This patch moves the KEYSC header file from the
SuperH specific asm directory to a place where
it can be shared by multiple architectures.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch adds platform data with a function for power
control to the SDHI driver. The idea is that board specific
code can provide their own functions so power can be enabled
and disabled for the sd-cards.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
fork() clones all thread_info flags, including
TIF_USER_RETURN_NOTIFY; if the new task is first scheduled on a cpu
which doesn't have user return notifiers set, this causes user
return notifiers to trigger without any way of clearing itself.
This is easy to trigger with a forky workload on the host in
parallel with kvm, resulting in a cpu in an endless loop on the
verge of returning to userspace.
Fix by dropping the TIF_USER_RETURN_NOTIFY immediately after fork.
Signed-off-by: Avi Kivity <avi@redhat.com>
LKML-Reference: <1259505288-16559-1-git-send-email-avi@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When retransmitting due to T3 timeout, retransmit all the
in-flight chunks for the corresponding transport/path, including
chunks sent less then 1 rto ago.
This is the correct behaviour according to rfc4960 section 6.3.3
E3 and
"Note: Any DATA chunks that were sent to the address for which the
T3-rtx timer expired but did not fit in one MTU (rule E3 above)
should be marked for retransmission and sent as soon as cwnd
allows (normally, when a SACK arrives). ".
This fixes problems when more then one path is present and the T3
retransmission of the first chunk that timeouts stops the T3 timer
for the initial active path, leaving all the other in-flight
chunks waiting forever or until a new chunk is transmitted on the
same path and timeouts (and this will happen only if the cwnd
allows sending new chunks, but since cwnd was dropped to MTU by
the timeout => it will wait until the first heartbeat).
Example: 10 packets in flight, sent at 0.1 s intervals on the
primary path. The primary path is down and the first packet
timeouts. The first packet is retransmitted on another path, the
T3 timer for the primary path is stopped and cwnd is set to MTU.
All the other 9 in-flight packets will not be retransmitted
(unless more new packets are sent on the primary path which depend
on cwnd allowing it, and even in this case the 9 packets will be
retransmitted only after a new packet timeouts which even in the
best case would be more then RTO).
This commit reverts d0ce92910b and
also removes the now unused transport->last_rto, introduced in
b6157d8e03.
p.s The problem is not only when multiple paths are there. It
can happen in a single homed environment. If the application
stops sending data, it possible to have a hung association.
Signed-off-by: Andrei Pelinescu-Onciul <andrei@iptel.org>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is an interface to set, delete and flush PMKIDs through nl80211.
Main users would be fullmac devices which firmwares are capable of
generating the RSN IEs for the re-association requests, e.g. iwmc3200wifi.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The RX flags should soon be used only for flags
that cannot change within an a-MPDU, so move the
cooked monitor flag into the RX status flags.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Most of the irq_req_t typedef'd struct can be re-worked quite
easily:
(1) IRQInfo2 was unused in any case, so drop it.
(2) IRQInfo1 was used write-only, so drop it.
(3) Instance (private data to be passed to the IRQ handler):
Most PCMCIA drivers using pcmcia_request_irq() to actually
register an IRQ handler set the "dev_id" to the same pointer
as the "priv" pointer in struct pcmcia_device. Modify the two
exceptions (ipwireless, ibmtr_cs) to also work this waym and
set the IRQ handler's "dev_id" to p_dev->priv unconditionally.
(4) Handler is to be of type irq_handler_t.
(5) Handler != NULL already tells whether an IRQ handler is present.
Therefore, we do not need the IRQ_HANDLER_PRESENT flag in
irq_req_t.Attributes.
CC: netdev@vger.kernel.org
CC: linux-bluetooth@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-scsi@vger.kernel.org
CC: alsa-devel@alsa-project.org
CC: Jaroslav Kysela <perex@perex.cz>
CC: Jiri Kosina <jkosina@suse.cz>
CC: Karsten Keil <isdn@linux-pingi.de>
for the Bluetooth parts: Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Logic changes based on top of the other patches:
This set of patches changed window_handle_t from being a pointer to an
unsigned long. The unsigned long is now a simple index into socket->win[].
Going from a pointer to unsigned long should leave the user space interface
unchanged unless I'm mistaken.
This change results in code that is less error prone and a user space
interface which is much cleaner and safer. A nice side effect is that we
are also are able to remove all members except one from window_t.
[ linux@dominikbrodowski.net:
Update to 2.6.31. Also, a plain "index" to socket->win[] does not
work, as several codepaths rely on "window_handle_t" being
non-zero if used. Therefore, set the window_handle_t to the
socket->win[] index + 1. ]
CC: netdev@vger.kernel.org
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
No logic changes, just pass struct pcmcia_socket to pcmcia_get_mem_page()
[linux@dominikbrodowski.net: update to 2.6.31]
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Kernel breakpoints are created using functions in which we pass
breakpoint parameters as individual variables: address, length
and type.
Although it fits well for x86, this just does not scale across
architectures that may support this api later as these may have
more or different needs. Pass in a perf_event_attr structure
instead because it is meant to evolve as much as possible into
a generic hardware breakpoint parameter structure.
Reported-by: K.Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1259294154-5197-2-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In-kernel user breakpoints are created using functions in which
we pass breakpoint parameters as individual variables: address,
length and type.
Although it fits well for x86, this just does not scale across
archictectures that may support this api later as these may have
more or different needs. Pass in a perf_event_attr structure
instead because it is meant to evolve as much as possible into
a generic hardware breakpoint parameter structure.
Reported-by: K.Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1259294154-5197-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently the UP/DOWN state of VLANs is synchronized to the state of the
underlying device, meaning all VLANs are set down once the underlying
device is set down. This causes all routes to the VLAN devices to vanish.
Add a flag to specify a "loose binding" mode, in which only the operstate
is transfered, but the VLAN device state is independant.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to support all three modes of macvlan at
runtime, extend the existing netlink protocol
to allow choosing the mode per macvlan slave
interface.
This depends on a matching patch to iproute2
in order to become accessible in user land.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The veth driver contains code to forward an skb
from the start_xmit function of one network
device into the receive path of another device.
Moving that code into a common location lets us
reuse the code for direct forwarding of data
between macvlan ports, and possibly in other
drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Async scanning introduced a very wide window where the SCSI device is
up and running but has not yet been added to sysfs. We delay the
adding until all scans have completed to retain the same ordering as
sync scanning.
This delay in visibility causes an oops if a device is removed before
we make it visible because the SCSI removal routines have an inbuilt
assumption that if a device is in SDEV_RUNNING state, it must be
visible (which is not necessarily true in the async scanning case).
Fix this by introducing an additional is_visible flag which we can use
to condition the tear down so we do the right thing for running but
not yet made visible.
Reported-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Use of msecs_to_jiffies() for nsecs_to_cputime() have some
problems:
- The type of msecs_to_jiffies()'s argument is unsigned int, so
it cannot convert msecs greater than UINT_MAX = about 49.7 days.
- msecs_to_jiffies() returns MAX_JIFFY_OFFSET if MSB of argument
is set, assuming that input was negative value. So it cannot
convert msecs greater than INT_MAX = about 24.8 days too.
This patch defines a new function nsecs_to_jiffies() that can
deal greater values, and that can deal all incoming values as
unsigned.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Spencer Candland <spencer@bluehost.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Amrico Wang <xiyou.wangcong@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <johnstul@linux.vnet.ibm.com>
LKML-Reference: <4B0E16E7.5070307@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Functions task_{u,s}time() are called in pair in almost all
cases. However task_stime() is implemented to call task_utime()
from its inside, so such paired calls run task_utime() twice.
It means we do heavy divisions (div_u64 + do_div) twice to get
utime and stime which can be obtained at same time by one set
of divisions.
This patch introduces a function task_times(*tsk, *utime,
*stime) to retrieve utime and stime at once in better, optimized
way.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Spencer Candland <spencer@bluehost.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
LKML-Reference: <4B0E16AE.906@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There seems to be a regression in direct write path due to following
commit in for-2.6.33 branch of block tree.
commit 1af60fbd75
Author: Jeff Moyer <jmoyer@redhat.com>
Date: Fri Oct 2 18:56:53 2009 -0400
block: get rid of the WRITE_ODIRECT flag
Marking direct writes as WRITE_SYNC_PLUG instead of WRITE_ODIRECT, sets
the NOIDLE flag in bio and hence in request. This tells CFQ to not expect
more request from the queue and not idle on it (despite the fact that
queue's think time is less and it is not seeky).
So direct writers lose big time when competing with sequential readers.
Using fio, I have run one direct writer and two sequential readers and
following are the results with 2.6.32-rc7 kernel and with for-2.6.33
branch.
Test
====
1 direct writer and 2 sequential reader running simultaneously.
[global]
directory=/mnt/sdc/fio/
runtime=10
[seqwrite]
rw=write
size=4G
direct=1
[seqread]
rw=read
size=2G
numjobs=2
2.6.32-rc7
==========
direct writes: aggrb=2,968KB/s
readers : aggrb=101MB/s
for-2.6.33 branch
=================
direct write: aggrb=19KB/s
readers aggrb=137MB/s
This patch brings back the WRITE_ODIRECT flag, with the difference that we
don't set the BIO_RW_UNPLUG flag so that device is not unplugged after
submission of request and an explicit unplug from submitter is required.
That way we fix the jeff's issue of not enough merging taking place in aio
path as well as make sure direct writes get their fair share.
After the fix
=============
for-2.6.33 + fix
----------------
direct writes: aggrb=2,728KB/s
reads: aggrb=103MB/s
Thanks
Vivek
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Mtdblock driver doesn't call flush_dcache_page for pages in request. So,
this causes problems on architectures where the icache doesn't fill from
the dcache or with dcache aliases. The patch fixes this.
The ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE symbol was introduced to avoid
pointless empty cache-thrashing loops on architectures for which
flush_dcache_page() is a no-op. Every architecture was provided with this
flush pages on architectires where ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE is
equal 1 or do nothing otherwise.
See "fix mtd_blkdevs problem with caches on some architectures" discussion
on LKML for more information.
Signed-off-by: Ilya Loginov <isloginov@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Peter Horton <phorton@bitbox.co.uk>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Use DECLARE_EVENT_CLASS to remove duplicate code:
text data bss dec hex filename
4312 524 12 4848 12f0 kernel/trace/power-traces.o.old
3455 524 8 3987 f93 kernel/trace/power-traces.o
Two events are converted:
power: power_start, power_frequency
No change in functionality.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <4B0E28C2.1090906@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use DECLARE_EVENT_CLASS to remove duplicate code:
text data bss dec hex filename
13171 800 72 14043 36db kernel/workqueue.o.old
12243 800 68 13111 3337 kernel/workqueue.o
Two events are converted:
workqueue: workqueue_insertion, workqueue_execution
No change in functionality.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0E289F.5010104@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use DECLARE_EVENT_CLASS to remove duplicate code:
text data bss dec hex filename
12781 952 36 13769 35c9 kernel/softirq.o.old
11981 952 32 12965 32a5 kernel/softirq.o
Two events are converted:
softirq: softirq_entry, softirq_exit
No change in functionality.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0E287F.4030708@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use DECLARE_EVENT_CLASS to remove duplicate code:
text data bss dec hex filename
29854 1980 128 31962 7cda kernel/module.o.old
28750 1980 128 30858 788a kernel/module.o
Two events are converted:
module_refcnt: module_get, module_put
No change in functionality.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0E283B.3010508@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It is not quite obvious at first sight what TRACE_EVENT_TEMPLATE
does: does it define an event as well beyond defining a template?
To clarify this, rename it to DECLARE_EVENT_CLASS, which follows
the various 'DECLARE_*()' idioms we already have in the kernel:
DECLARE_EVENT_CLASS(class)
DEFINE_EVENT(class, event1)
DEFINE_EVENT(class, event2)
DEFINE_EVENT(class, event3)
To complete this logic we should also rename TRACE_EVENT() to:
DEFINE_SINGLE_EVENT(single_event)
... but in a more quiet moment of the kernel cycle.
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0E286A.2000405@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Adding a xfrm_state requires an authentication algorithm specified
either as xfrm_algo or as xfrm_algo_auth with a specific truncation
length. For compatibility, both attributes are dumped to userspace,
and we also accept both attributes, but prefer the new syntax.
If no truncation length is specified, or the authentication algorithm
is specified using xfrm_algo, the truncation length from the algorithm
description in the kernel is used.
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new XFRMA_ALG_AUTH_TRUNC attribute taking a xfrm_algo_auth as
argument allows the installation of authentication algorithms with
a truncation length specified in userspace, i.e. SHA256 with 128 bit
instead of 96 bit truncation.
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current syscall tracer mixes raw syscalls and real syscalls.
echo 1 > events/syscalls/enable
And we get these from the output:
(XXXX insteads " grep-20914 [001] 588211.446347" .. etc)
XXXX: sys_read(fd: 3, buf: 80609a8, count: 7000)
XXXX: sys_enter: NR 3 (3, 80609a8, 7000, a, 1000, bfce8ef8)
XXXX: sys_read -> 0x138
XXXX: sys_exit: NR 3 = 312
XXXX: sys_read(fd: 3, buf: 8060ae0, count: 7000)
XXXX: sys_enter: NR 3 (3, 8060ae0, 7000, a, 1000, bfce8ef8)
XXXX: sys_read -> 0x138
XXXX: sys_exit: NR 3 = 312
There are 2 drawbacks here.
A) two almost identical records are saved in ringbuffer
when a syscall enters or exits. (4 records for every syscall)
This wastes precious space in the ring buffer.
B) the lines including "sys_enter/sys_exit" produces
hardly any useful information for the output (no labels).
The user can use this method to prevent these drawbacks:
echo 1 > events/syscalls/enable
echo 0 > events/syscalls/sys_enter/enable
echo 0 > events/syscalls/sys_exit/enable
But this is not user friendly. So we separate raw syscall
from syscall tracer.
After this fix applied:
syscall tracer's output (echo 1 > events/syscalls/enable):
XXXX: sys_read(fd: 3, buf: bfe87d88, count: 200)
XXXX: sys_read -> 0x200
XXXX: sys_fstat64(fd: 3, statbuf: bfe87c98)
XXXX: sys_fstat64 -> 0x0
XXXX: sys_close(fd: 3)
raw syscall tracer's output (echo 1 > events/raw_syscalls/enable):
XXXX: sys_enter: NR 175 (0, bf92bf18, bf92bf98, 8, b748cff4, bf92bef8)
XXXX: sys_exit: NR 175 = 0
XXXX: sys_enter: NR 175 (2, bf92bf98, 0, 8, b748cff4, bf92bef8)
XXXX: sys_exit: NR 175 = 0
XXXX: sys_enter: NR 3 (9, bf927f9c, 4000, b77e2518, b77dce60, bf92bff8)
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4AEFC37C.5080609@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
