the client side and the server side. It's
useful for the test cases using different file sizes.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of using a global variable mptcp_connect, this patch added
a new local variable extra_args in do_transfer() to store the extra
arguments passing to the mptcp_connect commands.
This patch also renamed the speed level 'least' to 'speed_*'. This
more flexible way can avoid the need to add new speed levels in the
future.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added a new function chk_rst_nr() to check the numbers
of the MP_RST sending and receiving mibs.
Showed in the output whether the inverted namespaces check order is used.
Since if we pass -Cz to mptcp_join.sh, the MP_RST information is showed
twice.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added a new function chk_fclose_nr() to check the numbers
of the MP_FASTCLOSE sending and receiving mibs.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The number of self tests in mptcp_join.sh will soon be more than 100, the
output alignment is no longer OK. This patch adjusted it.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-03-04
We've added 32 non-merge commits during the last 14 day(s) which contain
a total of 59 files changed, 1038 insertions(+), 473 deletions(-).
The main changes are:
1) Optimize BPF stackmap's build_id retrieval by caching last valid build_id,
as consecutive stack frames are likely to be in the same VMA and therefore
have the same build id, from Hao Luo.
2) Several improvements to arm64 BPF JIT, that is, support for JITing
the atomic[64]_fetch_add, atomic[64]_[fetch_]{and,or,xor} and lastly
atomic[64]_{xchg|cmpxchg}. Also fix the BTF line info dump for JITed
programs, from Hou Tao.
3) Optimize generic BPF map batch deletion by only enforcing synchronize_rcu()
barrier once upon return to user space, from Eric Dumazet.
4) For kernel build parse DWARF and generate BTF through pahole with enabled
multithreading, from Kui-Feng Lee.
5) BPF verifier usability improvements by making log info more concise and
replacing inv with scalar type name, from Mykola Lysenko.
6) Two follow-up fixes for BPF prog JIT pack allocator, from Song Liu.
7) Add a new Kconfig to allow for loading kernel modules with non-matching
BTF type info; their BTF info is then removed on load, from Connor O'Brien.
8) Remove reallocarray() usage from bpftool and switch to libbpf_reallocarray()
in order to fix compilation errors for older glibc, from Mauricio Vásquez.
9) Fix libbpf to error on conflicting name in BTF when type declaration
appears before the definition, from Xu Kuohai.
10) Fix issue in BPF preload for in-kernel light skeleton where loaded BPF
program fds prevent init process from setting up fd 0-2, from Yucong Sun.
11) Fix libbpf reuse of pinned perf RB map when max_entries is auto-determined
by libbpf, from Stijn Tintel.
12) Several cleanups for libbpf and a fix to enforce perf RB map #pages to be
non-zero, from Yuntao Wang.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (32 commits)
bpf: Small BPF verifier log improvements
libbpf: Add a check to ensure that page_cnt is non-zero
bpf, x86: Set header->size properly before freeing it
x86: Disable HAVE_ARCH_HUGE_VMALLOC on 32-bit x86
bpf, test_run: Fix overflow in XDP frags bpf_test_finish
selftests/bpf: Update btf_dump case for conflicting names
libbpf: Skip forward declaration when counting duplicated type names
bpf: Add some description about BPF_JIT_ALWAYS_ON in Kconfig
bpf, docs: Add a missing colon in verifier.rst
bpf: Cache the last valid build_id
libbpf: Fix BPF_MAP_TYPE_PERF_EVENT_ARRAY auto-pinning
bpf, selftests: Use raw_tp program for atomic test
bpf, arm64: Support more atomic operations
bpftool: Remove redundant slashes
bpf: Add config to allow loading modules with BTF mismatches
bpf, arm64: Feed byte-offset into bpf line info
bpf, arm64: Call build_prologue() first in first JIT pass
bpf: Fix issue with bpf preload module taking over stdout/stdin of kernel.
bpftool: Bpf skeletons assert type sizes
bpf: Cleanup comments
...
====================
Link: https://lore.kernel.org/r/20220304164313.31675-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Build of bpf and tc-testing selftests fails when the relative path of
the build directory is specified.
make -C tools/testing/selftests O=build0
make[1]: Entering directory '/linux_mainline/tools/testing/selftests/bpf'
../../../scripts/Makefile.include:4: *** O=build0 does not exist. Stop.
make[1]: Entering directory '/linux_mainline/tools/testing/selftests/tc-testing'
../../../scripts/Makefile.include:4: *** O=build0 does not exist. Stop.
Makefiles of bpf and tc-testing include scripts/Makefile.include file.
This file has sanity checking inside it which checks the output path.
The output path is not relative to the bpf or tc-testing. The sanity
check fails. Expand the output path to get rid of this error. The fix is
the same as mentioned in commit 150a27328b ("bpf, preload: Fix build
when $(O) points to a relative path").
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This patch fixed the following build error on openSUSE Leap 15.3:
=======================================================================
gcc nf-queue.c -lmnl -o tools/testing/selftests/netfilter/nf-queue
nf-queue.c:13:10: fatal error: libmnl/libmnl.h: No such file or directory
#include <libmnl/libmnl.h>
^~~~~~~~~~~~~~~~~
compilation terminated.
=======================================================================
It is because libmnl.h is put in the directory of
"/usr/include/libmnl/libmnl/" on openSUSE, not "/usr/include/libmnl/":
> rpm -ql libmnl-devel
/usr/include/libmnl
/usr/include/libmnl/libmnl
/usr/include/libmnl/libmnl/libmnl.h
/usr/lib64/libmnl.so
/usr/lib64/pkgconfig/libmnl.pc
Suggested-by: Kai Liu <kai.liu@suse.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
