Jonathan writes:
IIO: 2nd set of new device support, features and cleanup for 6.11
The big one here is we finally have Paul Cercueil's (and others)
DMA buffer support for IIO devices enabling high speed zero
copy transfer of data to and from sensors supported by IIO (and for
example USB). This should aid with upstream support of a range of
higher performance ADCs and DACs.
Two merges from other trees
- spi/spi_devm_optimize used for simplification in ad7944.
- dmaengine/topic_dma_vec to enable the DMABUF series.
One feature with impact outside IIO.
- Richer set of dev_err_probe() like helpers to cover ERR_PTR() cases.
New device support
==================
adi,ad7173
- Add support for AD4111, AD4112, AD4114, AD4115 and ADC4116 pseudo
differential ADCs. Major driver rework was needed to enabled these.
adi,ad7944
- Use devm_spi_optimize_message() to avoid a local devm cleanup
callback. This is the example case from the patch set, others will
follow.
mediatek,mt6359-auxadc
- New driver for this ADC IP found in MT6357, MT6358 and MT6359 PMICs.
st,accel
- Add support for the LIS2DS12 accelerometer
ti,ads1119
- New driver for this 16 bit 2-differential or 4-single ended channel
ADC.
Features
========
dt-bindings
- Introduce new common-mode-channel property to help handle pseudo
differential ADCs where we have something that looks like one side
of differential input, but which is only suited for use with a
slow moving reference.
adi,adf4350
- Support use as a clock provider.
iio-hmwon
- Support reading of labels from IIO devices by their consumers and
use this in the hwmon bridge.
Cleanup and minor fixes
=======================
Treewide
- Use regmap_clear_bits() / regmap_set_bits() to simplify open coded
equivalents.
- Use devm_regulator_get_enable_read_voltage() to replace equivalent
opencoded boilerplate. In some cases enabled complete conversion to
devm handling and removal of explicit remove() callbacks.
- Introduce dev_err_ptr_probe() and other variants and make use of
of them in a couple of examples driver cleanups. Will find use in
many more drivers soon.
adi,ad7192
- Introduce local struct device *dev and use dev_err_probe() to give
more readable code.
adi,adi-axi-adc/dac
- Improved consistency of messages using dev_err_probe()
adi,adis
- Split the trigger handling into cases that needed paging and those that
don't resulting in more readable code.
- Use cleanup.h to simplify error paths via scoped cleanup.
- Add adis specific lock helpers and make use of them in a number of drivers.
adi,ad7192
- Update maintainer (Alisa-Dariana Roman)
adi,ad7606
- dt-binding cleanup.
avago,apds9306
- Add a maintainer entry (Subhajit Ghosh)
linear,ltc2309
- Fix a wrong endian type.
st,stm32-dfsdm
- Fix a missing port property in the dt-binding.
st,sensors
- Relax whoami match failure to a warning print rather than probe failure.
This enables fallback compatibles to existing parts from those that don't
necessarily even exit yet.
* tag 'iio-for-6.11b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (112 commits)
iio: adc: ad7173: Fix uninitialized symbol is_current_chan
iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
math.h: Add unsigned 8 bits fractional numbers type
dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
iio: common: scmi_iio: convert to dev_err_probe()
iio: backend: make use of dev_err_cast_probe()
iio: temperature: ltc2983: convert to dev_err_probe()
dev_printk: add new dev_err_probe() helpers
iio: xilinx-ams: Add labels
iio: adc: ad7944: use devm_spi_optimize_message()
Documentation: iio: Document high-speed DMABUF based API
iio: buffer-dmaengine: Support new DMABUF based userspace API
iio: buffer-dma: Enable support for DMABUFs
iio: core: Add new DMABUF interface infrastructure
MAINTAINERS: Update AD7192 driver maintainer
iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
iio: st_sensors: relax WhoAmI check in st_sensors_verify_id()
MAINTAINERS: Add AVAGO APDS9306
dt-bindings: iio: adc: adi,ad7606: comment and sort the compatible names
dt-bindings: iio: adc: adi,ad7606: add missing datasheet link
...
Replace the duplicate ACPI "ROTM" data parsing code with the new
shared iio_read_acpi_mount_matrix() helper.
This also removes the limiting of the "ROTM" mount matrix to only ACPI
devices with an ACPI HID (Hardware-ID) of "KIOX000A". If kxcjk-1013 ACPI
devices with another HID have a ROTM method that should still be parsed
and if the method is not there then iio_read_acpi_mount_matrix() will
fail silently.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240425125754.76010-3-hdegoede@redhat.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a setup function implementation to the spi module to enable spi-3wire
when specified in the device-tree. If spi-3wire is not specified in the
device-tree, NULL is returned as bus pre-initialization. This behavior
is identical to the i2c initialization, hence the default initialization.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://lore.kernel.org/r/20240401194906.56810-9-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Provide a way for bus specific pre-configuration by adding a function
pointer argument to the driver core's probe() function, and keep
the driver core implementation bus independent.
In case NULL was passed, a regmap_write() shall initialize all bits of
the data_format register, else regmap_update() is used. In this way
spi and i2c are covered.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://lore.kernel.org/r/20240401194906.56810-6-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace write() data_format by regmap_update_bits() to keep bus specific
pre-configuration which might have happened before on the same register.
The bus specific bits in data_format register then need to be masked out,
Remove the data_range field from the struct adxl345_data, because it is
not used anymore.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://lore.kernel.org/r/20240401194906.56810-2-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There are 2 issues with interrupt handling in the mxc4005 driver:
1. mxc4005_set_trigger_state() writes MXC4005_REG_INT_MASK1_BIT_DRDYE
(0x01) to INT_MASK1 to enable the interrupt, but to disable the interrupt
it writes ~MXC4005_REG_INT_MASK1_BIT_DRDYE which is 0xfe, so it enables
all other interrupt sources in the INT_SRC1 register. On the MXC4005 this
is not an issue because only bit 0 of the register is used. On the MXC6655
OTOH this is a problem since bit7 is used as TC (Temperature Compensation)
disable bit and writing 1 to this disables Temperature Compensation which
should only be done when running self-tests on the chip.
Write 0 instead of ~MXC4005_REG_INT_MASK1_BIT_DRDYE to disable
the interrupts to fix this.
2. The datasheets for the MXC4005 / MXC6655 do not state what the reset
value for the INT_MASK0 and INT_MASK1 registers is and since these are
write only we also cannot learn this from the hw. Presumably the reset
value for both is all 0, which means all interrupts disabled.
Explicitly set both registers to 0 from mxc4005_chip_init() to ensure
both masks are actually set to 0.
Fixes: 79846e33aa ("iio: accel: mxc4005: add support for mxc6655")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240326113700.56725-2-hdegoede@redhat.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and a number of other driver
subsystem updates for 6.9-rc1. Included in here are:
- IIO driver updates, loads of new ones and evolution of existing ones
- coresight driver updates
- const cleanups for many driver subsystems
- speakup driver additions
- platform remove callback void cleanups
- mei driver updates
- mhi driver updates
- cdx driver updates for MSI interrupt handling
- nvmem driver updates
- other smaller driver updates and cleanups, full details in the
shortlog
All of these have been in linux-next for a long time with no reported
issue, other than a build warning for the speakup driver"
The build warning hits clang and is a gcc (and C23) extension, and is
fixed up in the merge.
Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/
* tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits)
binder: remove redundant variable page_addr
uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion
uio_pruss: UIO_MEM_DMA_COHERENT conversion
cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT
uio: introduce UIO_MEM_DMA_COHERENT type
cdx: add MSI support for CDX bus
pps: use cflags-y instead of EXTRA_CFLAGS
speakup: Add /dev/synthu device
speakup: Fix 8bit characters from direct synth
parport: sunbpp: Convert to platform remove callback returning void
parport: amiga: Convert to platform remove callback returning void
char: xillybus: Convert to platform remove callback returning void
vmw_balloon: change maintainership
MAINTAINERS: change the maintainer for hpilo driver
char: xilinx_hwicap: Fix NULL vs IS_ERR() bug
hpet: remove hpets::hp_clocksource
platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH
char: xilinx_hwicap: drop casting to void in dev_set_drvdata
greybus: move is_gb_* functions out of greybus.h
greybus: Remove usage of the deprecated ida_simple_xx() API
...
Jonathan writes:
IIO: 1st set of new device support, features and cleanup for 6.9
IIO Backend support
===================
New approach from Nuno Sa to the problem of reuse of drivers with
IIO devices that are actually the combination of a highspeed chip
and an FPGA core handling the data capture and flows. It will hopefully
also apply to some other split designs. The ad9467 and axi-adi drivers
are converted over to this framework.
New device support
==================
adi,admfm2000
- New driver for this dual microwave down converter.
ams,as73211
- Add support for as7331 UV sensor.
richtek,rtq6056
- Add support for related parts RTQ6053 and RTQ6059
st,lsm6dsx
- Add ASM330LHHXG1 accelerometer and gyro support (mainly IDs)
ti,ads1298
- New driver for this medical ADC.
Features
========
tests
- Unit tests for the gain-time-scale helper library.
bosch,bmi088
- I2C support.
bosh,bmi160
- Add 10EC5280 ACPI ID. Used in a number of devices that won't get fixed.
The ID is actually a PCI ID belonging to realtech. No response was received
to earlier attempts to notify them of this.
The manufacturers of some devices have replied to say they will not fix
this incorrect ID. Add the ID and hope it isn't a problem.
bosch,bmi323
- Add BOSC0200 ACPI ID. Note this is a duplicate of one in the bmc150
driver (it appears these parts share a windows driver).
Both drivers perform an ID check that is safe on the other part before
successfully probing.
hid-sensors-als
- Add color temperature and chromaticity support. Note this is a replacement
for the series reverted in 6.8 that correctly handles all the potential
channel combinations.
honeywell,hsc030pa
- Triggered buffer support (after driver cleanup).
honeywell,mprls00025pa
- Improved error handling.
- New DT binding to allow use of part number triplet as provided in data sheet
to specify equivalent of most of the binding more efficiently.
- SPI support.
memsic,mxc4005
- ACPI ID MDA6655 as seen in the Chuwi Minibook X 2023
ti,hdc3020
- Add threshold event support (after some driver cleanup)
veml,vcnl4000
- Switch to high resolution proximity measurement.
Cleanup
=======
Various minor typo fixes and better use of defines etc.
Treewide
- Stop using ACPI_PTR(). The savings in space are small and not worth
the complexity of __maybe_unused of ifdef guards. To avoid use in
new IIO drivers based on copy and paste, clean it out.
- cleanup.h based handling of iio_device_claim_direct_mode()/
iio_device_release_direct_mode() using scope_cond_guard().
In many drivers this is combined with other automated cleanup
to give maximum simplifications.
An initial set of drivers are converted over to this infrastructure.
Tools
- Use rewinddir() instead of seekdir() to return to start of file.
core
- Make iio_bus_type constant.
adi,ad16475
- Use irq_get_trigger_type() instead of opencoding.
adi,ad16480
- Use irq_get_trigger_type() instead of opencoding.
adi,ad-sigma-delta
- Avoid overwriting IRQ flags if provided by firmware.
ams,as73211
- Use IIO_VAL_FRACTIONAL for scales to simplify the code and potentially
improve accuracy.
gts-library
- Use a div64_u64() instead of a loop to do a division.
honeywell,mprls00025pa
- Clean up dt-binding doc.
- Drop defaults when DT binding not providing values. Very unlikely
these were useful given they were wrong for vast majority of supported
devices.
- Whitespace cleanup
miramems,da280
- Use i2c_get_match_data() to replace hand rolled ACPI matching code.
semtech,sx9324
- Avoid unnecessary copying of property strings.
st,lsm6dsx
- Improve docs, particularly wrt to making addition of new device
support less noisy.
st,lsm9ds0
- Use dev_err_probe() in all probe() error handling.
- Improved header includes.
- Tidy up termination of ID tables.
ti,ads1014
- Correct upper bound on PGA (wrong value had no actual impact)
ti,afe4403/4404
- devm_ useage to simplify error handling in probe() and allow() remove to
be dropped.
voltage-divider
- Add dt-binding for io-channel-cells to allow such a device to be both
an IIO consumer and IIO producer at the same time.
* tag 'iio-for-6.9a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (106 commits)
iio: imu: bmi323: Add ACPI Match Table
iio: accel: bmc150: Document duplicate ACPI entries with bmi323 driver
iio: adc: ti-ads1298: Add driver
dt-bindings: iio: adc: ti-ads1298: Add bindings
iio: pressure: hsc030pa add triggered buffer
iio: pressure: hsc030pa add mandatory delay
iio: pressure: hsc030pa: update datasheet URLs
iio: pressure: hsc030pa: include cleanup
iio: pressure: hsc030pa: use signed type to hold div_64() result
dt-bindings: iio: pressure: honeywell,hsc030pa.yaml add spi props
iio: st_sensors: lsm9ds0: Use common style for terminator in ID tables
iio: st_sensors: lsm9ds0: Don't use "proxy" headers
iio: st_sensors: lsm9ds0: Use dev_err_probe() everywhere
iio: adc: adi-axi-adc: move to backend framework
iio: adc: ad9467: convert to backend framework
iio: add the IIO backend framework
iio: buffer-dmaengine: export buffer alloc and free functions
of: property: add device link support for io-backends
dt-bindings: adc: axi-adc: update bindings for backend framework
dt-bindings: adc: ad9467: add new io-backend property
...
In general the complexity of avoiding maybe unused variable warnings is
not worth dealing with for the small amount of data saved. In thie
case, the i2c driver does include some other code under a CONFIG_ACPI
guard but remove the ACPI_PTR() usage anyway to bring keep it inline
with the spi driver.
Drop include of linux/acpi.h in the spi driver that doesn't need
it as struct acpi_device_id is defined in mod_devicetable.h which
is already included.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231231183514.566609-9-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
